GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

new presents from artec group :-) 

Signed-off-by:  Indrek Kruusa   



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2411 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Indrek Kruusa 2006-09-13 21:25:20 +00:00 committed by Ronald G. Minnich
parent b9c100bdb7
commit 5c16ebde91
7 changed files with 1145 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

95
src/mainboard/artecgroup/dbe61/cs5536_usb.c Normal file
View File

@ -0,0 +1,95 @@
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <cpu/amd/lxdef.h>
#include <cpu/x86/msr.h>
#include "cs5536.h"
#define GLIU2_P2D_BM_1 0x51010021 // southbridge GLIU P2D base mask descriptor
#define USBMSRUOCB 0x5120000b // USB option controller base address register
#define UOCMUX (USBOC_BASE_ADDRESS + 4) // option controller native multiplex register
#define USBOC_BASE_ADDRESS 0xe1017000 // USB option contoller base address, used only here
#define USBOC_PORT4_FUNCTION 2 // USB port 4 desired function (0 = disabled, 2 = host, 3 = device)
static void ohci_init(struct device *dev)
{
uint32_t n;
msr_t msr;
printk_debug("USB: Setting up OHCI controller... ");
// enable controller bus mastering
n = pci_read_config32(dev, PCI_COMMAND);
pci_write_config32(dev, PCI_COMMAND,
n | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE);
// set the USB option controller base address
msr.hi = 0x0000000a;
msr.lo = USBOC_BASE_ADDRESS;
wrmsr(USBMSRUOCB, msr);
// create the GLIU memory mapping
msr.hi = 0x40000000 | ((USBOC_BASE_ADDRESS >> 24) & 0x000000ff);
msr.lo = ((USBOC_BASE_ADDRESS << 8) & 0xfff00000) | 0x000fffff;
wrmsr(GLIU2_P2D_BM_1, msr);
// set the multiplex register with port 4 function
*((uint32_t*)UOCMUX) = USBOC_PORT4_FUNCTION;
// finally, disable the USB option controller memory mapping
msr.hi = 0x000000ff;
msr.lo = 0xfff00000;
wrmsr(GLIU2_P2D_BM_1, msr);
printk_debug("done.\n");
}
static void ehci_init(struct device *dev)
{
uint32_t cmd;
printk_debug("USB: Setting up EHCI controller... ");
// enable controller bus mastering
cmd = pci_read_config32(dev, PCI_COMMAND);
pci_write_config32(dev, PCI_COMMAND,
cmd | PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
PCI_COMMAND_MASTER | PCI_COMMAND_INVALIDATE);
printk_debug("done.\n");
}
static struct device_operations ohci_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = ohci_init,
.scan_bus = 0,
.enable = southbridge_enable,
};
static struct device_operations ehci_ops = {
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.init = ehci_init,
.scan_bus = 0,
.enable = southbridge_enable,
};
static struct pci_driver cs5536_usb1_driver __pci_driver = {
.ops = &ohci_ops,
.vendor = PCI_VENDOR_ID_AMD,
.device = PCI_DEVICE_ID_AMD_CS5536_OHCI
};
static struct pci_driver cs5536_usb2_driver __pci_driver = {
.ops = &ehci_ops,
.vendor = PCI_VENDOR_ID_AMD,
.device = PCI_DEVICE_ID_AMD_CS5536_EHCI
};

2
src/mainboard/artecgroup/dbe61/realmode/Config.lb Normal file
View File

@ -0,0 +1,2 @@
config chip.h
driver vgabios.o

11
src/mainboard/artecgroup/dbe61/realmode/chip.h Normal file
View File

@ -0,0 +1,11 @@
#ifndef PCI_REALMODE_H
#define PCI_REALMODE_H
struct drivers_pci_realmode_config
{
unsigned long rom_address;
};
//struct chip_operations;
extern struct chip_operations drivers_pci_realmode_ops;
#endif

