siemens/mc_apl1: Move board specific things to mc_apl1 variant
The following things are specific characteristic of mc_apl1 board variant: - initialization for the eDP to LVDS converter - enable decoding address range for COM 3 - legacy IRQ routing for PCI devices - wait function for old legacy devices - set coreboot ready LED Change-Id: I5c853e6caae6cc880ead436f232cabddeee6d09a Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/25822 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
parent
5c49d18537
commit
614135359d
|
@ -6,7 +6,6 @@ bootblock-y += bootblock.c
|
||||||
romstage-y += romstage.c
|
romstage-y += romstage.c
|
||||||
|
|
||||||
ramstage-y += mainboard.c
|
ramstage-y += mainboard.c
|
||||||
ramstage-y += ptn3460.c
|
|
||||||
|
|
||||||
subdirs-y += variants/baseboard
|
subdirs-y += variants/baseboard
|
||||||
CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/baseboard/include
|
CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/baseboard/include
|
||||||
|
|
|
@ -14,26 +14,19 @@
|
||||||
* GNU General Public License for more details.
|
* GNU General Public License for more details.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
|
#include <compiler.h>
|
||||||
#include <console/console.h>
|
#include <console/console.h>
|
||||||
#include <delay.h>
|
|
||||||
#include <device/device.h>
|
#include <device/device.h>
|
||||||
#include <device/pci.h>
|
#include <device/pci.h>
|
||||||
#include <device/pci_ids.h>
|
#include <device/pci_ids.h>
|
||||||
#include <gpio.h>
|
|
||||||
#include <hwilib.h>
|
#include <hwilib.h>
|
||||||
#include <i210.h>
|
#include <i210.h>
|
||||||
#include <intelblocks/cpulib.h>
|
#include <intelblocks/cpulib.h>
|
||||||
#include <intelblocks/lpc_lib.h>
|
|
||||||
#include <intelblocks/pcr.h>
|
|
||||||
#include <intelblocks/systemagent.h>
|
#include <intelblocks/systemagent.h>
|
||||||
#include <soc/pci_devs.h>
|
#include <soc/pci_devs.h>
|
||||||
#include <soc/pcr_ids.h>
|
|
||||||
#include <string.h>
|
#include <string.h>
|
||||||
#include <bootstate.h>
|
|
||||||
#include <timer.h>
|
#include <timer.h>
|
||||||
#include <timestamp.h>
|
|
||||||
#include <baseboard/variants.h>
|
#include <baseboard/variants.h>
|
||||||
#include "ptn3460.h"
|
|
||||||
|
|
||||||
#define MAX_PATH_DEPTH 12
|
#define MAX_PATH_DEPTH 12
|
||||||
#define MAX_NUM_MAPPINGS 10
|
#define MAX_NUM_MAPPINGS 10
|
||||||
|
@ -202,22 +195,11 @@ static void mainboard_init(void *chip_info)
|
||||||
|
|
||||||
static void mainboard_final(void *chip_info)
|
static void mainboard_final(void *chip_info)
|
||||||
{
|
{
|
||||||
int status;
|
|
||||||
uint16_t cmd = 0;
|
uint16_t cmd = 0;
|
||||||
device_t dev = NULL;
|
device_t dev = NULL;
|
||||||
|
|
||||||
/*
|
/* Do board specific things */
|
||||||
* Set up the DP2LVDS converter.
|
variant_mainboard_final();
|
||||||
* ptn3460_init() may only be executed after i2c bus init.
