diff --git a/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c b/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c index d4f44c0d93..f5cd846183 100644 --- a/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c +++ b/src/mainboard/amd/serengeti_cheetah/get_bus_conf.c @@ -15,11 +15,10 @@ // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables struct mb_sysconf_t mb_sysconf; -static unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, +static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -27,8 +26,8 @@ static unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -static unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, // 0x20202020, @@ -39,39 +38,37 @@ static unsigned hcdnx[] = // 0x20202020, }; - - static unsigned get_bus_conf_done = 0; static unsigned get_hcid(unsigned i) { - unsigned id = 0; + unsigned id = 0; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; - device_t dev; + device_t dev; - dev = dev_find_slot(busn, PCI_DEVFN(devn,0)); + dev = dev_find_slot(busn, PCI_DEVFN(devn, 0)); - switch (dev->device) { - case 0x7458: //8132 - id = 1; - break; - case 0x7454: //8151 - id = 2; + switch (dev->device) { + case 0x7458: //8132 + id = 1; break; - case 0x7450: //8131 - id = 3; - break; - } + case 0x7454: //8151 + id = 2; + break; + case 0x7450: //8131 + id = 3; + break; + } - // we may need more way to find out hcid: subsystem id? GPIO read ? + // we may need more way to find out hcid: subsystem id? GPIO read ? - // we need use id for 1. bus num, 2. mptable, 3. acpi table + // we need use id for 1. bus num, 2. mptable, 3. acpi table - return id; + return id; } void get_bus_conf(void) @@ -79,11 +76,12 @@ void get_bus_conf(void) unsigned apicid_base; - device_t dev; + device_t dev; int i, j; struct mb_sysconf_t *m; - if(get_bus_conf_done == 1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once get_bus_conf_done = 1; @@ -92,7 +90,7 @@ void get_bus_conf(void) m = sysconf.mb; sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;ibus_8132_0 = (sysconf.pci1234[0] >> 16) & 0xff; m->bus_8111_0 = m->bus_8132_0; - /* 8111 */ - dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); - } + /* 8111 */ + dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn, 0)); + if (dev) { + m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8111_0, sysconf.sbdn); + } - /* 8132-1 */ - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3,0)); - if (dev) { - m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); - } + /* 8132-1 */ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3, 0)); + if (dev) { + m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8132_0, m->sbdn3); + } - /* 8132-2 */ - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1,0)); - if (dev) { - m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); - } + /* 8132-2 */ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3 + 1, 0)); + if (dev) { + m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8132_0, m->sbdn3 + 1); + } - /* HT chain 1 */ - j=0; - for(i=1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; + /* HT chain 1 */ + j = 0; + for (i = 1; i < sysconf.hc_possible_num; i++) { + if (!(sysconf.pci1234[i] & 0x1)) + continue; - // check hcid type here - sysconf.hcid[i] = get_hcid(i); + // check hcid type here + sysconf.hcid[i] = get_hcid(i); - switch(sysconf.hcid[i]) { + switch (sysconf.hcid[i]) { - case 1: //8132 - case 3: //8131 + case 1: //8132 + case 3: //8131 - m->bus_8132a[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; + m->bus_8132a[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; - m->sbdn3a[j] = sysconf.hcdn[i] & 0xff; + m->sbdn3a[j] = sysconf.hcdn[i] & 0xff; - /* 8132-1 */ - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j],0)); - if (dev) { - m->bus_8132a[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]); - } + /* 8132-1 */ + dev = + dev_find_slot(m->bus_8132a[j][0], + PCI_DEVFN(m->sbdn3a[j], 0)); + if (dev) { + m->bus_8132a[j][1] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8132a[j][0], m->sbdn3a[j]); + } - /* 8132-2 */ - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1,0)); - if (dev) { - m->bus_8132a[j][2] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1); - } + /* 8132-2 */ + dev = + dev_find_slot(m->bus_8132a[j][0], + PCI_DEVFN(m->sbdn3a[j] + 1, 0)); + if (dev) { + m->bus_8132a[j][2] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8132a[j][0], m->sbdn3a[j] + 1); + } - break; + break; - case 2: //8151 + case 2: //8151 - m->bus_8151[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; - m->sbdn5[j] = sysconf.hcdn[i] & 0xff; - /* 8151 */ - dev = dev_find_slot(m->bus_8151[j][0], PCI_DEVFN(m->sbdn5[j]+1, 0)); + m->bus_8151[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; + m->sbdn5[j] = sysconf.hcdn[i] & 0xff; + /* 8151 */ + dev = + dev_find_slot(m->bus_8151[j][0], + PCI_DEVFN(m->sbdn5[j] + 1, 0)); - if (dev) { - m->bus_8151[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - // printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151[j][1]); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1); - } + if (dev) { + m->bus_8151[j][1] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + // printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151[j][1]); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8151[j][0], m->sbdn5[j] + 1); + } - break; - } - - j++; - } + break; + } + j++; + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -197,12 +210,12 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - m->apicid_8111 = apicid_base+0; - m->apicid_8132_1 = apicid_base+1; - m->apicid_8132_2 = apicid_base+2; - for(i=0;iapicid_8132a[i][0] = apicid_base + 3 + i*2; - m->apicid_8132a[i][1] = apicid_base + 3 + i*2 + 1; - } + m->apicid_8111 = apicid_base + 0; + m->apicid_8132_1 = apicid_base + 1; + m->apicid_8132_2 = apicid_base + 2; + for (i = 0; i < j; i++) { + m->apicid_8132a[i][0] = apicid_base + 3 + i * 2; + m->apicid_8132a[i][1] = apicid_base + 3 + i * 2 + 1; + } } diff --git a/src/mainboard/asus/m2n-e/get_bus_conf.c b/src/mainboard/asus/m2n-e/get_bus_conf.c index 18de8ecae3..fd7d30476b 100644 --- a/src/mainboard/asus/m2n-e/get_bus_conf.c +++ b/src/mainboard/asus/m2n-e/get_bus_conf.c @@ -85,7 +85,7 @@ void get_bus_conf(void) get_sblk_pci1234(); - sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */ + sysconf.sbdn = (sysconf.hcdn[0] & 0xff); /* First byte of first chain */ sbdn = sysconf.sbdn; for (i = 0; i < 8; i++) diff --git a/src/mainboard/broadcom/blast/get_bus_conf.c b/src/mainboard/broadcom/blast/get_bus_conf.c index 36959a4a7b..5de8952dc2 100644 --- a/src/mainboard/broadcom/blast/get_bus_conf.c +++ b/src/mainboard/broadcom/blast/get_bus_conf.c @@ -10,7 +10,6 @@ #include #include - // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default unsigned char bus_bcm5780[7]; @@ -19,11 +18,9 @@ unsigned char bus_bcm5785_1 = 8; unsigned char bus_bcm5785_1_1 = 9; unsigned apicid_bcm5785[3]; - -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -32,9 +29,9 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, @@ -43,10 +40,9 @@ unsigned hcdnx[] = // 0x20202020, // 0x20202020, }; + unsigned sbdn2; - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) @@ -54,51 +50,56 @@ void get_bus_conf(void) unsigned apicid_base; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 8) & 0xff; - sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; bus_bcm5780[0] = bus_bcm5785_0; - /* bcm5785 */ - dev = dev_find_slot(bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - dev = dev_find_slot(bus_bcm5785_1, PCI_DEVFN(0x0d,0)); - if(dev) { - bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + /* bcm5785 */ + dev = dev_find_slot(bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn, 0)); + if (dev) { + bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + dev = dev_find_slot(bus_bcm5785_1, PCI_DEVFN(0x0d, 0)); + if (dev) { + bus_bcm5785_1_1 = + pci_read_config8(dev, PCI_SECONDARY_BUS); } - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:07.0, using defaults\n", bus_bcm5785_0); - } - - /* bcm5780 */ - for(i = 1; i < 7; i++) { - dev = dev_find_slot(bus_bcm5780[0], PCI_DEVFN(sbdn2 + i - 1,0)); - if(dev) { - bus_bcm5780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_bcm5780[i]); - } + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:07.0, using defaults\n", + bus_bcm5785_0); } + /* bcm5780 */ + for (i = 1; i < 7; i++) { + dev = + dev_find_slot(bus_bcm5780[0], PCI_DEVFN(sbdn2 + i - 1, 0)); + if (dev) { + bus_bcm5780[i] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:01.0, using defaults\n", + bus_bcm5780[i]); + } + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -106,6 +107,6 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - for(i=0;i<3;i++) - apicid_bcm5785[i] = apicid_base+i; + for (i = 0; i < 3; i++) + apicid_bcm5785[i] = apicid_base + i; } diff --git a/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c b/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c index d2de5ca7f0..9315cbd9ae 100644 --- a/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c +++ b/src/mainboard/gigabyte/ga_2761gxdk/get_bus_conf.c @@ -33,17 +33,14 @@ #include #include - // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default - unsigned char bus_sis966[8]; //1 - unsigned apicid_sis966; +unsigned char bus_sis966[8]; //1 +unsigned apicid_sis966; - -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -52,10 +49,10 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, -// 0x20202020, +// 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, @@ -72,51 +69,55 @@ void get_bus_conf(void) unsigned apicid_base; unsigned sbdn; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 16) & 0xff; - /* SIS966 */ - dev = dev_find_slot(bus_sis966[0], PCI_DEVFN(sbdn + 0x06,0)); - if (dev) { - bus_sis966[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_sis966[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_sis966[2]++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); + /* SIS966 */ + dev = dev_find_slot(bus_sis966[0], PCI_DEVFN(sbdn + 0x06, 0)); + if (dev) { + bus_sis966[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_sis966[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_sis966[2]++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x06); - bus_sis966[1] = 2; - bus_sis966[2] = 3; - } + bus_sis966[1] = 2; + bus_sis966[2] = 3; + } - for(i=2; i<8;i++) { - dev = dev_find_slot(bus_sis966[0], PCI_DEVFN(sbdn + 0x0a + i - 2 , 0)); - if (dev) { - bus_sis966[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } + for (i = 2; i < 8; i++) { + dev = + dev_find_slot(bus_sis966[0], + PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); + if (dev) { + bus_sis966[i] = + pci_read_config8(dev, PCI_SECONDARY_BUS); } - + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -124,6 +125,6 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_sis966 = apicid_base+0; + apicid_sis966 = apicid_base + 0; } diff --git a/src/mainboard/gigabyte/m57sli/get_bus_conf.c b/src/mainboard/gigabyte/m57sli/get_bus_conf.c index 80822556fe..c798415579 100644 --- a/src/mainboard/gigabyte/m57sli/get_bus_conf.c +++ b/src/mainboard/gigabyte/m57sli/get_bus_conf.c @@ -31,17 +31,14 @@ #include #include - // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; +unsigned char bus_mcp55[8]; //1 +unsigned apicid_mcp55; - -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -50,10 +47,10 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, -// 0x20202020, +// 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, @@ -70,51 +67,54 @@ void get_bus_conf(void) unsigned apicid_base; unsigned sbdn; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 16) & 0xff; - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06,0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); + /* MCP55 */ + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); + if (dev) { + bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_mcp55[2]++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x06); - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } + bus_mcp55[1] = 2; + bus_mcp55[2] = 3; + } - for(i=2; i<8;i++) { - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x0a + i - 2 , 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } + for (i = 2; i < 8; i++) { + dev = + dev_find_slot(bus_mcp55[0], + PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); + if (dev) { + bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); } - + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -122,6 +122,6 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_mcp55 = apicid_base+0; + apicid_mcp55 = apicid_base + 0; } diff --git a/src/mainboard/iwill/dk8_htx/get_bus_conf.c b/src/mainboard/iwill/dk8_htx/get_bus_conf.c index 4f63ff592f..8868f462d7 100644 --- a/src/mainboard/iwill/dk8_htx/get_bus_conf.c +++ b/src/mainboard/iwill/dk8_htx/get_bus_conf.c @@ -15,23 +15,22 @@ // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables struct mb_sysconf_t mb_sysconf; -static unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, // SB chain m - 0x0000000, // HTX - 0x0000100, // co processor on socket 1 +static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, // SB chain m + 0x0000000, // HTX + 0x0000100, // co processor on socket 1 // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0 }; -static unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, 0x20202020, 0x20202020, - 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, @@ -39,39 +38,37 @@ static unsigned hcdnx[] = // 0x20202020, }; - - static unsigned get_bus_conf_done = 0; static unsigned get_hcid(unsigned i) { - unsigned id = 0; + unsigned id = 0; - unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; + unsigned busn = (sysconf.pci1234[i] >> 16) & 0xff; - unsigned devn = sysconf.hcdn[i] & 0xff; + unsigned devn = sysconf.hcdn[i] & 0xff; - device_t dev; + device_t dev; - dev = dev_find_slot(busn, PCI_DEVFN(devn,0)); + dev = dev_find_slot(busn, PCI_DEVFN(devn, 0)); - switch (dev->device) { - case 0x7458: //8132 - id = 1; - break; - case 0x7454: //8151 - id = 2; + switch (dev->device) { + case 0x7458: //8132 + id = 1; break; - case 0x7450: //8131 - id = 3; - break; - } + case 0x7454: //8151 + id = 2; + break; + case 0x7450: //8131 + id = 3; + break; + } - // we may need more way to find out hcid: subsystem id? GPIO read ? + // we may need more way to find out hcid: subsystem id? GPIO read ? - // we need use id for 1. bus num, 2. mptable, 3. acpi table + // we need use id for 1. bus num, 2. mptable, 3. acpi table - return id; + return id; } void get_bus_conf(void) @@ -79,11 +76,12 @@ void get_bus_conf(void) unsigned apicid_base; - device_t dev; + device_t dev; int i, j; struct mb_sysconf_t *m; - if(get_bus_conf_done == 1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once get_bus_conf_done = 1; @@ -92,7 +90,7 @@ void get_bus_conf(void) m = sysconf.mb; sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;ibus_8132_0 = (sysconf.pci1234[0] >> 16) & 0xff; m->bus_8111_0 = m->bus_8132_0; - /* 8111 */ - dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8111_0, sysconf.sbdn); - } + /* 8111 */ + dev = dev_find_slot(m->bus_8111_0, PCI_DEVFN(sysconf.sbdn, 0)); + if (dev) { + m->bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8111_0, sysconf.sbdn); + } - /* 8132-1 */ - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3,0)); - if (dev) { - m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3); - } + /* 8132-1 */ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3, 0)); + if (dev) { + m->bus_8132_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8132_0, m->sbdn3); + } - /* 8132-2 */ - dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3+1,0)); - if (dev) { - m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132_0, m->sbdn3+1); - } + /* 8132-2 */ + dev = dev_find_slot(m->bus_8132_0, PCI_DEVFN(m->sbdn3 + 1, 0)); + if (dev) { + m->bus_8132_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8132_0, m->sbdn3 + 1); + } - /* HT chain 1 */ - j=0; - for(i=1; i< sysconf.hc_possible_num; i++) { - if(!(sysconf.pci1234[i] & 0x1) ) continue; + /* HT chain 1 */ + j = 0; + for (i = 1; i < sysconf.hc_possible_num; i++) { + if (!