This target is dead.
The company is dead. It causes builds to fail, and that is not a problem we need to have. Removing it to remove the problems it causes. Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Acked-by: Stefan Reinauer <stepan@coresystems.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3945 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Ronald G. Minnich
parent
31197a61d9
commit
66948f7e8c
|
|
@ -1,460 +0,0 @@
|
|||
##
|
||||
## Compute the location and size of where this firmware image
|
||||
## (coreboot plus bootloader) will live in the boot rom chip.
|
||||
##
|
||||
if USE_FALLBACK_IMAGE
|
||||
default ROM_SECTION_SIZE = FALLBACK_SIZE
|
||||
default ROM_SECTION_OFFSET = ( ROM_SIZE - FALLBACK_SIZE )
|
||||
else
|
||||
default ROM_SECTION_SIZE = ( ROM_SIZE - FALLBACK_SIZE )
|
||||
default ROM_SECTION_OFFSET = 0
|
||||
end
|
||||
|
||||
##
|
||||
## Compute the start location and size size of
|
||||
## The coreboot bootloader.
|
||||
##
|
||||
default PAYLOAD_SIZE = ( ROM_SECTION_SIZE - ROM_IMAGE_SIZE )
|
||||
default CONFIG_ROM_PAYLOAD_START = (0xffffffff - ROM_SIZE + ROM_SECTION_OFFSET + 1)
|
||||
|
||||
##
|
||||
## Compute where this copy of coreboot will start in the boot rom
|
||||
##
|
||||
default _ROMBASE = ( CONFIG_ROM_PAYLOAD_START + PAYLOAD_SIZE )
|
||||
|
||||
##
|
||||
## Compute a range of ROM that can cached to speed up coreboot,
|
||||
## execution speed.
|
||||
##
|
||||
## XIP_ROM_SIZE must be a power of 2.
|
||||
## XIP_ROM_BASE must be a multiple of XIP_ROM_SIZE
|
||||
##
|
||||
default XIP_ROM_SIZE=65536
|
||||
default XIP_ROM_BASE = ( _ROMBASE + ROM_IMAGE_SIZE - XIP_ROM_SIZE )
|
||||
|
||||
arch i386 end
|
||||
|
||||
##
|
||||
## Build the objects we have code for in this directory.
|
||||
##
|
||||
|
||||
driver mainboard.o
|
||||
if HAVE_MP_TABLE object mptable.o end
|
||||
if HAVE_PIRQ_TABLE object irq_tables.o end
|
||||
|
||||
#needed by irq_tables and mptable and acpi_tables
|
||||
#object get_bus_conf.o
|
||||
|
||||
if HAVE_ACPI_TABLES
|
||||
object acpi_tables_static.o
|
||||
object fadt.o
|
||||
|
||||
object dsdt.o
|
||||
|
||||
# makerule dsdt.c
|
||||
# depends "$(MAINBOARD)/dx/dsdt_lb.dsl"
|
||||
# action "iasl -tc $(MAINBOARD)/dx/dsdt_lb.dsl"
|
||||
# action "mv dsdt_lb.hex dsdt.c"
|
||||
# end
|
||||
# object ./dsdt.o
|
||||
#
|
||||
# makerule ssdt.c
|
||||
# depends "$(MAINBOARD)/ssdt_lb_x.dsl"
|
||||
# action "iasl -tc $(MAINBOARD)/ssdt_lb_x.dsl"
|
||||
# action "perl -pi -e 's/AmlCode/AmlCode_ssdt/g' ssdt_lb_x.hex"
|
||||
# action "mv ssdt_lb_x.hex ssdt.c"
|
||||
# end
|
||||
# object ./ssdt.o
|
||||
#
|
||||
# if ACPI_SSDTX_NUM
|
||||
# makerule ssdt2.c
|
||||
# depends "$(MAINBOARD)/dx/pci2.asl"
|
||||
# action "iasl -tc $(MAINBOARD)/dx/pci2.asl"
|
||||
# action "perl -pi -e 's/AmlCode/AmlCode_ssdt2/g' pci2.hex"
|
||||
# action "mv pci2.hex ssdt2.c"
|
||||
# end
|
||||
# object ./ssdt2.o
|
||||
# makerule ssdt3.c
|
||||
# depends "$(MAINBOARD)/dx/pci3.asl"
|
||||
# action "iasl -tc $(MAINBOARD)/dx/pci3.asl"
|
||||
# action "perl -pi -e 's/AmlCode/AmlCode_ssdt3/g' pci3.hex"
|
||||
# action "mv pci3.hex ssdt3.c"
|
||||
# end
|
||||
# object ./ssdt3.o
|
||||
# makerule ssdt4.c
|
||||
# depends "$(MAINBOARD)/dx/pci4.asl"
|
||||
# action "iasl -tc $(MAINBOARD)/dx/pci4.asl"
|
||||
# action "perl -pi -e 's/AmlCode/AmlCode_ssdt4/g' pci4.hex"
|
||||
# action "mv pci4.hex ssdt4.c"
|
||||
# end
|
||||
# object ./ssdt4.o
|
||||
#
|
||||
# end
|
||||
end
|
||||
|
||||
|
||||
|
||||
#object reset.o
|
||||
|
||||
# FIXME: This should be solved generically.
|
||||
#object vgabios.o
|
||||
#driver atiragexl.o
|
||||
|
||||
if USE_DCACHE_RAM
|
||||
|
||||
if CONFIG_USE_INIT
|
||||
# compile cache_as_ram.c to auto.o
|
||||
makerule ./cache_as_ram_auto.o
|
||||
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
|
||||
action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o cache_as_ram_auto.o"
|
||||
end
|
||||
|
||||
else
|
||||
#compile cache_as_ram.c to auto.inc
|
||||
makerule ./cache_as_ram_auto.inc
|
||||
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
|
||||
action "$(CC) $(DISTRO_CFLAGS) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall $(DEBUG_CFLAGS) -c -S -o $@"
|
||||
action "perl -e 's/\.rodata/.rom.data/g' -pi $@"
|
||||
action "perl -e 's/\.text/.section .rom.text/g' -pi $@"
|
||||
end
|
||||
|
||||
end
|
||||
else
|
||||
|
||||
##
|
||||
## Romcc output
|
||||
##
|
||||
makerule ./failover.E
|
||||
depends "$(MAINBOARD)/failover.c ../romcc"
|
||||
action "../romcc -E -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
|
||||
end
|
||||
|
||||
makerule ./failover.inc
|
||||
depends "$(MAINBOARD)/failover.c ../romcc"
|
||||
action "../romcc -O --label-prefix=failover -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/failover.c -o $@"
|
||||
end
|
||||
|
||||
makerule ./auto.E
|
||||
depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
|
||||
action "../romcc -E -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
|
||||
end
|
||||
makerule ./auto.inc
|
||||
depends "$(MAINBOARD)/auto.c option_table.h ../romcc"
|
||||
action "../romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
|
||||
end
|
||||
|
||||
end
|
||||
##
|
||||
## Build our 16 bit and 32 bit coreboot entry code
|
||||
##
|
||||
|
||||
mainboardinit cpu/x86/16bit/entry16.inc
|
||||
ldscript /cpu/x86/16bit/entry16.lds
|
||||
|
||||
mainboardinit cpu/x86/32bit/entry32.inc
|
||||
if USE_DCACHE_RAM
|
||||
if CONFIG_USE_INIT
|
||||
ldscript /cpu/x86/32bit/entry32.lds
|
||||
end
|
||||
|
||||
if CONFIG_USE_INIT
|
||||
ldscript /cpu/amd/car/cache_as_ram.lds
|
||||
end
|
||||
end
|
||||
|
||||
##
|
||||
## Build our reset vector (This is where coreboot is entered)
|
||||
##
|
||||
if USE_FALLBACK_IMAGE
|
||||
mainboardinit cpu/x86/16bit/reset16.inc
|
||||
ldscript /cpu/x86/16bit/reset16.lds
|
||||
else
|
||||
mainboardinit cpu/x86/32bit/reset32.inc
|
||||
ldscript /cpu/x86/32bit/reset32.lds
|
||||
end
|
||||
|
||||
if USE_DCACHE_RAM
|
||||
else
|
||||
### Should this be in the northbridge code?
|
||||
mainboardinit arch/i386/lib/cpu_reset.inc
|
||||
end
|
||||
|
||||
##
|
||||
## Include an id string (For safe flashing)
|
||||
##
|
||||
mainboardinit arch/i386/lib/id.inc
|
||||
ldscript /arch/i386/lib/id.lds
|
||||
|
||||
if USE_DCACHE_RAM
|
||||
##
|
||||
## Setup Cache-As-Ram
|
||||
##
|
||||
mainboardinit cpu/amd/car/cache_as_ram.inc
|
||||
end
|
||||
|
||||
###
|
||||
### This is the early phase of coreboot startup
|
||||
### Things are delicate and we test to see if we should
|
||||
### failover to another image.
|
||||
###
|
||||
if USE_FALLBACK_IMAGE
|
||||
if USE_DCACHE_RAM
|
||||
ldscript /arch/i386/lib/failover.lds
|
||||
else
|
||||
ldscript /arch/i386/lib/failover.lds
|
||||
mainboardinit ./failover.inc
|
||||
end
|
||||
end
|
||||
|
||||
###
|
||||
### O.k. We aren't just an intermediary anymore!
|
||||
###
|
||||
|
||||
##
|
||||
## Setup RAM
|
||||
##
|
||||
if USE_DCACHE_RAM
|
||||
|
||||
if CONFIG_USE_INIT
|
||||
initobject cache_as_ram_auto.o
|
||||
else
|
||||
mainboardinit ./cache_as_ram_auto.inc
|
||||
end
|
||||
|
||||
else
|
||||
|
||||
##
|
||||
## Setup RAM
|
||||
##
|
||||
mainboardinit cpu/x86/fpu/enable_fpu.inc
|
||||
mainboardinit cpu/x86/mmx/enable_mmx.inc
|
||||
mainboardinit cpu/x86/sse/enable_sse.inc
|
||||
mainboardinit ./auto.inc
|
||||
mainboardinit cpu/x86/sse/disable_sse.inc
|
||||
mainboardinit cpu/x86/mmx/disable_mmx.inc
|
||||
|
||||
end
|
||||
|
||||
##
|
||||
## Include the secondary Configuration files
|
||||
##
|
||||
|
||||
dir /pc80
|
||||
|
||||
config chip.h
|
||||
|
||||
# config for agami/aruma
|
||||
chip northbridge/amd/amdk8/root_complex
|
||||
device apic_cluster 0 on
|
||||
chip cpu/amd/socket_940
|
||||
device apic 0 on end
|
||||
end
|
||||
end
|
||||
device pci_domain 0 on
|
||||
chip northbridge/amd/amdk8
|
||||
device pci 18.0 on end # device pci 18.0
|
||||
device pci 18.0 on
|
||||
# devices on link 1, link 1 == LDT 1
|
||||
chip southbridge/amd/amd8131
|
||||
# the on/off keyword is mandatory
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 1.0 on end
|
||||
device pci 1.1 on end
|
||||
end # 8131
|
||||
chip southbridge/amd/amd8111
|
||||
# this "device pci 0.0" is the parent the next one
|
||||
# PCI bridge
|
||||
device pci 0.0 on
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 0.2 off end
|
||||
device pci 1.0 off end
|
||||
#chip drivers/ati/ragexl
|
||||
chip drivers/pci/onboard
|
||||
device pci 4.0 on end
|
||||
register "rom_address" = "0xfff80000"
|
||||
end
|
||||
end
|
||||
device pci 1.0 on
|
||||
chip superio/winbond/w83627hf
|
||||
device pnp 2e.0 on # Floppy
|
||||
io 0x60 = 0x3f0
|
||||
irq 0x70 = 6
|
||||
drq 0x74 = 2
|
||||
end
|
||||
device pnp 2e.1 off # Parallel Port
|
||||
io 0x60 = 0x378
|
||||
irq 0x70 = 7
|
||||
end
|
||||
device pnp 2e.2 on # Com1
|
||||
io 0x60 = 0x3f8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.3 on # Com2
|
||||
io 0x60 = 0x2f8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 2e.5 on # Keyboard
|
||||
io 0x60 = 0x60
|
||||
io 0x62 = 0x64
|
||||
irq 0x70 = 1
|
||||
irq 0x72 = 12
|
||||
end
|
||||
device pnp 2e.6 off # CIR
|
||||
io 0x60 = 0x100
|
||||
end
|
||||
device pnp 2e.7 off # GAME_MIDI_GIPO1
|
||||
io 0x60 = 0x201
|
||||
io 0x62 = 0x330
|
||||
irq 0x70 = 9
|
||||
end
|
||||
device pnp 2e.8 off end # GPIO2
|
||||
device pnp 2e.9 off end # GPIO3
|
||||
device pnp 2e.a off end # ACPI
|
||||
device pnp 2e.b on # HW Monitor
|
||||
io 0x60 = 0x290
|
||||
irq 0x70 = 5
|
||||
end
|
||||
end
|
||||
end
|
||||
device pci 1.1 on end
|
||||
device pci 1.2 on end
|
||||
device pci 1.3 on
|
||||
chip drivers/i2c/i2cmux2 # pca9545 smbus mux
|
||||
device i2c 71 on #pca9545 channel0
|
||||
chip drivers/i2c/adm1026
|
||||
device i2c 2d on end
|
||||
end
|
||||
end
|
||||
device i2c 71 on #pca9545 channel1
|
||||
chip drivers/generic/generic # fan board / pstray behind another mux
|
||||
device i2c 2d on end
|
||||
end
|
||||
end
|
||||
end
|
||||
chip drivers/i2c/i2cmux2 # pca9543 smbus mux
|
||||
device i2c 73 on #pca9543 channel0
|
||||
chip drivers/generic/generic #dimm 0-0-0
|
||||
device i2c 50 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 0-0-1
|
||||
device i2c 51 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 0-1-0
|
||||
device i2c 52 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 0-1-1
|
||||
device i2c 53 on end
|
||||
end
|
||||
end
|
||||
|
||||
device i2c 73 on #pca9543 channel1
|
||||
chip drivers/generic/generic #dimm 1-0-0
|
||||
device i2c 50 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 1-0-1
|
||||
device i2c 51 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 1-1-0
|
||||
device i2c 52 on end
|
||||
end
|
||||
chip drivers/generic/generic #dimm 1-1-1
|
||||
device i2c 53 on end
|
||||
end
|
||||
end
|
||||
end # chip end
|
||||
chip drivers/generic/generic # ICS950405AF
|
||||
device i2c 69 on end
|
||||
end
|
||||
end
|
||||
device pci 1.5 off end
|
||||
device pci 1.6 on end
|
||||
register "ide0_enable" = "1"
|
||||
register "ide1_enable" = "1"
|
||||
end # 8111
|
||||
end # LDT1
|
||||
device pci 18.0 on end # LDT2
|
||||
device pci 18.1 on end
|
||||
device pci 18.2 on end
|
||||
device pci 18.3 on end
|
||||
end
|
||||
|
||||
chip northbridge/amd/amdk8
|
||||
device pci 19.0 on end # LDT0
|
||||
device pci 19.0 on end # LDT1
|
||||
device pci 19.0 on # LDT2
|
||||
chip southbridge/amd/amd8131
|
||||
# the on/off keyword is mandatory
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 1.0 on end
|
||||
device pci 1.1 on end
|
||||
end
|
||||
chip southbridge/amd/amd8131
|
||||
# the on/off keyword is mandatory
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 1.0 on end
|
||||
device pci 1.1 on end
|
||||
end
|
||||
end # LDT2
|
||||
device pci 19.1 on end
|
||||
device pci 19.2 on end
|
||||
device pci 19.3 on end
|
||||
end
|
||||
|
||||
chip northbridge/amd/amdk8
|
||||
device pci 1a.0 on end
|
||||
device pci 1a.0 on end
|
||||
device pci 1a.0 on # LDT2
|
||||
chip southbridge/amd/amd8131
|
||||
# the on/off keyword is mandatory
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 1.0 on end
|
||||
device pci 1.1 on end
|
||||
end
|
||||
chip southbridge/amd/amd8131
|
||||
# the on/off keyword is mandatory
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 1.0 on end
|
||||
device pci 1.1 on end
|
||||
end
|
||||
|
||||
end # LDT2
|
||||
device pci 1a.1 on end
|
||||
device pci 1a.2 on end
|
||||
device pci 1a.3 on end
|
||||
end
|
||||
|
||||
chip northbridge/amd/amdk8
|
||||
device pci 1b.0 on end
|
||||
device pci 1b.0 on # LDT1
|
||||
chip southbridge/amd/amd8131
|
||||
# the on/off keyword is mandatory
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 1.0 on end
|
||||
device pci 1.1 on end
|
||||
end
|
||||
chip southbridge/amd/amd8131
|
||||
# the on/off keyword is mandatory
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 1.0 on end
|
||||
device pci 1.1 on end
|
||||
end
|
||||
|
||||
end
|
||||
device pci 1b.0 on end
|
||||
device pci 1b.1 on end
|
||||
device pci 1b.2 on end
|
||||
device pci 1b.3 on end
|
||||
end
|
||||
|
||||
|
||||
end
|
||||
end
|
||||
|
||||
|
|
@ -1,295 +0,0 @@
|
|||
uses HAVE_MP_TABLE
|
||||
uses HAVE_PIRQ_TABLE
|
||||
uses HAVE_ACPI_TABLES
|
||||
uses ACPI_SSDTX_NUM
|
||||
uses USE_FALLBACK_IMAGE
|
||||
uses HAVE_FALLBACK_BOOT
|
||||
uses HAVE_HARD_RESET
|
||||
uses IRQ_SLOT_COUNT
|
||||
uses HAVE_OPTION_TABLE
|
||||
uses CONFIG_MAX_CPUS
|
||||
uses CONFIG_MAX_PHYSICAL_CPUS
|
||||
uses CONFIG_LOGICAL_CPUS
|
||||
uses CONFIG_IOAPIC
|
||||
uses CONFIG_SMP
|
||||
uses FALLBACK_SIZE
|
||||
uses ROM_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_IMAGE_SIZE
|
||||
uses ROM_SECTION_SIZE
|
||||
uses ROM_SECTION_OFFSET
|
||||
uses CONFIG_ROM_PAYLOAD
|
||||
uses CONFIG_ROM_PAYLOAD_START
|
||||
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
|
||||
uses CONFIG_PRECOMPRESSED_PAYLOAD
|
||||
uses PAYLOAD_SIZE
|
||||
uses _ROMBASE
|
||||
uses XIP_ROM_SIZE
|
||||
uses XIP_ROM_BASE
|
||||
uses STACK_SIZE
|
||||
uses HEAP_SIZE
|
||||
uses USE_OPTION_TABLE
|
||||
uses LB_CKS_RANGE_START
|
||||
uses LB_CKS_RANGE_END
|
||||
uses LB_CKS_LOC
|
||||
uses MAINBOARD
|
||||
uses MAINBOARD_PART_NUMBER
|
||||
uses MAINBOARD_VENDOR
|
||||
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
|
||||
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
|
||||
uses COREBOOT_EXTRA_VERSION
|
||||
uses _RAMBASE
|
||||
uses CC
|
||||
uses HOSTCC
|
||||
uses CROSS_COMPILE
|
||||
uses TTYS0_BAUD
|
||||
uses TTYS0_BASE
|
||||
uses TTYS0_LCS
|
||||
uses DEFAULT_CONSOLE_LOGLEVEL
|
||||
uses MAXIMUM_CONSOLE_LOGLEVEL
|
||||
uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
|
||||
uses CONFIG_CONSOLE_SERIAL8250
|
||||
uses HAVE_INIT_TIMER
|
||||
uses CONFIG_GDB_STUB
|
||||
uses CONFIG_CONSOLE_VGA
|
||||
uses CONFIG_PCI_ROM_RUN
|
||||
uses CONFIG_CHIP_NAME
|
||||
|
||||
uses HT_CHAIN_UNITID_BASE
|
||||
uses HT_CHAIN_END_UNITID_BASE
|
||||
uses SB_HT_CHAIN_ON_BUS0
|
||||
uses SB_HT_CHAIN_UNITID_OFFSET_ONLY
|
||||
|
||||
uses USE_DCACHE_RAM
|
||||
uses DCACHE_RAM_BASE
|
||||
uses DCACHE_RAM_SIZE
|
||||
uses CONFIG_USE_INIT
|
||||
|
||||
uses CONFIG_USE_PRINTK_IN_CAR
|
||||
|
||||
|
||||
uses SERIAL_CPU_INIT
|
||||
|
||||
uses ENABLE_APIC_EXT_ID
|
||||
uses APIC_ID_OFFSET
|
||||
uses LIFT_BSP_APIC_ID
|
||||
|
||||
uses HW_MEM_HOLE_SIZEK
|
||||
uses CONFIG_PCI_64BIT_PREF_MEM
|
||||
|
||||
|
||||
###
|
||||
### Build options
|
||||
###
|
||||
|
||||
##
|
||||
## ROM_SIZE is the size of boot ROM that this board will use.
|
||||
##
|
||||
default ROM_SIZE=524288
|
||||
|
||||
##
|
||||
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
|
||||
##
|
||||
#default FALLBACK_SIZE=131072
|
||||
# 256k
|
||||
default FALLBACK_SIZE=0x40000
|
||||
|
||||
|
||||
##
|
||||
## Set this.
|
||||
##
|
||||
|
||||
default CONFIG_CHIP_NAME=1
|
||||
|
||||
|
||||
##
|
||||
## Build code for the fallback boot
|
||||
##
|
||||
default HAVE_FALLBACK_BOOT=1
|
||||
|
||||
##
|
||||
## Use hard_reset for rebooting, it uses reg. 0xcf9 in the amd8111.
|
||||
##
|
||||
default HAVE_HARD_RESET=1
|
||||
|
||||
##
|
||||
## set memory hole size
|
||||
##
|
||||
default HW_MEM_HOLE_SIZEK=0x300000
|
||||
#default HW_MEM_HOLE_SIZEK=0x200000
|
||||
|
||||
##
|
||||
## Build code to export a programmable irq routing table
|
||||
##
|
||||
default HAVE_PIRQ_TABLE=1
|
||||
default IRQ_SLOT_COUNT=23
|
||||
|
||||
##
|
||||
## Build code to export an x86 MP table
|
||||
## Useful for specifying IRQ routing values
|
||||
##
|
||||
default HAVE_MP_TABLE=1
|
||||
default HAVE_ACPI_TABLES=1
|
||||
|
||||
## extra SSDT num
|
||||
default ACPI_SSDTX_NUM=3
|
||||
|
||||
##
|
||||
## Build code to export a CMOS option table
|
||||
##
|
||||
default HAVE_OPTION_TABLE=1
|
||||
|
||||
##
|
||||
## Move the default coreboot cmos range off of AMD RTC registers
|
||||
##
|
||||
default LB_CKS_RANGE_START=49
|
||||
default LB_CKS_RANGE_END=122
|
||||
default LB_CKS_LOC=123
|
||||
|
||||
##
|
||||
## Build code for SMP support
|
||||
##
|
||||
default CONFIG_SMP=1
|
||||
default CONFIG_MAX_CPUS=8
|
||||
default CONFIG_MAX_PHYSICAL_CPUS=4
|
||||
default CONFIG_LOGICAL_CPUS=1
|
||||
#default ALLOW_HT_OVERCLOCKING=1
|
||||
|
||||
default ENABLE_APIC_EXT_ID=1
|
||||
default APIC_ID_OFFSET=0x10
|
||||
default LIFT_BSP_APIC_ID=1 # SDE was 0
|
||||
|
||||
#HT Unit ID offset
|
||||
#default HT_CHAIN_UNITID_BASE=0xa
|
||||
|
||||
#real SB Unit ID
|
||||
#default HT_CHAIN_END_UNITID_BASE=0x6
|
||||
|
||||
#make the SB HT chain on bus 0
|
||||
#default SB_HT_CHAIN_ON_BUS0=1
|
||||
|
||||
#allow capable device use that above 4G
|
||||
#default CONFIG_PCI_64BIT_PREF_MEM=1
|
||||
|
||||
##
|
||||
## enable CACHE_AS_RAM specifics
|
||||
##
|
||||
default USE_DCACHE_RAM=1
|
||||
default DCACHE_RAM_BASE=0xcc000
|
||||
default DCACHE_RAM_SIZE=0x4000
|
||||
default CONFIG_USE_INIT=0
|
||||
#default CONFIG_USE_INIT=1
|
||||
default CONFIG_USE_PRINTK_IN_CAR=1
|
||||
|
||||
##
|
||||
## Build code to setup a generic IOAPIC
|
||||
##
|
||||
default CONFIG_IOAPIC=1
|
||||
|
||||
##
|
||||
## Clean up the motherboard id strings
|
||||
##
|
||||
default MAINBOARD_PART_NUMBER="ARUMA"
|
||||
default MAINBOARD_VENDOR="AGAMI"