|
|
||||||
*/
|
|
||||||
status = ptn3460_init("hwinfo.hex");
|
|
||||||
if (status)
|
|
||||||
printk(BIOS_ERR, "LCD: Set up PTN with status 0x%x\n", status);
|
|
||||||
else
|
|
||||||
printk(BIOS_INFO, "LCD: Set up PTN was successful.\n");
|
|
||||||
|
|
||||||
/* Enable additional I/O decoding range on LPC for COM 3 */
|
|
||||||
lpc_open_pmio_window(0x3e8, 8);
|
|
||||||
|
|
||||||
/* Set Master Enable for on-board PCI device. */
|
/* Set Master Enable for on-board PCI device. */
|
||||||
dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403f, 0);
|
dev = dev_find_device(PCI_VENDOR_ID_SIEMENS, 0x403f, 0);
|
||||||
|
@ -226,48 +208,13 @@ static void mainboard_final(void *chip_info)
|
||||||
cmd |= PCI_COMMAND_MASTER;
|
cmd |= PCI_COMMAND_MASTER;
|
||||||
pci_write_config16(dev, PCI_COMMAND, cmd);
|
pci_write_config16(dev, PCI_COMMAND, cmd);
|
||||||
}
|
}
|
||||||
|
|
||||||
/*
|
|
||||||
* PIR6 register mapping for PCIe root ports
|
|
||||||
* INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#-> PIRQA#
|
|
||||||
*/
|
|
||||||
pcr_write16(PID_ITSS, 0x314c, 0x0321);
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void wait_for_legacy_dev(void *unused)
|
/* The following function performs board specific things. */
|
||||||
|
void __weak variant_mainboard_final(void)
|
||||||
{
|
{
|
||||||
uint32_t legacy_delay, us_since_boot;
|
|
||||||
struct stopwatch sw;
|
|
||||||
|
|
||||||
/* Open main hwinfo block. */
|
|
||||||
if (hwilib_find_blocks("hwinfo.hex") != CB_SUCCESS)
|
|
||||||
return;
|
|
||||||
|
|
||||||
/* Get legacy delay parameter from hwinfo. */
|
|
||||||
if (hwilib_get_field(LegacyDelay, (uint8_t *) &legacy_delay,
|
|
||||||
sizeof(legacy_delay)) != sizeof(legacy_delay))
|
|
||||||
return;
|
|
||||||
|
|
||||||
us_since_boot = get_us_since_boot();
|
|
||||||
/* No need to wait if the time since boot is already long enough.*/
|
|
||||||
if (us_since_boot > legacy_delay)
|
|
||||||
return;
|
|
||||||
stopwatch_init_msecs_expire(&sw, (legacy_delay - us_since_boot) / 1000);
|
|
||||||
printk(BIOS_NOTICE, "Wait remaining %d of %d us for legacy devices...",
|
|
||||||
legacy_delay - us_since_boot, legacy_delay);
|
|
||||||
stopwatch_wait_until_expired(&sw);
|
|
||||||
printk(BIOS_NOTICE, "done!\n");
|
|
||||||
}
|
}
|
||||||
|
|
||||||
static void finalize_boot(void *unused)
|
|
||||||
{
|
|
||||||
/* Set coreboot ready LED. */
|
|
||||||
gpio_output(CNV_RGI_DT, 1);
|
|
||||||
}
|
|
||||||
|
|
||||||
BOOT_STATE_INIT_ENTRY(BS_DEV_ENUMERATE, BS_ON_ENTRY, wait_for_legacy_dev, NULL);
|
|
||||||
BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_BOOT, BS_ON_ENTRY, finalize_boot, NULL);
|
|
||||||
|
|
||||||
struct chip_operations mainboard_ops = {
|
struct chip_operations mainboard_ops = {
|
||||||
.init = mainboard_init,
|
.init = mainboard_init,
|
||||||
.final = mainboard_final,
|
.final = mainboard_final,
|
||||||
|
|
|
@ -26,4 +26,7 @@
|
||||||
const struct pad_config *variant_gpio_table(size_t *num);
|
const struct pad_config *variant_gpio_table(size_t *num);
|
||||||
const struct pad_config *variant_early_gpio_table(size_t *num);
|
const struct pad_config *variant_early_gpio_table(size_t *num);
|
||||||
|
|
||||||
|
/* The following function performs board specific things. */
|
||||||
|
void variant_mainboard_final(void);
|
||||||
|
|
||||||
#endif /* _BASEBOARD_VARIANTS_H_ */
|
#endif /* _BASEBOARD_VARIANTS_H_ */
|
||||||
|
|
|
@ -0,0 +1,2 @@
|
||||||
|
ramstage-y += mainboard.c
|
||||||
|
ramstage-y += ptn3460.c
|
|
@ -0,0 +1,84 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 Siemens AG
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <bootstate.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <gpio.h>
|
||||||
|
#include <hwilib.h>
|
||||||
|
#include <intelblocks/lpc_lib.h>
|
||||||
|
#include <intelblocks/pcr.h>
|
||||||
|
#include <soc/pcr_ids.h>
|
||||||
|
#include <timer.h>
|
||||||
|
#include <timestamp.h>
|
||||||
|
#include <baseboard/variants.h>
|
||||||
|
#include <variant/ptn3460.h>
|
||||||
|
|
||||||
|
void variant_mainboard_final(void)
|
||||||
|
{
|
||||||
|
int status;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Set up the DP2LVDS converter.