959
src/mainboard/artecgroup/dbe61/realmode/vgabios.c Normal file
View File

@ -0,0 +1,959 @@
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#undef __KERNEL__
#include <arch/io.h>
#include <string.h>
#include "chip.h"
/* vgabios.c. Derived from: */
/*------------------------------------------------------------ -*- C -*-
* 2 Kernel Monte a.k.a. Linux loading Linux on x86
*
* Erik Arjan Hendriks <hendriks@lanl.gov>
*
* This version is a derivative of the original two kernel monte
* which is (C) 2000 Scyld.
*
* Copyright (C) 2000 Scyld Computing Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* Portions related to the alpha architecture are:
*
* Copyright(C) 2001 University of California. LA-CC Number 01-67.
* This software has been authored by an employee or employees of the
* University of California, operator of the Los Alamos National
* Laboratory under Contract No. W-7405-ENG-36 with the U.S.
* Department of Energy. The U.S. Government has rights to use,
* reproduce, and distribute this software. If the software is
* modified to produce derivative works, such modified software should
* be clearly marked, so as not to confuse it with the version
* available from LANL.
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by
* reference to http://www.gnu.org/licenses/gpl.html.
*
* This software is provided by the author(s) "as is" and any express
* or implied warranties, including, but not limited to, the implied
* warranties of merchantability and fitness for a particular purpose
* are disclaimed. In no event shall the author(s) be liable for any
* direct, indirect, incidental, special, exemplary, or consequential
* damages (including, but not limited to, procurement of substitute
* goods or services; loss of use, data, or profits; or business
* interruption) however caused and on any theory of liability,
* whether in contract, strict liability, or tort (including
* negligence or otherwise) arising in any way out of the use of this
* software, even if advised of the possibility of such damage.
*
* $Id: vgabios.c,v 1.100 2006/09/12 15:31:49 indrek Exp $
*--------------------------------------------------------------------*/
/* Modified to be a self sufficient plug in so that it can be used
without reliance on other parts of core Linuxbios
(C) 2005 Nick.Barker9@btinternet.com
Used initially for epia-m where there are problems getting the bios
emulator to successfully run this bios.
*/
/*
Modified to be an universal driver for loading VGA ROMs.
Aug 2006, anti.sullin@artecdesign.ee, Artec Design
USAGE:
define in your motherboard Config.lb file in device hierarchy
around the VGA pci device realmode chip and define its rom address.
Rom address is read from Config.lb, this rom is then copied to 0xC000 and then excecuted
chip drivers/pci/realmode
device pci 1.1 on end # VGA
register "rom_address" = "0xfffc0000" # at the beginning of 256k
end
then, chip enable is called at this list first traversal, and this sets
up device's init callback. Device init is called during last list traversal and
so, other hw should be already initialized to run vga bios successfully.
*/
/* Declare a temporary global descriptor table - necessary because the
Core part of the bios no longer sets up any 16 bit segments */
__asm__ (
/* pointer to original gdt */
"gdtarg: \n"
" .word gdt_limit \n"
" .long gdt \n"
/* compute the table limit */
"__mygdt_limit = __mygdt_end - __mygdt - 1 \n"
"__mygdtaddr: \n"
" .word __mygdt_limit \n"
" .long __mygdt \n"
"__mygdt: \n"
/* selgdt 0, unused */
" .word 0x0000, 0x0000 \n"
" .byte 0x00, 0x00, 0x00, 0x00 \n"
/* selgdt 8, unused */
" .word 0x0000, 0x0000 \n"
" .byte 0x00, 0x00, 0x00, 0x00 \n"
/* selgdt 0x10, flat code segment */
" .word 0xffff, 0x0000 \n"
" .byte 0x00, 0x9b, 0xcf, 0x00 \n"
/* selgdt 0x18, flat data segment */
" .word 0xffff, 0x0000 \n"