|
||||
default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x1022
|
||||
default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x36c0
|
||||
|
||||
|
||||
###
|
||||
### coreboot layout values
|
||||
###
|
||||
|
||||
## ROM_IMAGE_SIZE is the amount of space to allow coreboot to occupy.
|
||||
default ROM_IMAGE_SIZE = 65536
|
||||
|
||||
##
|
||||
## Use a small 8K stack
|
||||
##
|
||||
default STACK_SIZE=0x2000
|
||||
|
||||
##
|
||||
## Use a 32K heap
|
||||
##
|
||||
default HEAP_SIZE=0x8000
|
||||
|
||||
##
|
||||
## Only use the option table in a normal image
|
||||
##
|
||||
default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
|
||||
|
||||
##
|
||||
## Coreboot C code runs at this location in RAM
|
||||
##
|
||||
default _RAMBASE=0x00004000
|
||||
|
||||
##
|
||||
## Load the payload from the ROM
|
||||
##
|
||||
default CONFIG_ROM_PAYLOAD = 1
|
||||
|
||||
###
|
||||
### Defaults of options that you may want to override in the target config file
|
||||
###
|
||||
|
||||
##
|
||||
## The default compiler
|
||||
##
|
||||
default CC="$(CROSS_COMPILE)gcc -m32"
|
||||
default HOSTCC="gcc"
|
||||
|
||||
##
|
||||
## The Serial Console
|
||||
##
|
||||
|
||||
# To Enable the Serial Console
|
||||
default CONFIG_CONSOLE_SERIAL8250=1
|
||||
|
||||
## Select the serial console baud rate
|
||||
#default TTYS0_BAUD=115200
|
||||
#default TTYS0_BAUD=57600
|
||||
#default TTYS0_BAUD=38400
|
||||
#default TTYS0_BAUD=19200
|
||||
default TTYS0_BAUD=9600
|
||||
#default TTYS0_BAUD=4800
|
||||
#default TTYS0_BAUD=2400
|
||||
#default TTYS0_BAUD=1200
|
||||
|
||||
# Select the serial console base port
|
||||
default TTYS0_BASE=0x3f8
|
||||
|
||||
# Select the serial protocol
|
||||
# This defaults to 8 data bits, 1 stop bit, and no parity
|
||||
default TTYS0_LCS=0x3
|
||||
|
||||
##
|
||||
### Select the coreboot loglevel
|
||||
##
|
||||
## EMERG 1 system is unusable
|
||||
## ALERT 2 action must be taken immediately
|
||||
## CRIT 3 critical conditions
|
||||
## ERR 4 error conditions
|
||||
## WARNING 5 warning conditions
|
||||
## NOTICE 6 normal but significant condition
|
||||
## INFO 7 informational
|
||||
## DEBUG 8 debug-level messages
|
||||
## SPEW 9 Way too many details
|
||||
|
||||
|
||||
## These values can be overwritten by corebootv2/targets/agami/aruma/Config.lb
|
||||
## Request this level of debugging output
|
||||
default DEFAULT_CONSOLE_LOGLEVEL=8
|
||||
## At a maximum only compile in this level of debugging
|
||||
default MAXIMUM_CONSOLE_LOGLEVEL=8
|
||||
|
||||
##
|
||||
## Select power on after power fail setting
|
||||
default MAINBOARD_POWER_ON_AFTER_POWER_FAIL="MAINBOARD_POWER_ON"
|
||||
|
||||
#VGA
|
||||
default CONFIG_CONSOLE_VGA=1
|
||||
default CONFIG_PCI_ROM_RUN=1
|
||||
#default CONFIG_CONSOLE_VGA=0
|
||||
#default CONFIG_PCI_ROM_RUN=0
|
||||
|
||||
### End Options.lb
|
||||
end
|
||||
|
|
@ -1,333 +0,0 @@
|
|||
/*
|
||||
* Agami Aruma ACPI support
|
||||
*
|
||||
* Copyright 2005 Stefan Reinauer
|
||||
* Copyright 2005 AMD
|
||||
*
|
||||
* written by Stefan Reinauer <stepan@openbios.org>
|
||||
* 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB
|
||||
*/
|
||||
|
||||
#include <console/console.h>
|
||||
#include <string.h>
|
||||
#include <arch/acpi.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <cpu/x86/msr.h>
|
||||
#include <cpu/amd/mtrr.h>
|
||||
#include <../../../northbridge/amd/amdk8/amdk8_acpi.h>
|
||||
|
||||
#define DUMP_ACPI_TABLES 0
|
||||
|
||||
#if DUMP_ACPI_TABLES == 1
|
||||
static void dump_mem(unsigned start, unsigned end)
|
||||
{
|
||||
|
||||
unsigned i;
|
||||
print_debug("dump_mem:");
|
||||
for (i = start; i < end; i++) {
|
||||
if ((i & 0xf) == 0) {
|
||||
printk_debug("\n%08x:", i);
|
||||
}
|
||||
printk_debug(" %02x",
|
||||
(unsigned char) *((unsigned char *) i));
|
||||
}
|
||||
print_debug("\n");
|
||||
}
|
||||
#endif
|
||||
|
||||
#define HC_POSSIBLE_NUM 8
|
||||
extern unsigned char AmlCode[];
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
extern unsigned char AmlCode_ssdt2[];
|
||||
extern unsigned char AmlCode_ssdt3[];
|
||||
extern unsigned char AmlCode_ssdt4[];
|
||||
//extern unsigned char AmlCode_ssdt5[];
|
||||
//extern unsigned char AmlCode_ssdt6[];
|
||||
//extern unsigned char AmlCode_ssdt7[];
|
||||
//extern unsigned char AmlCode_ssdt8[];
|
||||
#endif
|
||||
|
||||
#define IO_APIC_ADDR 0xfec00000UL
|
||||
|
||||
extern unsigned char bus_isa;
|
||||
extern unsigned char bus_8111_0;
|
||||
extern unsigned char bus_8111_1;
|
||||
extern unsigned char bus_8131[7][3]; // another 6 8131
|
||||
extern unsigned apicid_8111;
|
||||
extern unsigned apicid_8131[7][2];
|
||||
|
||||
extern unsigned pci1234[];
|
||||
extern unsigned hc_possible_num;
|
||||
extern unsigned sblk;
|
||||
extern unsigned sbdn;
|
||||
extern unsigned hcdn[];
|
||||
extern unsigned sbdnx[7]; // for all 8131
|
||||
|
||||
unsigned long acpi_fill_mcfg(unsigned long current)
|
||||
{
|
||||
/* Just a dummy */
|
||||
return current;
|
||||
}
|
||||
|
||||
unsigned long acpi_fill_madt(unsigned long current)
|
||||
{
|
||||
unsigned int gsi_base = 0x18;
|
||||
|
||||
/* create all subtables for processors */
|
||||
current = acpi_create_madt_lapics(current);
|
||||
|
||||
/* Write 8111 IOAPIC */
|
||||
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
|
||||
apicid_8111, IO_APIC_ADDR, 0);
|
||||
|
||||
/* Write all 8131/8132 IOAPICs */
|
||||
{
|
||||
device_t dev;
|
||||
struct resource *res;
|
||||
dev = dev_find_slot(bus_8131[0][0], PCI_DEVFN(sbdnx[0], 1));
|
||||
|
||||
if (dev) {
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0);
|
||||
if (res) {
|
||||
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
|
||||
apicid_8131[0][0], res->base, gsi_base);
|
||||
gsi_base += 4;
|
||||
|
||||
}
|
||||
}
|
||||
dev = dev_find_slot(bus_8131[0][0], PCI_DEVFN(sbdnx[0] + 1, 1));
|
||||
if (dev) {
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0);
|
||||
if (res) {
|
||||
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
|
||||
apicid_8131[0][1], res->base, gsi_base);
|
||||
gsi_base += 4;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
int i;
|
||||
for (i = 1; i < hc_possible_num; i++)
|
||||
{ // 0: is hc sblink
|
||||
device_t dev;
|
||||
int j;
|
||||
struct resource *res;
|
||||
|
||||
if ((pci1234[i] & 1) != 1)
|
||||
continue;
|
||||
|
||||
j = (i - 1) * 2 + 1;
|
||||
dev = dev_find_slot(bus_8131[j][0], PCI_DEVFN(sbdnx[j], 1));
|
||||
|
||||
if (dev) {
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0);
|
||||
if (res) {
|
||||
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
|
||||
apicid_8131[j][0], res->base, gsi_base);
|
||||
gsi_base += 4;
|
||||
|
||||
}
|
||||
}
|
||||
dev =
|
||||
dev_find_slot(bus_8131[j][0],
|
||||
PCI_DEVFN(sbdnx[j] + 1, 1));
|
||||
if (dev)
|
||||
{
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0);
|
||||
if (res) {
|
||||
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
|
||||
apicid_8131[j][1], res->base, gsi_base);
|
||||
gsi_base += 4;
|
||||
}
|
||||
}
|
||||
|
||||
dev =
|
||||
dev_find_slot(bus_8131[j + 1][0],
|
||||
PCI_DEVFN(sbdnx[j + 1], 1));
|
||||
|
||||
if (dev)
|
||||
{
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0);
|
||||
if (res) {
|
||||
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
|
||||
apicid_8131[j + 1][0], res->base, gsi_base);
|
||||
gsi_base += 4;
|
||||
|
||||
}
|
||||
}
|
||||
dev = dev_find_slot(bus_8131[j + 1][0], PCI_DEVFN(sbdnx[j + 1] + 1, 1));
|
||||
if (dev)
|
||||
{
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0);
|
||||
if (res) {
|
||||
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *) current,
|
||||
apicid_8131[j + 1][1], res->base, gsi_base);
|
||||
gsi_base += 4;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
}
|
||||
|
||||
|
||||
current += acpi_create_madt_irqoverride((acpi_madt_irqoverride_t *) current, 0, 0, 2, 5);
|
||||
/* 0: mean bus 0--->ISA */
|
||||
/* 0: PIC 0 */
|
||||
/* 2: APIC 2 */
|
||||
/* 5 mean: 0101 --> Edige-triggered, Active high */
|
||||
|
||||
|
||||
/* create all subtables for processors */
|
||||
current = acpi_create_madt_lapic_nmis(current, 5, 1);
|
||||
/* 1: LINT1 connect to NMI */
|
||||
|
||||
|
||||
return current;
|
||||
}
|
||||
|
||||
unsigned long acpi_fill_ssdt_generator(unsigned long current, char *oem_table_id) {
|
||||
k8acpi_write_vars();
|
||||
return (unsigned long) (acpigen_get_current());
|
||||
}
|
||||
|
||||
unsigned long write_acpi_tables(unsigned long start)
|
||||
{
|
||||
unsigned long current;
|
||||
acpi_rsdp_t *rsdp;
|
||||
acpi_rsdt_t *rsdt;
|
||||
acpi_hpet_t *hpet;
|
||||
acpi_madt_t *madt;
|
||||
acpi_srat_t *srat;
|
||||
acpi_fadt_t *fadt;
|
||||
acpi_facs_t *facs;
|
||||
acpi_header_t *dsdt;
|
||||
acpi_header_t *ssdt;
|
||||
acpi_header_t *ssdtx;
|
||||
|
||||
unsigned char *AmlCode_ssdtx[HC_POSSIBLE_NUM];
|
||||
|
||||
int i;
|
||||
|
||||
/* Align ACPI tables to 16byte */
|
||||
start = (start + 0x0f) & -0x10;
|
||||
current = start;
|
||||
|
||||
printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
|
||||
|
||||
/* We need at least an RSDP and an RSDT Table */
|
||||
rsdp = (acpi_rsdp_t *) current;
|
||||
current += sizeof(acpi_rsdp_t);
|
||||
rsdt = (acpi_rsdt_t *) current;
|
||||
current += sizeof(acpi_rsdt_t);
|
||||
|
||||
/* clear all table memory */
|
||||
memset((void *) start, 0, current - start);
|
||||
|
||||
acpi_write_rsdp(rsdp, rsdt);
|
||||
acpi_write_rsdt(rsdt);
|
||||
|
||||
get_bus_conf(); // get sblk, pci1234, and sbdn
|
||||
|
||||
/*
|
||||
* We explicitly add these tables later on:
|
||||
*/
|
||||
printk_debug("ACPI: * HPET\n");
|
||||
hpet = (acpi_hpet_t *) current;
|
||||
current += sizeof(acpi_hpet_t);
|
||||
acpi_create_hpet(hpet);
|
||||
acpi_add_table(rsdt, hpet);
|
||||
|
||||
/* If we want to use HPET Timers Linux wants an MADT */
|
||||
printk_debug("ACPI: * MADT\n");
|
||||
madt = (acpi_madt_t *) current;
|
||||
acpi_create_madt(madt);
|
||||
current += madt->header.length;
|
||||
acpi_add_table(rsdt, madt);
|
||||
|
||||
/* SRAT */
|
||||
printk_debug("ACPI: * SRAT\n");
|
||||
srat = (acpi_srat_t *) current;
|
||||
acpi_create_srat(srat);
|
||||
current += srat->header.length;
|
||||
acpi_add_table(rsdt, srat);
|
||||
|
||||
/* SSDT */
|
||||
printk_debug("ACPI: * SSDT\n");
|
||||
ssdt = (acpi_header_t *)current;
|
||||
|
||||
acpi_create_ssdt_generator(ssdt, "DYNADATA");
|
||||
current += ssdt->length;
|
||||
acpi_add_table(rsdt, ssdt);
|
||||
|
||||
#if ACPI_SSDTX_NUM >= 1
|
||||
// we need to make ssdt2 match to PCI2 in pci2.asl,... pci1234[1]
|
||||
AmlCode_ssdtx[1] = AmlCode_ssdt2; // if you have different HT IO card for the same ht slot, here need to check vendor id, to set coresponding SSDT
|
||||
AmlCode_ssdtx[2] = AmlCode_ssdt3;
|
||||
AmlCode_ssdtx[3] = AmlCode_ssdt4;
|
||||
// AmlCode_ssdtx[4] = AmlCode_ssdt5;
|
||||
// AmlCode_ssdtx[5] = AmlCode_ssdt6;
|
||||
// AmlCode_ssdtx[6] = AmlCode_ssdt7;
|
||||
// AmlCode_ssdtx[7] = AmlCode_ssdt8;
|
||||
|
||||
//same htio, but different possition? We may have to copy, change HCIN, and recalculate the checknum and add_table
|
||||
|
||||
for (i = 1; i < hc_possible_num; i++) { // 0: is hc sblink
|
||||
if ((pci1234[i] & 1) != 1)
|
||||
continue;
|
||||
printk_debug("ACPI: * SSDT for PCI%d\n", i + 1); //pci0 and pci1 are in dsdt
|
||||
ssdtx = (acpi_header_t *) current;
|
||||
current += ((acpi_header_t *) AmlCode_ssdtx[i])->length;
|
||||
memcpy((void *) ssdtx, (void *) AmlCode_ssdtx[i],
|
||||
((acpi_header_t *) AmlCode_ssdtx[i])->length);
|
||||
acpi_add_table(rsdt, ssdtx);
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/* FACS */
|
||||
printk_debug("ACPI: * FACS\n");
|
||||
facs = (acpi_facs_t *) current;
|
||||
current += sizeof(acpi_facs_t);
|
||||
acpi_create_facs(facs);
|
||||
|
||||
/* DSDT */
|
||||
printk_debug("ACPI: * DSDT\n");
|
||||
dsdt = (acpi_header_t *) current;
|
||||
current += ((acpi_header_t *) AmlCode)->length;
|
||||
memcpy((void *) dsdt, (void *) AmlCode,
|
||||
((acpi_header_t *) AmlCode)->length);
|
||||
printk_debug("ACPI: * DSDT @ %08x Length %x\n", dsdt,
|
||||
dsdt->length);
|
||||
|
||||
/* FDAT */
|
||||
printk_debug("ACPI: * FADT\n");
|
||||
fadt = (acpi_fadt_t *) current;
|
||||
current += sizeof(acpi_fadt_t);
|
||||
|
||||
acpi_create_fadt(fadt, facs, dsdt);
|
||||
acpi_add_table(rsdt, fadt);
|
||||
|
||||
#if DUMP_ACPI_TABLES == 1
|
||||
printk_debug("rsdp\n");
|
||||
dump_mem(rsdp, ((void *) rsdp) + sizeof(acpi_rsdp_t));
|
||||
|
||||
printk_debug("rsdt\n");
|
||||
dump_mem(rsdt, ((void *) rsdt) + sizeof(acpi_rsdt_t));
|
||||
|
||||
printk_debug("madt\n");
|
||||
dump_mem(madt, ((void *) madt) + madt->header.length);
|
||||
|
||||
printk_debug("srat\n");
|
||||
dump_mem(srat, ((void *) srat) + srat->header.length);
|
||||
|
||||
printk_debug("ssdt\n");
|
||||
dump_mem(ssdt, ((void *) ssdt) + ssdt->length);
|
||||
|
||||
printk_debug("fadt\n");
|
||||
dump_mem(fadt, ((void *) fadt) + fadt->header.length);
|
||||
#endif
|
||||
|
||||
printk_info("ACPI: done.\n");
|
||||
return current;
|
||||
}
|
||||
|
|
@ -1,252 +0,0 @@
|
|||
/*
|
||||
* Agami Aruma ACPI support
|
||||
*
|
||||
* written by Stefan Reinauer <stepan@coresystems.de>
|
||||
* (C) 2005 Stefan Reinauer
|
||||
* (C) 2007 coresystems GmbH
|
||||
*/
|
||||
|
||||
#include <console/console.h>
|
||||
#include <string.h>
|
||||
#include <arch/acpi.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
|
||||
extern unsigned char AmlCode[];
|
||||
|
||||
unsigned long acpi_fill_mcfg(unsigned long current)
|
||||
{
|
||||
/* Just a dummy */
|
||||
return current;
|
||||
}
|
||||
|
||||
|
||||
#define IO_APIC_ADDR 0xfec00000UL
|
||||
|
||||
unsigned long acpi_fill_madt(unsigned long current)
|
||||
{
|
||||
unsigned int gsi_base=0x18, ioapic_nr=2, i;
|
||||
device_t dev=0;
|
||||
|
||||
/* creare all subtables for 4p */
|
||||
#ifdef PRE_REVE
|
||||
current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 0);
|
||||
current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 17);
|
||||
current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 18);
|
||||
current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 19);
|
||||
#endif
|
||||
current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 0, 16);
|
||||
current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 1, 18);
|
||||
current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 2, 20);
|
||||
current += acpi_create_madt_lapic((acpi_madt_lapic_t *)current, 3, 22);
|
||||
|
||||
/* Write 8111 IOAPIC */
|
||||
current += acpi_create_madt_ioapic((acpi_madt_ioapic_t *)current, 1,
|
||||
IO_APIC_ADDR, 0);
|
||||
|
||||
/* Write the first 8131 IOAPICs */
|
||||
for(i = 0; i < 2; i++) {
|
||||
if (dev = dev_find_device(PCI_VENDOR_ID_AMD, 0x7451, dev)){
|
||||
ACPI_WRITE_MADT_IOAPIC(dev, ioapic_nr);
|
||||
ioapic_nr++;
|
||||
}
|
||||
}
|
||||
|
||||
/* Write the 8132 IOAPICs if they exist */
|
||||
for(i = 0; i < 4; i++) {
|
||||
if (dev = dev_find_device(PCI_VENDOR_ID_AMD, 0x7459, dev)){
|
||||
ACPI_WRITE_MADT_IOAPIC(dev, ioapic_nr);
|
||||
ioapic_nr++;
|
||||
}
|
||||
}
|
||||
|
||||
/* in the event there were no 8132s reset dev and look for the 8131s */
|
||||
/* first skip the onboard 8131 */
|
||||
dev=dev_find_device(PCI_VENDOR_ID_AMD, 0x7451, 0);
|
||||
dev=dev_find_device(PCI_VENDOR_ID_AMD, 0x7451, dev);
|
||||
|
||||
/* Write all 8131 IOAPICs */
|
||||
while((dev = dev_find_device(PCI_VENDOR_ID_AMD, 0x7451, dev))) {
|
||||
ACPI_WRITE_MADT_IOAPIC(dev, ioapic_nr);
|
||||
ioapic_nr++;
|
||||
}
|
||||
|
||||
current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *)
|
||||
current, 1, 0, 2, 0 );
|
||||
|
||||
current += acpi_create_madt_irqoverride( (acpi_madt_irqoverride_t *)
|
||||
current, 1, 0, 2, 0 );
|
||||
|
||||
return current;
|
||||
}
|
||||
|
||||
|
||||
/* The next two tables are used by our DSDT and are freely defined
|
||||
* here. This construct is used because the bus numbers containing
|
||||
* the 8131 bridges may vary so that we need to pass coreboot
|
||||
* knowledge into the DSDT
|
||||
*/
|
||||
typedef struct lnxc_busses {
|
||||
u8 secondary;
|
||||
u8 subordinate;
|
||||
} acpi_lnxb_busses_t;
|
||||
|
||||
typedef struct acpi_lnxb {
|
||||
struct acpi_table_header header;
|
||||
acpi_lnxb_busses_t busses[5];
|
||||
} acpi_lnxb_t;
|
||||
|
||||
/* special coreboot acpi table */
|
||||
void acpi_create_lnxb(acpi_lnxb_t *lnxb)
|
||||
{
|
||||
device_t dev;
|
||||
int busidx=0;
|
||||
|
||||
acpi_header_t *header=&(lnxb->header);
|
||||
|
||||
/* fill out header fields */
|
||||
memcpy(header->signature, "LNXB", 4);
|
||||
memcpy(header->oem_id, OEM_ID, 6);
|
||||
memcpy(header->oem_table_id, "LNXBIOS ", 8);
|
||||
memcpy(header->asl_compiler_id, ASLC, 4);
|
||||
|
||||
header->length = sizeof(acpi_lnxb_t);
|
||||
header->revision = 1;
|
||||
|
||||
/*
|
||||
* Write external 8131 bus ranges
|
||||
*/
|
||||
/* first skip the onboard 8131 */
|
||||
dev=dev_find_device(PCI_VENDOR_ID_AMD, 0x7450, 0);
|
||||
dev=dev_find_device(PCI_VENDOR_ID_AMD, 0x7450, dev);
|
||||
/* now look at the last 8131 in each chain,
|
||||
* as it contains the valid bus ranges
|
||||
*/
|
||||
/* Add a check for 8132 devices, device ID == 0x7458 */
|
||||
while((dev = dev_find_device(PCI_VENDOR_ID_AMD, 0x7458, dev))
|
||||
&& busidx<5 ) {
|
||||
int subu, fn, slot;
|
||||
acpi_lnxb_busses_t *busses;
|
||||
|
||||
if(PCI_SLOT(dev->path.u.pci.devfn)!=4)
|
||||
continue;
|
||||
|
||||
busses=&(lnxb->busses[busidx]);
|
||||
lnxb->busses[busidx].secondary = dev->bus->secondary;
|
||||
lnxb->busses[busidx].subordinate =
|
||||
pci_read_config8(dev, PCI_SUBORDINATE_BUS);
|
||||
#if 0
|
||||
/* SDE-test print out lnbx table values */
|
||||
printk_info("ACPI: 7458 lnxb value, secondary %lx, subordinate %1x \n",
|
||||
lnxb->busses[busidx].secondary, lnxb->busses[busidx].subordinate);
|
||||
#endif
|
||||
busidx++;
|
||||
}
|
||||
dev=dev_find_device(PCI_VENDOR_ID_AMD, 0x7450, 0);
|
||||
dev=dev_find_device(PCI_VENDOR_ID_AMD, 0x7450, dev);
|
||||
while((dev = dev_find_device(PCI_VENDOR_ID_AMD, 0x7450, dev))
|
||||
&& busidx<5 ) {
|
||||
int subu, fn, slot;
|
||||
acpi_lnxb_busses_t *busses;
|
||||
|
||||
if(PCI_SLOT(dev->path.u.pci.devfn)!=4)
|
||||
continue;
|
||||
|
||||
busses=&(lnxb->busses[busidx]);
|
||||
lnxb->busses[busidx].secondary = dev->bus->secondary;
|
||||
lnxb->busses[busidx].subordinate =
|
||||
pci_read_config8(dev, PCI_SUBORDINATE_BUS);
|
||||
#if 0
|
||||
/* SDE-test print out lnbx table values */
|
||||
printk_info("ACPI: 7450 lnxb value, secondary %lx, subordinate %1x \n",
|
||||
lnxb->busses[busidx].secondary, lnxb->busses[busidx].subordinate);
|
||||
#endif
|
||||
busidx++;
|
||||
}
|
||||
header->checksum = acpi_checksum((void *)lnxb, sizeof(acpi_lnxb_t));
|
||||
}
|
||||
|
||||
|
||||
|
||||
unsigned long write_acpi_tables(unsigned long start)
|
||||
{
|
||||
unsigned long current;
|
||||
acpi_rsdp_t *rsdp;
|
||||
acpi_rsdt_t *rsdt;
|
||||
acpi_hpet_t *hpet;
|
||||
acpi_madt_t *madt;
|
||||
acpi_fadt_t *fadt;
|
||||
acpi_facs_t *facs;
|
||||
acpi_lnxb_t *lnxb;
|
||||
acpi_header_t *dsdt;
|
||||
|
||||
/* Align ACPI tables to 16byte */
|
||||
start = ( start + 0x0f ) & -0x10;
|
||||
current = start;
|
||||
|
||||
printk_info("ACPI: Writing ACPI tables at %lx...\n", start);
|
||||
|
||||
/* We need at least an RSDP and an RSDT Table */
|
||||
rsdp = (acpi_rsdp_t *) current;
