haswell: pull in the init code for FUI
Removed two unnecessary register sets, and did the power well a bit more correctly. Also, added a register definition include file so we can used constants instead of magic numbers. We also set registers to common initialized values that are needed for FUI, VBIOS, and kernel. This set of registers appears to be an absolute bare minimum. Since we're hoping to use FUI for all chipsets from this one forward, we unconditionally do the setting here. Signed-off-by: Ronald G. Minnich <rminnich@google.com> Change-Id: Ife3f661ba010214d92b646b336f2b06645119f17 Reviewed-on: https://gerrit.chromium.org/gerrit/59988 Reviewed-by: Stefan Reinauer <reinauer@google.com> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Commit-Queue: Ronald G. Minnich <rminnich@chromium.org> Tested-by: Ronald G. Minnich <rminnich@chromium.org> Reviewed-on: http://review.coreboot.org/4328 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
This commit is contained in:
parent
7982de165e
commit
5bcca7e982
File diff suppressed because it is too large
Load Diff
|
@ -23,6 +23,7 @@
|
|||
#include <device/device.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <drivers/intel/gma/i915_reg.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "haswell.h"
|
||||
|
@ -88,6 +89,12 @@ static int gtt_poll(u32 reg, u32 mask, u32 value)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static void power_well_enable(void)
|
||||
{
|
||||
gtt_write(HSW_PWR_WELL_CTL1, HSW_PWR_WELL_ENABLE);
|
||||
gtt_poll(HSW_PWR_WELL_CTL1, HSW_PWR_WELL_STATE, HSW_PWR_WELL_STATE);
|
||||
}
|
||||
|
||||
static void gma_pm_init_pre_vbios(struct device *dev)
|
||||
{
|
||||
printk(BIOS_DEBUG, "GT Power Management Init\n");
|
||||
|
@ -96,6 +103,8 @@ static void gma_pm_init_pre_vbios(struct device *dev)
|
|||
if (!gtt_res || !gtt_res->base)
|
||||
return;
|
||||
|
||||
power_well_enable();
|
||||
|
||||
/*
|
||||
* Enable RC6
|
||||
*/
|
||||
|
@ -181,19 +190,85 @@ static void gma_setup_panel(struct device *dev)
|
|||
gtt_write(0xc8250, (1 << 31));
|
||||
gtt_write(0xc8254, conf->gpu_pch_backlight);
|
||||
}
|
||||
|
||||
/* Get display,pipeline,and DDI registers into a basic sane state */
|
||||
/* not all these have documented names. */
|
||||
gtt_write(0x45400, 0x80000000);
|
||||
gtt_poll( 0x00045400, 0xc0000000, 0xc0000000);
|
||||
gtt_write(_CURACNTR, 0x00000000);
|
||||
gtt_write(_DSPACNTR, (/* DISPPLANE_SEL_PIPE(0=A,1=B) */0x0<<24)|0x00000000);
|
||||
gtt_write(_DSPBCNTR, 0x00000000);
|
||||
gtt_write(CPU_VGACNTRL, 0x8000298e);
|
||||
gtt_write(_DSPASIZE+0xc, 0x00000000);
|
||||
gtt_write(_DSPBSURF, 0x00000000);
|
||||
gtt_write(0x4f008, 0x00000000);
|
||||
gtt_write(0x4f008, 0x00000000);
|
||||
gtt_write(0x4f008, 0x00000000);
|
||||
gtt_write(0x4f040, 0x01000001);
|
||||
gtt_write(0x4f044, 0x00000000);
|
||||
gtt_write(0x4f048, 0x00000000);
|
||||
gtt_write(0x4f04c, 0x03030000);
|
||||
gtt_write(0x4f050, 0x00000000);
|
||||
gtt_write(0x4f054, 0x00000001);
|
||||
gtt_write(0x4f058, 0x00000000);
|
||||
gtt_write(0x4f04c, 0x03450000);
|
||||
gtt_write(0x4f04c, 0x45450000);
|
||||
gtt_write(0x4f000, 0x03000400);
|
||||
gtt_write(DP_A, 0x00000091); /* DDI-A enable */
|
||||
gtt_write(_FDI_RXA_MISC, 0x00200090);
|
||||
gtt_write(_FDI_RXA_MISC, 0x0a000000);
