*/Makefile.inc: Compile files needed by uart8250 in x86 bootblock

These files provide symbols needed by console and uart drivers. This
was not an issue in the past, as we were not setting up a C
environment this early in the boot process.

Change-Id: Ied5106ac30a68971c8330e8f8270ab060994a89d
Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com>
Reviewed-on: https://review.coreboot.org/12869
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
This commit is contained in:
Alexandru Gagniuc 2015-10-06 16:35:07 -07:00 committed by Aaron Durbin
parent ee464b17ce
commit 66bbb3187e
3 changed files with 4 additions and 0 deletions

View File

@ -3,6 +3,7 @@ ramstage-y += lapic_cpu_init.c
ramstage-y += secondary.S
romstage-$(CONFIG_UDELAY_LAPIC) += apic_timer.c
ramstage-$(CONFIG_UDELAY_LAPIC) += apic_timer.c
bootblock-y += boot_cpu.c
verstage-y += boot_cpu.c
romstage-y += boot_cpu.c
ramstage-y += boot_cpu.c

View File

@ -10,6 +10,7 @@ smm-$(CONFIG_DEBUG_SMI) += util.c
# be located in the soc/ or cpu/ directories instead of here.
ifeq ($(CONFIG_DRIVERS_UART_8250IO),y)
bootblock-y += uart8250io.c
verstage-y += uart8250io.c
romstage-y += uart8250io.c
ramstage-y += uart8250io.c
@ -17,6 +18,7 @@ smm-$(CONFIG_DEBUG_SMI) += uart8250io.c
endif
ifeq ($(CONFIG_DRIVERS_UART_8250MEM),y)
bootblock-y += uart8250mem.c
verstage-y += uart8250mem.c
romstage-y += uart8250mem.c
ramstage-y += uart8250mem.c

View File

@ -87,6 +87,7 @@ endif
romstage-y += compute_ip_checksum.c
ifeq ($(CONFIG_COMPILER_GCC),y)
bootblock-$(CONFIG_ARCH_BOOTBLOCK_X86_32) += gcc.c
verstage-$(CONFIG_ARCH_VERSTAGE_X86_32) += gcc.c
romstage-$(CONFIG_ARCH_ROMSTAGE_X86_32) += gcc.c
ramstage-$(CONFIG_ARCH_RAMSTAGE_X86_32) += gcc.c