|
||||
current += sizeof(acpi_rsdp_t);
|
||||
rsdt = (acpi_rsdt_t *) current;
|
||||
current += sizeof(acpi_rsdt_t);
|
||||
|
||||
/* clear all table memory */
|
||||
memset((void *)start, 0, current - start);
|
||||
|
||||
acpi_write_rsdp(rsdp, rsdt);
|
||||
acpi_write_rsdt(rsdt);
|
||||
|
||||
/*
|
||||
* We explicitly add these tables later on:
|
||||
*/
|
||||
printk_debug("ACPI: * HPET\n");
|
||||
|
||||
hpet = (acpi_hpet_t *) current;
|
||||
current += sizeof(acpi_hpet_t);
|
||||
acpi_create_hpet(hpet);
|
||||
acpi_add_table(rsdt,hpet);
|
||||
|
||||
/* If we want to use HPET Timers Linux wants an MADT */
|
||||
printk_debug("ACPI: * MADT\n");
|
||||
|
||||
madt = (acpi_madt_t *) current;
|
||||
acpi_create_madt(madt);
|
||||
current+=madt->header.length;
|
||||
acpi_add_table(rsdt,madt);
|
||||
|
||||
printk_debug("ACPI: * LNXB\n");
|
||||
lnxb=(acpi_lnxb_t *)current;
|
||||
current += sizeof(acpi_facs_t);
|
||||
acpi_create_lnxb(lnxb);
|
||||
|
||||
printk_debug("ACPI: * FACS\n");
|
||||
facs = (acpi_facs_t *) current;
|
||||
current += sizeof(acpi_facs_t);
|
||||
acpi_create_facs(facs);
|
||||
|
||||
dsdt = (acpi_header_t *)current;
|
||||
current += ((acpi_header_t *)AmlCode)->length;
|
||||
memcpy((void *)dsdt,(void *)AmlCode, \
|
||||
((acpi_header_t *)AmlCode)->length);
|
||||
|
||||
/* fix up dsdt */
|
||||
((u32 *)dsdt)[11]=((u32)lnxb)+sizeof(acpi_header_t);
|
||||
|
||||
/* recalculate checksum */
|
||||
dsdt->checksum = 0;
|
||||
dsdt->checksum = acpi_checksum(dsdt,dsdt->length);
|
||||
printk_debug("ACPI: * DSDT @ %08x Length %x\n",dsdt,dsdt->length);
|
||||
printk_debug("ACPI: * FADT\n");
|
||||
|
||||
fadt = (acpi_fadt_t *) current;
|
||||
current += sizeof(acpi_fadt_t);
|
||||
|
||||
acpi_create_fadt(fadt,facs,dsdt);
|
||||
acpi_add_table(rsdt,fadt);
|
||||
|
||||
printk_info("ACPI: done.\n");
|
||||
return current;
|
||||
}
|
||||
|
||||
|
|
@ -1,181 +0,0 @@
|
|||
#define ASSEMBLY 1
|
||||
#include <stdint.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pnp_def.h>
|
||||
#include <arch/romcc_io.h>
|
||||
#include <cpu/x86/lapic.h>
|
||||
#include <arch/cpu.h>
|
||||
#include <stdlib.h>
|
||||
#include "option_table.h"
|
||||
#include "pc80/mc146818rtc_early.c"
|
||||
#include "pc80/serial.c"
|
||||
#include "arch/i386/lib/console.c"
|
||||
#include "ram/ramtest.c"
|
||||
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
|
||||
#include "northbridge/amd/amdk8/raminit.h"
|
||||
#include "cpu/amd/model_fxx/apic_timer.c"
|
||||
#include "lib/delay.c"
|
||||
#include "cpu/x86/lapic/boot_cpu.c"
|
||||
#include "northbridge/amd/amdk8/reset_test.c"
|
||||
#include "northbridge/amd/amdk8/debug.c"
|
||||
#include <cpu/amd/model_fxx_rev.h>
|
||||
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
|
||||
#include "cpu/amd/mtrr/amd_earlymtrr.c"
|
||||
#include "cpu/x86/bist.h"
|
||||
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
|
||||
|
||||
static void hard_reset(void)
|
||||
{
|
||||
set_bios_reset();
|
||||
// pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
|
||||
// outb(0x0e, 0x0cf9);
|
||||
outb(0x06, 0x0cf9); /* this value will assert RESET_L and LDTRST_L */
|
||||
}
|
||||
|
||||
static void soft_reset(void)
|
||||
{
|
||||
set_bios_reset();
|
||||
pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
|
||||
}
|
||||
|
||||
/*
|
||||
* GPIO28 of 8111 will control H0_MEMRESET_L
|
||||
* GPIO29 of 8111 will control H1_MEMRESET_L
|
||||
*/
|
||||
static void memreset_setup(void)
|
||||
{
|
||||
if (is_cpu_pre_c0()) {
|
||||
/* Set the memreset low */
|
||||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0),
|
||||
SMBUS_IO_BASE + 0xc0 + 28);
|
||||
/* Ensure the BIOS has control of the memory lines */
|
||||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0),
|
||||
SMBUS_IO_BASE + 0xc0 + 29);
|
||||
} else {
|
||||
/* Ensure the CPU has controll of the memory lines */
|
||||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0),
|
||||
SMBUS_IO_BASE + 0xc0 + 29);
|
||||
}
|
||||
}
|
||||
|
||||
static void memreset(int controllers, const struct mem_controller *ctrl)
|
||||
{
|
||||
if (is_cpu_pre_c0()) {
|
||||
udelay(800);
|
||||
/* Set memreset_high */
|
||||
outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0),
|
||||
SMBUS_IO_BASE + 0xc0 + 28);
|
||||
udelay(90);
|
||||
}
|
||||
}
|
||||
|
||||
static inline void activate_spd_rom(const struct mem_controller *ctrl)
|
||||
{
|
||||
#define SMBUS_SWITCH1 0x71
|
||||
#define SMBUS_SWITCH2 0x73
|
||||
/* Switch 1: pca 9545, Switch 2: pca 9543 */
|
||||
unsigned device = (ctrl->channel0[0]) >> 8;
|
||||
/* Disable all outputs on SMBus switch 1 */
|
||||
smbus_send_byte(SMBUS_SWITCH1, 0x0);
|
||||
/* Select SMBus switch 2 Channel 0/1 */
|
||||
smbus_send_byte(SMBUS_SWITCH2, device);
|
||||
}
|
||||
|
||||
static inline int spd_read_byte(unsigned device, unsigned address)
|
||||
{
|
||||
return smbus_read_byte(device, address);
|
||||
}
|
||||
|
||||
#include "northbridge/amd/amdk8/raminit.c"
|
||||
#include "northbridge/amd/amdk8/coherent_ht.c"
|
||||
#include "northbridge/amd/amdk8/incoherent_ht.c"
|
||||
#include "cpu/amd/dualcore/dualcore.c"
|
||||
#include "sdram/generic_sdram.c"
|
||||
#include "resourcemap.c"
|
||||
|
||||
#define CHAN0 0x100
|
||||
#define CHAN1 0x200
|
||||
|
||||
#define NODE_RAM(x) \
|
||||
.node_id = 0+x, \
|
||||
.f0 = PCI_DEV(0, 0x18+x, 0), \
|
||||
.f1 = PCI_DEV(0, 0x18+x, 1), \
|
||||
.f2 = PCI_DEV(0, 0x18+x, 2), \
|
||||
.f3 = PCI_DEV(0, 0x18+x, 3)
|
||||
|
||||
static void main(unsigned long bist)
|
||||
{
|
||||
static const struct mem_controller cpu[] = {
|
||||
{ NODE_RAM(0),
|
||||
.channel0 = { (0xa0>>1)|CHAN0, (0xa4>>1)|CHAN0, 0, 0 },
|
||||
.channel1 = { (0xa2>>1)|CHAN0, (0xa6>>1)|CHAN0, 0, 0 }
|
||||
},
|
||||
{ NODE_RAM(1),
|
||||
.channel0 = { (0xa8>>1)|CHAN0, (0xac>>1)|CHAN0, 0, 0 },
|
||||
.channel1 = { (0xaa>>1)|CHAN0, (0xae>>1)|CHAN0, 0, 0 }
|
||||
},
|
||||
{ NODE_RAM(2),
|
||||
.channel0 = { (0xa8>>1)|CHAN1, (0xac>>1)|CHAN1, 0, 0 },
|
||||
.channel1 = { (0xaa>>1)|CHAN1, (0xae>>1)|CHAN1, 0, 0 }
|
||||
},
|
||||
{ NODE_RAM(3),
|
||||
.channel0 = { (0xa0>>1)|CHAN1, (0xa4>>1)|CHAN1, 0, 0 },
|
||||
.channel1 = { (0xa2>>1)|CHAN1, (0xa6>>1)|CHAN1, 0, 0 }
|
||||
}
|
||||
};
|
||||
|
||||
int needs_reset;
|
||||
|
||||
if (bist == 0) {
|
||||
k8_init_and_stop_secondaries();
|
||||
}
|
||||
/* Setup the console */
|
||||
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
|
||||
uart_init();
|
||||
console_init();
|
||||
|
||||
/* Halt if there was a built in self test failure */
|
||||
report_bist_failure(bist);
|
||||
|
||||
setup_aruma_resource_map();
|
||||
needs_reset = setup_coherent_ht_domain();
|
||||
needs_reset=ht_setup_chains_x();
|
||||
|
||||
#if 0
|
||||
dump_pci_devices();
|
||||
#endif
|
||||
#if 0
|
||||
print_pci_devices();
|
||||
#endif
|
||||
|
||||
//#if (ALLOW_HT_OVERCLOCKING==1) && (USE_FALLBACK_IMAGE==0)
|
||||
// if(read_option(CMOS_VSTART_amdk8_1GHz, CMOS_VLEN_amdk8_1GHz, 0))
|
||||
// {
|
||||
// print_debug("AMDK8 allowed at 1GHz\r\n");
|
||||
// } else {
|
||||
// print_debug("AMDK8 allowed at 800Hz only\r\n");
|
||||
// }
|
||||
// if(read_option(CMOS_VSTART_amd8131_800MHz, CMOS_VLEN_amd8131_800MHz, 0))
|
||||
// {
|
||||
// print_debug("AMD8131 allowed at 800MHz\r\n");
|
||||
// } else {
|
||||
// print_debug("AMD8131 allowed at 600Hz only\r\n");
|
||||
// }
|
||||
//#endif
|
||||
if (needs_reset) {
|
||||
print_info("HyperT reset -\r\n");
|
||||
soft_reset();
|
||||
}
|
||||
|
||||
enable_smbus();
|
||||
|
||||
memreset_setup();
|
||||
sdram_initialize(ARRAY_SIZE(cpu), cpu);
|
||||
|
||||
#if 0
|
||||
/* Check the first 1M */
|
||||
ram_check(0x00000000, 0x000100000);
|
||||
#endif
|
||||
}
|
||||
|
|
@ -1,267 +0,0 @@
|
|||
#define ASSEMBLY 1
|
||||
#define ASM_CONSOLE_LOGLEVEL 3
|
||||
#define __ROMCC__
|
||||
|
||||
#define RAMINIT_SYSINFO 0
|
||||
|
||||
#if CONFIG_LOGICAL_CPUS==1
|
||||
#define SET_NB_CFG_54 1
|
||||
#endif
|
||||
|
||||
//use by raminit
|
||||
#define QRANK_DIMM_SUPPORT 1
|
||||
|
||||
//used by incoherent_ht
|
||||
//#define K8_SCAN_PCI_BUS 1
|
||||
//#define K8_ALLOCATE_IO_RANGE 1
|
||||
|
||||
#include <stdint.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pnp_def.h>
|
||||
#include <arch/romcc_io.h>
|
||||
#include <cpu/x86/lapic.h>
|
||||
#include "option_table.h"
|
||||
#include "pc80/mc146818rtc_early.c"
|
||||
#include "pc80/serial.c"
|
||||
#include "arch/i386/lib/console.c"
|
||||
#include "ram/ramtest.c"
|
||||
|
||||
|
||||
#include <cpu/amd/model_fxx_rev.h>
|
||||
|
||||
#include "northbridge/amd/amdk8/incoherent_ht.c"
|
||||
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
|
||||
#include "northbridge/amd/amdk8/raminit.h"
|
||||
#include "cpu/amd/model_fxx/apic_timer.c"
|
||||
#include "lib/delay.c"
|
||||
|
||||
#if CONFIG_USE_INIT == 0
|
||||
#include "lib/memcpy.c"
|
||||
#endif
|
||||
|
||||
#include "cpu/x86/lapic/boot_cpu.c"
|
||||
#include "northbridge/amd/amdk8/reset_test.c"
|
||||
#include "northbridge/amd/amdk8/debug.c"
|
||||
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
|
||||
|
||||
#include "cpu/amd/mtrr/amd_earlymtrr.c"
|
||||
#include "cpu/x86/bist.h"
|
||||
|
||||
#include "northbridge/amd/amdk8/setup_resource_map.c"
|
||||
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
|
||||
|
||||
static void hard_reset(void)
|
||||
{
|
||||
set_bios_reset();
|
||||
pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
|
||||
//outb(0x0e, 0x0cf9);
|
||||
outb(0x06, 0x0cf9); /* this value will assert RESET_L and LDTRST_L */
|
||||
}
|
||||
|
||||
static void soft_reset(void)
|
||||
{
|
||||
set_bios_reset();
|
||||
pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
|
||||
//outb(0x0e, 0x0cf9);
|
||||
outb(0x06, 0x0cf9); /* this value will assert RESET_L and LDTRST_L */
|
||||
}
|
||||
|
||||
/*
|
||||
* GPIO28 of 8111 will control H0_MEMRESET_L
|
||||
* GPIO29 of 8111 will control H1_MEMRESET_L
|
||||
*/
|
||||
static void memreset_setup(void)
|
||||
{
|
||||
/* Ensure the CPU has controll of the memory lines */
|
||||
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0),
|
||||
SMBUS_IO_BASE + 0xc0 + 29);
|
||||
}
|
||||
|
||||
static void memreset(int controllers, const struct mem_controller *ctrl)
|
||||
{
|
||||
if (is_cpu_pre_c0()) {
|
||||
udelay(800);
|
||||
/* Set memreset_high */
|
||||
outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0),
|
||||
SMBUS_IO_BASE + 0xc0 + 28);
|
||||
udelay(90);
|
||||
}
|
||||
}
|
||||
|
||||
static inline void activate_spd_rom(const struct mem_controller *ctrl)
|
||||
{
|
||||
#define SMBUS_SWITCH1 0x71
|
||||
#define SMBUS_SWITCH2 0x73
|
||||
/* Switch 1: pca 9545, Switch 2: pca 9543 */
|
||||
unsigned device = (ctrl->channel0[0]) >> 8;
|
||||
/* Disable all outputs on SMBus switch 1 */
|
||||
smbus_send_byte(SMBUS_SWITCH1, 0x0);
|
||||
/* Select SMBus switch 2 Channel 0/1 */
|
||||
smbus_send_byte(SMBUS_SWITCH2, device);
|
||||
|
||||
}
|
||||
|
||||
static inline int spd_read_byte(unsigned device, unsigned address)
|
||||
{
|
||||
return smbus_read_byte(device, address);
|
||||
}
|
||||
|
||||
|
||||
#include "northbridge/amd/amdk8/raminit.c"
|
||||
#include "northbridge/amd/amdk8/coherent_ht.c"
|
||||
#include "sdram/generic_sdram.c"
|
||||
|
||||
/* tyan does not want the default */
|
||||
#include "resourcemap.c"
|
||||
|
||||
#include "cpu/amd/dualcore/dualcore.c"
|
||||
|
||||
#define CHAN0 0x100
|
||||
#define CHAN1 0x200
|
||||
|
||||
#include "cpu/amd/car/copy_and_run.c"
|
||||
#include "cpu/amd/car/post_cache_as_ram.c"
|
||||
|
||||
#include "cpu/amd/model_fxx/init_cpus.c"
|
||||
|
||||
#if USE_FALLBACK_IMAGE == 1
|
||||
|
||||
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
|
||||
#include "northbridge/amd/amdk8/early_ht.c"
|
||||
|
||||
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||
{
|
||||
|
||||
unsigned last_boot_normal_x = last_boot_normal();
|
||||
|
||||
/* Is this a cpu only reset? or Is this a secondary cpu? */
|
||||
if ((cpu_init_detectedx) || (!boot_cpu())) {
|
||||
if (last_boot_normal_x) {
|
||||
goto normal_image;
|
||||
} else {
|
||||
goto fallback_image;
|
||||
}
|
||||
}
|
||||
|
||||
/* Nothing special needs to be done to find bus 0 */
|
||||
/* Allow the HT devices to be found */
|
||||
|
||||
enumerate_ht_chain();
|
||||
|
||||
/* Setup the flash access */
|
||||
amd8111_enable_rom();
|
||||
|
||||
/* Is this a deliberate reset by the bios */
|
||||
if (bios_reset_detected() && last_boot_normal_x) {
|
||||
goto normal_image;
|
||||
}
|
||||
/* This is the primary cpu how should I boot? */
|
||||
else if (do_normal_boot()) {
|
||||
goto normal_image;
|
||||
}
|
||||
else {
|
||||
goto fallback_image;
|
||||
}
|
||||
normal_image:
|
||||
__asm__ volatile ("jmp __normal_image"
|
||||
: /* outputs */
|
||||
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
|
||||
);
|
||||
|
||||
fallback_image:
|
||||
;
|
||||
}
|
||||
#endif
|
||||
|
||||
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
|
||||
|
||||
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||
{
|
||||
|
||||
#if USE_FALLBACK_IMAGE == 1
|
||||
failover_process(bist, cpu_init_detectedx);
|
||||
#endif
|
||||
real_main(bist, cpu_init_detectedx);
|
||||
|
||||
}
|
||||
|
||||
|
||||
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||
{
|
||||
static const uint16_t spd_addr [] = {
|
||||
// node 0
|
||||
(0xa0>>1)|CHAN0, (0xa4>>1)|CHAN0, 0, 0,
|
||||
(0xa2>>1)|CHAN0, (0xa6>>1)|CHAN0, 0, 0,
|
||||
#if CONFIG_MAX_PHYSICAL_CPUS > 1
|
||||
// node 1
|
||||
(0xa8>>1)|CHAN0, (0xac>>1)|CHAN0, 0, 0,
|
||||
(0xaa>>1)|CHAN0, (0xae>>1)|CHAN0, 0, 0,
|
||||
#endif
|
||||
#if CONFIG_MAX_PHYSICAL_CPUS > 2
|
||||
// node 2
|
||||
(0xa8>>1)|CHAN1, (0xac>>1)|CHAN1, 0, 0,
|
||||
(0xaa>>1)|CHAN1, (0xae>>1)|CHAN1, 0, 0,
|
||||
// node 3
|
||||
(0xa0>>1)|CHAN1, (0xa4>>1)|CHAN1, 0, 0,
|
||||
(0xa2>>1)|CHAN1, (0xa6>>1)|CHAN1, 0, 0,
|
||||
#endif
|
||||
};
|
||||
|
||||
int needs_reset;
|
||||
unsigned bsp_apicid = 0;
|
||||
struct mem_controller ctrl[8];
|
||||
unsigned nodes;
|
||||
|
||||
if (bist == 0) {
|
||||
bsp_apicid = init_cpus(cpu_init_detectedx);
|
||||
}
|
||||
|
||||
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
|
||||
uart_init();
|
||||
console_init();
|
||||
|
||||
|
||||
/* Halt if there was a built in self test failure */
|
||||
report_bist_failure(bist);
|
||||
|
||||
setup_aruma_resource_map();
|
||||
|
||||
needs_reset = setup_coherent_ht_domain();
|
||||
|
||||
#if CONFIG_LOGICAL_CPUS==1
|
||||
/* here need to make sure last core0 is started, esp for two way system,
|
||||
* (there may be apic id conflicts in that case)
|
||||
*/
|
||||
wait_all_core0_started();
|
||||
start_other_cores();
|
||||
#endif
|
||||
|
||||
wait_all_aps_started(bsp_apicid);
|
||||
|
||||
needs_reset |= ht_setup_chains_x();
|
||||
|
||||
if (needs_reset) {
|
||||
print_info("ht reset -\r\n");
|
||||
soft_reset();
|
||||
}
|
||||
|
||||
allow_all_aps_stop(bsp_apicid);
|
||||
|
||||
nodes = get_nodes();
|
||||
//It's the time to set ctrl now;
|
||||
fill_mem_ctrl(nodes, ctrl, spd_addr);
|
||||
|
||||
enable_smbus();
|
||||
|
||||
memreset_setup();
|
||||
sdram_initialize(nodes, ctrl);
|
||||
|
||||
/* Reset SMBus switches to access the ADM1026 */
|
||||
smbus_send_byte(SMBUS_SWITCH1, 0x0);
|
||||
smbus_send_byte(SMBUS_SWITCH2, 0x0);
|
||||
|
||||
post_cache_as_ram();
|
||||
|
||||
}
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
extern struct chip_operations mainboard_agami_aruma_ops;
|
||||
|
||||
struct mainboard_agami_aruma_config {
|
||||
};
|
||||
|
|
@ -1,103 +0,0 @@
|
|||
entries
|
||||
|
||||
#start-bit length config config-ID name
|
||||
#0 8 r 0 seconds
|
||||
#8 8 r 0 alarm_seconds
|
||||
#16 8 r 0 minutes
|
||||
#24 8 r 0 alarm_minutes
|
||||
#32 8 r 0 hours
|
||||
#40 8 r 0 alarm_hours
|
||||
#48 8 r 0 day_of_week
|
||||
#56 8 r 0 day_of_month
|
||||
#64 8 r 0 month
|
||||
#72 8 r 0 year
|
||||
#80 4 r 0 rate_select
|
||||
#84 3 r 0 REF_Clock
|
||||
#87 1 r 0 UIP
|
||||
#88 1 r 0 auto_switch_DST
|
||||
#89 1 r 0 24_hour_mode
|
||||
#90 1 r 0 binary_values_enable
|
||||
#91 1 r 0 square-wave_out_enable
|
||||
#92 1 r 0 update_finished_enable
|
||||
#93 1 r 0 alarm_interrupt_enable
|
||||
#94 1 r 0 periodic_interrupt_enable
|
||||
#95 1 r 0 disable_clock_updates
|
||||
#96 288 r 0 temporary_filler
|
||||
0 384 r 0 reserved_memory
|
||||
384 1 e 4 boot_option
|
||||
385 1 e 4 last_boot
|
||||
386 1 e 1 ECC_memory
|
||||
388 4 r 0 reboot_bits
|
||||
392 3 e 5 baud_rate
|
||||
395 1 e 1 hw_scrubber
|
||||
396 1 e 1 interleave_chip_selects
|
||||
397 2 e 8 max_mem_clock
|
||||
399 1 e 2 dual_core
|
||||
400 1 e 1 power_on_after_fail
|
||||
412 4 e 6 debug_level
|
||||
416 4 e 7 boot_first
|
||||
420 4 e 7 boot_second
|
||||
424 4 e 7 boot_third
|
||||
428 4 h 0 boot_index
|
||||
432 8 h 0 boot_countdown
|
||||
440 4 e 9 slow_cpu
|
||||
444 1 e 1 nmi
|
||||
445 1 e 1 iommu
|
||||
728 256 h 0 user_data
|
||||
984 16 h 0 check_sum
|
||||
# Reserve the extended AMD configuration registers
|
||||
1000 24 r 0 reserved_memory
|
||||
|
||||
|
||||
|
||||
enumerations
|
||||
|
||||
#ID value text
|
||||
1 0 Disable
|
||||
1 1 Enable
|
||||
2 0 Enable
|
||||
2 1 Disable
|
||||
4 0 Fallback
|
||||
4 1 Normal
|
||||
5 0 115200
|
||||
5 1 57600
|
||||
5 2 38400
|
||||
5 3 19200
|
||||
5 4 9600
|
||||
5 5 4800
|
||||
5 6 2400
|
||||
5 7 1200
|
||||
6 1 Emergency
|
||||
6 2 Alert
|
||||
6 3 Critical
|
||||
6 4 Error
|
||||
6 5 Warning
|
||||
6 6 Notice
|
||||
6 7 Info
|
||||
6 8 Debug
|
||||
6 9 Spew
|
||||
7 0 Network
|
||||
7 1 HDD
|
||||
7 2 Floppy
|
||||
7 8 Fallback_Network
|
||||
7 9 Fallback_HDD
|
||||
7 10 Fallback_Floppy
|
||||
#7 3 ROM
|
||||
8 0 DDR400
|
||||
8 1 DDR333
|
||||
8 2 DDR266
|
||||
8 3 DDR200
|
||||
9 0 off
|
||||
9 1 87.5%
|
||||
9 2 75.0%
|
||||
9 3 62.5%
|
||||
9 4 50.0%
|
||||
9 5 37.5%
|
||||
9 6 25.0%
|
||||
9 7 12.5%
|
||||
|
||||
checksums
|
||||
|
||||
checksum 392 983 984
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,172 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
//AMD8111
|
||||
Name (APIC, Package (0x04)
|
||||
{
|
||||
Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10},// 0x0004ffff : assusme 8131 is present
|
||||
Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11},
|
||||
Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12},
|
||||
Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13}
|
||||
})
|
||||
|
||||
Name (PICM, Package (0x04)
|
||||
{
|
||||
Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI1.LNKA, 0x00},
|
||||
Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI1.LNKB, 0x00},
|
||||
Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI1.LNKC, 0x00},
|
||||
Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI1.LNKD, 0x00}
|
||||
})
|
||||
|
||||
Name (DNCG, Ones)
|
||||
|
||||
Method (_PRT, 0, NotSerialized)
|
||||
{
|
||||
If (LEqual (^DNCG, Ones)) {
|
||||
Store (DADD(\_SB.PCI0.SBDN, 0x0001ffff), Local0)
|
||||
// Update the Device Number according to SBDN
|
||||
Store(Local0, Index (DeRefOf (Index (PICM, 0)), 0))
|
||||
Store(Local0, Index (DeRefOf (Index (PICM, 1)), 0))
|
||||
Store(Local0, Index (DeRefOf (Index (PICM, 2)), 0))
|
||||
Store(Local0, Index (DeRefOf (Index (PICM, 3)), 0))
|
||||
|
||||
Store(Local0, Index (DeRefOf (Index (APIC, 0)), 0))
|
||||
Store(Local0, Index (DeRefOf (Index (APIC, 1)), 0))
|
||||
Store(Local0, Index (DeRefOf (Index (APIC, 2)), 0))
