- First pass at getting the powerpc ports to compile

The static device tree is not built properly at all yet, but at least we get through it.
  FIXME (What is the proper way to handle add in boards?)
- Add generic div64 support and ppc div64 support
- Fix abuild so it properly generates the CC line when cross compiling.
- Add one more possible ppc cross compiler target


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1762 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Eric Biederman 2004-11-05 19:55:06 +00:00
parent cd51e6ad90
commit 692f2c7aed
9 changed files with 324 additions and 29 deletions

View File

@ -0,0 +1 @@
#include <arch-generic/div64.h>

View File

@ -9,12 +9,12 @@ initobject init.c
driver pci_bridge.c driver pci_bridge.c
arch ppc end arch ppc end
cpu ppc/ppc4xx end chip cpu/ppc/ppc4xx device pnp 0.0 on end end
## ##
## Include the secondary Configuration files ## Include the secondary Configuration files
## ##
southbridge winbond/w83c553 end chip southbridge/winbond/w83c553 device pnp 0.0 on end end
## ##
## Build the objects we have code for in this directory. ## Build the objects we have code for in this directory.

View File

@ -8,6 +8,41 @@ uses ISA_IO_BASE
uses ISA_MEM_BASE uses ISA_MEM_BASE
uses TTYS0_BASE uses TTYS0_BASE
uses _IO_BASE uses _IO_BASE
uses CPU_OPT
uses CROSS_COMPILE
uses HAVE_OPTION_TABLE
uses CONFIG_COMPRESS
uses CONFIG_CHIP_CONFIGURE
uses DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_USE_INIT
uses CONFIG_CONSOLE_SERIAL8250
uses TTYS0_BAUD TTYS0_DIV
uses NO_POST
uses CONFIG_IDE
uses CONFIG_FS_STREAM
uses CONFIG_FS_EXT2
uses CONFIG_FS_ISO9660
uses CONFIG_FS_FAT
uses AUTOBOOT_CMDLINE
uses CONFIG_SYS_CLK_FREQ
uses IDE_BOOT_DRIVE
#uses IDE_SWAB
uses IDE_OFFSET
uses ROM_SIZE
uses _RESET
uses _EXCEPTION_VECTORS
uses _ROMBASE
uses _ROMSTART
uses _RAMBASE
#uses _RAMSTART
uses EMBEDDED_RAM_SIZE
uses STACK_SIZE HEAP_SIZE
uses MAINBOARD
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
uses LINUXBIOS_EXTRA_VERSION
uses CROSS_COMPILE uses CROSS_COMPILE
uses CC uses CC
uses HOSTCC uses HOSTCC
@ -33,3 +68,74 @@ default _IO_BASE=ISA_IO_BASE
## ##
default TTYS0_BASE=0xef600300-ISA_IO_BASE default TTYS0_BASE=0xef600300-ISA_IO_BASE
## Enable PPC405 instructions
default CPU_OPT="-Wa,-m405"
default CPU_OPT=""
## Use stage 1 initialization code
default CONFIG_USE_INIT=1
## Use chip configuration
default CONFIG_CHIP_CONFIGURE=1
## We don't use compressed image
default CONFIG_COMPRESS=0
## Turn off POST codes
default NO_POST=1
## Enable serial console
default DEFAULT_CONSOLE_LOGLEVEL=8
default CONFIG_CONSOLE_SERIAL8250=1
# Divisor of 69 == 9600 baud due to weird clocking
default TTYS0_DIV=69
default TTYS0_BAUD=9600
## Boot linux from IDE
default CONFIG_IDE=1
default CONFIG_FS_STREAM=1
default CONFIG_FS_EXT2=1
default CONFIG_FS_ISO9660=1
default CONFIG_FS_FAT=1
default AUTOBOOT_CMDLINE="hda1:/vmlinuz"
default ROM_SIZE=1048576
## Board has fixed size RAM
default EMBEDDED_RAM_SIZE=64*1024*1024
## LinuxBIOS C code runs at this location in RAM
default _RAMBASE=0x00100000
##
## Use a 64K stack
##
default STACK_SIZE=0x10000
##
## Use a 64K heap
##
default HEAP_SIZE=0x10000
##
## System clock
##
default CONFIG_SYS_CLK_FREQ=33
##
default _ROMBASE=0xfff00000
## Reset vector address
default _RESET=0xfffffffc
## Exception vectors
default _EXCEPTION_VECTORS=_ROMBASE+0x100
## linuxBIOS ROM start address
default _ROMSTART=0xfff03000
## linuxBIOS C code runs at this location in RAM
default _RAMBASE=0x00100000
### End Options.lb
end

