From 689c25b9d6bbd62875f1fb31dca5cc694b8e262f Mon Sep 17 00:00:00 2001 From: Gwendal Grignou Date: Wed, 27 Jan 2021 23:29:38 -0800 Subject: [PATCH] drivers/i2c: sx9310: Replace register map with descriptive names The current driver is using chip registers map to configure the SAR sensor, which is opaque, especially when the datasheet is not published widely. Use more descriptive names, as defined in Linux kernel documentation at https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/semtech%2Csx9310.yaml BUG=b:173341604 BRANCH=volteer TEST=Dump all tables, check semtech property: for i in $(find /sys/firmware/acpi/tables/ -type f) ; do f=$(basename $i); cat $i > /tmp/$f.dat ; iasl -d /tmp/$f.dat done In SSDT.dsl, we have: Package (0x06) { Package (0x02) { "semtech,cs0-ground", Zero }, Package (0x02) { "semtech,startup-sensor", Zero }, Package (0x02) { "semtech,proxraw-strength", Zero }, Package (0x02) { "semtech,avg-pos-strength", 0x0200 }, Package (0x02) { "semtech,combined-sensors", Package (0x03) { Zero, One, 0x02 } }, Package (0x02) { "semtech,resolution", "finest" } } Change-Id: I8d1c81b56eaeef1dbb0f73c1d74c3a20e8b2fd7b Signed-off-by: Gwendal Grignou Reviewed-on: https://review.coreboot.org/c/coreboot/+/50210 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh --- src/drivers/i2c/sx9310/chip.h | 44 +++++++++++-- src/drivers/i2c/sx9310/registers.h | 29 --------- src/drivers/i2c/sx9310/sx9310.c | 46 +++++++++++-- .../hatch/variants/hatch/overridetree.cb | 32 +++------- .../hatch/variants/mushu/overridetree.cb | 32 +++------- .../octopus/variants/bobba/overridetree.cb | 32 +++------- .../poppy/variants/nocturne/devicetree.cb | 64 ++++++------------- .../volteer/variants/halvor/overridetree.cb | 32 +++------- .../volteer/variants/malefor/overridetree.cb | 32 +++------- .../volteer/variants/trondo/overridetree.cb | 32 +++------- .../volteer/variants/volteer/overridetree.cb | 32 +++------- .../volteer/variants/volteer2/overridetree.cb | 31 +++------ .../volteer/variants/voxel/overridetree.cb | 32 +++------- 13 files changed, 177 insertions(+), 293 deletions(-) delete mode 100644 src/drivers/i2c/sx9310/registers.h diff --git a/src/drivers/i2c/sx9310/chip.h b/src/drivers/i2c/sx9310/chip.h index 96690e32b4..3dcbcc4c15 100644 --- a/src/drivers/i2c/sx9310/chip.h +++ b/src/drivers/i2c/sx9310/chip.h @@ -6,7 +6,18 @@ #include #include -#define REGISTER(NAME) uint8_t NAME +#define MAX_COMBINED_SENSORS_ENTRIES 4 + +enum sx9310_resolution { + SX9310_COARSEST = 1, + SX9310_VERY_COARSE, + SX9310_COARSE, + SX9310_MEDIUM_COARSE, + SX9310_MEDIUM, + SX9310_FINE, + SX9310_VERY_FINE, + SX9310_FINEST, +}; struct drivers_i2c_sx9310_config { /* Device Description */ @@ -23,9 +34,34 @@ struct drivers_i2c_sx9310_config { /* IO-APIC interrupt */ struct acpi_irq irq; -#include "registers.h" + + /* + * Registers definition in the kernel source tree at: + * Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml + */ + + /* When true, cs0 is the ground. 