|
||||
Store(Local0, Index (DeRefOf (Index (APIC, 3)), 0))
|
||||
|
||||
Store (0x00, ^DNCG)
|
||||
|
||||
}
|
||||
|
||||
If (LNot (PICF)) {
|
||||
Return (PICM)
|
||||
}
|
||||
Else {
|
||||
Return (APIC)
|
||||
}
|
||||
}
|
||||
|
||||
Device (SBC3)
|
||||
{
|
||||
/* acpi smbus it should be 0x00040003 if 8131 present */
|
||||
Method (_ADR, 0, NotSerialized)
|
||||
{
|
||||
Return (DADD(\_SB.PCI0.SBDN, 0x00010003))
|
||||
}
|
||||
OperationRegion (PIRQ, PCI_Config, 0x56, 0x02)
|
||||
Field (PIRQ, ByteAcc, Lock, Preserve)
|
||||
{
|
||||
PIBA, 8,
|
||||
PIDC, 8
|
||||
}
|
||||
/*
|
||||
OperationRegion (TS3_, PCI_Config, 0xC4, 0x02)
|
||||
Field (TS3_, DWordAcc, NoLock, Preserve)
|
||||
{
|
||||
PTS3, 16
|
||||
}
|
||||
*/
|
||||
}
|
||||
|
||||
Device (HPET)
|
||||
{
|
||||
Name (HPT, 0x00)
|
||||
Name (_HID, EisaId ("PNP0103"))
|
||||
Name (_UID, 0x00)
|
||||
Method (_STA, 0, NotSerialized)
|
||||
{
|
||||
Return (0x0F)
|
||||
}
|
||||
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUF0, ResourceTemplate ()
|
||||
{
|
||||
Memory32Fixed (ReadWrite, 0xFED00000, 0x00000400)
|
||||
})
|
||||
Return (BUF0)
|
||||
}
|
||||
}
|
||||
|
||||
Include ("amd8111_pic.asl")
|
||||
|
||||
Include ("amd8111_isa.asl")
|
||||
|
||||
Device (TP2P)
|
||||
{
|
||||
/* 8111 P2P and it should 0x00030000 when 8131 present*/
|
||||
Method (_ADR, 0, NotSerialized)
|
||||
{
|
||||
Return (DADD(\_SB.PCI0.SBDN, 0x00000000))
|
||||
}
|
||||
|
||||
Method (_PRW, 0, NotSerialized)
|
||||
{
|
||||
If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x08, 0x03 }) }
|
||||
Else { Return (Package (0x02) { 0x08, 0x01 }) }
|
||||
}
|
||||
|
||||
Device (USB0)
|
||||
{
|
||||
Name (_ADR, 0x00000000)
|
||||
Method (_PRW, 0, NotSerialized)
|
||||
{
|
||||
If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) }
|
||||
Else { Return (Package (0x02) { 0x0F, 0x01 }) }
|
||||
}
|
||||
}
|
||||
|
||||
Device (USB1)
|
||||
{
|
||||
Name (_ADR, 0x00000001)
|
||||
Method (_PRW, 0, NotSerialized)
|
||||
{
|
||||
If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x0F, 0x03 }) }
|
||||
Else { Return (Package (0x02) { 0x0F, 0x01 }) }
|
||||
}
|
||||
}
|
||||
|
||||
Name (APIC, Package (0x0C)
|
||||
{
|
||||
Package (0x04) { 0x0000FFFF, 0x00, 0x00, 0x10 }, //USB
|
||||
Package (0x04) { 0x0000FFFF, 0x01, 0x00, 0x11 },
|
||||
Package (0x04) { 0x0000FFFF, 0x02, 0x00, 0x12 },
|
||||
Package (0x04) { 0x0000FFFF, 0x03, 0x00, 0x13 },
|
||||
|
||||
Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x10 }, //Slot 4
|
||||
Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x11 },
|
||||
Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x12 },
|
||||
Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x13 },
|
||||
|
||||
Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x11 }, //Slot 3
|
||||
Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x12 },
|
||||
Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x13 },
|
||||
Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x10 }
|
||||
})
|
||||
|
||||
Name (PICM, Package (0x0C)
|
||||
{
|
||||
Package (0x04) { 0x0000FFFF, 0x00, \_SB.PCI1.LNKA, 0x00 }, //USB
|
||||
Package (0x04) { 0x0000FFFF, 0x01, \_SB.PCI1.LNKB, 0x00 },
|
||||
Package (0x04) { 0x0000FFFF, 0x02, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0000FFFF, 0x03, \_SB.PCI1.LNKD, 0x00 },
|
||||
|
||||
Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI1.LNKA, 0x00 }, //Slot 4
|
||||
Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI1.LNKB, 0x00 },
|
||||
Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI1.LNKD, 0x00 },
|
||||
|
||||
Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI1.LNKB, 0x00 }, //Slot 3
|
||||
Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI1.LNKD, 0x00 },
|
||||
Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI1.LNKA, 0x00 }
|
||||
})
|
||||
|
||||
Method (_PRT, 0, NotSerialized)
|
||||
{
|
||||
If (LNot (PICF)) { Return (PICM) }
|
||||
Else { Return (APIC) }
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -1,176 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
//AMD8111 isa
|
||||
|
||||
Device (ISA)
|
||||
{
|
||||
/* lpc 0x00040000 */
|
||||
Method (_ADR, 0, NotSerialized)
|
||||
{
|
||||
Return (DADD(\_SB.PCI0.SBDN, 0x00010000))
|
||||
}
|
||||
|
||||
OperationRegion (PIRY, PCI_Config, 0x51, 0x02) // LPC Decode Registers
|
||||
Field (PIRY, ByteAcc, NoLock, Preserve)
|
||||
{
|
||||
Z000, 2, // Parallel Port Range
|
||||
, 1,
|
||||
ECP, 1, // ECP Enable
|
||||
FDC1, 1, // Floppy Drive Controller 1
|
||||
FDC2, 1, // Floppy Drive Controller 2
|
||||
Offset (0x01),
|
||||
Z001, 3, // Serial Port A Range
|
||||
SAEN, 1, // Serial Post A Enabled
|
||||
Z002, 3, // Serial Port B Range
|
||||
SBEN, 1 // Serial Post B Enabled
|
||||
}
|
||||
|
||||
Device (PIC)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0000"))
|
||||
Name (_CRS, ResourceTemplate ()
|
||||
{
|
||||
IO (Decode16, 0x0020, 0x0020, 0x01, 0x02)
|
||||
IO (Decode16, 0x00A0, 0x00A0, 0x01, 0x02)
|
||||
IRQ (Edge, ActiveHigh, Exclusive) {2}
|
||||
})
|
||||
}
|
||||
|
||||
Device (DMA1)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0200"))
|
||||
Name (_CRS, ResourceTemplate ()
|
||||
{
|
||||
IO (Decode16, 0x0000, 0x0000, 0x01, 0x10)
|
||||
IO (Decode16, 0x0080, 0x0080, 0x01, 0x10)
|
||||
IO (Decode16, 0x00C0, 0x00C0, 0x01, 0x20)
|
||||
DMA (Compatibility, NotBusMaster, Transfer16) {4}
|
||||
})
|
||||
}
|
||||
|
||||
Device (TMR)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0100"))
|
||||
Name (_CRS, ResourceTemplate ()
|
||||
{
|
||||
IO (Decode16, 0x0040, 0x0040, 0x01, 0x04)
|
||||
IRQ (Edge, ActiveHigh, Exclusive) {0}
|
||||
})
|
||||
}
|
||||
|
||||
Device (RTC)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0B00"))
|
||||
Name (_CRS, ResourceTemplate ()
|
||||
{
|
||||
IO (Decode16, 0x0070, 0x0070, 0x01, 0x06)
|
||||
IRQ (Edge, ActiveHigh, Exclusive) {8}
|
||||
})
|
||||
}
|
||||
|
||||
Device (SPKR)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0800"))
|
||||
Name (_CRS, ResourceTemplate ()
|
||||
{
|
||||
IO (Decode16, 0x0061, 0x0061, 0x01, 0x01)
|
||||
})
|
||||
}
|
||||
|
||||
Device (COPR)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0C04"))
|
||||
Name (_CRS, ResourceTemplate ()
|
||||
{
|
||||
IO (Decode16, 0x00F0, 0x00F0, 0x01, 0x10)
|
||||
IRQ (Edge, ActiveHigh, Exclusive) {13}
|
||||
})
|
||||
}
|
||||
|
||||
Device (SYSR)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0C02"))
|
||||
Name (_UID, 0x00)
|
||||
Name (SYR1, ResourceTemplate ()
|
||||
{
|
||||
IO (Decode16, 0x04D0, 0x04D0, 0x01, 0x02) //wrh092302 - added to report Thor NVRAM
|
||||
IO (Decode16, 0x1100, 0x117F, 0x01, 0x80) //wrh092302 - added to report Thor NVRAM
|
||||
IO (Decode16, 0x1180, 0x11FF, 0x01, 0x80)
|
||||
IO (Decode16, 0x0010, 0x0010, 0x01, 0x10)
|
||||
IO (Decode16, 0x0022, 0x0022, 0x01, 0x1E)
|
||||
IO (Decode16, 0x0044, 0x0044, 0x01, 0x1C)
|
||||
IO (Decode16, 0x0062, 0x0062, 0x01, 0x02)
|
||||
IO (Decode16, 0x0065, 0x0065, 0x01, 0x0B)
|
||||
IO (Decode16, 0x0076, 0x0076, 0x01, 0x0A)
|
||||
IO (Decode16, 0x0090, 0x0090, 0x01, 0x10)
|
||||
IO (Decode16, 0x00A2, 0x00A2, 0x01, 0x1E)
|
||||
IO (Decode16, 0x00E0, 0x00E0, 0x01, 0x10)
|
||||
IO (Decode16, 0x0B78, 0x0B78, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error
|
||||
IO (Decode16, 0x0190, 0x0190, 0x01, 0x04) // Added this to remove ACPI Unrepoted IO Error
|
||||
})
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Return (SYR1)
|
||||
}
|
||||
}
|
||||
|
||||
Device (MEM)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0C02"))
|
||||
Name (_UID, 0x01)
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUF0, ResourceTemplate ()
|
||||
{
|
||||
Memory32Fixed (ReadWrite, 0x000E0000, 0x00020000) // BIOS E4000-FFFFF
|
||||
Memory32Fixed (ReadWrite, 0x000C0000, 0x00000000) // video BIOS c0000-c8404
|
||||
Memory32Fixed (ReadWrite, 0xFEC00000, 0x00001000) // I/O APIC
|
||||
Memory32Fixed (ReadWrite, 0xFFC00000, 0x00380000) // LPC forwarded, 4 MB w/ROM
|
||||
Memory32Fixed (ReadWrite, 0xFEE00000, 0x00001000) // Local APIC
|
||||
Memory32Fixed (ReadWrite, 0xFFF80000, 0x00080000) // Overlay BIOS
|
||||
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
|
||||
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) // Overlay BIOS
|
||||
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS
|
||||
Memory32Fixed (ReadWrite, 0x00000000, 0x00000000) //Overlay BIOS
|
||||
})
|
||||
// Read the Video Memory length
|
||||
CreateDWordField (BUF0, 0x14, CLEN)
|
||||
CreateDWordField (BUF0, 0x10, CBAS)
|
||||
|
||||
ShiftLeft (VGA1, 0x09, Local0)
|
||||
Store (Local0, CLEN)
|
||||
|
||||
Return (BUF0)
|
||||
}
|
||||
}
|
||||
|
||||
Device (PS2M)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0F13"))
|
||||
Name (_CRS, ResourceTemplate ()
|
||||
{
|
||||
IRQNoFlags () {12}
|
||||
})
|
||||
Method (_STA, 0, NotSerialized)
|
||||
{
|
||||
And (FLG0, 0x04, Local0)
|
||||
If (LEqual (Local0, 0x04)) { Return (0x0F) }
|
||||
Else { Return (0x00) }
|
||||
}
|
||||
}
|
||||
|
||||
Device (PS2K)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0303"))
|
||||
Name (_CRS, ResourceTemplate ()
|
||||
{
|
||||
IO (Decode16, 0x0060, 0x0060, 0x01, 0x01)
|
||||
IO (Decode16, 0x0064, 0x0064, 0x01, 0x01)
|
||||
IRQNoFlags () {1}
|
||||
})
|
||||
}
|
||||
Include ("superio.asl")
|
||||
|
||||
}
|
||||
|
||||
|
|
@ -1,360 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
//AMD8111 pic LNKA B C D
|
||||
|
||||
Device (LNKA)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0C0F"))
|
||||
Name (_UID, 0x01)
|
||||
Method (_STA, 0, NotSerialized)
|
||||
{
|
||||
And (\_SB.PCI1.SBC3.PIBA, 0x0F, Local0)
|
||||
If (LEqual (Local0, 0x00)) { Return (0x09) } //Disabled
|
||||
Else { Return (0x0B) } //Enabled
|
||||
}
|
||||
|
||||
Method (_PRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUFA, ResourceTemplate ()
|
||||
{
|
||||
IRQ (Level, ActiveLow, Shared) {3,5,10,11}
|
||||
})
|
||||
Return (BUFA)
|
||||
}
|
||||
|
||||
Method (_DIS, 0, NotSerialized)
|
||||
{
|
||||
Store (0x01, Local3)
|
||||
And (\_SB.PCI1.SBC3.PIBA, 0x0F, Local1)
|
||||
Store (Local1, Local2)
|
||||
If (LGreater (Local1, 0x07))
|
||||
{
|
||||
Subtract (Local1, 0x08, Local1)
|
||||
}
|
||||
|
||||
ShiftLeft (Local3, Local1, Local3)
|
||||
Not (Local3, Local3)
|
||||
And (\_SB.PCI1.SBC3.PIBA, 0xF0, \_SB.PCI1.SBC3.PIBA)
|
||||
}
|
||||
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUFA, ResourceTemplate ()
|
||||
{
|
||||
IRQ (Level, ActiveLow, Shared) {}
|
||||
})
|
||||
CreateByteField (BUFA, 0x01, IRA1)
|
||||
CreateByteField (BUFA, 0x02, IRA2)
|
||||
Store (0x00, Local3)
|
||||
Store (0x00, Local4)
|
||||
And (\_SB.PCI1.SBC3.PIBA, 0x0F, Local1)
|
||||
If (LNot (LEqual (Local1, 0x00)))
|
||||
{ // Routing enable
|
||||
If (LGreater (Local1, 0x07))
|
||||
{
|
||||
Subtract (Local1, 0x08, Local2)
|
||||
ShiftLeft (One, Local2, Local4)
|
||||
}
|
||||
Else
|
||||
{
|
||||
If (LGreater (Local1, 0x00))
|
||||
{
|
||||
ShiftLeft (One, Local1, Local3)
|
||||
}
|
||||
}
|
||||
|
||||
Store (Local3, IRA1)
|
||||
Store (Local4, IRA2)
|
||||
}
|
||||
|
||||
Return (BUFA)
|
||||
}
|
||||
|
||||
Method (_SRS, 1, NotSerialized)
|
||||
{
|
||||
CreateByteField (Arg0, 0x01, IRA1)
|
||||
CreateByteField (Arg0, 0x02, IRA2)
|
||||
ShiftLeft (IRA2, 0x08, Local0)
|
||||
Or (Local0, IRA1, Local0)
|
||||
Store (0x00, Local1)
|
||||
ShiftRight (Local0, 0x01, Local0)
|
||||
While (LGreater (Local0, 0x00))
|
||||
{
|
||||
Increment (Local1)
|
||||
ShiftRight (Local0, 0x01, Local0)
|
||||
}
|
||||
|
||||
And (\_SB.PCI1.SBC3.PIBA, 0xF0, \_SB.PCI1.SBC3.PIBA)
|
||||
Or (\_SB.PCI1.SBC3.PIBA, Local1, \_SB.PCI1.SBC3.PIBA)
|
||||
}
|
||||
}
|
||||
|
||||
Device (LNKB)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0C0F"))
|
||||
Name (_UID, 0x02)
|
||||
Method (_STA, 0, NotSerialized)
|
||||
{
|
||||
And (\_SB.PCI1.SBC3.PIBA, 0xF0, Local0)
|
||||
If (LEqual (Local0, 0x00)) { Return (0x09) }
|
||||
Else { Return (0x0B) }
|
||||
}
|
||||
|
||||
Method (_PRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUFB, ResourceTemplate ()
|
||||
{
|
||||
IRQ (Level, ActiveLow, Shared) {3,5,10,11}
|
||||
})
|
||||
Return (BUFB)
|
||||
}
|
||||
|
||||
Method (_DIS, 0, NotSerialized)
|
||||
{
|
||||
Store (0x01, Local3)
|
||||
And (\_SB.PCI1.SBC3.PIBA, 0xF0, Local1)
|
||||
ShiftRight (Local1, 0x04, Local1)
|
||||
Store (Local1, Local2)
|
||||
If (LGreater (Local1, 0x07))
|
||||
{
|
||||
Subtract (Local1, 0x08, Local1)
|
||||
}
|
||||
|
||||
ShiftLeft (Local3, Local1, Local3)
|
||||
Not (Local3, Local3)
|
||||
And (\_SB.PCI1.SBC3.PIBA, 0x0F, \_SB.PCI1.SBC3.PIBA)
|
||||
}
|
||||
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUFB, ResourceTemplate ()
|
||||
{
|
||||
IRQ (Level, ActiveLow, Shared) {}
|
||||
})
|
||||
CreateByteField (BUFB, 0x01, IRB1)
|
||||
CreateByteField (BUFB, 0x02, IRB2)
|
||||
Store (0x00, Local3)
|
||||
Store (0x00, Local4)
|
||||
And (\_SB.PCI1.SBC3.PIBA, 0xF0, Local1)
|
||||
ShiftRight (Local1, 0x04, Local1)
|
||||
If (LNot (LEqual (Local1, 0x00)))
|
||||
{
|
||||
If (LGreater (Local1, 0x07))
|
||||
{
|
||||
Subtract (Local1, 0x08, Local2)
|
||||
ShiftLeft (One, Local2, Local4)
|
||||
}
|
||||
Else
|
||||
{
|
||||
If (LGreater (Local1, 0x00))
|
||||
{
|
||||
ShiftLeft (One, Local1, Local3)
|
||||
}
|
||||
}
|
||||
|
||||
Store (Local3, IRB1)
|
||||
Store (Local4, IRB2)
|
||||
}
|
||||
|
||||
Return (BUFB)
|
||||
}
|
||||
|
||||
Method (_SRS, 1, NotSerialized)
|
||||
{
|
||||
CreateByteField (Arg0, 0x01, IRB1)
|
||||
CreateByteField (Arg0, 0x02, IRB2)
|
||||
ShiftLeft (IRB2, 0x08, Local0)
|
||||
Or (Local0, IRB1, Local0)
|
||||
Store (0x00, Local1)
|
||||
ShiftRight (Local0, 0x01, Local0)
|
||||
While (LGreater (Local0, 0x00))
|
||||
{
|
||||
Increment (Local1)
|
||||
ShiftRight (Local0, 0x01, Local0)
|
||||
}
|
||||
|
||||
And (\_SB.PCI1.SBC3.PIBA, 0x0F, \_SB.PCI1.SBC3.PIBA)
|
||||
ShiftLeft (Local1, 0x04, Local1)
|
||||
Or (\_SB.PCI1.SBC3.PIBA, Local1, \_SB.PCI1.SBC3.PIBA)
|
||||
}
|
||||
}
|
||||
|
||||
Device (LNKC)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0C0F"))
|
||||
Name (_UID, 0x03)
|
||||
Method (_STA, 0, NotSerialized)
|
||||
{
|
||||
And (\_SB.PCI1.SBC3.PIDC, 0x0F, Local0)
|
||||
If (LEqual (Local0, 0x00)) { Return (0x09) }
|
||||
Else { Return (0x0B) }
|
||||
}
|
||||
|
||||
Method (_PRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUFA, ResourceTemplate ()
|
||||
{
|
||||
IRQ (Level, ActiveLow, Shared) {3,5,10,11}
|
||||
})
|
||||
Return (BUFA)
|
||||
}
|
||||
|
||||
Method (_DIS, 0, NotSerialized)
|
||||
{
|
||||
Store (0x01, Local3)
|
||||
And (\_SB.PCI1.SBC3.PIDC, 0x0F, Local1)
|
||||
Store (Local1, Local2)
|
||||
If (LGreater (Local1, 0x07))
|
||||
{
|
||||
Subtract (Local1, 0x08, Local1)
|
||||
}
|
||||
|
||||
ShiftLeft (Local3, Local1, Local3)
|
||||
Not (Local3, Local3)
|
||||
And (\_SB.PCI1.SBC3.PIDC, 0xF0, \_SB.PCI1.SBC3.PIDC)
|
||||
}
|
||||
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUFA, ResourceTemplate ()
|
||||
{
|
||||
IRQ (Level, ActiveLow, Shared) {}
|
||||
})
|
||||
CreateByteField (BUFA, 0x01, IRA1)
|
||||
CreateByteField (BUFA, 0x02, IRA2)
|
||||
Store (0x00, Local3)
|
||||
Store (0x00, Local4)
|
||||
And (\_SB.PCI1.SBC3.PIDC, 0x0F, Local1)
|
||||
If (LNot (LEqual (Local1, 0x00)))
|
||||
{
|
||||
If (LGreater (Local1, 0x07))
|
||||
{
|
||||
Subtract (Local1, 0x08, Local2)
|
||||
ShiftLeft (One, Local2, Local4)
|
||||
}
|
||||
Else
|
||||
{
|
||||
If (LGreater (Local1, 0x00))
|
||||
{
|
||||
ShiftLeft (One, Local1, Local3)
|
||||
}
|
||||
}
|
||||
|
||||
Store (Local3, IRA1)
|
||||
Store (Local4, IRA2)
|
||||
}
|
||||
|
||||
Return (BUFA)
|
||||
}
|
||||
|
||||
Method (_SRS, 1, NotSerialized)
|
||||
{
|
||||
CreateByteField (Arg0, 0x01, IRA1)
|
||||
CreateByteField (Arg0, 0x02, IRA2)
|
||||
ShiftLeft (IRA2, 0x08, Local0)
|
||||
Or (Local0, IRA1, Local0)
|
||||
Store (0x00, Local1)
|
||||
ShiftRight (Local0, 0x01, Local0)
|
||||
While (LGreater (Local0, 0x00))
|
||||
{
|
||||
Increment (Local1)
|
||||
ShiftRight (Local0, 0x01, Local0)
|
||||
}
|
||||
|
||||
And (\_SB.PCI1.SBC3.PIDC, 0xF0, \_SB.PCI1.SBC3.PIDC)
|
||||
Or (\_SB.PCI1.SBC3.PIDC, Local1, \_SB.PCI1.SBC3.PIDC)
|
||||
}
|
||||
}
|
||||
|
||||
Device (LNKD)
|
||||
{
|
||||
Name (_HID, EisaId ("PNP0C0F"))
|
||||
Name (_UID, 0x04)
|
||||
Method (_STA, 0, NotSerialized)
|
||||
{
|
||||
And (\_SB.PCI1.SBC3.PIDC, 0xF0, Local0)
|
||||
If (LEqual (Local0, 0x00)) { Return (0x09) }
|
||||
Else { Return (0x0B) }
|
||||
}
|
||||
|
||||
Method (_PRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUFB, ResourceTemplate ()
|
||||
{
|
||||
IRQ (Level, ActiveLow, Shared) {3,5,10,11}
|
||||
})
|
||||
Return (BUFB)
|
||||
}
|
||||
|
||||
Method (_DIS, 0, NotSerialized)
|
||||
{
|
||||
Store (0x01, Local3)
|
||||
And (\_SB.PCI1.SBC3.PIDC, 0xF0, Local1)
|
||||
ShiftRight (Local1, 0x04, Local1)
|
||||
Store (Local1, Local2)
|
||||
If (LGreater (Local1, 0x07))
|
||||
{
|
||||
Subtract (Local1, 0x08, Local1)
|
||||
}
|
||||
|
||||
ShiftLeft (Local3, Local1, Local3)
|
||||
Not (Local3, Local3)
|
||||
And (\_SB.PCI1.SBC3.PIDC, 0x0F, \_SB.PCI1.SBC3.PIDC)
|
||||
}
|
||||
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUFB, ResourceTemplate ()
|
||||
{
|
||||
IRQ (Level, ActiveLow, Shared) {}
|
||||
})
|
||||
CreateByteField (BUFB, 0x01, IRB1)
|
||||
CreateByteField (BUFB, 0x02, IRB2)
|
||||
Store (0x00, Local3)
|
||||
Store (0x00, Local4)
|
||||
And (\_SB.PCI1.SBC3.PIDC, 0xF0, Local1)
|
||||
ShiftRight (Local1, 0x04, Local1)
|
||||
If (LNot (LEqual (Local1, 0x00)))
|
||||
{
|
||||
If (LGreater (Local1, 0x07))
|
||||
{
|
||||
Subtract (Local1, 0x08, Local2)
|
||||
ShiftLeft (One, Local2, Local4)
|
||||
}
|
||||
Else
|
||||
{
|
||||
If (LGreater (Local1, 0x00))
|
||||
{
|
||||
ShiftLeft (One, Local1, Local3)
|
||||
}
|
||||
}
|
||||
|
||||
Store (Local3, IRB1)
|
||||
Store (Local4, IRB2)
|
||||
}
|
||||
|
||||
Return (BUFB)
|
||||
}
|
||||
|
||||
Method (_SRS, 1, NotSerialized)
|
||||
{
|
||||
CreateByteField (Arg0, 0x01, IRB1)
|
||||
CreateByteField (Arg0, 0x02, IRB2)
|
||||
ShiftLeft (IRB2, 0x08, Local0)
|
||||
Or (Local0, IRB1, Local0)
|
||||
Store (0x00, Local1)
|
||||
ShiftRight (Local0, 0x01, Local0)
|
||||
While (LGreater (Local0, 0x00))
|
||||
{
|
||||
Increment (Local1)
|
||||
ShiftRight (Local0, 0x01, Local0)
|
||||
}
|
||||
|
||||
And (\_SB.PCI1.SBC3.PIDC, 0x0F, \_SB.PCI1.SBC3.PIDC)
|
||||
ShiftLeft (Local1, 0x04, Local1)
|
||||
Or (\_SB.PCI1.SBC3.PIDC, Local1, \_SB.PCI1.SBC3.PIDC)
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -1,119 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
|
||||
Device (PG0A)
|
||||
{
|
||||
/* 8132 pcix bridge*/
|
||||
Method (_ADR, 0, NotSerialized)
|
||||
{
|
||||
Return (DADD(GHCD(HCIN, 0), 0x00000000))
|
||||
}
|
||||
|
||||
Method (_PRW, 0, NotSerialized)
|
||||
{
|
||||
If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
|
||||
Else { Return (Package (0x02) { 0x29, 0x01 }) }
|
||||
}
|
||||
|
||||
Name (APIC, Package (0x14)
|
||||
{
|
||||
// Slot A - PIRQ BCDA
|
||||
Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 2
|
||||
Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A },
|
||||
Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B },
|
||||
Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 },
|
||||
|
||||
//Cypress Slot A - PIRQ BCDA
|
||||
Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x19 }, //?