" .byte 0x00, 0x93, 0xcf, 0x00 \n"
/* selgdt 0x20, unused */
" .word 0x0000, 0x0000 \n"
" .byte 0x00, 0x00, 0x00, 0x00 \n"
/* selgdt 0x28 16-bit 64k code at 0x00000000 */
" .word 0xffff, 0x0000 \n"
" .byte 0, 0x9a, 0, 0 \n"
/* selgdt 0x30 16-bit 64k data at 0x00000000 */
" .word 0xffff, 0x0000 \n"
" .byte 0, 0x92, 0, 0 \n"
"__mygdt_end: \n"
);
/* Declare a pointer to where our idt is going to be i.e. at mem zero */
__asm__ ("__myidt: \n"
/* 16-bit limit */
" .word 1023 \n"
/* 24-bit base */
" .long 0 \n"
" .word 0 \n"
);
/* The address arguments to this function are PHYSICAL ADDRESSES */
static void real_mode_switch_call_vga(unsigned long devfn)
{
__asm__ __volatile__ (
// paranoia -- does ecx get saved? not sure. This is
// the easiest safe thing to do.
" pushal \n"
/* save the stack */
" mov %esp, __stack \n"
" jmp 1f \n"
"__stack: .long 0 \n"
"1:\n"
/* get devfn into %ecx */
" movl %esp, %ebp \n"
" movl 8(%ebp), %ecx \n"
/* load 'our' gdt */
" lgdt %cs:__mygdtaddr \n"
/* This configures CS properly for real mode. */
" ljmp $0x28, $__rms_16bit\n"
"__rms_16bit: \n"
" .code16 \n"
/* 16 bit code from here on... */
/* Load the segment registers w/ properly configured segment
* descriptors. They will retain these configurations (limits,
* writability, etc.) once protected mode is turned off. */
" mov $0x30, %ax \n"
" mov %ax, %ds \n"
" mov %ax, %es \n"
" mov %ax, %fs \n"
" mov %ax, %gs \n"
" mov %ax, %ss \n"
/* Turn off protection (bit 0 in CR0) */
" movl %cr0, %eax \n"
" andl $0xFFFFFFFE, %eax \n"
" movl %eax, %cr0 \n"
/* Now really going into real mode */
" ljmp $0, $__rms_real\n"
"__rms_real: \n"
/* put the stack at the end of page zero.
* that way we can easily share it between real and protected,
* since the 16-bit ESP at segment 0 will work for any case. */
/* Setup a stack */
" mov $0x0, %ax \n"
" mov %ax, %ss \n"
" movl $0x1000, %eax \n"
" movl %eax, %esp \n"
/* Load our 16 it idt */
" xor %ax, %ax \n"
" mov %ax, %ds \n"
" lidt __myidt \n"
/* Dump zeros in the other segregs */
" mov %ax, %es \n"
" mov %ax, %fs \n"
" mov %ax, %gs \n"
" mov $0x40, %ax \n"
" mov %ax, %ds \n"
" mov %cx, %ax \n"
/* run VGA BIOS at 0xc000:0003 */
" lcall $0xc000, $0x0003\n"
/* if we got here, just about done.
* Need to get back to protected mode */
" movl %cr0, %eax \n"
" orl $0x0000001, %eax\n" /* PE = 1 */
" movl %eax, %cr0 \n"
/* Now that we are in protected mode jump to a 32 bit code segment. */
" data32 ljmp $0x10, $vgarestart\n"
"vgarestart:\n"
" .code32\n"
" movw $0x18, %ax \n"
" mov %ax, %ds \n"
" mov %ax, %es \n"
" mov %ax, %fs \n"
" mov %ax, %gs \n"
" mov %ax, %ss \n"
/* restore proper gdt and idt */
" lgdt %cs:gdtarg \n"
" lidt idtarg \n"
".globl vga_exit \n"
"vga_exit: \n"
" mov __stack, %esp \n"
" popal \n"
);
}
__asm__ (".text\n""real_mode_switch_end:\n");
extern char real_mode_switch_end[];
/* ============================================================================================
* run VGA ROM
* */
void do_vgabios(device_t dev)
{
unsigned long busdevfn;
unsigned int rom = dev->rom_address;
unsigned char *buf;
unsigned int size = 64*1024;
int i;
/* clear vga bios data area */
for (i = 0x400; i < 0x500; i++) {
*(unsigned char *) i = 0;
}
if (!dev) {
printk_debug("NO VGA FOUND\n");
return;
}
printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, dev->device);
/* declare rom address here - keep any config data out of the way
* of core LXB stuff */
//pci_write_config32(dev, PCI_ROM_ADDRESS, rom|1);
printk_debug("rom base, size: %x\n", rom);
buf = (unsigned char *) rom;
if ((buf[0] == 0x55) && (buf[1] == 0xaa)) {
memcpy((void *) 0xc0000, buf, size);
// write_protect_vgabios(); // in northbridge, not universal
// check signature again
buf = (unsigned char *) 0xc0000;
if (buf[0]==0x55 && buf[1]==0xAA) {
busdevfn = (dev->bus->secondary << 8) | dev->path.u.pci.devfn;