0 [default] is false. */ + uint32_t cs0_ground; + + /* Sensor used for start-up proximity detection: Default 0. */ + uint32_t startup_sensor; + + /* Raw Proximity filter strength: When not set, disabled. */ + uint32_t proxraw_strength; + + /* Average Proximity filter strength: When not set, disabled. */ + uint32_t avg_pos_strength; + + /* + * List of which sensors are combined and represented by CS3. + * Could be standalone (3) or combination of 0, 1, 2, 3. + * Driver default: CS0 + CS1. + */ + uint32_t combined_sensors_count; + uint32_t combined_sensors[MAX_COMBINED_SENSORS_ENTRIES]; + + /* Capacitance measure resolution. Driver default: "finest". */ + enum sx9310_resolution resolution; }; -#undef REGISTER - #endif /* __DRIVERS_I2C_SX9310_CHIP_H__ */ diff --git a/src/drivers/i2c/sx9310/registers.h b/src/drivers/i2c/sx9310/registers.h deleted file mode 100644 index 4744ae4c67..0000000000 --- a/src/drivers/i2c/sx9310/registers.h +++ /dev/null @@ -1,29 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ - -#ifndef REGISTER -#error "define REGISTER(NAME) before including this file" -#endif - -REGISTER(reg_prox_ctrl0); -REGISTER(reg_prox_ctrl1); -REGISTER(reg_prox_ctrl2); -REGISTER(reg_prox_ctrl3); -REGISTER(reg_prox_ctrl4); -REGISTER(reg_prox_ctrl5); -REGISTER(reg_prox_ctrl6); -REGISTER(reg_prox_ctrl7); -REGISTER(reg_prox_ctrl8); -REGISTER(reg_prox_ctrl9); -REGISTER(reg_prox_ctrl10); -REGISTER(reg_prox_ctrl11); -REGISTER(reg_prox_ctrl12); -REGISTER(reg_prox_ctrl13); -REGISTER(reg_prox_ctrl14); -REGISTER(reg_prox_ctrl15); -REGISTER(reg_prox_ctrl16); -REGISTER(reg_prox_ctrl17); -REGISTER(reg_prox_ctrl18); -REGISTER(reg_prox_ctrl19); -REGISTER(reg_sar_ctrl0); -REGISTER(reg_sar_ctrl1); -REGISTER(reg_sar_ctrl2); diff --git a/src/drivers/i2c/sx9310/sx9310.c b/src/drivers/i2c/sx9310/sx9310.c index 8dc57a2d98..d9e5a14c5b 100644 --- a/src/drivers/i2c/sx9310/sx9310.c +++ b/src/drivers/i2c/sx9310/sx9310.c @@ -12,9 +12,16 @@ #define I2C_SX9310_ACPI_ID "STH9310" #define I2C_SX9310_ACPI_NAME "Semtech SX9310" -#define REGISTER(NAME) acpi_dp_add_integer(dsd, \ - I2C_SX9310_ACPI_ID "," #NAME, \ - config->NAME) +static const char * const i2c_sx9310_resolution[] = { + [SX9310_COARSEST] = "coarsest", + [SX9310_VERY_COARSE] = "very-coarse", + [SX9310_COARSE] = "coarse", + [SX9310_MEDIUM_COARSE] = "medium-coarse", + [SX9310_MEDIUM] = "medium", + [SX9310_FINE] = "fine", + [SX9310_VERY_FINE] = "very-fine", + [SX9310_FINEST] = "finest", +}; static void i2c_sx9310_fill_ssdt(const struct device *dev) { @@ -27,6 +34,7 @@ static void i2c_sx9310_fill_ssdt(const struct device *dev) .resource = scope, }; struct acpi_dp *dsd; + struct acpi_dp *combined_sensors; if (!scope || !config) return; @@ -56,9 +64,35 @@ static void i2c_sx9310_fill_ssdt(const struct device *dev) /* DSD */ dsd = acpi_dp_new_table("_DSD"); -#include "registers.h" - acpi_dp_write(dsd); + /* + * Format describe in linux kernel documentation. See + * https://www.kernel.org/doc/Documentation/devicetree/bindings/iio/proximity/semtech%2Csx9310.yaml + */ + acpi_dp_add_integer(dsd, "semtech,cs0-ground", config->cs0_ground); + acpi_dp_add_integer(dsd, "semtech,startup-sensor", + config->startup_sensor); + acpi_dp_add_integer(dsd, "semtech,proxraw-strength", + config->proxraw_strength); + acpi_dp_add_integer(dsd, "semtech,avg-pos-strength", + config->avg_pos_strength); + + /* Add combined_sensors package */ + if (config->combined_sensors_count > 0) { + combined_sensors = acpi_dp_new_table("semtech,combined-sensors"); + for (int i = 0; + i < config->combined_sensors_count && + i < MAX_COMBINED_SENSORS_ENTRIES; ++i) { + acpi_dp_add_integer(combined_sensors, NULL, + config->combined_sensors[i]); + } + acpi_dp_add_array(dsd, combined_sensors); + } + if (config->resolution && config->resolution < ARRAY_SIZE(i2c_sx9310_resolution)) + acpi_dp_add_string(dsd, "semtech,resolution", + i2c_sx9310_resolution[config->resolution]); + + acpi_dp_write(dsd); acpigen_pop_len(); /* Device */ acpigen_pop_len(); /* Scope */ @@ -66,8 +100,6 @@ static void i2c_sx9310_fill_ssdt(const struct device *dev) config->desc ? : dev->chip_ops->name, dev_path(dev)); } -#undef REGISTER - static const char *i2c_sx9310_acpi_name(const struct device *dev) { static char name[5]; diff --git a/src/mainboard/google/hatch/variants/hatch/overridetree.cb b/src/mainboard/google/hatch/variants/hatch/overridetree.cb index 01afa16000..ca2eb04570 100644 --- a/src/mainboard/google/hatch/variants/hatch/overridetree.cb +++ b/src/mainboard/google/hatch/variants/hatch/overridetree.cb @@ -129,29 +129,15 @@ chip soc/intel/cannonlake register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A0)" register "speed" = "I2C_SPEED_FAST" register "uid" = "1" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end # I2C #3 diff --git a/src/mainboard/google/hatch/variants/mushu/overridetree.cb b/src/mainboard/google/hatch/variants/mushu/overridetree.cb index 74b3e1f4e8..71d339a99b 100644 --- a/src/mainboard/google/hatch/variants/mushu/overridetree.cb +++ b/src/mainboard/google/hatch/variants/mushu/overridetree.cb @@ -149,29 +149,15 @@ chip soc/intel/cannonlake register "irq_gpio" = "ACPI_GPIO_IRQ_LEVEL_LOW(GPP_A0)" register "speed" = "I2C_SPEED_FAST" register "uid" = "1" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end # I2C #3 diff --git a/src/mainboard/google/octopus/variants/bobba/overridetree.cb b/src/mainboard/google/octopus/variants/bobba/overridetree.cb index 73adfef9ab..0eff4353c9 100644 --- a/src/mainboard/google/octopus/variants/bobba/overridetree.cb +++ b/src/mainboard/google/octopus/variants/bobba/overridetree.cb @@ -121,29 +121,15 @@ chip soc/intel/apollolake register "desc" = ""SAR Proximity Sensor"" register "irq" = "ACPI_IRQ_LEVEL_LOW(GPIO_214_IRQ)" register "uid" = "1" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x11" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end # - I2C 1 diff --git a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb index 899990de0b..39e241eba3 100644 --- a/src/mainboard/google/poppy/variants/nocturne/devicetree.cb +++ b/src/mainboard/google/poppy/variants/nocturne/devicetree.cb @@ -311,30 +311,16 @@ chip soc/intel/skylake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D9_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" end end # I2C #1 device pci 15.2 off end # I2C #2 @@ -352,30 +338,16 @@ chip soc/intel/skylake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_D10_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "1" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" device i2c 28 on end + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" end end # I2C #5 device pci 19.2 on diff --git a/src/mainboard/google/volteer/variants/halvor/overridetree.cb b/src/mainboard/google/volteer/variants/halvor/overridetree.cb index 568ca73c3b..c875ee3866 100644 --- a/src/mainboard/google/volteer/variants/halvor/overridetree.cb +++ b/src/mainboard/google/volteer/variants/halvor/overridetree.cb @@ -82,29 +82,15 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end diff --git a/src/mainboard/google/volteer/variants/malefor/overridetree.cb b/src/mainboard/google/volteer/variants/malefor/overridetree.cb index 95dc3f7b45..00d609f702 100644 --- a/src/mainboard/google/volteer/variants/malefor/overridetree.cb +++ b/src/mainboard/google/volteer/variants/malefor/overridetree.cb @@ -69,29 +69,15 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end diff --git a/src/mainboard/google/volteer/variants/trondo/overridetree.cb b/src/mainboard/google/volteer/variants/trondo/overridetree.cb index 7169932ae4..a7de5ead31 100644 --- a/src/mainboard/google/volteer/variants/trondo/overridetree.cb +++ b/src/mainboard/google/volteer/variants/trondo/overridetree.cb @@ -39,29 +39,15 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end diff --git a/src/mainboard/google/volteer/variants/volteer/overridetree.cb b/src/mainboard/google/volteer/variants/volteer/overridetree.cb index f23ef76393..10e199ae4d 100644 --- a/src/mainboard/google/volteer/variants/volteer/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volteer/overridetree.cb @@ -155,29 +155,15 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end diff --git a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb index 916777c0a3..f517de246c 100644 --- a/src/mainboard/google/volteer/variants/volteer2/overridetree.cb +++ b/src/mainboard/google/volteer/variants/volteer2/overridetree.cb @@ -213,29 +213,14 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end diff --git a/src/mainboard/google/volteer/variants/voxel/overridetree.cb b/src/mainboard/google/volteer/variants/voxel/overridetree.cb index ed90069ab4..c1002ef752 100644 --- a/src/mainboard/google/volteer/variants/voxel/overridetree.cb +++ b/src/mainboard/google/volteer/variants/voxel/overridetree.cb @@ -177,29 +177,15 @@ chip soc/intel/tigerlake register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)" register "speed" = "I2C_SPEED_FAST" register "uid" = "0" - register "reg_prox_ctrl0" = "0x10" - register "reg_prox_ctrl1" = "0x00" - register "reg_prox_ctrl2" = "0x84" - register "reg_prox_ctrl3" = "0x0e" - register "reg_prox_ctrl4" = "0x07" - register "reg_prox_ctrl5" = "0xc6" - register "reg_prox_ctrl6" = "0x20" - register "reg_prox_ctrl7" = "0x0d" - register "reg_prox_ctrl8" = "0x8d" - register "reg_prox_ctrl9" = "0x43" - register "reg_prox_ctrl10" = "0x1f" - register "reg_prox_ctrl11" = "0x00" - register "reg_prox_ctrl12" = "0x00" - register "reg_prox_ctrl13" = "0x00" - register "reg_prox_ctrl14" = "0x00" - register "reg_prox_ctrl15" = "0x00" - register "reg_prox_ctrl16" = "0x00" - register "reg_prox_ctrl17" = "0x00" - register "reg_prox_ctrl18" = "0x00" - register "reg_prox_ctrl19" = "0x00" - register "reg_sar_ctrl0" = "0x50" - register "reg_sar_ctrl1" = "0x8a" - register "reg_sar_ctrl2" = "0x3c" + register "cs0_ground" = "0x0" + register "combined_sensors_count" = "3" + register "combined_sensors[0]" = "0" + register "combined_sensors[1]" = "1" + register "combined_sensors[2]" = "2" + register "resolution" = "SX9310_FINEST" + register "avg_pos_strength" = "512" + register "startup_sensor" = "0" + register "proxraw_strength" = "0" device i2c 28 on end end end