siemens/mc_apl1: Move board specific things to mc_apl1 variant

The following things are specific characteristic of mc_apl1 board
variant:

- initialization for the eDP to LVDS converter
- enable decoding address range for COM 3
- legacy IRQ routing for PCI devices
- wait function for old legacy devices
- set coreboot ready LED

Change-Id: I5c853e6caae6cc880ead436f232cabddeee6d09a
Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-on: https://review.coreboot.org/25822
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/mainboard/siemens/mc_apl1/Makefile.inc

@@ -6,7 +6,6 @@ bootblock-y += bootblock.c
 romstage-y += romstage.c
 
 ramstage-y += mainboard.c
-ramstage-y += ptn3460.c
 
 subdirs-y += variants/baseboard
 CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/baseboard/include

src/mainboard/siemens/mc_apl1/mainboard.c

@@ -14,26 +14,19 @@
  * GNU General Public License for more details.
  */
 
+#include <compiler.h>
 #include <console/console.h>
-#include <delay.h>
 #include <device/device.h>
 #include <device/pci.h>
 #include <device/pci_ids.h>
-#include <gpio.h>
 #include <hwilib.h>
 #include <i210.h>
 #include <intelblocks/cpulib.h>
-#include <intelblocks/lpc_lib.h>
-#include <intelblocks/pcr.h>
 #include <intelblocks/systemagent.h>
 #include <soc/pci_devs.h>
-#include <soc/pcr_ids.h>
 #include <string.h>
-#include <bootstate.h>
 #include <timer.h>
-#include <timestamp.h>
 #include <baseboard/variants.h>
-#include "ptn3460.h"
 
 #define MAX_PATH_DEPTH		12
 #define MAX_NUM_MAPPINGS	10
@@ -202,22 +195,11 @@ static void mainboard_init(void *chip_info)
 
 static void mainboard_final(void *chip_info)
 {
-	int status;
 	uint16_t cmd = 0;
 	device_t dev = NULL;
 
-	/*
-	 * Set up the DP2LVDS converter.
-	 * ptn3460_init() may only be executed after i2c bus init.
-	 */
-	status = ptn3460_init("hwinfo.hex");
-	if (status)
-		printk(BIOS_ERR, "LCD: Set up PTN with status 0x%x\n", status);
-	else
-		printk(BIOS_INFO, "LCD: Set up PTN was successful.\n");
-
-	/* Enable additional I/O decoding range on LPC for COM 3 */
-	lpc_open_pmio_window(0x3e8, 8);
+	/* Do board specific things */
+	variant_mainboard_final();
 
 	/* Set Master Enable for on-board PCI device. */
 	dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403f, 0);
@@ -226,48 +208,13 @@ static void mainboard_final(void *chip_info)
 		cmd |= PCI_COMMAND_MASTER;
 		pci_write_config16(dev, PCI_COMMAND, cmd);
 	}
-
-	/*
-	 * PIR6 register mapping for PCIe root ports
-	 * INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#-> PIRQA#
-	 */
-	pcr_write16(PID_ITSS, 0x314c, 0x0321);
 }
 
-static void wait_for_legacy_dev(void *unused)
+/* The following function performs board specific things. */
+void __weak variant_mainboard_final(void)
 {
-	uint32_t legacy_delay, us_since_boot;
-	struct stopwatch sw;
-
-	/* Open main hwinfo block. */
-	if (hwilib_find_blocks("hwinfo.hex") != CB_SUCCESS)
-		return;
-
-	/* Get legacy delay parameter from hwinfo. */
-	if (hwilib_get_field(LegacyDelay, (uint8_t *) &legacy_delay,
-			      sizeof(legacy_delay)) != sizeof(legacy_delay))
-		return;
-
-	us_since_boot = get_us_since_boot();
-	/* No need to wait if the time since boot is already long enough.*/
-	if (us_since_boot > legacy_delay)
-		return;
-	stopwatch_init_msecs_expire(&sw, (legacy_delay - us_since_boot) / 1000);
-	printk(BIOS_NOTICE, "Wait remaining %d of %d us for legacy devices...",
-			legacy_delay - us_since_boot, legacy_delay);
-	stopwatch_wait_until_expired(&sw);
-	printk(BIOS_NOTICE, "done!\n");
 }
 