printk_debug("bus/devfn = %#x\n", busdevfn);
real_mode_switch_call_vga(busdevfn);
} else
printk_debug("Failed to copy VGA BIOS to 0xc0000\n");
} else
printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]);
pci_write_config32(dev, PCI_ROM_ADDRESS, 0);
}
/* ============================================================================================
/* call vga bios int 10 function 0x4f14 to enable main console
*
* vga bios does not always autosence the main console so forcing it on is good !!
* */
static void vga_enable_console(void)
{
__asm__ __volatile__ (
/* paranoia -- does ecx get saved? not sure. This is
* the easiest safe thing to do. */
" pushal \n"
/* save the stack */
" mov %esp, __stack \n"
/* load 'our' gdt */
" lgdt %cs:__mygdtaddr \n"
/* This configures CS properly for real mode. */
" ljmp $0x28, $__vga_ec_16bit\n"
"__vga_ec_16bit: \n"
" .code16 \n"
/* 16 bit code from here on... */
/* Load the segment registers w/ properly configured segment
* descriptors. They will retain these configurations (limits,
* writability, etc.) once protected mode is turned off. */
" mov $0x30, %ax \n"
" mov %ax, %ds \n"
" mov %ax, %es \n"
" mov %ax, %fs \n"
" mov %ax, %gs \n"
" mov %ax, %ss \n"
/* Turn off protection (bit 0 in CR0) */
" movl %cr0, %eax \n"
" andl $0xFFFFFFFE, %eax\n"
" movl %eax, %cr0 \n"
/* Now really going into real mode */
" ljmp $0, $__vga_ec_real \n"
"__vga_ec_real: \n"
/* put the stack at the end of page zero.
* that way we can easily share it between real and protected,
* since the 16-bit ESP at segment 0 will work for any case. */
/* Setup a stack */
" mov $0x0, %ax \n"
" mov %ax, %ss \n"
" movl $0x1000, %eax \n"
" movl %eax, %esp \n"
/* debugging for RGM */
" mov $0x11, %al \n"
" outb %al, $0x80 \n"
/* Load our 16 it idt */
" xor %ax, %ax \n"
" mov %ax, %ds \n"
" lidt __myidt \n"
/* Dump zeros in the other segregs */
" mov %ax, %ds \n"
" mov %ax, %es \n"
" mov %ax, %fs \n"
" mov %ax, %gs \n"
/* ask bios to enable main console */
/* set up for int 10 call - values found from X server
* bios call routines */
" movw $0x4f14,%ax \n"
" movw $0x8003,%bx \n"
" movw $1, %cx \n"
" movw $0, %dx \n"
" movw $0, %di \n"
" int $0x10 \n"
" movb $0x55, %al \n"
" outb %al, $0x80 \n"
/* if we got here, just about done.
* Need to get back to protected mode */
" movl %cr0, %eax \n"
" orl $0x0000001, %eax\n" /* PE = 1 */
" movl %eax, %cr0 \n"
/* Now that we are in protected mode jump to a 32 bit code segment. */
" data32 ljmp $0x10, $vga_ec_restart\n"
"vga_ec_restart:\n"
" .code32\n"
" movw $0x18, %ax \n"
" mov %ax, %ds \n"
" mov %ax, %es \n"
" mov %ax, %fs \n"
" mov %ax, %gs \n"
" mov %ax, %ss \n"
/* restore proper gdt and idt */
" lgdt %cs:gdtarg \n"
" lidt idtarg \n"
" .globl vga__ec_exit \n"
"vga_ec_exit:\n"
" mov __stack, %esp \n"
" popal\n"
);
}
/* ============================================================================================
* real-mode interrupt handlers.
* These are handled because VGA ROMs tend to call bios ints in real mode
* */
// we had hoped to avoid this.
// this is a stub IDT only. It's main purpose is to ignore calls
// to the BIOS.
// no longer. Dammit. We have to respond to these.
struct realidt {
unsigned short offset, cs;
};
// from a handy writeup that andrey found.
// handler.
// There are some assumptions we can make here.
// First, the Top Of Stack (TOS) is located on the top of page zero.
// we can share this stack between real and protected mode.
// that simplifies a lot of things ...
// we'll just push all the registers on the stack as longwords,
// and pop to protected mode.
// second, since this only ever runs as part of linuxbios,
// we know all the segment register values -- so we don't save any.
// keep the handler that calls things small. It can do a call to
// more complex code in linuxbios itself. This helps a lot as we don't