(sysconf.pci1234[i] & 0x1)) + continue; - // check hcid type here - sysconf.hcid[i] = get_hcid(i); + // check hcid type here + sysconf.hcid[i] = get_hcid(i); - switch(sysconf.hcid[i]) { + switch (sysconf.hcid[i]) { - case 1: //8132 - case 3: //8131 + case 1: //8132 + case 3: //8131 - m->bus_8132a[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; + m->bus_8132a[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; - m->sbdn3a[j] = sysconf.hcdn[i] & 0xff; + m->sbdn3a[j] = sysconf.hcdn[i] & 0xff; - /* 8132-1 */ - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j],0)); - if (dev) { - m->bus_8132a[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]); - } + /* 8132-1 */ + dev = + dev_find_slot(m->bus_8132a[j][0], + PCI_DEVFN(m->sbdn3a[j], 0)); + if (dev) { + m->bus_8132a[j][1] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8132a[j][0], m->sbdn3a[j]); + } - /* 8132-2 */ - dev = dev_find_slot(m->bus_8132a[j][0], PCI_DEVFN(m->sbdn3a[j]+1,0)); - if (dev) { - m->bus_8132a[j][2] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8132a[j][0], m->sbdn3a[j]+1); - } + /* 8132-2 */ + dev = + dev_find_slot(m->bus_8132a[j][0], + PCI_DEVFN(m->sbdn3a[j] + 1, 0)); + if (dev) { + m->bus_8132a[j][2] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8132a[j][0], m->sbdn3a[j] + 1); + } - break; + break; - case 2: //8151 + case 2: //8151 - m->bus_8151[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; - m->sbdn5[j] = sysconf.hcdn[i] & 0xff; - /* 8151 */ - dev = dev_find_slot(m->bus_8151[j][0], PCI_DEVFN(m->sbdn5[j]+1, 0)); + m->bus_8151[j][0] = (sysconf.pci1234[i] >> 16) & 0xff; + m->sbdn5[j] = sysconf.hcdn[i] & 0xff; + /* 8151 */ + dev = + dev_find_slot(m->bus_8151[j][0], + PCI_DEVFN(m->sbdn5[j] + 1, 0)); - if (dev) { - m->bus_8151[j][1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_8151[j][0], m->sbdn5[j]+1); - } + if (dev) { + m->bus_8151[j][1] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_8151[j][0], m->sbdn5[j] + 1); + } - break; - } - - j++; - } + break; + } + j++; + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -196,12 +209,12 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - m->apicid_8111 = apicid_base+0; - m->apicid_8132_1 = apicid_base+1; - m->apicid_8132_2 = apicid_base+2; - for(i=0;iapicid_8132a[i][0] = apicid_base + 3 + i*2; - m->apicid_8132a[i][1] = apicid_base + 3 + i*2 + 1; - } + m->apicid_8111 = apicid_base + 0; + m->apicid_8132_1 = apicid_base + 1; + m->apicid_8132_2 = apicid_base + 2; + for (i = 0; i < j; i++) { + m->apicid_8132a[i][0] = apicid_base + 3 + i * 2; + m->apicid_8132a[i][1] = apicid_base + 3 + i * 2 + 1; + } } diff --git a/src/mainboard/msi/ms9185/get_bus_conf.c b/src/mainboard/msi/ms9185/get_bus_conf.c index 7ed8600385..3a70d838dc 100644 --- a/src/mainboard/msi/ms9185/get_bus_conf.c +++ b/src/mainboard/msi/ms9185/get_bus_conf.c @@ -38,11 +38,10 @@ // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables struct mb_sysconf_t mb_sysconf; -static unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, +static unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -50,10 +49,10 @@ static unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -static unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, + +static unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, @@ -62,73 +61,77 @@ static unsigned hcdnx[] = // 0x20202020, }; - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) { - unsigned apicid_base; + unsigned apicid_base; - device_t dev; - int i; - struct mb_sysconf_t *m; + device_t dev; + int i; + struct mb_sysconf_t *m; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.mb = &mb_sysconf; + sysconf.mb = &mb_sysconf; - m = sysconf.mb; + m = sysconf.mb; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); + sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 8) & 0xff; - m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 + sysconf.sbdn = (sysconf.hcdn[0] >> 8) & 0xff; + m->sbdn2 = sysconf.hcdn[0] & 0xff; // bcm5780 - m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; - m->bus_bcm5780[0] = m->bus_bcm5785_0; + m->bus_bcm5785_0 = (sysconf.pci1234[0] >> 16) & 0xff; + m->bus_bcm5780[0] = m->bus_bcm5785_0; - /* bcm5785 */ - dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd,0)); - if(dev) { - m->bus_bcm5785_1_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5785_0, sysconf.sbdn); - } - - /* bcm5780 */ - for(i = 1; i < 7; i++) { - dev = dev_find_slot(m->bus_bcm5780[0], PCI_DEVFN(m->sbdn2 + i - 1,0)); - if(dev) { - m->bus_bcm5780[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_bcm5780[0], m->sbdn2+i-1); - } - } + /* bcm5785 */ + dev = dev_find_slot(m->bus_bcm5785_0, PCI_DEVFN(sysconf.sbdn, 0)); + if (dev) { + m->bus_bcm5785_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + dev = dev_find_slot(m->bus_bcm5785_1, PCI_DEVFN(0xd, 0)); + if (dev) { + m->bus_bcm5785_1_1 = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_bcm5785_0, sysconf.sbdn); + } + /* bcm5780 */ + for (i = 1; i < 7; i++) { + dev = + dev_find_slot(m->bus_bcm5780[0], + PCI_DEVFN(m->sbdn2 + i - 1, 0)); + if (dev) { + m->bus_bcm5780[i] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_bcm5780[0], m->sbdn2 + i - 1); + } + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(3); + apicid_base = get_apicid_base(3); #else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - for(i=0;i<3;i++) - m->apicid_bcm5785[i] = apicid_base+i; + for (i = 0; i < 3; i++) + m->apicid_bcm5785[i] = apicid_base + i; } diff --git a/src/mainboard/msi/ms9282/get_bus_conf.c b/src/mainboard/msi/ms9282/get_bus_conf.c index 091840f69c..4ab124d5fc 100644 --- a/src/mainboard/msi/ms9282/get_bus_conf.c +++ b/src/mainboard/msi/ms9282/get_bus_conf.c @@ -39,23 +39,22 @@ // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables struct mb_sysconf_t mb_sysconf; -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most - 0x20202020, - 0x20202020, - 0x20202020, + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, + 0x20202020, + 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, @@ -63,66 +62,69 @@ unsigned hcdnx[] = // 0x20202020, }; - - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) { - unsigned apicid_base; - struct mb_sysconf_t *m; + unsigned apicid_base; + struct mb_sysconf_t *m; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.mb = &mb_sysconf; + sysconf.mb = &mb_sysconf; - m = sysconf.mb; - memset(m, 0, sizeof(struct mb_sysconf_t)); + m = sysconf.mb; + memset(m, 0, sizeof(struct mb_sysconf_t)); - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;ibus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; + m->bus_mcp55[0] = (sysconf.pci1234[0] >> 16) & 0xff; - /* MCP55 */ - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06,0)); - if (dev) { - m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sysconf.sbdn + 0x06); - } + /* MCP55 */ + dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x06, 0)); + if (dev) { + m->bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sysconf.sbdn + 0x06); + } - for(i=2; i<8;i++) { - dev = dev_find_slot(m->bus_mcp55[0], PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2 , 0)); - if (dev) { - m->bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2 ); - } - } + for (i = 2; i < 8; i++) { + dev = + dev_find_slot(m->bus_mcp55[0], + PCI_DEVFN(sysconf.sbdn + 0x0a + i - 2, 0)); + if (dev) { + m->bus_mcp55[i] = + pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + m->bus_mcp55[0], sysconf.sbdn + 0x0a + i - 2); + } + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS - apicid_base = get_apicid_base(1); + apicid_base = get_apicid_base(1); #else - apicid_base = CONFIG_MAX_PHYSICAL_CPUS; + apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - m->apicid_mcp55 = apicid_base+0; + m->apicid_mcp55 = apicid_base + 0; } diff --git a/src/mainboard/sunw/ultra40/get_bus_conf.c b/src/mainboard/sunw/ultra40/get_bus_conf.c index af4d6f0ade..f57719a773 100644 --- a/src/mainboard/sunw/ultra40/get_bus_conf.c +++ b/src/mainboard/sunw/ultra40/get_bus_conf.c @@ -9,60 +9,57 @@ #include #include - // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default - unsigned char bus_ck804_0; //1 - unsigned char bus_ck804_1; //2 - unsigned char bus_ck804_2; //3 - unsigned char bus_ck804_3; //4 - unsigned char bus_ck804_4; //5 - unsigned char bus_ck804_5; //6 - unsigned char bus_8131_0; //7 - unsigned char bus_8131_1; //8 - unsigned char bus_8131_2; //9 - unsigned char bus_ck804b_0;//a - unsigned char bus_ck804b_1;//b - unsigned char bus_ck804b_2;//c - unsigned char bus_ck804b_3;//d - unsigned char bus_ck804b_4;//e - unsigned char bus_ck804b_5;//f - unsigned apicid_ck804; - unsigned apicid_8131_1; - unsigned apicid_8131_2; - unsigned apicid_ck804b; +unsigned char bus_ck804_0; //1 +unsigned char bus_ck804_1; //2 +unsigned char bus_ck804_2; //3 +unsigned char bus_ck804_3; //4 +unsigned char bus_ck804_4; //5 +unsigned char bus_ck804_5; //6 +unsigned char bus_8131_0; //7 +unsigned char bus_8131_1; //8 +unsigned char bus_8131_2; //9 +unsigned char bus_ck804b_0; //a +unsigned char bus_ck804b_1; //b +unsigned char bus_ck804b_2; //c +unsigned char bus_ck804b_3; //d +unsigned char bus_ck804b_4; //e +unsigned char bus_ck804b_5; //f +unsigned apicid_ck804; +unsigned apicid_8131_1; +unsigned apicid_8131_2; +unsigned apicid_ck804b; unsigned sblk; -unsigned pci1234[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, +unsigned pci1234[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0 }; + unsigned hc_possible_num; unsigned sbdn; -unsigned hcdn[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most +unsigned hcdn[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, 0x20202020, 0x20202020, - 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, }; + unsigned sbdn3; unsigned sbdnb; - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) @@ -70,9 +67,10 @@ void get_bus_conf(void) unsigned apicid_base; - device_t dev; + device_t dev; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once get_bus_conf_done = 1; @@ -80,178 +78,192 @@ void get_bus_conf(void) get_sblk_pci1234(); - sbdn = (hcdn[0] & 0xff); // first byte of first chain + sbdn = (hcdn[0] & 0xff); // first byte of first chain sbdn3 = (hcdn[1] & 0xff); - sbdnb = (hcdn[2] & 0xff); // first byte of second chain + sbdnb = (hcdn[2] & 0xff); // first byte of second chain -// bus_ck804_0 = node_link_to_bus(0, sblk); +// bus_ck804_0 = node_link_to_bus(0, sblk); bus_ck804_0 = (pci1234[0] >> 16) & 0xff; - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09, 0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); #if 0 - bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_2++; + bus_ck804_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_2++; #else - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; #endif - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x09); - bus_ck804_1 = 2; + bus_ck804_1 = 2; #if 0 - bus_ck804_2 = 3; + bus_ck804_2 = 3; #else - bus_ck804_5 = 3; + bus_ck804_5 = 3; #endif - } + } #if 0 - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b,0)); - if (dev) { - bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_3++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0b); + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0b, 0)); + if (dev) { + bus_ck804_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_3++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0b); - bus_ck804_3 = bus_ck804_2+1; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c,0)); - if (dev) { - bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x0c); - - bus_ck804_4 = bus_ck804_3+1; - } - - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); - - bus_ck804_5 = bus_ck804_4+1; - } -#endif - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); - } - - bus_8131_0 = (pci1234[1] >> 16) & 0xff; - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - - bus_8131_1 = bus_8131_0+1; - bus_8131_2 = bus_8131_0+2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - - bus_8131_2 = bus_8131_1+1; - } - - /* CK804b */ - - if(pci1234[2] & 0xf) { //if the second cpu is installed - bus_ck804b_0 = (pci1234[2]>>16) & 0xff; -#if 0 - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09,0)); - if (dev) { - bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_2++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x09); - - bus_ck804b_1 = bus_ck804b_0+1; - bus_ck804b_2 = bus_ck804b_0+2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b,0)); - if (dev) { - bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_3 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_3++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0b); - - bus_ck804b_2 = bus_ck804b_0+1; - bus_ck804b_3 = bus_ck804b_0+2; - } - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c,0)); - if (dev) { - bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_4++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0c); - - bus_ck804b_4 = bus_ck804b_3+1; - } - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d,0)); - if (dev) { - bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804b_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804b_5++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0d); - - bus_ck804b_5 = bus_ck804b_4+1; - } -#endif - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e,0)); - if (dev) { - bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); -#if 1 - bus_ck804b_5 = bus_ck804b_4+1; -#endif - - } + bus_ck804_3 = bus_ck804_2 + 1; } + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0c, 0)); + if (dev) { + bus_ck804_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0c); + + bus_ck804_4 = bus_ck804_3 + 1; + } + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d, 0)); + if (dev) { + bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0d); + + bus_ck804_5 = bus_ck804_4 + 1; + } +#endif + + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0e, 0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0e); + } + + bus_8131_0 = (pci1234[1] >> 16) & 0xff; + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:01.0, using defaults\n", + bus_8131_0); + + bus_8131_1 = bus_8131_0 + 1; + bus_8131_2 = bus_8131_0 + 2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:02.0, using defaults\n", + bus_8131_0); + + bus_8131_2 = bus_8131_1 + 1; + } + + /* CK804b */ + + if (pci1234[2] & 0xf) { //if the second cpu is installed + bus_ck804b_0 = (pci1234[2] >> 16) & 0xff; +#if 0 + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x09, 0)); + if (dev) { + bus_ck804b_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_2 = + pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_2++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x09); + + bus_ck804b_1 = bus_ck804b_0 + 1; + bus_ck804b_2 = bus_ck804b_0 + 2; + } + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0b, 0)); + if (dev) { + bus_ck804b_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_3 = + pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_3++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x0b); + + bus_ck804b_2 = bus_ck804b_0 + 1; + bus_ck804b_3 = bus_ck804b_0 + 2; + } + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0c, 0)); + if (dev) { + bus_ck804b_3 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_4 = + pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_4++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x0c); + + bus_ck804b_4 = bus_ck804b_3 + 1; + } + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0d, 0)); + if (dev) { + bus_ck804b_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804b_5 = + pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804b_5++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x0d); + + bus_ck804b_5 = bus_ck804b_4 + 1; + } +#endif + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e, 0)); + if (dev) { + bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x0e); +#if 1 + bus_ck804b_5 = bus_ck804b_4 + 1; +#endif + + } + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -259,9 +271,9 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_ck804 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; - apicid_ck804b = apicid_base+3; + apicid_ck804 = apicid_base + 0; + apicid_8131_1 = apicid_base + 1; + apicid_8131_2 = apicid_base + 2; + apicid_ck804b = apicid_base + 3; } diff --git a/src/mainboard/supermicro/h8dme/get_bus_conf.c b/src/mainboard/supermicro/h8dme/get_bus_conf.c index 5b16f83384..0279f8f7f6 100644 --- a/src/mainboard/supermicro/h8dme/get_bus_conf.c +++ b/src/mainboard/supermicro/h8dme/get_bus_conf.c @@ -31,19 +31,17 @@ #include #include - // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; +unsigned char bus_mcp55[8]; //1 +unsigned apicid_mcp55; - unsigned char bus_pcix[3]; // under bus_mcp55_2 +unsigned char bus_pcix[3]; // under bus_mcp55_2 -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -51,8 +49,8 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, // 0x20202020, @@ -62,10 +60,9 @@ unsigned hcdnx[] = // 0x20202020, // 0x20202020, }; + unsigned sbdnb; - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) @@ -74,71 +71,75 @@ void get_bus_conf(void) unsigned apicid_base; unsigned sbdn; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 16) & 0xff; - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06,0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); + /* MCP55 */ + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); + if (dev) { + bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_mcp55[2]++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x06); - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } + bus_mcp55[1] = 2; + bus_mcp55[2] = 3; + } - for(i=2; i<8;i++) { - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x0a + i - 