|
||||
Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1A },
|
||||
Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x1B },
|
||||
Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x18 },
|
||||
|
||||
//Cypress Slot B - PIRQ CDAB
|
||||
Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x1A }, //?
|
||||
Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x1B },
|
||||
Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x18 },
|
||||
Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x19 },
|
||||
|
||||
//Cypress Slot C - PIRQ DABC
|
||||
Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x1B }, //?
|
||||
Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x18 },
|
||||
Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x19 },
|
||||
Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x1A },
|
||||
|
||||
//Cypress Slot D - PIRQ ABCD
|
||||
Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x18 }, //?
|
||||
Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x19 },
|
||||
Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x1A },
|
||||
Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x1B }
|
||||
})
|
||||
Name (PICM, Package (0x14)
|
||||
{
|
||||
Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI1.LNKB, 0x00 },//Slot 2
|
||||
Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI1.LNKD, 0x00 },
|
||||
Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI1.LNKA, 0x00 },
|
||||
|
||||
Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI1.LNKB, 0x00 },
|
||||
Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI1.LNKD, 0x00 },
|
||||
Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI1.LNKA, 0x00 },
|
||||
|
||||
Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI1.LNKD, 0x00 },
|
||||
Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI1.LNKA, 0x00 },
|
||||
Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI1.LNKB, 0x00 },
|
||||
|
||||
Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI1.LNKD, 0x00 },
|
||||
Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI1.LNKA, 0x00 },
|
||||
Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI1.LNKB, 0x00 },
|
||||
Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI1.LNKC, 0x00 },
|
||||
|
||||
Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI1.LNKA, 0x00 },
|
||||
Package (0x04) { 0x0006FFFF, 0x01, \_SB.PCI1.LNKB, 0x00 },
|
||||
Package (0x04) { 0x0006FFFF, 0x02, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0006FFFF, 0x03, \_SB.PCI1.LNKD, 0x00 }
|
||||
})
|
||||
Method (_PRT, 0, NotSerialized)
|
||||
{
|
||||
If (LNot (PICF)) { Return (PICM) }
|
||||
Else { Return (APIC) }
|
||||
}
|
||||
}
|
||||
|
||||
Device (PG0B)
|
||||
{
|
||||
/* 8132 pcix bridge*/
|
||||
Method (_ADR, 0, NotSerialized)
|
||||
{
|
||||
Return (DADD(GHCD(HCIN, 0), 0x00010000))
|
||||
}
|
||||
|
||||
Method (_PRW, 0, NotSerialized)
|
||||
{
|
||||
If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) }
|
||||
Else { Return (Package (0x02) { 0x22, 0x01 }) }
|
||||
}
|
||||
|
||||
Name (APIC, Package (0x04)
|
||||
{
|
||||
// Slot A - PIRQ ABCD
|
||||
Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1F },// Slot 1
|
||||
Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x20 },
|
||||
Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x21 },
|
||||
Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x22 }
|
||||
})
|
||||
Name (PICM, Package (0x04)
|
||||
{
|
||||
Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI1.LNKA, 0x00 },//Slot 1
|
||||
Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI1.LNKB, 0x00 },
|
||||
Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI1.LNKD, 0x00 }
|
||||
})
|
||||
Method (_PRT, 0, NotSerialized)
|
||||
{
|
||||
If (LNot (PICF)) { Return (PICM) }
|
||||
Else { Return (APIC) }
|
||||
}
|
||||
}
|
||||
|
|
@ -1,119 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
|
||||
Device (PG1A)
|
||||
{
|
||||
/* 8132 pcix bridge*/
|
||||
Method (_ADR, 0, NotSerialized)
|
||||
{
|
||||
Return (DADD(GHCD(HCIN, 1), 0x00000000))
|
||||
}
|
||||
|
||||
Method (_PRW, 0, NotSerialized)
|
||||
{
|
||||
If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x29, 0x03 }) }
|
||||
Else { Return (Package (0x02) { 0x29, 0x01 }) }
|
||||
}
|
||||
|
||||
Name (APIC, Package (0x14)
|
||||
{
|
||||
// Slot A - PIRQ BCDA
|
||||
Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x19 }, //Slot 2
|
||||
Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x1A },
|
||||
Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x1B },
|
||||
Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x18 },
|
||||
|
||||
//Cypress Slot A - PIRQ BCDA
|
||||
Package (0x04) { 0x0003FFFF, 0x00, 0x00, 0x19 }, //?
|
||||
Package (0x04) { 0x0003FFFF, 0x01, 0x00, 0x1A },
|
||||
Package (0x04) { 0x0003FFFF, 0x02, 0x00, 0x1B },
|
||||
Package (0x04) { 0x0003FFFF, 0x03, 0x00, 0x18 },
|
||||
|
||||
//Cypress Slot B - PIRQ CDAB
|
||||
Package (0x04) { 0x0004FFFF, 0x00, 0x00, 0x1A }, //?
|
||||
Package (0x04) { 0x0004FFFF, 0x01, 0x00, 0x1B },
|
||||
Package (0x04) { 0x0004FFFF, 0x02, 0x00, 0x18 },
|
||||
Package (0x04) { 0x0004FFFF, 0x03, 0x00, 0x19 },
|
||||
|
||||
//Cypress Slot C - PIRQ DABC
|
||||
Package (0x04) { 0x0005FFFF, 0x00, 0x00, 0x1B }, //?
|
||||
Package (0x04) { 0x0005FFFF, 0x01, 0x00, 0x18 },
|
||||
Package (0x04) { 0x0005FFFF, 0x02, 0x00, 0x19 },
|
||||
Package (0x04) { 0x0005FFFF, 0x03, 0x00, 0x1A },
|
||||
|
||||
//Cypress Slot D - PIRQ ABCD
|
||||
Package (0x04) { 0x0006FFFF, 0x00, 0x00, 0x18 }, //?
|
||||
Package (0x04) { 0x0006FFFF, 0x01, 0x00, 0x19 },
|
||||
Package (0x04) { 0x0006FFFF, 0x02, 0x00, 0x1A },
|
||||
Package (0x04) { 0x0006FFFF, 0x03, 0x00, 0x1B }
|
||||
})
|
||||
Name (PICM, Package (0x14)
|
||||
{
|
||||
Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI1.LNKB, 0x00 },//Slot 2
|
||||
Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI1.LNKD, 0x00 },
|
||||
Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI1.LNKA, 0x00 },
|
||||
|
||||
Package (0x04) { 0x0003FFFF, 0x00, \_SB.PCI1.LNKB, 0x00 },
|
||||
Package (0x04) { 0x0003FFFF, 0x01, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0003FFFF, 0x02, \_SB.PCI1.LNKD, 0x00 },
|
||||
Package (0x04) { 0x0003FFFF, 0x03, \_SB.PCI1.LNKA, 0x00 },
|
||||
|
||||
Package (0x04) { 0x0004FFFF, 0x00, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0004FFFF, 0x01, \_SB.PCI1.LNKD, 0x00 },
|
||||
Package (0x04) { 0x0004FFFF, 0x02, \_SB.PCI1.LNKA, 0x00 },
|
||||
Package (0x04) { 0x0004FFFF, 0x03, \_SB.PCI1.LNKB, 0x00 },
|
||||
|
||||
Package (0x04) { 0x0005FFFF, 0x00, \_SB.PCI1.LNKD, 0x00 },
|
||||
Package (0x04) { 0x0005FFFF, 0x01, \_SB.PCI1.LNKA, 0x00 },
|
||||
Package (0x04) { 0x0005FFFF, 0x02, \_SB.PCI1.LNKB, 0x00 },
|
||||
Package (0x04) { 0x0005FFFF, 0x03, \_SB.PCI1.LNKC, 0x00 },
|
||||
|
||||
Package (0x04) { 0x0006FFFF, 0x00, \_SB.PCI1.LNKA, 0x00 },
|
||||
Package (0x04) { 0x0006FFFF, 0x01, \_SB.PCI1.LNKB, 0x00 },
|
||||
Package (0x04) { 0x0006FFFF, 0x02, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0006FFFF, 0x03, \_SB.PCI1.LNKD, 0x00 }
|
||||
})
|
||||
Method (_PRT, 0, NotSerialized)
|
||||
{
|
||||
If (LNot (PICF)) { Return (PICM) }
|
||||
Else { Return (APIC) }
|
||||
}
|
||||
}
|
||||
|
||||
Device (PG1B)
|
||||
{
|
||||
/* 8132 pcix bridge*/
|
||||
Method (_ADR, 0, NotSerialized)
|
||||
{
|
||||
Return (DADD(GHCD(HCIN, 1), 0x00010000))
|
||||
}
|
||||
|
||||
Method (_PRW, 0, NotSerialized)
|
||||
{
|
||||
If (CondRefOf (\_S3, Local0)) { Return (Package (0x02) { 0x22, 0x03 }) }
|
||||
Else { Return (Package (0x02) { 0x22, 0x01 }) }
|
||||
}
|
||||
|
||||
Name (APIC, Package (0x04)
|
||||
{
|
||||
// Slot A - PIRQ ABCD
|
||||
Package (0x04) { 0x0001FFFF, 0x00, 0x00, 0x1F },// Slot 1
|
||||
Package (0x04) { 0x0001FFFF, 0x01, 0x00, 0x20 },
|
||||
Package (0x04) { 0x0001FFFF, 0x02, 0x00, 0x21 },
|
||||
Package (0x04) { 0x0001FFFF, 0x03, 0x00, 0x22 }
|
||||
})
|
||||
Name (PICM, Package (0x04)
|
||||
{
|
||||
Package (0x04) { 0x0001FFFF, 0x00, \_SB.PCI1.LNKA, 0x00 },//Slot 1
|
||||
Package (0x04) { 0x0001FFFF, 0x01, \_SB.PCI1.LNKB, 0x00 },
|
||||
Package (0x04) { 0x0001FFFF, 0x02, \_SB.PCI1.LNKC, 0x00 },
|
||||
Package (0x04) { 0x0001FFFF, 0x03, \_SB.PCI1.LNKD, 0x00 }
|
||||
})
|
||||
Method (_PRT, 0, NotSerialized)
|
||||
{
|
||||
If (LNot (PICF)) { Return (PICM) }
|
||||
Else { Return (APIC) }
|
||||
}
|
||||
}
|
||||
|
|
@ -1,315 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
|
||||
//AMD k8 util for BUSB and res range
|
||||
|
||||
Scope (\_SB)
|
||||
{
|
||||
|
||||
Name (OSTB, Ones)
|
||||
Method (OSTP, 0, NotSerialized)
|
||||
{
|
||||
If (LEqual (^OSTB, Ones))
|
||||
{
|
||||
Store (0x00, ^OSTB)
|
||||
}
|
||||
|
||||
Return (^OSTB)
|
||||
}
|
||||
|
||||
Method (SEQL, 2, Serialized)
|
||||
{
|
||||
Store (SizeOf (Arg0), Local0)
|
||||
Store (SizeOf (Arg1), Local1)
|
||||
If (LNot (LEqual (Local0, Local1))) { Return (Zero) }
|
||||
|
||||
Name (BUF0, Buffer (Local0) {})
|
||||
Store (Arg0, BUF0)
|
||||
Name (BUF1, Buffer (Local0) {})
|
||||
Store (Arg1, BUF1)
|
||||
Store (Zero, Local2)
|
||||
While (LLess (Local2, Local0))
|
||||
{
|
||||
Store (DerefOf (Index (BUF0, Local2)), Local3)
|
||||
Store (DerefOf (Index (BUF1, Local2)), Local4)
|
||||
If (LNot (LEqual (Local3, Local4))) { Return (Zero) }
|
||||
|
||||
Increment (Local2)
|
||||
}
|
||||
|
||||
Return (One)
|
||||
}
|
||||
|
||||
|
||||
Method (DADD, 2, NotSerialized)
|
||||
{
|
||||
Store( Arg1, Local0)
|
||||
Store( Arg0, Local1)
|
||||
Add( ShiftLeft(Local1,16), Local0, Local0)
|
||||
Return (Local0)
|
||||
}
|
||||
|
||||
|
||||
Method (GHCE, 1, NotSerialized) // check if the HC enabled
|
||||
{
|
||||
Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1)
|
||||
if(LEqual ( And(Local1, 0x01), 0x01)) { Return (0x0F) }
|
||||
Else { Return (0x00) }
|
||||
}
|
||||
|
||||
Method (GHCN, 1, NotSerialized) // get the node num for the HC
|
||||
{
|
||||
Store (0x00, Local0)
|
||||
Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1)
|
||||
Store (ShiftRight( And (Local1, 0xf0), 0x04), Local0)
|
||||
Return (Local0)
|
||||
}
|
||||
|
||||
Method (GHCL, 1, NotSerialized) // get the link num on node for the HC
|
||||
{
|
||||
Store (0x00, Local0)
|
||||
Store (DerefOf (Index (\_SB.PCI0.HCLK, Arg0)), Local1)
|
||||
Store (ShiftRight( And (Local1, 0xf00), 0x08), Local0)
|
||||
Return (Local0)
|
||||
}
|
||||
|
||||
Method (GHCD, 2, NotSerialized) // get the unit id base for the HT device in HC
|
||||
{
|
||||
Store (0x00, Local0)
|
||||
Store (DerefOf (Index (\_SB.PCI0.HCDN, Arg0)), Local1)
|
||||
Store (Arg1, Local2) // Arg1 could be 3, 2, 1, 0
|
||||
Multiply (Local2, 0x08, Local2) // change to 24, 16, 8, 0
|
||||
Store (And (ShiftRight( Local1, Local2), 0xff), Local0)
|
||||
Return (Local0)
|
||||
}
|
||||
|
||||
Method (GBUS, 2, NotSerialized)
|
||||
{
|
||||
Store (0x00, Local0)
|
||||
While (LLess (Local0, 0x04))
|
||||
{
|
||||
Store (DerefOf (Index (\_SB.PCI0.BUSN, Local0)), Local1)
|
||||
If (LEqual (And (Local1, 0x03), 0x03))
|
||||
{
|
||||
If (LEqual (Arg0, ShiftRight (And (Local1, 0x70), 0x04)))
|
||||
{
|
||||
If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0300), 0x08))))
|
||||
{
|
||||
Return (ShiftRight (And (Local1, 0x00FF0000), 0x10))
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
Increment (Local0)
|
||||
}
|
||||
|
||||
Return (0x00)
|
||||
}
|
||||
|
||||
Method (GWBN, 2, NotSerialized)
|
||||
{
|
||||
Name (BUF0, ResourceTemplate ()
|
||||
{
|
||||
WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode,
|
||||
0x0000, // Address Space Granularity
|
||||
0x0000, // Address Range Minimum
|
||||
0x0000, // Address Range Maximum
|
||||
0x0000, // Address Translation Offset
|
||||
0x0000,,,)
|
||||
})
|
||||
CreateWordField (BUF0, 0x08, BMIN)
|
||||
CreateWordField (BUF0, 0x0A, BMAX)
|
||||
CreateWordField (BUF0, 0x0E, BLEN)
|
||||
Store (0x00, Local0)
|
||||
While (LLess (Local0, 0x04))
|
||||
{
|
||||
Store (DerefOf (Index (\_SB.PCI0.BUSN, Local0)), Local1)
|
||||
If (LEqual (And (Local1, 0x03), 0x03))
|
||||
{
|
||||
If (LEqual (Arg0, ShiftRight (And (Local1, 0x70), 0x04)))
|
||||
{
|
||||
If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local1, 0x0300), 0x08))))
|
||||
{
|
||||
Store (ShiftRight (And (Local1, 0x00FF0000), 0x10), BMIN)
|
||||
Store (ShiftRight (Local1, 0x18), BMAX)
|
||||
Subtract (BMAX, BMIN, BLEN)
|
||||
Increment (BLEN)
|
||||
Return (RTAG (BUF0))
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
Increment (Local0)
|
||||
}
|
||||
|
||||
Return (RTAG (BUF0))
|
||||
}
|
||||
|
||||
Method (GMEM, 2, NotSerialized)
|
||||
{
|
||||
Name (BUF0, ResourceTemplate ()
|
||||
{
|
||||
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, NonCacheable, ReadWrite,
|
||||
0x00000000, // Address Space Granularity
|
||||
0x00000000, // Address Range Minimum
|
||||
0x00000000, // Address Range Maximum
|
||||
0x00000000, // Address Translation Offset
|
||||
0x00000000,,,
|
||||
, AddressRangeMemory, TypeStatic)
|
||||
})
|
||||
CreateDWordField (BUF0, 0x0A, MMIN)
|
||||
CreateDWordField (BUF0, 0x0E, MMAX)
|
||||
CreateDWordField (BUF0, 0x16, MLEN)
|
||||
Store (0x00, Local0)
|
||||
Store (0x00, Local4)
|
||||
Store (0x00, Local3)
|
||||
While (LLess (Local0, 0x10))
|
||||
{
|
||||
Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local1)
|
||||
Increment (Local0)
|
||||
Store (DerefOf (Index (\_SB.PCI0.MMIO, Local0)), Local2)
|
||||
If (LEqual (And (Local1, 0x03), 0x03))
|
||||
{
|
||||
If (LEqual (Arg0, And (Local2, 0x07)))
|
||||
{
|
||||
If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04))))
|
||||
{
|
||||
Store (ShiftLeft (And (Local1, 0xFFFFFF00), 0x08), MMIN)
|
||||
Store (ShiftLeft (And (Local2, 0xFFFFFF00), 0x08), MMAX)
|
||||
Or (MMAX, 0xFFFF, MMAX)
|
||||
Subtract (MMAX, MMIN, MLEN)
|
||||
|
||||
If (Local4)
|
||||
{
|
||||
Concatenate (RTAG (BUF0), Local3, Local5)
|
||||
Store (Local5, Local3)
|
||||
}
|
||||
Else
|
||||
{
|
||||
If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, \_SB.PCI0.SBLK)))
|
||||
{
|
||||
Store (\_SB.PCI0.TOM1, MMIN)
|
||||
Subtract (MMAX, MMIN, MLEN)
|
||||
Increment (MLEN)
|
||||
}
|
||||
|
||||
Store (RTAG (BUF0), Local3)
|
||||
}
|
||||
|
||||
Increment (Local4)
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
Increment (Local0)
|
||||
}
|
||||
|
||||
If (LNot (Local4))
|
||||
{
|
||||
Store (BUF0, Local3)
|
||||
}
|
||||
|
||||
Return (Local3)
|
||||
}
|
||||
|
||||
Method (GIOR, 2, NotSerialized)
|
||||
{
|
||||
Name (BUF0, ResourceTemplate ()
|
||||
{
|
||||
DWordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
|
||||
0x00000000, // Address Space Granularity
|
||||
0x00000000, // Address Range Minimum
|
||||
0x00000000, // Address Range Maximum
|
||||
0x00000000, // Address Translation Offset
|
||||
0x00000000,,,
|
||||
, TypeStatic)
|
||||
})
|
||||
CreateDWordField (BUF0, 0x0A, PMIN)
|
||||
CreateDWordField (BUF0, 0x0E, PMAX)
|
||||
CreateDWordField (BUF0, 0x16, PLEN)
|
||||
Store (0x00, Local0)
|
||||
Store (0x00, Local4)
|
||||
Store (0x00, Local3)
|
||||
While (LLess (Local0, 0x08))
|
||||
{
|
||||
Store (DerefOf (Index (\_SB.PCI0.PCIO, Local0)), Local1)
|
||||
Increment (Local0)
|
||||
Store (DerefOf (Index (\_SB.PCI0.PCIO, Local0)), Local2)
|
||||
If (LEqual (And (Local1, 0x03), 0x03))
|
||||
{
|
||||
If (LEqual (Arg0, And (Local2, 0x07)))
|
||||
{
|
||||
If (LOr (LEqual (Arg1, 0xFF), LEqual (Arg1, ShiftRight (And (Local2, 0x30), 0x04))))
|
||||
{
|
||||
Store (And (Local1, 0x01FFF000), PMIN)
|
||||
Store (And (Local2, 0x01FFF000), PMAX)
|
||||
Or (PMAX, 0x0FFF, PMAX)
|
||||
Subtract (PMAX, PMIN, PLEN)
|
||||
Increment (PLEN)
|
||||
|
||||
If (Local4)
|
||||
{
|
||||
Concatenate (RTAG (BUF0), Local3, Local5)
|
||||
Store (Local5, Local3)
|
||||
}
|
||||
Else
|
||||
{
|
||||
If (LGreater (PMAX, PMIN))
|
||||
{
|
||||
If (LOr (LAnd (LEqual (Arg1, 0xFF), LEqual (Arg0, 0x00)), LEqual (Arg1, \_SB.PCI0.SBLK)))
|
||||
{
|
||||
Store (0x0D00, PMIN)
|
||||
Subtract (PMAX, PMIN, PLEN)
|
||||
Increment (PLEN)
|
||||
}
|
||||
|
||||
Store (RTAG (BUF0), Local3)
|
||||
Increment (Local4)
|
||||
}
|
||||
|
||||
If (And (Local1, 0x10))
|
||||
{
|
||||
Store (0x03B0, PMIN)
|
||||
Store (0x03DF, PMAX)
|
||||
Store (0x30, PLEN)
|
||||
If (Local4)
|
||||
{
|
||||
Concatenate (RTAG (BUF0), Local3, Local5)
|
||||
Store (Local5, Local3)
|
||||
}
|
||||
Else
|
||||
{
|
||||
Store (RTAG (BUF0), Local3)
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
Increment (Local4)
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
Increment (Local0)
|
||||
}
|
||||
|
||||
If (LNot (Local4))
|
||||
{
|
||||
Store (RTAG (BUF0), Local3)
|
||||
}
|
||||
|
||||
Return (Local3)
|
||||
}
|
||||
|
||||
Method (RTAG, 1, NotSerialized)
|
||||
{
|
||||
Store (Arg0, Local0)
|
||||
Store (SizeOf (Local0), Local1)
|
||||
Subtract (Local1, 0x02, Local1)
|
||||
Multiply (Local1, 0x08, Local1)
|
||||
CreateField (Local0, 0x00, Local1, RETB)
|
||||
Store (RETB, Local2)
|
||||
Return (Local2)
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -1,235 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
DefinitionBlock ("DSDT.aml", "DSDT", 1, "AMD-K8", "AMDACPI", 100925440)
|
||||
{
|
||||
Scope (_PR)
|
||||
{
|
||||
Processor (CPU0, 0x00, 0x0000C010, 0x06) {}
|
||||
Processor (CPU1, 0x01, 0x00000000, 0x00) {}
|
||||
Processor (CPU2, 0x02, 0x00000000, 0x00) {}
|
||||
Processor (CPU3, 0x03, 0x00000000, 0x00) {}
|
||||
|
||||
}
|
||||
|
||||
Method (FWSO, 0, NotSerialized) { }
|
||||
|
||||
Name (_S0, Package (0x04) { 0x00, 0x00, 0x00, 0x00 })
|
||||
Name (_S1, Package (0x04) { 0x01, 0x01, 0x01, 0x01 })
|
||||
Name (_S3, Package (0x04) { 0x05, 0x05, 0x05, 0x05 })
|
||||
Name (_S5, Package (0x04) { 0x07, 0x07, 0x07, 0x07 })
|
||||
|
||||
Scope (_SB)
|
||||
{
|
||||
Device (PCI0)
|
||||
{
|
||||
/* BUS0 root bus */
|
||||
|
||||
/*
|
||||
//hardcode begin
|
||||
Name (BUSN, Package (0x04) { 0x04010003, 0x06050013, 0x00000000, 0x00000000 })
|
||||
Name (MMIO, Package (0x10) { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
|
||||
0x00f43003, 0x00f44f01, 0x0000d003, 0x00efff01, 0x00f40003, 0x00f42f00, 0x00f45003, 0x00f44f00 })
|
||||
Name (PCIO, Package (0x08) { 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00001003, 0x00001000, 0x00002003, 0x00002001 })
|
||||
Name (SBLK, 0x00)
|
||||
Name (TOM1, 0x40000000)
|
||||
|
||||
// for AMD opteron we could have four chains, so we will have PCI1, PCI2, PCI3, PCI4
|
||||
// PCI1 must be SBLK Chain
|
||||
// If you have HT IO card that is connected to PCI2, PCI3, PCI4, then you man put Device in SSDT2, SSDT3, SSDT4,
|
||||
// in acpi_tables.c you can link those SSDT to RSDT according to it's presence.