// have to do address fixup in this little stub, and calls are absolute
// so the handler is relocatable.
void handler_vga(void)
{
__asm__ __volatile__ (
" .code16 \n"
"idthandle: \n"
" pushal \n"
" movb $0, %al \n"
" ljmp $0, $callbiosint16\n"
"end_idthandle: \n"
" .code32 \n"
);
}
void debughandler_vga(void)
{
__asm__ __volatile__ (
" .code16 \n"
"debughandle: \n"
" pushw %cx \n"
" movw $250, %cx \n"
"dbh1: \n"
" loop dbh1 \n"
" popw %cx \n"
" iret \n"
"end_debughandle: \n"
".code32 \n"
);
}
// Calling conventions. The first C function is called with this stuff
// on the stack. They look like value parameters, but note that if you
// modify them they will go back to the INTx function modified.
// the C function will call the biosint function with these as
// REFERENCE parameters. In this way, we can easily get
// returns back to the INTx caller (i.e. vgabios)
void callbiosint_vga(void)
{
__asm__ __volatile__ (
" .code16 \n"
"callbiosint16: \n"
" push %ds \n"
" push %es \n"
" push %fs \n"
" push %gs \n"
// clean up the int #. To save space we put it in the lower
// byte. But the top 24 bits are junk.
" andl $0xff, %eax\n"
// this push does two things:
// - put the INT # on the stack as a parameter
// - provides us with a temp for the %cr0 mods.
" pushl %eax \n"
" movl %cr0, %eax\n"
" orl $0x00000001, %eax\n" /* PE = 1 */
" movl %eax, %cr0\n"
/* Now that we are in protected mode jump to a 32 bit code segment. */
" data32 ljmp $0x10, $biosprotect\n"
"biosprotect: \n"
" .code32 \n"
" movw $0x18, %ax \n"
" mov %ax, %ds \n"
" mov %ax, %es \n"
" mov %ax, %fs \n"
" mov %ax, %gs \n"
" mov %ax, %ss \n"
" lidt idtarg \n"
" call biosint_vga \n"
// back to real mode ...
" ljmp $0x28, $__rms_16bit2\n"
"__rms_16bit2: \n"
" .code16 \n"
/* 16 bit code from here on... */
/* Load the segment registers w/ properly configured segment
* descriptors. They will retain these configurations (limits,
* writability, etc.) once protected mode is turned off. */
" mov $0x30, %ax \n"
" mov %ax, %ds \n"
" mov %ax, %es \n"
" mov %ax, %fs \n"
" mov %ax, %gs \n"
" mov %ax, %ss \n"
/* Turn off protection (bit 0 in CR0) */
" movl %cr0, %eax \n"
" andl $0xFFFFFFFE, %eax \n"
" movl %eax, %cr0 \n"
/* Now really going into real mode */
" ljmp $0, $__rms_real2 \n"
"__rms_real2: \n"
/* Setup a stack
* FixME: where is esp? */
" mov $0x0, %ax \n"
" mov %ax, %ss \n"
/* ebugging for RGM */
" mov $0x11, %al \n"
" outb %al, $0x80 \n"
/* Load our 16 it idt */
" xor %ax, %ax \n"
" mov %ax, %ds \n"
" lidt __myidt \n"
/* Dump zeros in the other segregs */
" mov %ax, %es \n"
" mov %ax, %fs \n"
" mov %ax, %gs \n"
" mov $0x40, %ax \n"
" mov %ax, %ds \n"
/* pop the INT # that you pushed earlier */
" popl %eax \n"
" pop %gs \n"
" pop %fs \n"
" pop %es \n"
" pop %ds \n"
" popal \n"
" iret \n"
" .code32 \n"
);
}
enum {
PCIBIOS = 0x1a,
MEMSIZE = 0x12
};
int pcibios_vga(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
unsigned long *pesp, unsigned long *pebx, unsigned long *pedx,
unsigned long *pecx, unsigned long *peax, unsigned long *pflags);
int handleint21_vga(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
unsigned long *pesp, unsigned long *pebx, unsigned long *pedx,
unsigned long *pecx, unsigned long *peax, unsigned long *pflags
);
extern void vga_exit(void);
int biosint_vga(unsigned long intnumber,
unsigned long gsfs, unsigned long dses,
unsigned long edi, unsigned long esi,
unsigned long ebp, unsigned long esp,
unsigned long ebx, unsigned long edx,
unsigned long ecx, unsigned long eax,
unsigned long cs_ip, unsigned short stackflags)
{
unsigned long ip;
unsigned long cs;
unsigned long flags;
int ret = -1;
ip = cs_ip & 0xffff;
cs = cs_ip >> 16;
flags = stackflags;
printk_debug("biosint: INT# 0x%lx\n", intnumber);
printk_debug("biosint: eax 0x%lx ebx 0x%lx ecx 0x%lx edx 0x%lx\n",
eax, ebx, ecx, edx);