2 , 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_mcp55[0], sbdn + 0x0a + i - 2 ); - } + for (i = 2; i < 8; i++) { + dev = + dev_find_slot(bus_mcp55[0], + PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); + if (dev) { + bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_mcp55[0], sbdn + 0x0a + i - 2); } + } - if(bus_mcp55[2]) { - for(i=0;i<2; i++) { - dev = dev_find_slot(bus_mcp55[2], PCI_DEVFN(0, i)); - if(dev) { - bus_pcix[0] = bus_mcp55[2]; - bus_pcix[i+1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } + if (bus_mcp55[2]) { + for (i = 0; i < 2; i++) { + dev = dev_find_slot(bus_mcp55[2], PCI_DEVFN(0, i)); + if (dev) { + bus_pcix[0] = bus_mcp55[2]; + bus_pcix[i + 1] = + pci_read_config8(dev, PCI_SECONDARY_BUS); } } - + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -146,6 +147,6 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_mcp55 = apicid_base+0; + apicid_mcp55 = apicid_base + 0; } diff --git a/src/mainboard/supermicro/h8dmr/get_bus_conf.c b/src/mainboard/supermicro/h8dmr/get_bus_conf.c index 5b16f83384..0279f8f7f6 100644 --- a/src/mainboard/supermicro/h8dmr/get_bus_conf.c +++ b/src/mainboard/supermicro/h8dmr/get_bus_conf.c @@ -31,19 +31,17 @@ #include #include - // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default - unsigned char bus_mcp55[8]; //1 - unsigned apicid_mcp55; +unsigned char bus_mcp55[8]; //1 +unsigned apicid_mcp55; - unsigned char bus_pcix[3]; // under bus_mcp55_2 +unsigned char bus_pcix[3]; // under bus_mcp55_2 -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -51,8 +49,8 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, // 0x20202020, @@ -62,10 +60,9 @@ unsigned hcdnx[] = // 0x20202020, // 0x20202020, }; + unsigned sbdnb; - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) @@ -74,71 +71,75 @@ void get_bus_conf(void) unsigned apicid_base; unsigned sbdn; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 16) & 0xff; - /* MCP55 */ - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06,0)); - if (dev) { - bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_mcp55[2]++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x06); + /* MCP55 */ + dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x06, 0)); + if (dev) { + bus_mcp55[1] = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_mcp55[2] = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_mcp55[2]++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x06); - bus_mcp55[1] = 2; - bus_mcp55[2] = 3; - } + bus_mcp55[1] = 2; + bus_mcp55[2] = 3; + } - for(i=2; i<8;i++) { - dev = dev_find_slot(bus_mcp55[0], PCI_DEVFN(sbdn + 0x0a + i - 2 , 0)); - if (dev) { - bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_mcp55[0], sbdn + 0x0a + i - 2 ); - } + for (i = 2; i < 8; i++) { + dev = + dev_find_slot(bus_mcp55[0], + PCI_DEVFN(sbdn + 0x0a + i - 2, 0)); + if (dev) { + bus_mcp55[i] = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_mcp55[0], sbdn + 0x0a + i - 2); } + } - if(bus_mcp55[2]) { - for(i=0;i<2; i++) { - dev = dev_find_slot(bus_mcp55[2], PCI_DEVFN(0, i)); - if(dev) { - bus_pcix[0] = bus_mcp55[2]; - bus_pcix[i+1] = pci_read_config8(dev, PCI_SECONDARY_BUS); - } + if (bus_mcp55[2]) { + for (i = 0; i < 2; i++) { + dev = dev_find_slot(bus_mcp55[2], PCI_DEVFN(0, i)); + if (dev) { + bus_pcix[0] = bus_mcp55[2]; + bus_pcix[i + 1] = + pci_read_config8(dev, PCI_SECONDARY_BUS); } } - + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -146,6 +147,6 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_mcp55 = apicid_base+0; + apicid_mcp55 = apicid_base + 0; } diff --git a/src/mainboard/tyan/s2881/get_bus_conf.c b/src/mainboard/tyan/s2881/get_bus_conf.c index c7b62c768d..332e578296 100644 --- a/src/mainboard/tyan/s2881/get_bus_conf.c +++ b/src/mainboard/tyan/s2881/get_bus_conf.c @@ -10,7 +10,6 @@ #include #include - // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default unsigned char bus_8131_0 = 1; @@ -18,14 +17,13 @@ unsigned char bus_8131_1 = 2; unsigned char bus_8131_2 = 3; unsigned char bus_8111_0 = 1; unsigned char bus_8111_1 = 4; -unsigned apicid_8111 ; +unsigned apicid_8111; unsigned apicid_8131_1; unsigned apicid_8131_2; -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -34,10 +32,10 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, -// 0x20202020, +// 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, @@ -45,10 +43,9 @@ unsigned hcdnx[] = // 0x20202020, // 0x20202020, }; + unsigned sbdn3; - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) @@ -56,20 +53,21 @@ void get_bus_conf(void) unsigned apicid_base; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 8) & 0xff; sbdn3 = sysconf.hcdn[0] & 0xff; @@ -77,33 +75,35 @@ void get_bus_conf(void) bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff; bus_8111_0 = bus_8131_0; - /* 8111 */ - dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); - } + /* 8111 */ + dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn, 0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:03.0, using defaults\n", + bus_8111_0); + } - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - } - - /* 8132-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - } + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:01.0, using defaults\n", + bus_8131_0); + } + /* 8132-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3 + 1, 0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:02.0, using defaults\n", + bus_8131_0); + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -111,7 +111,7 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; + apicid_8111 = apicid_base + 0; + apicid_8131_1 = apicid_base + 1; + apicid_8131_2 = apicid_base + 