View File

@ -20,30 +20,30 @@ object clock.o
arch ppc end arch ppc end
if CONFIG_SANDPOINT_ALTIMUS if CONFIG_SANDPOINT_ALTIMUS
pmc altimus/mpc7410 end chip pmc/altimus/mpc7410 device pnp 0.0 on end end
# pmc altimus/mpc7400 end # chip pmc/altimus/mpc7400 device pnp 0.0 on end end
# pmc altimus/mpc75x end # chip pmc/altimus/mpc75x device pnp 0.0 on end end
end end
if CONFIG_SANDPOINT_TALUS if CONFIG_SANDPOINT_TALUS
pmc talus/mpc74x end chip pmc/talus/mpc74x device pnp 0.0 on end end
pmc talus/mpc603 end chip pmc/talus/mpc603 device pnp 0.0 on end end
end end
if CONFIG_SANDPOINT_UNITY if CONFIG_SANDPOINT_UNITY
pmc unity/mpc824x end chip pmc/unity/mpc824x device pnp 0.0 on end end
end end
if CONFIG_SANDPOINT_VALIS if CONFIG_SANDPOINT_VALIS
pmc valis/mpc745x end chip pmc/valis/mpc745x device pnp 0.0 on end end
end end
if CONFIG_SANDPOINT_GYRUS if CONFIG_SANDPOINT_GYRUS
pmc gyrus/mpc744x end chip pmc/gyrus/mpc744x device pnp 0.0 on end end
end end
## ##
## Include the secondary Configuration files ## Include the secondary Configuration files
## ##
southbridge winbond/w83c553 end chip southbridge/winbond/w83c553 device pnp 0.0 on end end
superio NSC/pc97307 end chip superio/NSC/pc97307 device pnp 0.0 on end end
## ##
## Build the objects we have code for in this directory. ## Build the objects we have code for in this directory.

View File

@ -10,6 +10,39 @@ uses PCIC0_CFGDATA
uses PNP_CFGADDR uses PNP_CFGADDR
uses PNP_CFGDATA uses PNP_CFGDATA
uses _IO_BASE uses _IO_BASE
uses CROSS_COMPILE
uses HAVE_OPTION_TABLE
uses CONFIG_SANDPOINT_ALTIMUS
uses CONFIG_COMPRESS
uses DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_USE_INIT
uses CONFIG_CHIP_CONFIGURE
uses NO_POST
uses CONFIG_CONSOLE_SERIAL8250
uses TTYS0_BASE
uses CONFIG_IDE
uses CONFIG_FS_STREAM
uses CONFIG_FS_EXT2
uses CONFIG_FS_ISO9660
uses CONFIG_FS_FAT
uses AUTOBOOT_CMDLINE
uses PAYLOAD_SIZE
uses ROM_SIZE
uses ROM_IMAGE_SIZE
uses _RESET
uses _EXCEPTION_VECTORS
uses _ROMBASE
uses _ROMSTART
uses _RAMBASE
uses _RAMSTART
uses STACK_SIZE
uses HEAP_SIZE
uses MAINBOARD
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
uses LINUXBIOS_EXTRA_VERSION
uses CROSS_COMPILE uses CROSS_COMPILE
uses CC uses CC
uses HOSTCC uses HOSTCC
@ -25,3 +58,65 @@ default PCIC0_CFGDATA=0xfee00000
default PNP_CFGADDR=0x15c default PNP_CFGADDR=0x15c
default PNP_CFGDATA=0x15d default PNP_CFGDATA=0x15d
default _IO_BASE=ISA_IO_BASE default _IO_BASE=ISA_IO_BASE
## use a cross compiler
#default CROSS_COMPILE="powerpc-eabi-"
#default CROSS_COMPILE="ppc_74xx-"
## Use stage 1 initialization code
default CONFIG_USE_INIT=1
## Use static configuration
default CONFIG_CHIP_CONFIGURE=1
## We don't use compressed image
default CONFIG_COMPRESS=0
## Turn off POST codes
default NO_POST=1
## Enable serial console
default DEFAULT_CONSOLE_LOGLEVEL=8
default CONFIG_CONSOLE_SERIAL8250=1
default TTYS0_BASE=0x3f8
## Load payload using filo
default CONFIG_IDE=1
default CONFIG_FS_STREAM=1
default CONFIG_FS_EXT2=1
default CONFIG_FS_ISO9660=1
default CONFIG_FS_FAT=1
default AUTOBOOT_CMDLINE="hdc1:/vmlinuz"
# LinuxBIOS must fit into 128KB
default ROM_IMAGE_SIZE=131072
default ROM_SIZE={ROM_IMAGE_SIZE+PAYLOAD_SIZE}
default PAYLOAD_SIZE=262144
# Set stack and heap sizes (stage 2)
default STACK_SIZE=0x10000
default HEAP_SIZE=0x10000
# Sandpoint Demo Board
## Base of ROM
default _ROMBASE=0xfff00000
## Sandpoint reset vector
default _RESET=_ROMBASE+0x100
## Exception vectors (other than reset vector)
default _EXCEPTION_VECTORS=_RESET+0x100
## Start of linuxBIOS in the boot rom
## = _RESET + exeception vector table size
default _ROMSTART=_RESET+0x3100
## LinuxBIOS C code runs at this location in RAM
default _RAMBASE=0x00100000
default _RAMSTART=0x00100000
default CONFIG_SANDPOINT_ALTIMUS=1
### End Options.lb
end