printk_debug("biosint: ebp 0x%lx esp 0x%lx edi 0x%lx esi 0x%lx\n",
ebp, esp, edi, esi);
printk_debug("biosint: ip 0x%x cs 0x%x flags 0x%x\n",
ip, cs, flags);
// cases in a good compiler are just as good as your own tables.
switch (intnumber) {
case 0 ... 15:
// These are not BIOS service, but the CPU-generated exceptions
printk_info("biosint: Oops, exception %u\n", intnumber);
if (esp < 0x1000) {
printk_debug("Stack contents: ");
while (esp < 0x1000) {
printk_debug("0x%04x ", *(unsigned short *) esp);
esp += 2;
}
printk_debug("\n");
}
printk_debug("biosint: Bailing out\n");
// "longjmp"
vga_exit();
break;
case PCIBIOS:
ret = pcibios_vga( &edi, &esi, &ebp, &esp,
&ebx, &edx, &ecx, &eax, &flags);
break;
case MEMSIZE:
// who cares.
eax = 64 * 1024;
ret = 0;
break;
case 0x15:
ret=handleint21_vga( &edi, &esi, &ebp, &esp,
&ebx, &edx, &ecx, &eax, &flags);
break;
default:
printk_info("BIOSINT: Unsupport int #0x%x\n",
intnumber);
break;
}
if (ret)
flags |= 1; // carry flags
else
flags &= ~1;
stackflags = flags;
return ret;
}
enum {
CHECK = 0xb001,
FINDDEV = 0xb102,
READCONFBYTE = 0xb108,
READCONFWORD = 0xb109,
READCONFDWORD = 0xb10a,
WRITECONFBYTE = 0xb10b,
WRITECONFWORD = 0xb10c,
WRITECONFDWORD = 0xb10d
};
// errors go in AH. Just set these up so that word assigns
// will work. KISS.
enum {
PCIBIOS_NODEV = 0x8600,
PCIBIOS_BADREG = 0x8700
};
int
pcibios_vga(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
unsigned long *pesp, unsigned long *pebx, unsigned long *pedx,
unsigned long *pecx, unsigned long *peax, unsigned long *pflags)
{
unsigned long edi = *pedi;
unsigned long esi = *pesi;
unsigned long ebp = *pebp;
unsigned long esp = *pesp;
unsigned long ebx = *pebx;
unsigned long edx = *pedx;
unsigned long ecx = *pecx;
unsigned long eax = *peax;
unsigned long flags = *pflags;
unsigned short func = (unsigned short) eax;
int retval = 0;
unsigned short devid, vendorid, devfn;
short devindex; /* Use short to get rid of gabage in upper half of 32-bit register */
unsigned char bus;
device_t dev;
switch(func) {
case CHECK:
*pedx = 0x4350;
*pecx = 0x2049;
retval = 0;
break;
case FINDDEV:
{
devid = *pecx;
vendorid = *pedx;
devindex = *pesi;
dev = 0;
while ((dev = dev_find_device(vendorid, devid, dev))) {
if (devindex <= 0)
break;
devindex--;
}
if (dev) {
unsigned short busdevfn;
*peax = 0;
// busnum is an unsigned char;
// devfn is an int, so we mask it off.
busdevfn = (dev->bus->secondary << 8)
| (dev->path.u.pci.devfn & 0xff);
printk_debug("0x%x: return 0x%x\n", func, busdevfn);
*pebx = busdevfn;
retval = 0;
} else {
*peax = PCIBIOS_NODEV;
retval = -1;
}
}
break;
case READCONFDWORD:
case READCONFWORD:
case READCONFBYTE:
case WRITECONFDWORD:
case WRITECONFWORD:
case WRITECONFBYTE:
{
unsigned long dword;
unsigned short word;
unsigned char byte;
unsigned char reg;
devfn = *pebx & 0xff;
bus = *pebx >> 8;
reg = *pedi;
dev = dev_find_slot(bus, devfn);
if (! dev) {
printk_debug("0x%x: BAD DEVICE bus %d devfn 0x%x\n", func, bus, devfn);
// idiots. the pcibios guys assumed you'd never pass a bad bus/devfn!
*peax = PCIBIOS_BADREG;
retval = -1;
}
switch(func) {
case READCONFBYTE:
byte = pci_read_config8(dev, reg);
*pecx = byte;
break;
case READCONFWORD:
word = pci_read_config16(dev, reg);
*pecx = word;
break;
case READCONFDWORD:
dword = pci_read_config32(dev, reg);
*pecx = dword;
break;
case WRITECONFBYTE:
byte = *pecx;
pci_write_config8(dev, reg, byte);
break;
case WRITECONFWORD:
word = *pecx;
pci_write_config16(dev, reg, word);
break;
case WRITECONFDWORD:
dword = *pecx;
pci_write_config32(dev, reg, dword);
break;
}
if (retval)
retval = PCIBIOS_BADREG;
printk_debug("0x%x: bus %d devfn 0x%x reg 0x%x val 0x%lx\n",
func, bus, devfn, reg, *pecx);
*peax = 0;
retval = 0;
}
break;
default:
printk_err("UNSUPPORTED PCIBIOS FUNCTION 0x%x\n", func);
break;
}
return retval;
}
