- pci_device.c fixes for generic pci bridges to zero the unused portion of bridge resources
- coherent_ht.c remove dead idle loop. - raminit.c Enable a 64MB mmio window just below 4GB git-svn-id: svn://svn.coreboot.org/coreboot/trunk@967 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
parent
9b45b04d23
commit
5fb929e6e3
|
@ -303,6 +303,8 @@ static void pci_set_resource(struct device *dev, struct resource *resource)
|
|||
IORESOURCE_IO, IORESOURCE_IO);
|
||||
pci_write_config8(dev, PCI_IO_BASE, base >> 8);
|
||||
pci_write_config8(dev, PCI_IO_LIMIT, limit >> 8);
|
||||
pci_write_config16(dev, PCI_IO_BASE_UPPER16, 0);
|
||||
pci_write_config16(dev, PCI_IO_LIMIT_UPPER16, 0);
|
||||
}
|
||||
else if (resource->index == PCI_MEMORY_BASE) {
|
||||
/* set the memory range
|
||||
|
@ -322,6 +324,8 @@ static void pci_set_resource(struct device *dev, struct resource *resource)
|
|||
IORESOURCE_MEM | IORESOURCE_PREFETCH);
|
||||
pci_write_config16(dev, PCI_PREF_MEMORY_BASE, base >> 16);
|
||||
pci_write_config16(dev, PCI_PREF_MEMORY_LIMIT, limit >> 16);
|
||||
pci_write_config32(dev, PCI_PREF_BASE_UPPER32, 0);
|
||||
pci_write_config32(dev, PCI_PREF_LIMIT_UPPER32, 0);
|
||||
}
|
||||
else {
|
||||
printk_err("ERROR: invalid resource->index %x\n",
|
||||
|
|
|
@ -402,7 +402,7 @@ static void disable_probes(void)
|
|||
print_debug("Disabling read/write/fill probes for UP... ");
|
||||
|
||||
val=pci_read_config32(NODE_HT(0), 0x68);
|
||||
val |= 0x0000040f;
|
||||
val |= (1<<10)|(1<<9)|(1<<8)|(1<<4)|(1<<3)|(1<<2)|(1<<1)|(1 << 0);
|
||||
pci_write_config32(NODE_HT(0), 0x68, val);
|
||||
|
||||
print_debug("done.\r\n");
|
||||
|
@ -475,7 +475,6 @@ static bool check_connection(u8 src, u8 dest, u8 link)
|
|||
{
|
||||
/* this function does 2 things:
|
||||
* 1) detect whether the coherent HT link is connected.
|
||||
* After this step follows a small idle loop.
|
||||
* 2) verify that the coherent hypertransport link
|
||||
* is established and actually working by reading the
|
||||
* remote node's vendor/device id
|
||||
|
@ -492,9 +491,6 @@ static bool check_connection(u8 src, u8 dest, u8 link)
|
|||
if ( (val&0x17) != 0x03)
|
||||
return 0;
|
||||
|
||||
/* idle loop to make sure the link is established */
|
||||
for (val=0;val<16;val++);
|
||||
|
||||
/* 2) */
|
||||
val=pci_read_config32(NODE_HT(dest),0);
|
||||
if(val != 0x11001022)
|
||||
|
|
|
@ -315,7 +315,7 @@ static void setup_default_resource_map(void)
|
|||
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff00,
|
||||
|
||||
/* Memory-Mapped I/O Base i Registers
|
||||
* F1:0x80 i = 0
|
||||
|
@ -350,7 +350,7 @@ static void setup_default_resource_map(void)
|
|||
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
|
||||
|
||||
/* PCI I/O Limit i Registers
|
||||
* F1:0xC4 i = 0
|
||||
|
|
Loading…
Reference in New Issue