GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

northbridge/haswell: clean up native graphics init code 

Clean up NGI code now that libgfxinit has replaced old C code:

- replace #if preprocessor guards with if (IS_ENABLED(...))
- don't guard variable declarations
- remove code that would only be executed for old NGI / isn't
  used by libgfxinit

Test: boot google/wolf with VBIOS, NGI, and UEFI/GOP video init,
observe payload and pre-OS graphics display functional.

Change-Id: I96e74f49ea70e09cbac6f8af561de3e18fa7d260
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/19327
Tested-by: build bot (Jenkins)
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
This commit is contained in:
Matt DeVillier 2017-04-16 01:42:44 -05:00 committed by Martin Roth
parent ee049fa802
commit 6955b9c5b2
1 changed files with 19 additions and 36 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
src/northbridge/intel/haswell/gma.c
View File

@ -216,13 +216,14 @@ static void power_well_enable(void)
{
gtt_write(HSW_PWR_WELL_CTL1, HSW_PWR_WELL_ENABLE);
gtt_poll(HSW_PWR_WELL_CTL1, HSW_PWR_WELL_STATE, HSW_PWR_WELL_STATE);
#if CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT
/* In the native graphics case, we've got about 20 ms.
* after we power up the the AUX channel until we can talk to it.
* So get that going right now. We can't turn on the panel, yet, just VDD.
*/
if (IS_ENABLED(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT)) {
gtt_write(PCH_PP_CONTROL, PCH_PP_UNLOCK| EDP_FORCE_VDD | PANEL_POWER_RESET);
#endif
}
}
static void gma_pm_init_pre_vbios(struct device *dev)
@ -422,13 +423,15 @@ static void gma_pm_init_post_vbios(struct device *dev)
static void gma_func0_init(struct device *dev)
{
#if CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT
struct northbridge_intel_haswell_config *conf = dev->chip_info;
struct intel_dp dp;
#endif
int lightup_ok = 0;
u32 reg32;
u64 physbase;
const struct resource *const linearfb_res =
find_resource(dev, PCI_BASE_ADDRESS_2);
if (!linearfb_res || !linearfb_res->base)
return;
/* IGD needs to be Bus Master */
reg32 = pci_read_config32(dev, PCI_COMMAND);
reg32 |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
@ -437,44 +440,24 @@ static void gma_func0_init(struct device *dev)
/* Init graphics power management */
gma_pm_init_pre_vbios(dev);
/* Post VBIOS init */
/* Pre panel init */
gma_setup_panel(dev);
#if CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT
if (IS_ENABLED(CONFIG_MAINBOARD_DO_NATIVE_VGA_INIT)) {
printk(BIOS_SPEW, "NATIVE graphics, run native enable\n");
/* Default set to 1 since it might be required for
stuff like seabios */
unsigned int init_fb = 1;
/* the BAR for graphics space is a well known number for
* sandy and ivy. And the resource code renumbers it.
* So it's almost like having two hardcodes.
*/
dp.graphics = (void *)((uintptr_t)dev->resource_list[1].base);
dp.physbase = pci_read_config32(dev, 0x5c) & ~0xf;
dp.panel_power_down_delay = conf->gpu_panel_power_down_delay;
dp.panel_power_up_delay = conf->gpu_panel_power_up_delay;
dp.panel_power_cycle_delay = conf->gpu_panel_power_cycle_delay;
#if IS_ENABLED(CONFIG_CHROMEOS)
init_fb = display_init_required();
#endif
if (IS_ENABLED(CONFIG_MAINBOARD_USE_LIBGFXINIT)) {
gma_gfxinit(gtt_res->base, (u32)dp.graphics,
dp.physbase, &lightup_ok);
} else {
lightup_ok = panel_lightup(&dp, init_fb);
physbase = pci_read_config32(dev, 0x5c) & ~0xf;
gma_gfxinit(gtt_res->base, linearfb_res->base,
physbase, &lightup_ok);
gfx_set_init_done(1);
}
gfx_set_init_done(1);
#endif
if (! lightup_ok) {
printk(BIOS_SPEW, "FUI did not run; using VBIOS\n");
mdelay(CONFIG_PRE_GRAPHICS_DELAY);
pci_dev_init(dev);
}
/* Post VBIOS init */
/* Post panel init */
gma_pm_init_post_vbios(dev);
}