Documentation: Add display panel specifics

Change-Id: If1a393578556d51499c700b68187034830d19215
Signed-off-by: Daniel Maslowski <daniel.maslowski@img.ly>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33265
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
This commit is contained in:
Daniel Maslowski 2019-06-06 12:46:49 +02:00 committed by Nico Huber
parent 45b137eab0
commit 66bcc3101e
3 changed files with 68 additions and 0 deletions

View File

@ -0,0 +1,64 @@
Display Panel Specifics
=======================
Timing Parameters
-----------------
From the binary file `edid` in the sys filesystem on Linux, the panel can be
identified. The exact path may differ slightly. Here is an example:
```sh
$ strings /sys/devices/pci0000:00/0000:00:02.0/drm/card0/card0-eDP-1/edid
@0 5
LG Display
LP140WF3-SPD1
```
To figure out the timing parameters, refer to the [Intel Programmer's Reference
Manuals](https://01.org/linuxgraphics/documentation/hardware-specification-prms)
and try to find the datasheet of the panel using the information from `edid`.
In the example above, you would search for `LP140WF3-SPD1`. Find a table listing
the power sequence timing parameters, which are usually named T[N] and also
referenced in Intel's respective registers listing. You need the values for
`PP_ON_DELAYS`, `PP_OFF_DELAYS` and `PP_DIVISOR` for your `devicetree.cb`:
```eval_rst
+-----------------------------+---------------------------------------+-----+
| Intel docs | devicetree.cb | eDP |
+-----------------------------+---------------------------------------+-----+
| Power up delay | `gpu_panel_power_up_delay` | T3 |
+-----------------------------+---------------------------------------+-----+
| Power on to backlight on | `gpu_panel_power_backlight_on_delay` | T7 |
+-----------------------------+---------------------------------------+-----+
| Power Down delay | `gpu_panel_power_down_delay` | T10 |
+-----------------------------+---------------------------------------+-----+
| Backlight off to power down | `gpu_panel_power_backlight_off_delay` | T9 |
+-----------------------------+---------------------------------------+-----+
| Power Cycle Delay | `gpu_panel_power_cycle_delay` | T12 |
+-----------------------------+---------------------------------------+-----+
```
Intel GPU Tools and VBT
-----------------------
The Intel GPU tools are in a package called either `intel-gpu-tools` or
`igt-gpu-tools` in most distributions of Linux-based operating systems.
In the coreboot `util/` directory, you can find `intelvbttool`.
From a running system, you can dump the register values directly:
```sh
$ intel_reg dump --all | grep PCH_PP
PCH_PP_STATUS (0x000c7200): 0x80000008
PCH_PP_CONTROL (0x000c7204): 0x00000007
PCH_PP_ON_DELAYS (0x000c7208): 0x07d00001
PCH_PP_OFF_DELAYS (0x000c720c): 0x01f40001
PCH_PP_DIVISOR (0x000c7210): 0x0004af06
```
You can obtain the timing values from a VBT (Video BIOS Table), which you can
dump from a vendor UEFI image:
```sh
$ intel_vbt_decode data.vbt | grep T3
Power Sequence: T3 2000 T7 10 T9 2000 T10 500 T12 5000
T3 optimization: no
```

View File

@ -55,6 +55,9 @@ follows:
GMA: Per Board Configuration GMA: Per Board Configuration
---------------------------- ----------------------------
In order to set up the display panel, see the
[display panel-specific documentation](/gfx/display-panel.md).
There are a few Kconfig symbols to consider. To indicate that a There are a few Kconfig symbols to consider. To indicate that a
board can initialize graphics through *libgfxinit*: board can initialize graphics through *libgfxinit*:

View File

@ -173,6 +173,7 @@ Contents:
* [Dealing with Untrusted Input in SMM](technotes/2017-02-dealing-with-untrusted-input-in-smm.md) * [Dealing with Untrusted Input in SMM](technotes/2017-02-dealing-with-untrusted-input-in-smm.md)
* [GPIO toggling in ACPI AML](acpi/gpio.md) * [GPIO toggling in ACPI AML](acpi/gpio.md)
* [Native Graphics Initialization with libgfxinit](gfx/libgfxinit.md) * [Native Graphics Initialization with libgfxinit](gfx/libgfxinit.md)
* [Display panel-specific documentation](gfx/display-panel.md)
* [Architecture-specific documentation](arch/index.md) * [Architecture-specific documentation](arch/index.md)
* [Northbridge-specific documentation](northbridge/index.md) * [Northbridge-specific documentation](northbridge/index.md)
* [System on Chip-specific documentation](soc/index.md) * [System on Chip-specific documentation](soc/index.md)