|
||||||
|
* ptn3460_init() may only be executed after i2c bus init.
|
||||||
|
*/
|
||||||
|
status = ptn3460_init("hwinfo.hex");
|
||||||
|
if (status)
|
||||||
|
printk(BIOS_ERR, "LCD: Set up PTN with status 0x%x\n", status);
|
||||||
|
else
|
||||||
|
printk(BIOS_INFO, "LCD: Set up PTN was successful.\n");
|
||||||
|
|
||||||
|
/* Enable additional I/O decoding range on LPC for COM 3 */
|
||||||
|
lpc_open_pmio_window(0x3e8, 8);
|
||||||
|
|
||||||
|
/*
|
||||||
|
* PIR6 register mapping for PCIe root ports
|
||||||
|
* INTA#->PIRQB#, INTB#->PIRQC#, INTC#->PIRQD#, INTD#-> PIRQA#
|
||||||
|
*/
|
||||||
|
pcr_write16(PID_ITSS, 0x314c, 0x0321);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void wait_for_legacy_dev(void *unused)
|
||||||
|
{
|
||||||
|
uint32_t legacy_delay, us_since_boot;
|
||||||
|
struct stopwatch sw;
|
||||||
|
|
||||||
|
/* Open main hwinfo block. */
|
||||||
|
if (hwilib_find_blocks("hwinfo.hex") != CB_SUCCESS)
|
||||||
|
return;
|
||||||
|
|
||||||
|
/* Get legacy delay parameter from hwinfo. */
|
||||||
|
if (hwilib_get_field(LegacyDelay, (uint8_t *) &legacy_delay,
|
||||||
|
sizeof(legacy_delay)) != sizeof(legacy_delay))
|
||||||
|
return;
|
||||||
|
|
||||||
|
us_since_boot = get_us_since_boot();
|
||||||
|
/* No need to wait if the time since boot is already long enough.*/
|
||||||
|
if (us_since_boot > legacy_delay)
|
||||||
|
return;
|
||||||
|
stopwatch_init_msecs_expire(&sw, (legacy_delay - us_since_boot) / 1000);
|
||||||
|
printk(BIOS_NOTICE, "Wait remaining %d of %d us for legacy devices...",
|
||||||
|
legacy_delay - us_since_boot, legacy_delay);
|
||||||
|
stopwatch_wait_until_expired(&sw);
|
||||||
|
printk(BIOS_NOTICE, "done!\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
static void finalize_boot(void *unused)
|
||||||
|
{
|
||||||
|
/* Set coreboot ready LED. */
|
||||||
|
gpio_output(CNV_RGI_DT, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
BOOT_STATE_INIT_ENTRY(BS_DEV_ENUMERATE, BS_ON_ENTRY, wait_for_legacy_dev, NULL);
|
||||||
|
BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_BOOT, BS_ON_ENTRY, finalize_boot, NULL);
|
|
@ -17,7 +17,7 @@
|
||||||
#include <lib.h>
|
#include <lib.h>
|
||||||
#include <hwilib.h>
|
#include <hwilib.h>
|
||||||
#include <device/i2c_simple.h>
|
#include <device/i2c_simple.h>
|
||||||
#include "ptn3460.h"
|
#include <variant/ptn3460.h>
|
||||||
|
|
||||||
/**
|
/**
|
||||||
* This function sets up the DP2LVDS-converter to be used with the appropriate
|
* This function sets up the DP2LVDS-converter to be used with the appropriate
|
Loading…
Reference in New Issue