-static void finalize_boot(void *unused)
-{
-	/* Set coreboot ready LED. */
-	gpio_output(CNV_RGI_DT, 1);
-}
-
-BOOT_STATE_INIT_ENTRY(BS_DEV_ENUMERATE, BS_ON_ENTRY, wait_for_legacy_dev, NULL);
-BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_BOOT, BS_ON_ENTRY, finalize_boot, NULL);
-
 struct chip_operations mainboard_ops = {
 	.init = mainboard_init,
 	.final = mainboard_final,

src/mainboard/siemens/mc_apl1/variants/baseboard/include/baseboard/variants.h

@@ -26,4 +26,7 @@
 const struct pad_config *variant_gpio_table(size_t *num);
 const struct pad_config *variant_early_gpio_table(size_t *num);
 
+/* The following function performs board specific things. */
+void variant_mainboard_final(void);
+
 #endif /* _BASEBOARD_VARIANTS_H_ */

src/mainboard/siemens/mc_apl1/variants/mc_apl1/Makefile.inc

@@ -0,0 +1,2 @@
+ramstage-y += mainboard.c
+ramstage-y += ptn3460.c

src/mainboard/siemens/mc_apl1/variants/mc_apl1/mainboard.c

@@ -0,0 +1,84 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Siemens AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <bootstate.h>
+#include <console/console.h>
+#include <gpio.h>
+#include <hwilib.h>
+#include <intelblocks/lpc_lib.h>
+#include <intelblocks/pcr.h>
+#include <soc/pcr_ids.h>
+#include <timer.h>
+#include <timestamp.h>
+#include <baseboard/variants.h>
+#include <variant/ptn3460.h>
+
+void variant_mainboard_final(void)
+{
+	int status;
+
+	/*
+	 * Set up the DP2LVDS converter.
+	 * ptn3460_init() may only be executed after i2c bus init.
+	 */
+	status = ptn3460_init("hwinfo.hex");
+	if (status)
+		printk(BIOS_ERR, "LCD: Set up PTN with status 0x%x\n", status);
+	else
+		printk(BIOS_INFO, "LCD: Set up PTN was successful.\n");
+
+	/* Enable additional I/O decoding range on LPC for COM 3 */
+	lpc_open_pmio_window(0x3e8, 8);
+
+	/*
+	 * PIR6 register mapping for PCIe root ports
+	 * INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#-> PIRQA#
+	 */
+	pcr_write16(PID_ITSS, 0x314c, 0x0321);
+}
+
+static void wait_for_legacy_dev(void *unused)
+{
+	uint32_t legacy_delay, us_since_boot;
+	struct stopwatch sw;
+
+	/* Open main hwinfo block. */
+	if (hwilib_find_blocks("hwinfo.hex") != CB_SUCCESS)
+		return;
+
+	/* Get legacy delay parameter from hwinfo. */
+	if (hwilib_get_field(LegacyDelay, (uint8_t *) &legacy_delay,
+			      sizeof(legacy_delay)) != sizeof(legacy_delay))
+		return;
+
+	us_since_boot = get_us_since_boot();
+	/* No need to wait if the time since boot is already long enough.*/
+	if (us_since_boot > legacy_delay)
+		return;
+	stopwatch_init_msecs_expire(&sw, (legacy_delay - us_since_boot) / 1000);
+	printk(BIOS_NOTICE, "Wait remaining %d of %d us for legacy devices...",
+			legacy_delay - us_since_boot, legacy_delay);
+	stopwatch_wait_until_expired(&sw);
+	printk(BIOS_NOTICE, "done!\n");
+}
+
+static void finalize_boot(void *unused)
+{
+	/* Set coreboot ready LED. */
+	gpio_output(CNV_RGI_DT, 1);
+}
+
+BOOT_STATE_INIT_ENTRY(BS_DEV_ENUMERATE, BS_ON_ENTRY, wait_for_legacy_dev, NULL);
+BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_BOOT, BS_ON_ENTRY, finalize_boot, NULL);

src/mainboard/siemens/mc_apl1/variants/mc_apl1/ptn3460.c

@@ -17,7 +17,7 @@
 #include <lib.h>
 #include <hwilib.h>
 #include <device/i2c_simple.h>
-#include "ptn3460.h"
+#include <variant/ptn3460.h>
 
 /**
  * This function sets up the DP2LVDS-converter to be used with the appropriate