|
||||
// Otherwise put the PCI2, PCI3, PCI4 in this dsdt
|
||||
Name (HCLK, Package (0x04) { 0x00000001, 0x00000011, 0x00000000, 0x00000000 }) //[0,3]=1 enable [4,7]=node_id, [8,15]=linkn
|
||||
|
||||
Name (SBDN, 3) // 8111 UnitID Base
|
||||
//hardcode end
|
||||
*/
|
||||
External (BUSN)
|
||||
External (MMIO)
|
||||
External (PCIO)
|
||||
External (SBLK)
|
||||
External (TOM1)
|
||||
External (HCLK)
|
||||
External (SBDN)
|
||||
External (HCDN)
|
||||
|
||||
Name (_HID, EisaId ("PNP0A03"))
|
||||
Name (_ADR, 0x00180000)
|
||||
Name (_UID, 0x01)
|
||||
Name (_BBN, 0)
|
||||
|
||||
|
||||
// define L1IC Link1 on node0 init completed, so node1 is installed
|
||||
// We must make sure our bus is 0 ?
|
||||
OperationRegion (LDT1, PCI_Config, 0xA4, 0x01)
|
||||
Field (LDT1, ByteAcc, Lock, Preserve)
|
||||
{
|
||||
, 5,
|
||||
L1IC, 1
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
Device (PCI1)
|
||||
{
|
||||
Name (HCIN, 0x00) // HC1
|
||||
// BUS 1 first HT Chain
|
||||
Name (_HID, EisaId ("PNP0A03"))
|
||||
Name (_ADR, 0x00180000) // Fake
|
||||
Name (_UID, 0x02)
|
||||
Method (_BBN, 0, NotSerialized)
|
||||
{
|
||||
Return (GBUS (0x00, \_SB.PCI0.SBLK))
|
||||
}
|
||||
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUF0, ResourceTemplate ()
|
||||
{
|
||||
IO (Decode16, 0x0CF8, 0x0CF8, 0x01, 0x08) //CF8-CFFh
|
||||
IO (Decode16, 0xC000, 0xC000, 0x01, 0x80) //8000h
|
||||
IO (Decode16, 0xC080, 0xC080, 0x01, 0x80) //8080h
|
||||
|
||||
WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
|
||||
0x0000, // Address Space Granularity
|
||||
0x8100, // Address Range Minimum
|
||||
0xFFFF, // Address Range Maximum
|
||||
0x0000, // Address Translation Offset
|
||||
0x7F00,,,
|
||||
, TypeStatic) //8100h-FFFFh
|
||||
|
||||
DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
|
||||
0x00000000, // Address Space Granularity
|
||||
0x000C0000, // Address Range Minimum
|
||||
0x00000000, // Address Range Maximum
|
||||
0x00000000, // Address Translation Offset
|
||||
0x00000000,,,
|
||||
, AddressRangeMemory, TypeStatic) //Video BIOS A0000h-C7FFFh
|
||||
|
||||
Memory32Fixed (ReadWrite, 0x000D8000, 0x00004000)//USB HC D8000-DBFFF
|
||||
|
||||
WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
|
||||
0x0000, // Address Space Granularity
|
||||
0x0000, // Address Range Minimum
|
||||
0x03AF, // Address Range Maximum
|
||||
0x0000, // Address Translation Offset
|
||||
0x03B0,,,
|
||||
, TypeStatic) //0-CF7h
|
||||
|
||||
WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange,
|
||||
0x0000, // Address Space Granularity
|
||||
0x03E0, // Address Range Minimum
|
||||
0x0CF7, // Address Range Maximum
|
||||
0x0000, // Address Translation Offset
|
||||
0x0918,,,
|
||||
, TypeStatic) //0-CF7h
|
||||
})
|
||||
\_SB.OSTP ()
|
||||
CreateDWordField (BUF0, 0x3E, VLEN)
|
||||
CreateDWordField (BUF0, 0x36, VMAX)
|
||||
CreateDWordField (BUF0, 0x32, VMIN)
|
||||
ShiftLeft (VGA1, 0x09, Local0)
|
||||
Add (VMIN, Local0, VMAX)
|
||||
Decrement (VMAX)
|
||||
Store (Local0, VLEN)
|
||||
Concatenate (\_SB.GMEM (0x00, \_SB.PCI0.SBLK), BUF0, Local1)
|
||||
Concatenate (\_SB.GIOR (0x00, \_SB.PCI0.SBLK), Local1, Local2)
|
||||
Concatenate (\_SB.GWBN (0x00, \_SB.PCI0.SBLK), Local2, Local3)
|
||||
Return (Local3)
|
||||
}
|
||||
|
||||
Include ("pci1_hc.asl")
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
Scope (_GPE)
|
||||
{
|
||||
Method (_L08, 0, NotSerialized)
|
||||
{
|
||||
Notify (\_SB.PCI1, 0x02) //PME# Wakeup
|
||||
}
|
||||
|
||||
Method (_L0F, 0, NotSerialized)
|
||||
{
|
||||
Notify (\_SB.PCI1.TP2P.USB0, 0x02) //USB Wakeup
|
||||
}
|
||||
|
||||
Method (_L22, 0, NotSerialized) // GPIO18 (LID) - Pogo 0 Bridge B
|
||||
{
|
||||
Notify (\_SB.PCI1.PG0B, 0x02)
|
||||
}
|
||||
|
||||
Method (_L29, 0, NotSerialized) // GPIO25 (Suspend) - Pogo 0 Bridge A
|
||||
{
|
||||
Notify (\_SB.PCI1.PG0A, 0x02)
|
||||
}
|
||||
}
|
||||
|
||||
Method (_PTS, 1, NotSerialized)
|
||||
{
|
||||
Or (Arg0, 0xF0, Local0)
|
||||
Store (Local0, DBG1)
|
||||
}
|
||||
/*
|
||||
Method (_WAK, 1, NotSerialized)
|
||||
{
|
||||
Or (Arg0, 0xE0, Local0)
|
||||
Store (Local0, DBG1)
|
||||
}
|
||||
*/
|
||||
Name (PICF, 0x00) //Flag Variable for PIC vs. I/O APIC Mode
|
||||
Method (_PIC, 1, NotSerialized) //PIC Flag and Interface Method
|
||||
{
|
||||
Store (Arg0, PICF)
|
||||
}
|
||||
|
||||
OperationRegion (DEBG, SystemIO, 0x80, 0x01)
|
||||
Field (DEBG, ByteAcc, Lock, Preserve)
|
||||
{
|
||||
DBG1, 8
|
||||
}
|
||||
|
||||
OperationRegion (EXTM, SystemMemory, 0x000FF83C, 0x04)
|
||||
Field (EXTM, WordAcc, Lock, Preserve)
|
||||
{
|
||||
AMEM, 32
|
||||
}
|
||||
|
||||
OperationRegion (VGAM, SystemMemory, 0x000C0002, 0x01)
|
||||
Field (VGAM, ByteAcc, Lock, Preserve)
|
||||
{
|
||||
VGA1, 8
|
||||
}
|
||||
|
||||
OperationRegion (GRAM, SystemMemory, 0x0400, 0x0100)
|
||||
Field (GRAM, ByteAcc, Lock, Preserve)
|
||||
{
|
||||
Offset (0x10),
|
||||
FLG0, 8
|
||||
}
|
||||
|
||||
OperationRegion (GSTS, SystemIO, 0xC028, 0x02)
|
||||
Field (GSTS, ByteAcc, NoLock, Preserve)
|
||||
{
|
||||
, 4,
|
||||
IRQR, 1
|
||||
}
|
||||
|
||||
OperationRegion (Z007, SystemIO, 0x21, 0x01)
|
||||
Field (Z007, ByteAcc, NoLock, Preserve)
|
||||
{
|
||||
Z008, 8
|
||||
}
|
||||
|
||||
OperationRegion (Z009, SystemIO, 0xA1, 0x01)
|
||||
Field (Z009, ByteAcc, NoLock, Preserve)
|
||||
{
|
||||
Z00A, 8
|
||||
}
|
||||
|
||||
Include ("amdk8_util.asl")
|
||||
|
||||
}
|
||||
|
||||
|
|
@ -1,2 +0,0 @@
|
|||
Include ("amd8111.asl") //real SB at first
|
||||
Include ("amd8131.asl")
|
||||
|
|
@ -1,69 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
DefinitionBlock ("SSDT2.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440)
|
||||
{
|
||||
Scope (_SB)
|
||||
{
|
||||
External (DADD, MethodObj)
|
||||
External (GHCE, MethodObj)
|
||||
External (GHCN, MethodObj)
|
||||
External (GHCL, MethodObj)
|
||||
External (GHCD, MethodObj)
|
||||
External (GNUS, MethodObj)
|
||||
External (GIOR, MethodObj)
|
||||
External (GMEM, MethodObj)
|
||||
External (GWBN, MethodObj)
|
||||
External (GBUS, MethodObj)
|
||||
|
||||
External (PICF)
|
||||
|
||||
External (\_SB.PCI1.LNKA, DeviceObj)
|
||||
External (\_SB.PCI1.LNKB, DeviceObj)
|
||||
External (\_SB.PCI1.LNKC, DeviceObj)
|
||||
External (\_SB.PCI1.LNKD, DeviceObj)
|
||||
|
||||
|
||||
Device (PCI2)
|
||||
{
|
||||
|
||||
// BUS ? Second HT Chain
|
||||
Name (HCIN, 0x01) // HC2
|
||||
|
||||
Name (_HID, "PNP0A03")
|
||||
|
||||
Method (_ADR, 0, NotSerialized) //Fake bus should be 0
|
||||
{
|
||||
Return (DADD(GHCN(HCIN), 0x00180000))
|
||||
}
|
||||
|
||||
Name (_UID, 0x03)
|
||||
|
||||
Method (_BBN, 0, NotSerialized)
|
||||
{
|
||||
Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
|
||||
}
|
||||
|
||||
Method (_STA, 0, NotSerialized)
|
||||
{
|
||||
Return (\_SB.GHCE(HCIN))
|
||||
}
|
||||
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUF0, ResourceTemplate () { })
|
||||
Store( GHCN(HCIN), Local4)
|
||||
Store( GHCL(HCIN), Local5)
|
||||
|
||||
Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1)
|
||||
Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2)
|
||||
Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3)
|
||||
Return (Local3)
|
||||
}
|
||||
|
||||
Include ("pci2_hc.asl")
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
|
|
@ -1,3 +0,0 @@
|
|||
Include ("amd8131.asl")
|
||||
|
||||
Include ("amd8131_1.asl")
|
||||
|
|
@ -1,69 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
DefinitionBlock ("SSDT3.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440)
|
||||
{
|
||||
Scope (_SB)
|
||||
{
|
||||
External (DADD, MethodObj)
|
||||
External (GHCE, MethodObj)
|
||||
External (GHCN, MethodObj)
|
||||
External (GHCL, MethodObj)
|
||||
External (GHCD, MethodObj)
|
||||
External (GNUS, MethodObj)
|
||||
External (GIOR, MethodObj)
|
||||
External (GMEM, MethodObj)
|
||||
External (GWBN, MethodObj)
|
||||
External (GBUS, MethodObj)
|
||||
|
||||
External (PICF)
|
||||
|
||||
External (\_SB.PCI1.LNKA, DeviceObj)
|
||||
External (\_SB.PCI1.LNKB, DeviceObj)
|
||||
External (\_SB.PCI1.LNKC, DeviceObj)
|
||||
External (\_SB.PCI1.LNKD, DeviceObj)
|
||||
|
||||
|
||||
Device (PCI3)
|
||||
{
|
||||
|
||||
// BUS ? Second HT Chain
|
||||
Name (HCIN, 0x02) // HC3
|
||||
|
||||
Name (_HID, "PNP0A03")
|
||||
|
||||
Method (_ADR, 0, NotSerialized) //Fake bus should be 0
|
||||
{
|
||||
Return (DADD(GHCN(HCIN), 0x00180000))
|
||||
}
|
||||
|
||||
Name (_UID, 0x04)
|
||||
|
||||
Method (_BBN, 0, NotSerialized)
|
||||
{
|
||||
Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
|
||||
}
|
||||
|
||||
Method (_STA, 0, NotSerialized)
|
||||
{
|
||||
Return (\_SB.GHCE(HCIN))
|
||||
}
|
||||
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUF0, ResourceTemplate () { })
|
||||
Store( GHCN(HCIN), Local4)
|
||||
Store( GHCL(HCIN), Local5)
|
||||
|
||||
Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1)
|
||||
Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2)
|
||||
Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3)
|
||||
Return (Local3)
|
||||
}
|
||||
|
||||
Include ("pci2_hc.asl")
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
|
|
@ -1,69 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
DefinitionBlock ("SSDT4.aml", "SSDT", 1, "AMD-K8", "AMDACPI", 100925440)
|
||||
{
|
||||
Scope (_SB)
|
||||
{
|
||||
External (DADD, MethodObj)
|
||||
External (GHCE, MethodObj)
|
||||
External (GHCN, MethodObj)
|
||||
External (GHCL, MethodObj)
|
||||
External (GHCD, MethodObj)
|
||||
External (GNUS, MethodObj)
|
||||
External (GIOR, MethodObj)
|
||||
External (GMEM, MethodObj)
|
||||
External (GWBN, MethodObj)
|
||||
External (GBUS, MethodObj)
|
||||
|
||||
External (PICF)
|
||||
|
||||
External (\_SB.PCI1.LNKA, DeviceObj)
|
||||
External (\_SB.PCI1.LNKB, DeviceObj)
|
||||
External (\_SB.PCI1.LNKC, DeviceObj)
|
||||
External (\_SB.PCI1.LNKD, DeviceObj)
|
||||
|
||||
|
||||
Device (PCI4)
|
||||
{
|
||||
|
||||
// BUS ? Second HT Chain
|
||||
Name (HCIN, 0x03) // HC4
|
||||
|
||||
Name (_HID, "PNP0A03")
|
||||
|
||||
Method (_ADR, 0, NotSerialized) //Fake bus should be 0
|
||||
{
|
||||
Return (DADD(GHCN(HCIN), 0x00180000))
|
||||
}
|
||||
|
||||
Name (_UID, 0x05)
|
||||
|
||||
Method (_BBN, 0, NotSerialized)
|
||||
{
|
||||
Return (GBUS (GHCN(HCIN), GHCL(HCIN)))
|
||||
}
|
||||
|
||||
Method (_STA, 0, NotSerialized)
|
||||
{
|
||||
Return (\_SB.GHCE(HCIN))
|
||||
}
|
||||
|
||||
Method (_CRS, 0, NotSerialized)
|
||||
{
|
||||
Name (BUF0, ResourceTemplate () { })
|
||||
Store( GHCN(HCIN), Local4)
|
||||
Store( GHCL(HCIN), Local5)
|
||||
|
||||
Concatenate (\_SB.GIOR (Local4, Local5), BUF0, Local1)
|
||||
Concatenate (\_SB.GMEM (Local4, Local5), Local1, Local2)
|
||||
Concatenate (\_SB.GWBN (Local4, Local5), Local2, Local3)
|
||||
Return (Local3)
|
||||
}
|
||||
|
||||
Include ("pci2_hc.asl")
|
||||
}
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
|
|
@ -1 +0,0 @@
|
|||
// Include ("w83627hf.asl")
|
||||
|
|
@ -1,151 +0,0 @@
|
|||
/*
|
||||
* ACPI - create the Fixed ACPI Description Tables (FADT)
|
||||
* (C) Copyright 2005 Stefan Reinauer <stepan@openbios.org>
|
||||
*/
|
||||
|
||||
#include <string.h>
|
||||
#include <console/console.h>
|
||||
#include <arch/acpi.h>
|
||||
|
||||
extern unsigned pm_base; /* pm_base should be set in sb acpi */
|
||||
|
||||
void acpi_create_fadt(acpi_fadt_t * fadt, acpi_facs_t * facs, void *dsdt)
|
||||
{
|
||||
|
||||
acpi_header_t *header = &(fadt->header);
|
||||
|
||||
printk_debug("pm_base: 0x%04x\n", pm_base);
|
||||
|
||||
/* Prepare the header */
|
||||
memset((void *) fadt, 0, sizeof(acpi_fadt_t));
|
||||
memcpy(header->signature, "FACP", 4);
|
||||
header->length = 244;
|
||||
header->revision = 1;
|
||||
memcpy(header->oem_id, OEM_ID, 6);
|
||||
memcpy(header->oem_table_id, "COREBOOT", 8);
|
||||
memcpy(header->asl_compiler_id, ASLC, 4);
|
||||
header->asl_compiler_revision = 0;
|
||||
|
||||
fadt->firmware_ctrl = (u32) facs;
|
||||
fadt->dsdt = (u32) dsdt;
|
||||
|
||||
// 3=Workstation,4=Enterprise Server, 7=Performance Server
|
||||
fadt->preferred_pm_profile = 0x03;
|
||||
fadt->sci_int = 9;
|
||||
// disable system management mode by setting to 0:
|
||||
fadt->smi_cmd = 0; //pm_base+0x2f;
|
||||
fadt->acpi_enable = 0xf0;
|
||||
fadt->acpi_disable = 0xf1;
|
||||
fadt->s4bios_req = 0x0;
|
||||
fadt->pstate_cnt = 0xe2;
|
||||
|
||||
fadt->pm1a_evt_blk = pm_base;
|
||||
fadt->pm1b_evt_blk = 0x0000;
|
||||
fadt->pm1a_cnt_blk = pm_base + 0x04;
|
||||
fadt->pm1b_cnt_blk = 0x0000;
|
||||
fadt->pm2_cnt_blk = 0x0000;
|
||||
fadt->pm_tmr_blk = pm_base + 0x08;
|
||||
fadt->gpe0_blk = pm_base + 0x20;
|
||||
fadt->gpe1_blk = pm_base + 0xb0;
|
||||
|
||||
fadt->pm1_evt_len = 4;
|
||||
fadt->pm1_cnt_len = 2;
|
||||
fadt->pm2_cnt_len = 0;
|
||||
fadt->pm_tmr_len = 4;
|
||||
fadt->gpe0_blk_len = 4;
|
||||
fadt->gpe1_blk_len = 8;
|
||||
fadt->gpe1_base = 16;
|
||||
|
||||
fadt->cst_cnt = 0xe3;
|
||||
fadt->p_lvl2_lat = 101;
|
||||
fadt->p_lvl3_lat = 1001;
|
||||
fadt->flush_size = 0;
|
||||
fadt->flush_stride = 0;
|
||||
fadt->duty_offset = 1;
|
||||
fadt->duty_width = 3;
|
||||
fadt->day_alrm = 0; // 0x7d these have to be
|
||||
fadt->mon_alrm = 0; // 0x7e added to cmos.layout
|
||||
fadt->century = 0; // 0x7f to make rtc alrm work
|
||||
fadt->iapc_boot_arch = 0x3; // See table 5-11
|
||||
fadt->flags = 0x25;
|
||||
|
||||
fadt->res2 = 0;
|
||||
|
||||
fadt->reset_reg.space_id = 1;
|
||||
fadt->reset_reg.bit_width = 8;
|
||||
fadt->reset_reg.bit_offset = 0;
|
||||
fadt->reset_reg.resv = 0;
|
||||
fadt->reset_reg.addrl = 0xcf9;
|
||||
fadt->reset_reg.addrh = 0x0;
|
||||
|
||||
fadt->reset_value = 6;
|
||||
fadt->x_firmware_ctl_l = (u32) facs;
|
||||
fadt->x_firmware_ctl_h = 0;
|
||||
fadt->x_dsdt_l = (u32) dsdt;
|
||||
fadt->x_dsdt_h = 0;
|
||||
|
||||
fadt->x_pm1a_evt_blk.space_id = 1;
|
||||
fadt->x_pm1a_evt_blk.bit_width = 32;
|
||||
fadt->x_pm1a_evt_blk.bit_offset = 0;
|
||||
fadt->x_pm1a_evt_blk.resv = 0;
|
||||
fadt->x_pm1a_evt_blk.addrl = pm_base;
|
||||
fadt->x_pm1a_evt_blk.addrh = 0x0;
|
||||
|
||||
fadt->x_pm1b_evt_blk.space_id = 1;
|
||||
fadt->x_pm1b_evt_blk.bit_width = 4;
|
||||
fadt->x_pm1b_evt_blk.bit_offset = 0;
|
||||
fadt->x_pm1b_evt_blk.resv = 0;
|
||||
fadt->x_pm1b_evt_blk.addrl = 0x0;
|
||||
fadt->x_pm1b_evt_blk.addrh = 0x0;
|
||||
|
||||
|
||||
fadt->x_pm1a_cnt_blk.space_id = 1;
|
||||
fadt->x_pm1a_cnt_blk.bit_width = 16;
|
||||
fadt->x_pm1a_cnt_blk.bit_offset = 0;
|
||||
fadt->x_pm1a_cnt_blk.resv = 0;
|
||||
fadt->x_pm1a_cnt_blk.addrl = pm_base + 4;
|
||||
fadt->x_pm1a_cnt_blk.addrh = 0x0;
|
||||
|
||||
fadt->x_pm1b_cnt_blk.space_id = 1;
|
||||
fadt->x_pm1b_cnt_blk.bit_width = 2;
|
||||
fadt->x_pm1b_cnt_blk.bit_offset = 0;
|
||||
fadt->x_pm1b_cnt_blk.resv = 0;
|
||||
fadt->x_pm1b_cnt_blk.addrl = 0x0;
|
||||
fadt->x_pm1b_cnt_blk.addrh = 0x0;
|
||||
|
||||
|
||||
fadt->x_pm2_cnt_blk.space_id = 1;
|
||||
fadt->x_pm2_cnt_blk.bit_width = 0;
|
||||
fadt->x_pm2_cnt_blk.bit_offset = 0;
|
||||
fadt->x_pm2_cnt_blk.resv = 0;
|
||||
fadt->x_pm2_cnt_blk.addrl = 0x0;
|
||||
fadt->x_pm2_cnt_blk.addrh = 0x0;
|
||||
|
||||
|
||||
fadt->x_pm_tmr_blk.space_id = 1;
|
||||
fadt->x_pm_tmr_blk.bit_width = 32;
|
||||
fadt->x_pm_tmr_blk.bit_offset = 0;
|
||||
fadt->x_pm_tmr_blk.resv = 0;
|
||||
fadt->x_pm_tmr_blk.addrl = pm_base + 0x08;
|
||||
fadt->x_pm_tmr_blk.addrh = 0x0;
|
||||
|
||||
|
||||
fadt->x_gpe0_blk.space_id = 1;
|
||||
fadt->x_gpe0_blk.bit_width = 32;
|
||||
fadt->x_gpe0_blk.bit_offset = 0;
|
||||
fadt->x_gpe0_blk.resv = 0;
|
||||
fadt->x_gpe0_blk.addrl = pm_base + 0x20;
|
||||
fadt->x_gpe0_blk.addrh = 0x0;
|
||||
|
||||
|
||||
fadt->x_gpe1_blk.space_id = 1;
|
||||
fadt->x_gpe1_blk.bit_width = 64;
|
||||
fadt->x_gpe1_blk.bit_offset = 16;
|
||||
fadt->x_gpe1_blk.resv = 0;
|
||||
fadt->x_gpe1_blk.addrl = pm_base + 0xb0;
|
||||
fadt->x_gpe1_blk.addrh = 0x0;
|
||||
|
||||
header->checksum =
|
||||
acpi_checksum((void *) fadt, sizeof(acpi_fadt_t));
|
||||
|
||||
}
|
||||
|
|
@ -1,66 +0,0 @@
|
|||
#define ASSEMBLY 1
|
||||
#include <stdint.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <arch/io.h>
|
||||
#include <arch/romcc_io.h>
|
||||
#include <cpu/x86/lapic.h>
|
||||
#include "pc80/mc146818rtc_early.c"
|
||||