int handleint21_vga(unsigned long *edi, unsigned long *esi, unsigned long *ebp,
unsigned long *esp, unsigned long *ebx, unsigned long *edx,
unsigned long *ecx, unsigned long *eax, unsigned long *flags)
{
int res=-1;
switch(*eax&0xffff)
{
case 0x5f19:
break;
case 0x5f18:
*eax=0x5f;
*ebx=0x545; // MCLK = 133, 32M frame buffer, 256 M main memory
*ecx=0x060;
res=0;
break;
case 0x5f00:
*eax = 0x8600;
break;
case 0x5f01:
*eax = 0x5f;
*ecx = (*ecx & 0xffffff00 ) | 2; // panel type = 2 = 1024 * 768
res = 0;
break;
case 0x5f02:
*eax=0x5f;
*ebx= (*ebx & 0xffff0000) | 2;
*ecx= (*ecx & 0xffff0000) | 0x401; // PAL + crt only
*edx= (*edx & 0xffff0000) | 0; // TV Layout - default
res=0;
break;
case 0x5f0f:
*eax=0x860f;
break;
}
return res;
}
/* ============================================================================================
* This function sets up bios and pci interrupt handlers for real mode
* This is needed when running VGA BIOS in real mode
* */
void setup_realmode_idt_vga(void)
{
extern unsigned char idthandle, end_idthandle;
extern unsigned char debughandle, end_debughandle;
int i;
struct realidt *idts = (struct realidt *) 0;
int codesize = &end_idthandle - &idthandle;
unsigned char *intbyte, *codeptr;
// for each int, we create a customized little handler
// that just pushes %ax, puts the int # in %al,
// then calls the common interrupt handler.
// this necessitated because intel didn't know much about
// architecture when they did the 8086 (it shows)
// (hmm do they know anymore even now :-)
// obviously you can see I don't really care about memory
// efficiency. If I did I would probe back through the stack
// and get it that way. But that's really disgusting.
for (i = 0; i < 256; i++) {
idts[i].cs = 0;
codeptr = (char*) 4096 + i * codesize;
idts[i].offset = (unsigned) codeptr;
memcpy(codeptr, &idthandle, codesize);
intbyte = codeptr + 3;
*intbyte = i;
}
// fixed entry points
// VGA BIOSes tend to hardcode f000:f065 as the previous handler of
// int10.
// calling convention here is the same as INTs, we can reuse
// the int entry code.
codeptr = (char*) 0xff065;
memcpy(codeptr, &idthandle, codesize);
intbyte = codeptr + 3;
*intbyte = 0x42; /* int42 is the relocated int10 */
/* debug handler - useful to set a programmable delay between instructions if the
TF bit is set upon call to real mode */
idts[1].cs = 0;
idts[1].offset = 16384;
memcpy(16384, &debughandle, &end_debughandle - &debughandle);
}
/* ============================================================================================
* initializes vga bios during device initialization
* */
static void vga_init(device_t dev)
{
struct drivers_pci_realmode_config *cfg = (struct drivers_pci_realmode_config *)dev->chip_info;
// code to make vga init go through the emulator - as of yet this does not workfor the epia-m
dev->on_mainboard=1;
dev->rom_address = (void *)cfg->rom_address;
pci_dev_init(dev);
// code to make vga init run in real mode - does work but against the current Linuxbios philosophy
printk_debug("INSTALL REAL-MODE IDT\n");
setup_realmode_idt();
printk_debug("DO THE VGA BIOS\n");
do_vgabios(dev);
vga_enable_console();
pci_write_config32(dev,0x30,0);
}
// device operations : on vga device init, call vga_init
static struct device_operations drivers_pci_realmode_dev_ops = {
.init = vga_init,
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.scan_bus = 0,
};
/* ============================================================================================
* FIRST LOOP : traversing static.c list and enabling all chips found in there
* set given device operations descriptor to call vga_initialize
* */
void vga_configure_pci(device_t dev){
printk_debug("Setting VGA callback\n");
dev->ops = &drivers_pci_realmode_dev_ops;
}
// PCI VGA device operations
struct chip_operations drivers_pci_realmode_ops = {
.enable_dev = vga_configure_pci,
};