View File

@ -16,17 +16,17 @@ object clock.o
arch ppc end arch ppc end
if CONFIG_BRIQ_750FX if CONFIG_BRIQ_750FX
cpu ppc/ppc7xx end chip cpu/ppc/ppc7xx device pnp 0.0 on end end
end end
if CONFIG_BRIQ_7400 if CONFIG_BRIQ_7400
cpu ppc/mpc74xx end chip cpu/ppc/mpc74xx device pnp 0.0 on end end
end end
## ##
## Include the secondary Configuration files ## Include the secondary Configuration files
## ##
northbridge ibm/cpc710 end chip northbridge/ibm/cpc710 device pnp 0.0 on end end
southbridge winbond/w83c553 end chip southbridge/winbond/w83c553 device pnp 0.0 on end end
## ##
## Build the objects we have code for in this directory. ## Build the objects we have code for in this directory.

View File

@ -12,6 +12,32 @@ uses PCIC0_CFGADDR
uses PCIC0_CFGDATA uses PCIC0_CFGDATA
uses _IO_BASE uses _IO_BASE
uses CROSS_COMPILE uses CROSS_COMPILE
uses HAVE_OPTION_TABLE
uses CONFIG_COMPRESS
uses DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_USE_INIT
uses NO_POST
uses CONFIG_CONSOLE_SERIAL8250
uses CONFIG_IDE_STREAM
uses IDE_BOOT_DRIVE
uses IDE_SWAB IDE_OFFSET
uses ROM_SIZE
uses _RESET
uses _EXCEPTION_VECTORS
uses _ROMBASE
uses _ROMSTART
uses _RAMBASE
uses _RAMSTART
uses STACK_SIZE
uses HEAP_SIZE
uses CONFIG_BRIQ_750FX
uses CONFIG_BRIQ_7400
uses MAINBOARD
uses MAINBOARD_VENDOR
uses MAINBOARD_PART_NUMBER
uses LINUXBIOS_EXTRA_VERSION
uses CROSS_COMPILE
uses CC uses CC
uses HOSTCC uses HOSTCC
uses OBJCOPY uses OBJCOPY
@ -33,3 +59,57 @@ default TTYS0_DIV=4
## Set UART base address ## Set UART base address
## ##
default TTYS0_BASE=0x3f8 default TTYS0_BASE=0x3f8
## use a cross compiler
#default CROSS_COMPILE="powerpc-eabi-"
#default CROSS_COMPILE="ppc_74xx-"
## Use stage 1 initialization code
default CONFIG_USE_INIT=1
## We don't use compressed image
default CONFIG_COMPRESS=0
## Turn off POST codes
default NO_POST=1
## Enable serial console
default DEFAULT_CONSOLE_LOGLEVEL=8
default CONFIG_CONSOLE_SERIAL8250=1
## Boot linux from IDE
default CONFIG_IDE_STREAM=1
default IDE_BOOT_DRIVE=0
default IDE_SWAB=1
default IDE_OFFSET=0
# ROM is 1Mb
default ROM_SIZE=1048576
# Set stack and heap sizes (stage 2)
default STACK_SIZE=0x10000
default HEAP_SIZE=0x10000
# Sandpoint Demo Board
## Base of ROM
default _ROMBASE=0xfff00000
## Sandpoint reset vector
default _RESET=_ROMBASE+0x100
## Exception vectors (other than reset vector)
default _EXCEPTION_VECTORS=_RESET+0x100
## Start of linuxBIOS in the boot rom
## = _RESET + exeception vector table size
default _ROMSTART=_RESET+0x3100
## LinuxBIOS C code runs at this location in RAM
default _RAMBASE=0x00100000
default _RAMSTART=0x00100000
default CONFIG_BRIQ_750FX=1
#default CONFIG_BRIQ_7400=1
### End Options.lb
end