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
|
||||
#include "northbridge/amd/amdk8/early_ht.c"
|
||||
#include "cpu/x86/lapic/boot_cpu.c"
|
||||
#include "cpu/x86/mtrr/earlymtrr.c"
|
||||
#include "northbridge/amd/amdk8/reset_test.c"
|
||||
|
||||
static unsigned long main(unsigned long bist)
|
||||
{
|
||||
unsigned nodeid;
|
||||
/* Make cerain my local apic is useable */
|
||||
enable_lapic();
|
||||
|
||||
nodeid=lapicid();
|
||||
/* Is this a cpu only reset? */
|
||||
if (early_mtrr_init_detected()) {
|
||||
if (last_boot_normal()) {
|
||||
goto normal_image;
|
||||
} else {
|
||||
goto fallback_image;
|
||||
}
|
||||
}
|
||||
/* Is this a secondary cpu? */
|
||||
if (!boot_cpu()) {
|
||||
if (last_boot_normal()) {
|
||||
goto normal_image;
|
||||
} else {
|
||||
goto fallback_image;
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* Nothing special needs to be done to find bus 0 */
|
||||
/* Allow the HT devices to be found */
|
||||
enumerate_ht_chain();
|
||||
|
||||
/* Setup the 8111 */
|
||||
amd8111_enable_rom();
|
||||
|
||||
/* Is this a deliberate reset by the bios */
|
||||
if (bios_reset_detected() && last_boot_normal()) {
|
||||
goto normal_image;
|
||||
}
|
||||
/* This is the primary cpu how should I boot? */
|
||||
else if (do_normal_boot()) {
|
||||
goto normal_image;
|
||||
}
|
||||
else {
|
||||
goto fallback_image;
|
||||
}
|
||||
normal_image:
|
||||
asm volatile ("jmp __normal_image"
|
||||
: /* outputs */
|
||||
: "a" (bist) /* inputs */
|
||||
: /* clobbers */
|
||||
);
|
||||
fallback_image:
|
||||
return bist;
|
||||
}
|
||||
|
|
@ -1,164 +0,0 @@
|
|||
#include <console/console.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <string.h>
|
||||
#include <stdint.h>
|
||||
#include <stdlib.h>
|
||||
#if CONFIG_LOGICAL_CPUS==1
|
||||
#include <cpu/amd/dualcore.h>
|
||||
#endif
|
||||
|
||||
|
||||
// Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables
|
||||
//busnum is default
|
||||
unsigned char bus_isa = 7;
|
||||
unsigned char bus_8111_0 = 1;
|
||||
unsigned char bus_8111_1 = 4;
|
||||
unsigned char bus_8131[7][3]; // another 6 8131
|
||||
unsigned apicid_8111;
|
||||
unsigned apicid_8131[7][2];
|
||||
|
||||
unsigned sblk;
|
||||
unsigned pci1234[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not
|
||||
//You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail
|
||||
0x0000ff0,
|
||||
0x0000f10,
|
||||
0x0000f20,
|
||||
0x0000f30,
|
||||
// 0x0000ff0,
|
||||
// 0x0000ff0,
|
||||
// 0x0000ff0,
|
||||
// 0x0000ff0
|
||||
};
|
||||
unsigned hc_possible_num;
|
||||
unsigned sbdn;
|
||||
unsigned hcdn[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most
|
||||
0x20202020,
|
||||
0x20202020,
|
||||
0x20202020,
|
||||
0x20202020,
|
||||
// 0x20202020,
|
||||
// 0x20202020,
|
||||
// 0x20202020,
|
||||
// 0x20202020,
|
||||
};
|
||||
|
||||
unsigned sbdnx[7]; // for all 8131
|
||||
|
||||
extern void get_sblk_pci1234(void);
|
||||
|
||||
static unsigned get_bus_conf_done = 0;
|
||||
|
||||
void get_bus_conf(void)
|
||||
{
|
||||
|
||||
unsigned apicid_base;
|
||||
|
||||
device_t dev;
|
||||
|
||||
int i;
|
||||
|
||||
if (get_bus_conf_done == 1)
|
||||
return; //do it only once
|
||||
|
||||
get_bus_conf_done = 1;
|
||||
|
||||
hc_possible_num = ARRAY_SIZE(pci1234);
|
||||
|
||||
get_sblk_pci1234();
|
||||
|
||||
|
||||
sbdn = ((hcdn[0] >> 8) & 0xff); // first byte of first chain
|
||||
sbdnx[0] = (hcdn[0] & 0xff);
|
||||
|
||||
for (i = 0; i < hc_possible_num; i++) {
|
||||
sbdnx[i * 2 + 1] = hcdn[i] & 0xff;
|
||||
sbdnx[i * 2 + 2] = (hcdn[i] >> 8) & 0xff;
|
||||
}
|
||||
|
||||
bus_8131[0][0] = (pci1234[0] >> 16) & 0xff;
|
||||
bus_8111_0 = bus_8131[0][0];
|
||||
|
||||
/* 8111 */
|
||||
dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sbdn, 0));
|
||||
if (dev) {
|
||||
bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
|
||||
bus_isa++;
|
||||
// printk_debug("bus_isa=%d\n",bus_isa);
|
||||
} else {
|
||||
printk_debug
|
||||
("ERROR - could not find PCI %02x:03.0, using defaults\n",
|
||||
bus_8111_0);
|
||||
}
|
||||
|
||||
|
||||
/* 8131-1 */
|
||||
bus_8131[0][0] = 1;
|
||||
dev = dev_find_slot(bus_8131[0][0], PCI_DEVFN(sbdnx[1], 0));
|
||||
if (dev) {
|
||||
bus_8131[0][1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
} else {
|
||||
printk_debug
|
||||
("ERROR - could not find PCI %02x:01.0, using defaults\n",
|
||||
bus_8131[0][0]);
|
||||
}
|
||||
|
||||
|
||||
/* 8132-2 */
|
||||
dev = dev_find_slot(bus_8131[0][0], PCI_DEVFN(sbdnx[1] + 1, 0));
|
||||
if (dev) {
|
||||
bus_8131[0][2] = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
|
||||
bus_isa++;
|
||||
} else {
|
||||
printk_debug
|
||||
("ERROR - could not find PCI %02x:02.0, using defaults\n",
|
||||
bus_8131[0][0]);
|
||||
}
|
||||
|
||||
apicid_base = get_apicid_base(15);
|
||||
|
||||
apicid_8111 = apicid_base++;
|
||||
|
||||
apicid_8131[0][0] = apicid_base++;
|
||||
|
||||
apicid_8131[0][1] = apicid_base++;
|
||||
|
||||
|
||||
/* HT chain 1 */
|
||||
for (i = 1; i < 4; i++) {
|
||||
if (pci1234[i] & 0x1) {
|
||||
int j = (i - 1) * 2 + 1;
|
||||
bus_8131[j][0] = (pci1234[i] >> 16) & 0xff;
|
||||
/* 8131 */
|
||||
dev = dev_find_slot(bus_8131[j][0], PCI_DEVFN(sbdnx[j], 0));
|
||||
if (dev) {
|
||||
bus_8131[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
}
|
||||
apicid_8131[j][0] = apicid_base++;
|
||||
dev = dev_find_slot(bus_8131[j][0], PCI_DEVFN(sbdnx[j] + 1, 0));
|
||||
if (dev) {
|
||||
bus_8131[j][2] = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
}
|
||||
apicid_8131[j][1] = apicid_base++;
|
||||
|
||||
bus_8131[j + 1][0] = bus_8131[j][0];
|
||||
/* 8131 */
|
||||
dev = dev_find_slot(bus_8131[j + 1][0], PCI_DEVFN(sbdnx[j + 1], 0));
|
||||
if (dev) {
|
||||
bus_8131[j + 1][1] = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
}
|
||||
apicid_8131[j + 1][0] = apicid_base++;
|
||||
|
||||
dev = dev_find_slot(bus_8131[i + 1][0], PCI_DEVFN(sbdnx[j + 1] + 1, 0));
|
||||
if (dev) {
|
||||
bus_8131[j + 1][2] = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
bus_isa = pci_read_config8(dev, PCI_SUBORDINATE_BUS);
|
||||
bus_isa++;
|
||||
|
||||
}
|
||||
apicid_8131[j + 1][0] = apicid_base++;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -1,60 +0,0 @@
|
|||
#include <arch/pirq_routing.h>
|
||||
#include <device/pci.h>
|
||||
|
||||
#define IRQ_ROUTER_BUS 1
|
||||
#define IRQ_ROUTER_DEVFN PCI_DEVFN(4,3)
|
||||
#define IRQ_ROUTER_VENDOR 0x1022
|
||||
#define IRQ_ROUTER_DEVICE 0x746b
|
||||
|
||||
#define AVAILABLE_IRQS 0xdef8
|
||||
#define IRQ_SLOT(slot, bus, dev, fn, linka, linkb, linkc, linkd) \
|
||||
{ bus, (dev<<3)|fn, {{ linka, AVAILABLE_IRQS}, { linkb, AVAILABLE_IRQS}, \
|
||||
{linkc, AVAILABLE_IRQS}, {linkd, AVAILABLE_IRQS}}, slot, 0}
|
||||
|
||||
/* Each IRQ_SLOT entry consists of:
|
||||
* bus, devfn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu
|
||||
*/
|
||||
|
||||
const struct irq_routing_table intel_irq_routing_table = {
|
||||
PIRQ_SIGNATURE, /* u32 signature */
|
||||
PIRQ_VERSION, /* u16 version */
|
||||
32+16*IRQ_SLOT_COUNT, /* there can be total IRQ_SLOT_COUNT table entries */
|
||||
IRQ_ROUTER_BUS, /* Where the interrupt router lies (bus) */
|
||||
IRQ_ROUTER_DEVFN, /* Where the interrupt router lies (dev) */
|
||||
0x00, /* IRQs devoted exclusively to PCI usage */
|
||||
IRQ_ROUTER_VENDOR, /* Vendor */
|
||||
IRQ_ROUTER_DEVICE, /* Device */
|
||||
0x00, /* Crap (miniport) */
|
||||
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
|
||||
0x6a, /* u8 checksum , mod 256 checksum must give zero */
|
||||
{ /* slot(0=onboard), devfn, irqlinks (line id, 0=not routed) */
|
||||
IRQ_SLOT(0, 0x01,4,0, 1,2,3,4 ), /* 8111 PCI bridge */
|
||||
IRQ_SLOT(0, 0x04,0,0, 4,0,0,0 ), /* 8111 USB */
|
||||
IRQ_SLOT(1, 0x06,1,0, 2,3,4,1 ), /* ???? was: bus A*/
|
||||
IRQ_SLOT(2, 0x07,1,0, 2,3,4,1 ), /* ???? was: bus 9*/
|
||||
IRQ_SLOT(3, 0x0a,1,0, 2,3,4,1 ), /* IBM PCI-X <-> PCI-X */
|
||||
IRQ_SLOT(4, 0x08,1,0, 2,3,4,1 ), /* IBM PCI-X <-> PCI-X */
|
||||
IRQ_SLOT(0, 0x04,4,0, 1,0,0,0 ), /* ATI Rage */
|
||||
IRQ_SLOT(0, 0x06,2,0, 3,4,0,0 ), /* ???? was: bus A */
|
||||
IRQ_SLOT(0, 0x07,2,0, 3,4,0,0 ), /* ???? was: bus 9 */
|
||||
IRQ_SLOT(0, 0x0a,2,0, 3,4,0,0 ), /* Intel 82546EB GBit */
|
||||
IRQ_SLOT(0, 0x08,2,0, 3,4,0,0 ), /* Intel 82546EB GBit */
|
||||
IRQ_SLOT(0, 0x0d,1,0, 1,0,0,0 ), /* Marvell MV88SX5080 SATA */
|
||||
IRQ_SLOT(0, 0x0d,2,0, 2,0,0,0 ), /* Marvell MV88SX5080 SATA */
|
||||
IRQ_SLOT(0, 0x0e,1,0, 1,2,3,4 ), /* Intel Memory Controller 031a */
|
||||
IRQ_SLOT(0, 0x0f,1,0, 1,0,0,0 ), /* Marvell MV88SX5080 SATA */
|
||||
IRQ_SLOT(0, 0x04,5,0, 2,0,0,0 ), /* Intel 8255 Ethernet */
|
||||
IRQ_SLOT(5, 0x10,1,0, 1,2,3,4 ), /* ???? was: bus C */
|
||||
IRQ_SLOT(0, 0x12,1,0, 1,0,0,0 ), /* Marvell MV88SX5080 SATA */
|
||||
IRQ_SLOT(0, 0x12,2,0, 2,0,0,0 ), /* Marvell MV88SX5080 SATA */
|
||||
IRQ_SLOT(0, 0x13,1,0, 1,2,3,4 ), /* Intel Memory Controller 031b */
|
||||
IRQ_SLOT(0, 0x14,1,0, 1,0,0,0 ), /* Marvell MV88SX5080 SATA */
|
||||
IRQ_SLOT(6, 0x15,1,0, 1,2,3,4 ), /* ???? was: bus 11 */
|
||||
/* Let Linux know about bus 1 */
|
||||
IRQ_SLOT(0, 1,4,3, 0,0,0,0 ),
|
||||
}
|
||||
};
|
||||
unsigned long write_pirq_routing_table(unsigned long addr)
|
||||
{
|
||||
return copy_pirq_routing_table(addr);
|
||||
}
|
||||
|
|
@ -1,330 +0,0 @@
|
|||
#include <console/console.h>
|
||||
#include <device/device.h>
|
||||
#include <device/pci.h>
|
||||
#include <device/pci_ids.h>
|
||||
#include <device/pci_ops.h>
|
||||
#include <cpu/x86/msr.h>
|
||||
#include <part/hard_reset.h>
|
||||
#include <device/smbus.h>
|
||||
#include <delay.h>
|
||||
|
||||
#include <arch/io.h>
|
||||
#include "../../../northbridge/amd/amdk8/northbridge.h"
|
||||
#include <cpu/amd/model_fxx_rev.h>
|
||||
#include "chip.h"
|
||||
|
||||
#include "pc80/mc146818rtc.h"
|
||||
|
||||
|
||||
#undef DEBUG
|
||||
#define DEBUG 0
|
||||
#if DEBUG
|
||||
static void debug_init(device_t dev)
|
||||
{
|
||||
unsigned bus;
|
||||
unsigned devfn;
|
||||
#if 0
|
||||
for(bus = 0; bus < 256; bus++) {
|
||||
for(devfn = 0; devfn < 256; devfn++) {
|
||||
int i;
|
||||
dev = dev_find_slot(bus, devfn);
|
||||
if (!dev) {
|
||||
continue;
|
||||
}
|
||||
if (!dev->enabled) {
|
||||
continue;
|
||||
}
|
||||
printk_info("%02x:%02x.%0x aka %s\n",
|
||||
bus, devfn >> 3, devfn & 7, dev_path(dev));
|
||||
for(i = 0; i < 256; i++) {
|
||||
if ((i & 0x0f) == 0) {
|
||||
printk_info("%02x:", i);
|
||||
}
|
||||
printk_info(" %02x", pci_read_config8(dev, i));
|
||||
if ((i & 0x0f) == 0xf) {
|
||||
printk_info("\n");
|
||||
}
|
||||
}
|
||||
printk_info("\n");
|
||||
}
|
||||
}
|
||||
#endif
|
||||
#if 0
|
||||
msr_t msr;
|
||||
unsigned index;
|
||||
unsigned eax, ebx, ecx, edx;
|
||||
index = 0x80000007;
|
||||
printk_debug("calling cpuid 0x%08x\n", index);
|
||||
asm volatile(
|
||||
"cpuid"
|
||||
: "=a" (eax), "=b" (ebx), "=c" (ecx), "=d" (edx)
|
||||
: "a" (index)
|
||||
);
|
||||
printk_debug("cpuid[%08x]: %08x %08x %08x %08x\n",
|
||||
index, eax, ebx, ecx, edx);
|
||||
if (edx & (3 << 1)) {
|
||||
index = 0xC0010042;
|
||||
printk_debug("Reading msr: 0x%08x\n", index);
|
||||
msr = rdmsr(index);
|
||||
printk_debug("msr[0x%08x]: 0x%08x%08x\n",
|
||||
index, msr.hi, msr.hi);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
static void debug_noop(device_t dummy)
|
||||
{
|
||||
}
|
||||
|
||||
static struct device_operations debug_operations = {
|
||||
.read_resources = debug_noop,
|
||||
.set_resources = debug_noop,
|
||||
.enable_resources = debug_noop,
|
||||
.init = debug_init,
|
||||
};
|
||||
|
||||
static unsigned int scan_root_bus(device_t root, unsigned int max)
|
||||
{
|
||||
struct device_path path;
|
||||
device_t debug;
|
||||
max = root_dev_scan_bus(root, max);
|
||||
path.type = DEVICE_PATH_PNP;
|
||||
path.u.pnp.port = 0;
|
||||
path.u.pnp.device = 0;
|
||||
debug = alloc_dev(&root->link[1], &path);
|
||||
debug->ops = &debug_operations;
|
||||
return max;
|
||||
}
|
||||
#endif
|
||||
|
||||
#if 1
|
||||
static void handle_smbus_error(int value, const char *msg)
|
||||
{
|
||||
if (value >= 0) {
|
||||
return;
|
||||
}
|
||||
switch(value) {
|
||||
case SMBUS_WAIT_UNTIL_READY_TIMEOUT:
|
||||
printk_emerg("SMBUS wait until ready timed out - resetting...");
|
||||
hard_reset();
|
||||
break;
|
||||
case SMBUS_WAIT_UNTIL_DONE_TIMEOUT:
|
||||
printk_emerg("SMBUS wait until done timed out - resetting...");
|
||||
hard_reset();
|
||||
break;
|
||||
default:
|
||||
die(msg);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
#define ADM1026_DEVICE 0x2d /* Either 0x2c, 0x2d or 0x2e. */
|
||||
#define ADM1026_REG_CONFIG1 0x00
|
||||
#define CFG1_MONITOR 0x01
|
||||
#define CFG1_INT_ENABLE 0x02
|
||||
#define CFG1_INT_CLEAR 0x04
|
||||
#define CFG1_AIN8_9 0x08
|
||||
#define CFG1_THERM_HOT 0x10
|
||||
#define CFT1_DAC_AFC 0x20
|
||||
#define CFG1_PWM_AFC 0x40
|
||||
#define CFG1_RESET 0x80
|
||||
#define ADM1026_REG_CONFIG2 0x01
|
||||
#define ADM1026_REG_CONFIG3 0x07
|
||||
|
||||
|
||||
|
||||
#define BILLION 1000000000UL
|
||||
|
||||
static void verify_cpu_voltage(const char *name,
|
||||
device_t dev, unsigned int reg,
|
||||
unsigned factor, unsigned cpu_volts, unsigned delta)
|
||||
{
|
||||
unsigned nvolts_lo, nvolts_hi;
|
||||
unsigned cpuvolts_hi, cpuvolts_lo;
|
||||
int value;
|
||||
int loops;
|
||||
|
||||
loops = 1000;
|
||||
do {
|
||||
value = smbus_read_byte(dev, reg);
|
||||
handle_smbus_error(value, "SMBUS read byte failed");
|
||||
} while ((--loops > 0) && value == 0);
|
||||
/* Convert the byte value to nanoVolts.
|
||||
* My accuracy is nowhere near that good but I don't
|
||||
* have to round so the math is simple.
|
||||
* I can only go up to about 4.2 Volts this way so my range is
|
||||
* limited.
|
||||
*/
|
||||
nvolts_lo = ((unsigned)value * factor);
|
||||
nvolts_hi = nvolts_lo + factor - 1;
|
||||
/* Get the range of acceptable cpu voltage values */
|
||||
cpuvolts_lo = cpu_volts - delta;
|
||||
cpuvolts_hi = cpu_volts + delta;
|
||||
if ((nvolts_lo < cpuvolts_lo) || (nvolts_hi > cpuvolts_hi)) {
|
||||
printk_emerg("%s at (%u.%09u-%u.%09u)Volts expected %u.%09u+/-%u.%09uVolts\n",
|
||||
name,
|
||||
nvolts_lo/BILLION, nvolts_lo%BILLION,
|
||||
nvolts_hi/BILLION, nvolts_hi%BILLION,
|
||||
cpu_volts/BILLION, cpu_volts%BILLION,
|
||||
delta/BILLION, delta%BILLION);
|
||||
die("");
|
||||
}
|
||||
printk_info("%s at (%u.%09u-%u.%09u)Volts\n",
|
||||
name,
|
||||
nvolts_lo/BILLION, nvolts_lo%BILLION,
|
||||
nvolts_hi/BILLION, nvolts_hi%BILLION);
|
||||
|
||||
}
|
||||
|
||||
static void adm1026_enable_monitoring(device_t dev)
|
||||
{
|
||||
int result;
|
||||
result = smbus_read_byte(dev, ADM1026_REG_CONFIG1);
|
||||
handle_smbus_error(result, "ADM1026: cannot read config1");
|
||||
|
||||
result = (result | CFG1_MONITOR) & ~(CFG1_INT_CLEAR | CFG1_RESET);
|
||||
result = smbus_write_byte(dev, ADM1026_REG_CONFIG1, result);
|
||||
handle_smbus_error(result, "ADM1026: cannot write to config1");
|
||||
|
||||
result = smbus_read_byte(dev, ADM1026_REG_CONFIG1);
|
||||
handle_smbus_error(result, "ADM1026: cannot reread config1");
|
||||
if (!(result & CFG1_MONITOR)) {
|
||||
die("ADM1026: monitoring would not enable");
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
static unsigned k8_cpu_volts(void)
|
||||
{
|
||||
unsigned volts = ~0;
|
||||
if (is_cpu_c0()) {
|
||||
volts = 1500000000;
|
||||
}
|
||||
if (is_cpu_b3()) {
|
||||
volts = 1550000000;
|
||||
}
|
||||
return volts;
|
||||
}
|
||||
|
||||
static void verify_cpu_voltages(device_t dev)
|
||||
{
|
||||
unsigned cpu_volts;
|
||||
unsigned delta;
|
||||
#if 0
|
||||
delta = 50000000;
|
||||
#else
|
||||
delta = 75000000;
|
||||
#endif
|
||||
cpu_volts = k8_cpu_volts();
|
||||
if (cpu_volts == ~0) {
|
||||
printk_info("Required cpu voltage unknwon not checking\n");
|
||||
return;
|
||||
}
|
||||
/* I need to read registers 0x37 == Ain7CPU1 core 0x2d == VcppCPU0 core */
|
||||
/* CPU1 core
|
||||
* The sensor has a range of 0-2.5V and reports in
|
||||
* 256 distinct steps.
|
||||
*/
|
||||
verify_cpu_voltage("CPU1 Vcore", dev, 0x37, 9765625,
|
||||
cpu_volts, delta);
|
||||
/* CPU0 core
|
||||
* The sensor has range of 0-3.0V and reports in
|
||||
* 256 distinct steps.