2
src/mainboard/artecgroup/dbe61/rtl8139/Config.lb Normal file
View File

@ -0,0 +1,2 @@
config chip.h
driver rtl8139.o

11
src/mainboard/artecgroup/dbe61/rtl8139/chip.h Normal file
View File

@ -0,0 +1,11 @@
#ifndef PCI_RTL8139_H
#define PCI_RTL8139_H
struct drivers_pci_rtl8139_config
{
uint8_t nic_irq; // RTL8139 NIC
};
//struct chip_operations;
extern struct chip_operations drivers_pci_rtl8139_ops;
#endif

65
src/mainboard/artecgroup/dbe61/rtl8139/rtl8139.c Normal file
View File

@ -0,0 +1,65 @@
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#undef __KERNEL__
#include <arch/io.h>
#include <string.h>
#include "chip.h"
void pci_level_irq(unsigned char intNum);
// initialize Realtek NIC
static void nic_initialize(device_t dev)
{
struct drivers_pci_rtl8139_config *cfg = (struct drivers_pci_rtl8139_config*)dev->chip_info;
uint16_t pciCmd = 0;
printk_debug("RTL8139 initialize\n");
dev->on_mainboard=1;
pci_dev_init(dev);
// Set PCI IRQ descriptors.
// This configures nothing (no magic done in VSA, too), only descriptors are set,
// that are later read by operating system to find out which irq is used by dev.
// The real GPIO to IRQ mapping configuration takes place in cs5536.c
// and is configurable in Config.lb.
printk_debug("Setting NIC IRQ to %d\n", cfg->nic_irq);
pci_write_config8(dev, PCI_INTERRUPT_LINE, cfg->nic_irq);
pci_level_irq(cfg->nic_irq);
// RTL8139 must have bus mastering for some data transfers
pciCmd = pci_read_config16(dev, PCI_COMMAND);
pciCmd |= (PCI_COMMAND_MASTER | PCI_COMMAND_IO);
pci_write_config16(dev, PCI_COMMAND, pciCmd);
}
// device operations : on PCI device init, call nic_initialize
static struct device_operations drivers_pci_rtl8139_dev_ops =
{
.init = nic_initialize,
.read_resources = pci_dev_read_resources,
.set_resources = pci_dev_set_resources,
.enable_resources = pci_dev_enable_resources,
.scan_bus = 0,
};
/* FIRST LOOP : traversing static.c list and enabling all chips found in there
* set given device operations descriptor to call nic_initialize
* */
void nic_configure_pci(device_t dev)
{
dev->ops = &drivers_pci_rtl8139_dev_ops;
}
// PCI NIC operations
struct chip_operations drivers_pci_rtl8139_ops = {
.enable_dev = nic_configure_pci,
};