|
||||
gtt_write(0x46408, 0x00000070);
|
||||
gtt_write(0x42090, 0x04000000);
|
||||
gtt_write(0x4f050, 0xc0000000);
|
||||
gtt_write(0x9840, 0x00000000);
|
||||
gtt_write(0x42090, 0xa4000000);
|
||||
gtt_write(SOUTH_DSPCLK_GATE_D, 0x00001000);
|
||||
gtt_write(0x42080, 0x00004000);
|
||||
gtt_write(0x64f80, 0x00ffffff);
|
||||
gtt_write(0x64f84, 0x0007000e);
|
||||
gtt_write(0x64f88, 0x00d75fff);
|
||||
gtt_write(0x64f8c, 0x000f000a);
|
||||
gtt_write(0x64f90, 0x00c30fff);
|
||||
gtt_write(0x64f94, 0x00060006);
|
||||
gtt_write(0x64f98, 0x00aaafff);
|
||||
gtt_write(0x64f9c, 0x001e0000);
|
||||
gtt_write(0x64fa0, 0x00ffffff);
|
||||
gtt_write(0x64fa4, 0x000f000a);
|
||||
gtt_write(0x64fa8, 0x00d75fff);
|
||||
gtt_write(0x64fac, 0x00160004);
|
||||
gtt_write(0x64fb0, 0x00c30fff);
|
||||
gtt_write(0x64fb4, 0x001e0000);
|
||||
gtt_write(0x64fb8, 0x00ffffff);
|
||||
gtt_write(0x64fbc, 0x00060006);
|
||||
gtt_write(0x64fc0, 0x00d75fff);
|
||||
gtt_write(0x64fc4, 0x001e0000);
|
||||
gtt_write(DDI_BUF_TRANS_A, 0x00ffffff);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x4, 0x0006000e);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x8, 0x00d75fff);
|
||||
gtt_write(DDI_BUF_TRANS_A+0xc, 0x0005000a);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x10, 0x00c30fff);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x14, 0x00040006);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x18, 0x80aaafff);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x1c, 0x000b0000);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x20, 0x00ffffff);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x24, 0x0005000a);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x28, 0x00d75fff);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x2c, 0x000c0004);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x30, 0x80c30fff);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x34, 0x000b0000);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x38, 0x00ffffff);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x3c, 0x00040006);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x40, 0x80d75fff);
|
||||
gtt_write(DDI_BUF_TRANS_A+0x44, 0x000b0000);
|
||||
gtt_write(DIGITAL_PORT_HOTPLUG_CNTRL,
|
||||
DIGITAL_PORTA_HOTPLUG_ENABLE |0x00000010);
|
||||
gtt_write(SDEISR+0x30,
|
||||
PORTD_HOTPLUG_ENABLE | PORTB_HOTPLUG_ENABLE |0x10100010);
|
||||
gtt_write(PCH_PP_DIVISOR, 0x0004af06);
|
||||
}
|
||||
|
||||
static void gma_pm_init_post_vbios(struct device *dev)
|
||||
{
|
||||
extern int oprom_is_loaded;
|
||||
|
||||
if (!oprom_is_loaded) {
|
||||
/* Magic to force graphics into happy state for kernel */
|
||||
gtt_write(0xc7204, 0xabcd000f); /* panel power up */
|
||||
gtt_write(0x45400, 0x80000000); /* power well enable */
|
||||
gtt_write(0x64000, 0x00000091); /* DDI-A enable */
|
||||
}
|
||||
|
||||
/* Disable Force Wake */
|
||||
gtt_write(0x0a188, 0x00010000);
|
||||
gtt_poll(0x130044, 1 << 0, 0 << 0);
|
||||
|
|
|
@ -123,7 +123,6 @@
|
|||
#define MCHBAR32(x) *((volatile u32 *)(DEFAULT_MCHBAR + x))
|
||||
#define MCHBAR32_OR(x, or) MCHBAR32(x) = (MCHBAR32(x) | (or))
|
||||
|
||||
#define SSKPD 0x5d14 /* 16bit (scratchpad) */
|
||||
#define BIOS_RESET_CPL 0x5da8 /* 8bit */
|
||||
|
||||
/*
|
||||
|
|
Loading…
Reference in New Issue