|
||||
*/
|
||||
verify_cpu_voltage("CPU0 Vcore", dev, 0x2d, 11718750,
|
||||
cpu_volts, delta);
|
||||
}
|
||||
|
||||
#define SMBUS_MUX 0x71
|
||||
|
||||
static void do_verify_cpu_voltages(void)
|
||||
{
|
||||
device_t smbus_dev;
|
||||
device_t mux, sensor;
|
||||
struct device_path mux_path, sensor_path;
|
||||
int result;
|
||||
int mux_setting;
|
||||
|
||||
/* Find the smbus controller */
|
||||
smbus_dev = dev_find_device(0x1022, 0x746b, 0);
|
||||
if (!smbus_dev) {
|
||||
die("SMBUS controller not found\n");
|
||||
}
|
||||
|
||||
/* Find the smbus mux */
|
||||
mux_path.type = DEVICE_PATH_I2C;
|
||||
mux_path.u.i2c.device = SMBUS_MUX;
|
||||
mux = find_dev_path(smbus_dev, &mux_path);
|
||||
if (!mux) {
|
||||
die("SMBUS mux not found\n");
|
||||
}
|
||||
|
||||
/* Find the adm1026 sensor */
|
||||
sensor_path.type = DEVICE_PATH_I2C;
|
||||
sensor_path.u.i2c.device = ADM1026_DEVICE;
|
||||
sensor = find_dev_path(mux, &sensor_path);
|
||||
if (!sensor) {
|
||||
die("ADM1026 not found\n");
|
||||
}
|
||||
|
||||
/* Set the mux to see the temperature sensors */
|
||||
mux_setting = 1;
|
||||
result = smbus_send_byte(mux, mux_setting);
|
||||
handle_smbus_error(result, "SMBUS send byte failed\n");
|
||||
|
||||
result = smbus_recv_byte(mux);
|
||||
handle_smbus_error(result, "SMBUS recv byte failed\n");
|
||||
if (result != mux_setting) {
|
||||
printk_emerg("SMBUS mux would not set to %d\n", mux_setting);
|
||||
die("");
|
||||
}
|
||||
|
||||
adm1026_enable_monitoring(sensor);
|
||||
|
||||
/* It takes 11.38ms to read a new voltage sensor value */
|
||||
mdelay(12);
|
||||
|
||||
/* Read the cpu voltages and make certain everything looks sane */
|
||||
verify_cpu_voltages(sensor);
|
||||
}
|
||||
#else
|
||||
#define do_verify_cpu_voltages() do {} while(0)
|
||||
#endif
|
||||
|
||||
|
||||
static void fixup_aruma(void)
|
||||
{
|
||||
msr_t msr;
|
||||
|
||||
/* bit 6 (0x40) in MSR 0xC0010015
|
||||
* disables the TLB cache flush filter
|
||||
*/
|
||||
msr=rdmsr(0xC0010015);
|
||||
msr.lo |= 0x40;
|
||||
wrmsr(0xC0010015, msr);
|
||||
}
|
||||
|
||||
|
||||
static void mainboard_init(device_t dev)
|
||||
{
|
||||
root_dev_init(dev);
|
||||
|
||||
printk_info("Initializing mainboard components... ");
|
||||
// do_verify_cpu_voltages();
|
||||
printk_info("ok\n");
|
||||
|
||||
printk_info("Initializing mainboard specific functions... ");
|
||||
fixup_aruma();
|
||||
printk_info("ok\n");
|
||||
}
|
||||
|
||||
static void enable_dev(struct device *dev)
|
||||
{
|
||||
dev->ops->init = mainboard_init;
|
||||
}
|
||||
|
||||
struct chip_operations mainboard_agami_aruma_ops = {
|
||||
CHIP_NAME("AGAMI Aruma Mainboard")
|
||||
.enable_dev = enable_dev,
|
||||
};
|
||||
|
||||
|
|
@ -1,246 +0,0 @@
|
|||
#include <console/console.h>
|
||||
#include <arch/smp/mpspec.h>
|
||||
#include <cpu/x86/lapic.h>
|
||||
#include <device/pci.h>
|
||||
#include <string.h>
|
||||
#include <stdint.h>
|
||||
|
||||
#define WRITE_IOAPIC(bus,device,fn,id,version) \
|
||||
do { \
|
||||
device_t dev; \
|
||||
struct resource *res; \
|
||||
dev = dev_find_slot(bus, PCI_DEVFN(device,fn)); \
|
||||
if (!dev) break; \
|
||||
res = find_resource(dev, PCI_BASE_ADDRESS_0); \
|
||||
if (!res) break; \
|
||||
smp_write_ioapic(mc, id, version, res->base); \
|
||||
} while(0);
|
||||
|
||||
unsigned get_apicid_base(unsigned ioapic_num);
|
||||
|
||||
void *smp_write_config_table(void *v)
|
||||
{
|
||||
static const char sig[4] = "PCMP";
|
||||
static const char oem[8] = "AGAMI ";
|
||||
static const char productid[12] = "ARUMA ";
|
||||
struct mp_config_table *mc;
|
||||
int i;
|
||||
unsigned apicid_base;
|
||||
unsigned char bus_isa;
|
||||
device_t dev;
|
||||
|
||||
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
|
||||
memset(mc, 0, sizeof(*mc));
|
||||
|
||||
memcpy(mc->mpc_signature, sig, sizeof(sig));
|
||||
mc->mpc_length = sizeof(*mc); /* initially just the header */
|
||||
mc->mpc_spec = 0x04;
|
||||
mc->mpc_checksum = 0; /* not yet computed */
|
||||
memcpy(mc->mpc_oem, oem, sizeof(oem));
|
||||
memcpy(mc->mpc_productid, productid, sizeof(productid));
|
||||
mc->mpc_oemptr = 0;
|
||||
mc->mpc_oemsize = 0;
|
||||
mc->mpc_entry_count = 0; /* No entries yet... */
|
||||
mc->mpc_lapic = LAPIC_ADDR;
|
||||
mc->mpe_length = 0;
|
||||
mc->mpe_checksum = 0;
|
||||
mc->reserved = 0;
|
||||
|
||||
smp_write_processors(mc);
|
||||
|
||||
/* Write busses */
|
||||
bus_isa=22; // ISA
|
||||
for (i=0; i<bus_isa; i++)
|
||||
smp_write_bus(mc, i, "PCI ");
|
||||
smp_write_bus(mc, bus_isa, "ISA ");
|
||||
|
||||
/* enable ext_apic_id */
|
||||
#if 1
|
||||
apicid_base = 1;
|
||||
#else
|
||||
apicid_base = get_apicid_base(15);
|
||||
if(lapicid()>=0x10) {
|
||||
apicid_base = 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
printk_info("APIC ID BASE=0x%x\n",apicid_base);
|
||||
|
||||
/* I/O APICs */
|
||||
smp_write_ioapic(mc, apicid_base, 0x11, 0xfec00000); // 8111 IOAPIC
|
||||
/* Write all 8131 IOAPICs */
|
||||
/* (8131: bus, dev, fn) , id, version */
|
||||
WRITE_IOAPIC(0x01,1,1, apicid_base+1, 0x11);
|
||||
WRITE_IOAPIC(0x01,2,1, apicid_base+2, 0x11);
|
||||
WRITE_IOAPIC(0x05,1,1, apicid_base+3, 0x11);
|
||||
WRITE_IOAPIC(0x05,2,1, apicid_base+4, 0x11);
|
||||
WRITE_IOAPIC(0x05,3,1, apicid_base+5, 0x11);
|
||||
WRITE_IOAPIC(0x05,4,1, apicid_base+6, 0x11);
|
||||
WRITE_IOAPIC(0x0c,1,1, apicid_base+7, 0x11);
|
||||
WRITE_IOAPIC(0x0c,2,1, apicid_base+8, 0x11);
|
||||
WRITE_IOAPIC(0x0c,3,1, apicid_base+9, 0x11);
|
||||
WRITE_IOAPIC(0x0c,4,1, apicid_base+10, 0x11);
|
||||
WRITE_IOAPIC(0x11,1,1, apicid_base+11, 0x11);
|
||||
WRITE_IOAPIC(0x11,2,1, apicid_base+12, 0x11);
|
||||
WRITE_IOAPIC(0x11,3,1, apicid_base+13, 0x11);
|
||||
WRITE_IOAPIC(0x11,4,1, apicid_base+14, 0x11);
|
||||
|
||||
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
|
||||
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_base, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x1, apicid_base, 0x1);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, apicid_base, 0x2);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x3, apicid_base, 0x3);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x4, apicid_base, 0x4);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x6, apicid_base, 0x6);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x7, apicid_base, 0x7);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x8, apicid_base, 0x8);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xc, apicid_base, 0xc);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xd, apicid_base, 0xd);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xe, apicid_base, 0xe);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0xf, apicid_base, 0xf);
|
||||
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 1, (4<<2)|0, apicid_base, 0x13);
|
||||
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x1, 0x1f, apicid_base, 0x13);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x03, apicid_base, 0x13);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x10, apicid_base, 0x10);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x4, 0x14, apicid_base, 0x11);
|
||||
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xb, 0x10, 0x5, 0x1);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xb, 0x11, 0x5, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xb, 0x14, 0x5, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xb, 0x15, 0x5, 0x3);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xb, 0x18, 0x5, 0x3);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xb, 0x19, 0x5, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xa, 0x8, 0x5, 0x2);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xa, 0x9, 0x5, 0x3);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x9, 0x10, 0x6, 0x1);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x9, 0x11, 0x6, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x9, 0x14, 0x6, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x9, 0x15, 0x6, 0x3);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x9, 0x18, 0x6, 0x3);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x9, 0x19, 0x6, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x8, 0x8, 0x6, 0x2);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x8, 0x9, 0x6, 0x3);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xd, 0x4, 0x7, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xd, 0x8, 0x7, 0x1);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xe, 0x4, 0x8, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0xf, 0x4, 0x9, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x12, 0x4, 0xb, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x12, 0x8, 0xb, 0x1);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x13, 0x4, 0xc, 0x0);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, 0x14, 0x4, 0xd, 0x0);
|
||||
|
||||
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
|
||||
smp_write_intsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x0);
|
||||
smp_write_intsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, bus_isa, 0x0, MP_APIC_ALL, 0x1);
|
||||
|
||||
/*
|
||||
MP Config Extended Table Entries:
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 0 address type: I/O address
|
||||
address base: 0x9000
|
||||
address range: 0x2000
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 0 address type: I/O address
|
||||
address base: 0x0
|
||||
address range: 0x100
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 0 address type: memory address
|
||||
address base: 0xa0000
|
||||
address range: 0x20000
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 0 address type: memory address
|
||||
address base: 0xaed00000
|
||||
address range: 0x2200000
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 0 address type: prefetch address
|
||||
address base: 0xb0f00000
|
||||
address range: 0x100000
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 4 address type: I/O address
|
||||
address base: 0xb000
|
||||
address range: 0x2000
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 4 address type: memory address
|
||||
address base: 0xb1000000
|
||||
address range: 0x700000
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 4 address type: prefetch address
|
||||
address base: 0xb1700000
|
||||
address range: 0x500000
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 11 address type: memory address
|
||||
address base: 0xb1c00000
|
||||
address range: 0x400000
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 11 address type: prefetch address
|
||||
address base: 0xb2000000
|
||||
address range: 0x2400000
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 16 address type: memory address
|
||||
address base: 0xb4400000
|
||||
address range: 0x400000
|
||||
--
|
||||
System Address Space
|
||||
bus ID: 16 address type: prefetch address
|
||||
address base: 0xb4800000
|
||||
address range: 0x4a400000
|
||||
--
|
||||
Bus Heirarchy
|
||||
bus ID: 21 bus info: 0x01 parent bus ID: 0--
|
||||
Compatibility Bus Address
|
||||
bus ID: 0 address modifier: add
|
||||
predefined range: 0x00000000--
|
||||
Compatibility Bus Address
|
||||
bus ID: 4 address modifier: subtract
|
||||
predefined range: 0x00000000--
|
||||
Compatibility Bus Address
|
||||
bus ID: 11 address modifier: subtract
|
||||
predefined range: 0x00000000--
|
||||
Compatibility Bus Address
|
||||
bus ID: 16 address modifier: subtract
|
||||
predefined range: 0x00000000--
|
||||
Compatibility Bus Address
|
||||
bus ID: 0 address modifier: add
|
||||
predefined range: 0x00000001--
|
||||
Compatibility Bus Address
|
||||
bus ID: 4 address modifier: subtract
|
||||
predefined range: 0x00000001--
|
||||
Compatibility Bus Address
|
||||
bus ID: 11 address modifier: subtract
|
||||
predefined range: 0x00000001--
|
||||
Compatibility Bus Address
|
||||
bus ID: 16 address modifier: subtract
|
||||
predefined range: 0x00000001
|
||||
*/
|
||||
|
||||
/* There is no extension information... */
|
||||
|
||||
/* Compute the checksums */
|
||||
mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length);
|
||||
mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length);
|
||||
printk_debug("Wrote the mp table end at: %p - %p\n",
|
||||
mc, smp_next_mpe_entry(mc));
|
||||
return smp_next_mpe_entry(mc);
|
||||
}
|
||||
|
||||
unsigned long write_smp_table(unsigned long addr)
|
||||
{
|
||||
void *v;
|
||||
v = smp_write_floating_table(addr);
|
||||
return (unsigned long)smp_write_config_table(v);
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -1,271 +0,0 @@
|
|||
/*
|
||||
* Agami Aruma needs a different resource map
|
||||
*
|
||||
*/
|
||||
|
||||
static void setup_aruma_resource_map(void)
|
||||
{
|
||||
static const unsigned int register_values[] = {
|
||||
/* Careful set limit registers before base registers which contain the enables */
|
||||
/* DRAM Limit i Registers
|
||||
* F1:0x44 i = 0
|
||||
* F1:0x4C i = 1
|
||||
* F1:0x54 i = 2
|
||||
* F1:0x5C i = 3
|
||||
* F1:0x64 i = 4
|
||||
* F1:0x6C i = 5
|
||||
* F1:0x74 i = 6
|
||||
* F1:0x7C i = 7
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 7: 3] Reserved
|
||||
* [10: 8] Interleave select
|
||||
* specifies the values of A[14:12] to use with interleave enable.
|
||||
* [15:11] Reserved
|
||||
* [31:16] DRAM Limit Address i Bits 39-24
|
||||
* This field defines the upper address bits of a 40 bit address
|
||||
* that define the end of the DRAM region.
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
|
||||
PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
|
||||
PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
|
||||
PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
|
||||
PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
|
||||
PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
|
||||
PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
|
||||
/* DRAM Base i Registers
|
||||
* F1:0x40 i = 0
|
||||
* F1:0x48 i = 1
|
||||
* F1:0x50 i = 2
|
||||
* F1:0x58 i = 3
|
||||
* F1:0x60 i = 4
|
||||
* F1:0x68 i = 5
|
||||
* F1:0x70 i = 6
|
||||
* F1:0x78 i = 7
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 7: 2] Reserved
|
||||
* [10: 8] Interleave Enable
|
||||
* 000 = No interleave
|
||||
* 001 = Interleave on A[12] (2 nodes)
|
||||
* 010 = reserved
|
||||
* 011 = Interleave on A[12] and A[14] (4 nodes)
|
||||
* 100 = reserved
|
||||
* 101 = reserved
|
||||
* 110 = reserved
|
||||
* 111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
|
||||
* [15:11] Reserved
|
||||
* [13:16] DRAM Base Address i Bits 39-24
|
||||
* This field defines the upper address bits of a 40-bit address
|
||||
* that define the start of the DRAM region.
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,
|
||||
|
||||
/* Memory-Mapped I/O Limit i Registers
|
||||
* F1:0x84 i = 0
|
||||
* F1:0x8C i = 1
|
||||
* F1:0x94 i = 2
|
||||
* F1:0x9C i = 3
|
||||
* F1:0xA4 i = 4
|
||||
* F1:0xAC i = 5
|
||||
* F1:0xB4 i = 6
|
||||
* F1:0xBC i = 7
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 3: 3] Reserved
|
||||
* [ 5: 4] Destination Link ID
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 = Reserved
|
||||
* [ 6: 6] Reserved
|
||||
* [ 7: 7] Non-Posted
|
||||
* 0 = CPU writes may be posted
|
||||
* 1 = CPU writes must be non-posted
|
||||
* [31: 8] Memory-Mapped I/O Limit Address i (39-16)
|
||||
* This field defines the upp adddress bits of a 40-bit address that
|
||||
* defines the end of a memory-mapped I/O region n
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x84), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x8C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x94), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x9C), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xAC), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB4), 0x00000048, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xBC), 0x00000048, 0x00ffff10, // Link 1 CPU 0
|
||||
|
||||
/* Memory-Mapped I/O Base i Registers
|
||||
* F1:0x80 i = 0
|
||||
* F1:0x88 i = 1
|
||||
* F1:0x90 i = 2
|
||||
* F1:0x98 i = 3
|
||||
* F1:0xA0 i = 4
|
||||
* F1:0xA8 i = 5
|
||||
* F1:0xB0 i = 6
|
||||
* F1:0xB8 i = 7
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 2: 2] Cpu Disable
|
||||
* 0 = Cpu can use this I/O range
|
||||
* 1 = Cpu requests do not use this I/O range
|
||||
* [ 3: 3] Lock
|
||||
* 0 = base/limit registers i are read/write
|
||||
* 1 = base/limit registers i are read-only
|
||||
* [ 7: 4] Reserved
|
||||
* [31: 8] Memory-Mapped I/O Base Address i (39-16)
|
||||
* This field defines the upper address bits of a 40bit address
|
||||
* that defines the start of memory-mapped I/O region i
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0x80), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x88), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x90), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0x98), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xA8), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB0), 0x000000f0, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xB8), 0x000000f0, 0x00fc0003,
|
||||
|
||||
/* PCI I/O Limit i Registers
|
||||
* F1:0xC4 i = 0
|
||||
* F1:0xCC i = 1
|
||||
* F1:0xD4 i = 2
|
||||
* F1:0xDC i = 3
|
||||
* [ 2: 0] Destination Node ID
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 3: 3] Reserved
|
||||
* [ 5: 4] Destination Link ID
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 = reserved
|
||||
* [11: 6] Reserved
|
||||
* [24:12] PCI I/O Limit Address i
|
||||
* This field defines the end of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0xC4), 0xFE000FC8, 0x01fff010, // CPU0 LDT1
|
||||
PCI_ADDR(0, 0x18, 1, 0xCC), 0xFE000FC8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD4), 0xFE000FC8, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xDC), 0xFE000FC8, 0x00000000,
|
||||
|
||||
/* PCI I/O Base i Registers
|
||||
* F1:0xC0 i = 0
|
||||
* F1:0xC8 i = 1
|
||||
* F1:0xD0 i = 2
|
||||
* F1:0xD8 i = 3
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 3: 2] Reserved
|
||||
* [ 4: 4] VGA Enable
|
||||
* 0 = VGA matches Disabled
|
||||
* 1 = matches all address < 64K and where A[9:0] is in the
|
||||
* range 3B0-3BB or 3C0-3DF independen of the base & limit registers
|
||||
* [ 5: 5] ISA Enable
|
||||
* 0 = ISA matches Disabled
|
||||
* 1 = Blocks address < 64K and in the last 768 bytes of eack 1K block
|
||||
* from matching agains this base/limit pair
|
||||
* [11: 6] Reserved
|
||||
* [24:12] PCI I/O Base i
|
||||
* This field defines the start of PCI I/O region n
|
||||
* [31:25] Reserved
|
||||
*/
|
||||
PCI_ADDR(0, 0x18, 1, 0xC0), 0xFE000FCC, 0x00000003,
|
||||
PCI_ADDR(0, 0x18, 1, 0xC8), 0xFE000FCC, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD0), 0xFE000FCC, 0x00000000,
|
||||
PCI_ADDR(0, 0x18, 1, 0xD8), 0xFE000FCC, 0x00000000,
|
||||
|
||||
/* Config Base and Limit i Registers
|
||||
* F1:0xE0 i = 0
|
||||
* F1:0xE4 i = 1
|
||||
* F1:0xE8 i = 2
|
||||
* F1:0xEC i = 3
|
||||
* [ 0: 0] Read Enable
|
||||
* 0 = Reads Disabled
|
||||
* 1 = Reads Enabled
|
||||
* [ 1: 1] Write Enable
|
||||
* 0 = Writes Disabled
|
||||
* 1 = Writes Enabled
|
||||
* [ 2: 2] Device Number Compare Enable
|
||||
* 0 = The ranges are based on bus number
|
||||
* 1 = The ranges are ranges of devices on bus 0
|
||||
* [ 3: 3] Reserved
|
||||
* [ 6: 4] Destination Node
|
||||
* 000 = Node 0
|
||||
* 001 = Node 1
|
||||
* 010 = Node 2
|
||||
* 011 = Node 3
|
||||
* 100 = Node 4
|
||||
* 101 = Node 5
|
||||
* 110 = Node 6
|
||||
* 111 = Node 7
|
||||
* [ 7: 7] Reserved
|
||||
* [ 9: 8] Destination Link
|
||||
* 00 = Link 0
|
||||
* 01 = Link 1
|
||||
* 10 = Link 2
|
||||
* 11 - Reserved
|
||||
* [15:10] Reserved
|
||||
* [23:16] Bus Number Base i
|
||||
* This field defines the lowest bus number in configuration region i
|
||||
* [31:24] Bus Number Limit i
|
||||
* This field defines the highest bus number in configuration regin i
|
||||
*/
|
||||
|
||||
PCI_ADDR(0, 0x18, 1, 0xE0), 0x0000FC88, 0x04000103, // CPU0 LDT1
|
||||
PCI_ADDR(0, 0x18, 1, 0xE4), 0x0000FC88, 0x0b050213, // CPU1 LDT2
|
||||
PCI_ADDR(0, 0x18, 1, 0xE8), 0x0000FC88, 0x100c0223, // CPU2 LDT2
|
||||
PCI_ADDR(0, 0x18, 1, 0xEC), 0x0000FC88, 0x15110133, // CPU3 LTD1
|
||||
|
||||
/* setup power management registers */
|
||||
PCI_ADDR(0, 0x18, 3, 0x80), 0x80808080, 0x23070000, // PM control low
|
||||
PCI_ADDR(0, 0x18, 3, 0x84), 0x80808080, 0x00132113, // PM control high
|
||||
PCI_ADDR(0, 0x18, 3, 0xD8), 0x8E000000, 0x20002710, // Clock PM high
|
||||
|
||||
};
|
||||
int max;
|
||||
max = ARRAY_SIZE(register_values);
|
||||
setup_resource_map(register_values, max);
|
||||
}
|
||||
|
||||
|
|
@ -1,77 +0,0 @@
|
|||
/*
|
||||
* Copyright 2005 AMD
|
||||
*/
|
||||
DefinitionBlock ("SSDT.aml", "SSDT", 1, "AMD-K8", "AMD-ACPI", 100925440)
|
||||
{
|
||||
/*
|
||||
* These objects were referenced but not defined in this table
|
||||
*/
|
||||
External (\_SB_.PCI0, DeviceObj)
|
||||
|
||||
Scope (\_SB.PCI0)
|
||||
{
|
||||
Name (BUSN, Package (0x04)
|
||||
{
|
||||
0x11111111,
|
||||
0x22222222,
|
||||
0x33333333,
|
||||
0x44444444
|
||||
})
|
||||
Name (MMIO, Package (0x10)
|
||||
{
|
||||
0x11111111,
|
||||
0x22222222,
|
||||
0x33333333,
|
||||
0x44444444,
|
||||
0x55555555,
|
||||
0x66666666,
|
||||
0x77777777,
|
||||
0x88888888,
|
||||
0x99999999,
|
||||
0xaaaaaaaa,
|
||||
0xbbbbbbbb,
|
||||
0xcccccccc,
|
||||
0xdddddddd,
|
||||
0xeeeeeeee,
|
||||
0x11111111,
|
||||
0x22222222
|
||||
})
|
||||
Name (PCIO, Package (0x08)
|
||||
{
|
||||
0x77777777,
|
||||
0x88888888,
|
||||
0x99999999,
|
||||
0xaaaaaaaa,
|
||||
0xbbbbbbbb,
|
||||
0xcccccccc,
|
||||
0xdddddddd,
|
||||
0xeeeeeeee
|
||||
})
|
||||
Name (SBLK, 0x11)
|
||||
Name (TOM1, 0xaaaaaaaa)
|
||||
Name (SBDN, 0xbbbbbbbb)
|
||||
Name (HCLK, Package (0x08)
|
||||
{
|
||||
0x11111111,
|
||||
0x22222222,
|
||||
0x33333333,
|
||||
0x44444444,
|
||||
0x55555555,
|
||||
0x66666666,
|
||||
0x77777777,
|
||||
0x88888888
|
||||
})
|
||||
Name (HCDN, Package (0x08)
|
||||
{
|
||||
0x11111111,
|
||||
0x22222222,
|
||||
0x33333333,
|
||||
0x44444444,
|
||||
0x55555555,
|
||||
0x66666666,
|
||||
0x77777777,
|
||||
0x88888888
|
||||
})
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -1,26 +0,0 @@
|
|||
# This will make a target directory of ./VENDOR_MAINBOARD
|
||||
|
||||
target VENDOR_MAINBOARD
|
||||
mainboard VENDOR/MAINBOARD
|
||||
|
||||
option CC="CROSSCC"
|
||||
option CROSS_COMPILE="CROSS_PREFIX"
|
||||
option HOSTCC="CROSS_HOSTCC"
|
||||
|
||||
__COMPRESSION__
|
||||
|
||||
option DEFAULT_CONSOLE_LOGLEVEL=7
|
||||
option MAXIMUM_CONSOLE_LOGLEVEL=7
|
||||
|
||||
option ROM_SIZE = (1024*1024)
|
||||
option FALLBACK_SIZE = (1024*1024)
|
||||
|
||||
romimage "fallback"
|
||||
option USE_FALLBACK_IMAGE=1
|
||||
option ROM_IMAGE_SIZE=0x16100
|
||||
option XIP_ROM_SIZE=0x20000
|
||||
option COREBOOT_EXTRA_VERSION=".0-fallback"
|
||||
payload __PAYLOAD__
|
||||
end
|
||||
|
||||
buildrom ./coreboot.rom ROM_SIZE "fallback"
|
||||
|
|
@ -1,29 +0,0 @@
|
|||
# This will make a target directory of ./agami_aruma
|
||||
|
||||
target agami_aruma
|
||||
mainboard agami/aruma
|
||||
|
||||
option DEFAULT_CONSOLE_LOGLEVEL=8
|
||||
option MAXIMUM_CONSOLE_LOGLEVEL=8
|
||||
|
||||
#option DEFAULT_CONSOLE_LOGLEVEL=7
|
||||
#option MAXIMUM_CONSOLE_LOGLEVEL=7
|
||||
|
||||
romimage "normal"
|
||||
option ROM_SIZE = 512*1024-36*1024
|
||||
option USE_FALLBACK_IMAGE=0
|
||||
option ROM_IMAGE_SIZE=0x17000
|
||||
option XIP_ROM_SIZE=0x20000
|
||||
option COREBOOT_EXTRA_VERSION=".0-normal"
|
||||
payload ../../../../../../filo.elf
|
||||
end
|
||||
|
||||
romimage "fallback"
|
||||
option USE_FALLBACK_IMAGE=1
|
||||
option ROM_IMAGE_SIZE=0x17000
|
||||
option XIP_ROM_SIZE=0x20000
|
||||
option COREBOOT_EXTRA_VERSION=".0-fallback"
|
||||
payload ../../../../../../filo.elf
|
||||
end
|
||||
|
||||
buildrom ./coreboot.rom ROM_SIZE "normal" "fallback"
|
||||
|
|
@ -1,24 +0,0 @@
|
|||
# This will make a target directory of ./agami_aruma
|
||||
|
||||
target agami_aruma
|
||||
mainboard agami/aruma
|
||||
|
||||
#option DEFAULT_CONSOLE_LOGLEVEL=8
|
||||
#option MAXIMUM_CONSOLE_LOGLEVEL=8
|
||||
|
||||
option DEFAULT_CONSOLE_LOGLEVEL=7
|
||||
option MAXIMUM_CONSOLE_LOGLEVEL=7
|
||||
|
||||
option ROM_SIZE = (1024*1024)
|
||||
option FALLBACK_SIZE = (1024*1024)
|
||||
option CONFIG_COMPRESSED_PAYLOAD_LZMA = 1
|
||||
|
||||
romimage "fallback"
|
||||
option USE_FALLBACK_IMAGE=1
|
||||
option ROM_IMAGE_SIZE=0x14000
|
||||
option XIP_ROM_SIZE=0x20000
|
||||
option COREBOOT_EXTRA_VERSION=".0-big"
|
||||
payload ../../../../../../linux.elf
|
||||
end
|
||||
|
||||
buildrom ./coreboot.rom ROM_SIZE "fallback"
|
||||
|
|
@ -1,12 +0,0 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# script to generate rom image with builtin vga option rom.
|
||||
# call from freebios2/targets
|
||||
#
|
||||
rm -rf agami/aruma/agami_aruma
|
||||
./buildtarget agami/aruma/
|
||||
cd agami/aruma/agami_aruma
|
||||
make
|
||||
mv agami_aruma.rom agami_aruma_novga.rom
|
||||
cat ~/atiragexl.rom agami_aruma_novga.rom > agami_aruma.rom
|
||||
cd ../../..
|
||||
Loading…
Reference in New Issue