View File

@ -1,12 +1,12 @@
## ##
## CPU initialization ## CPU initialization
## ##
cpu ppc/mpc74xx end chip cpu/ppc/mpc74xx device pnp 0.0 on end end
## ##
## Include the secondary Configuration files ## Include the secondary Configuration files
## ##
northbridge motorola/mpc107 end chip northbridge/motorola/mpc107 device pnp 0.0 on end end
## ##
## Build the objects we have code for in this directory. ## Build the objects we have code for in this directory.

View File

@ -64,6 +64,7 @@ function create_config
{ {
VENDOR=$1 VENDOR=$1
MAINBOARD=$2 MAINBOARD=$2
TARCH=$( architecture $VENDOR $MAINBOARD )
echo -n " Creating config file..." echo -n " Creating config file..."
mkdir -p $TARGET mkdir -p $TARGET
( cat << EOF ( cat << EOF
@ -76,6 +77,9 @@ option CC="CROSSCC"
option CROSS_COMPILE="CROSS_PREFIX" option CROSS_COMPILE="CROSS_PREFIX"
option HOSTCC="CROSS_HOSTCC" option HOSTCC="CROSS_HOSTCC"
EOF
if [ $TARCH == i386 ] ; then
cat <<EOF
romimage "normal" romimage "normal"
option USE_FALLBACK_IMAGE=0 option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x12000 option ROM_IMAGE_SIZE=0x12000
@ -89,9 +93,17 @@ romimage "fallback"
option LINUXBIOS_EXTRA_VERSION=".0-fallback" option LINUXBIOS_EXTRA_VERSION=".0-fallback"
payload PAYLOAD payload PAYLOAD
end end
buildrom ./linuxbios.rom ROM_SIZE "normal" "fallback"
buildrom ./VENDOR_MAINBOARD.rom ROM_SIZE "normal" "fallback"
EOF EOF
else
cat <<EOF
romimage "only"
option LINUXBIOS_EXTRA_VERSION=".0"
payload PAYLOAD
end
buildrom ./linuxbios.rom ROM_SIZE "only"
EOF
fi
) | sed -e s,VENDOR,$VENDOR,g \ ) | sed -e s,VENDOR,$VENDOR,g \
-e s,MAINBOARD,$MAINBOARD,g \ -e s,MAINBOARD,$MAINBOARD,g \
-e s,PAYLOAD,$PAYLOAD,g \ -e s,PAYLOAD,$PAYLOAD,g \
@ -199,9 +211,9 @@ function build_target
TARCH=$( architecture $VENDOR $MAINBOARD ) TARCH=$( architecture $VENDOR $MAINBOARD )
# default setting # default setting
CC="gcc" CC='$(CROSS_COMPILE)gcc'
HOSTCC="gcc" HOSTCC='gcc'
CROSS_COMPILE="" CROSS_COMPILE=''
echo -n "Processing mainboard/$VENDOR/$MAINBOARD" echo -n "Processing mainboard/$VENDOR/$MAINBOARD"
@ -218,7 +230,7 @@ function build_target
found_crosscompiler=true found_crosscompiler=true
fi fi
if [ "$found_crosscompiler" == "false" -a "$TARCH" == ppc ] ;then if [ "$found_crosscompiler" == "false" -a "$TARCH" == ppc ] ;then
for prefix in powerpc-eabi- powerpc-linux- ; do for prefix in powerpc-eabi- powerpc-linux- ppc_74xx- ; do
if ${prefix}gcc --version > /dev/null 2> /dev/null ; then if ${prefix}gcc --version > /dev/null 2> /dev/null ; then
found_crosscompiler=true found_crosscompiler=true
CROSS_COMPILE=$prefix CROSS_COMPILE=$prefix
@ -235,7 +247,7 @@ function build_target
echo echo
return 0 return 0
else else
echo " ($TARCH: ok, though we're $ARCH)" echo " ($TARCH: ok, we're $ARCH)"
fi fi
fi fi
@ -323,6 +335,7 @@ while true ; do
esac esac
done done
# /path/to/freebios2/
test -z "$1" || LBROOT=$1 test -z "$1" || LBROOT=$1
debug "LBROOT=$LBROOT" debug "LBROOT=$LBROOT"