2; } diff --git a/src/mainboard/tyan/s2885/get_bus_conf.c b/src/mainboard/tyan/s2885/get_bus_conf.c index e390f7c106..88706c0bd5 100644 --- a/src/mainboard/tyan/s2885/get_bus_conf.c +++ b/src/mainboard/tyan/s2885/get_bus_conf.c @@ -19,15 +19,14 @@ unsigned char bus_8111_0 = 1; unsigned char bus_8111_1 = 4; unsigned char bus_8151_0 = 5; unsigned char bus_8151_1 = 6; -unsigned apicid_8111 ; +unsigned apicid_8111; unsigned apicid_8131_1; unsigned apicid_8131_2; -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -35,8 +34,8 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, // 0x20202020, @@ -46,11 +45,10 @@ unsigned hcdnx[] = // 0x20202020, // 0x20202020, }; + unsigned sbdn3; unsigned sbdn5; - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) @@ -58,20 +56,21 @@ void get_bus_conf(void) unsigned apicid_base; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 8) & 0xff; sbdn3 = sysconf.hcdn[0] & 0xff; @@ -80,43 +79,46 @@ void get_bus_conf(void) bus_8131_0 = (sysconf.pci1234[0] >> 16) & 0xff; bus_8111_0 = bus_8131_0; - /* 8111 */ - dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn,0)); - if (dev) { - bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:03.0, using defaults\n", bus_8111_0); - } + /* 8111 */ + dev = dev_find_slot(bus_8111_0, PCI_DEVFN(sysconf.sbdn, 0)); + if (dev) { + bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:03.0, using defaults\n", + bus_8111_0); + } - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - } + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:01.0, using defaults\n", + bus_8131_0); + } - /* 8132-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - } + /* 8132-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3 + 1, 0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:02.0, using defaults\n", + bus_8131_0); + } - /* HT chain 1 */ + /* HT chain 1 */ // it is on node0, so it must be there bus_8151_0 = (sysconf.pci1234[1] >> 16) & 0xff; - /* 8151 */ - dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5+1, 0)); + /* 8151 */ + dev = dev_find_slot(bus_8151_0, PCI_DEVFN(sbdn5 + 1, 0)); - if (dev) { - bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + if (dev) { + bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); // printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1); - } + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -124,7 +126,7 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_8111 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; + apicid_8111 = apicid_base + 0; + apicid_8131_1 = apicid_base + 1; + apicid_8131_2 = apicid_base + 2; } diff --git a/src/mainboard/tyan/s2891/get_bus_conf.c b/src/mainboard/tyan/s2891/get_bus_conf.c index 6be68adbec..e94c608cc7 100644 --- a/src/mainboard/tyan/s2891/get_bus_conf.c +++ b/src/mainboard/tyan/s2891/get_bus_conf.c @@ -12,38 +12,36 @@ // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default - unsigned char bus_ck804_0; //1 - unsigned char bus_ck804_1; //2 - unsigned char bus_ck804_2; //3 - unsigned char bus_ck804_3; //4 - unsigned char bus_ck804_4; //5 - unsigned char bus_ck804_5; //6 - unsigned char bus_8131_0; //7 - unsigned char bus_8131_1; //8 - unsigned char bus_8131_2; //9 - unsigned char bus_coproc_0; - unsigned apicid_ck804; - unsigned apicid_8131_1; - unsigned apicid_8131_2; +unsigned char bus_ck804_0; //1 +unsigned char bus_ck804_1; //2 +unsigned char bus_ck804_2; //3 +unsigned char bus_ck804_3; //4 +unsigned char bus_ck804_4; //5 +unsigned char bus_ck804_5; //6 +unsigned char bus_8131_0; //7 +unsigned char bus_8131_1; //8 +unsigned char bus_8131_2; //9 +unsigned char bus_coproc_0; +unsigned apicid_ck804; +unsigned apicid_8131_1; +unsigned apicid_8131_2; - -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000000, - 0x0000200, - 0x0000100, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000000, + 0x0000200, + 0x0000100, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, 0x20202020, 0x20202020, - 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, @@ -54,8 +52,6 @@ unsigned hcdnx[] = unsigned sbdn3; unsigned coprocdn; - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) @@ -64,93 +60,97 @@ void get_bus_conf(void) unsigned apicid_base; unsigned sbdn; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 16) & 0xff; + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09, 0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x09); - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + bus_ck804_1 = 2; + bus_ck804_4 = 3; + } - bus_ck804_1 = 2; - bus_ck804_4 = 3; - } + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d, 0)); + if (dev) { + bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0d); - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + bus_ck804_5 = bus_ck804_4 + 1; + } - bus_ck804_5 = bus_ck804_4+1; - } + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0e, 0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0e); + } - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); - } + bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:01.0, using defaults\n", + bus_8131_0); - bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); + bus_8131_1 = bus_8131_0 + 1; + bus_8131_2 = bus_8131_0 + 2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3 + 1, 0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:02.0, using defaults\n", + bus_8131_0); - bus_8131_1 = bus_8131_0+1; - bus_8131_2 = bus_8131_0+2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - - bus_8131_2 = bus_8131_1+1; - } - - if(sysconf.pci1234[2] & 1) { - bus_coproc_0 = (sysconf.pci1234[2] >> 16) & 0xff; - coprocdn = (sysconf.hcdn[2] & 0xff); - } + bus_8131_2 = bus_8131_1 + 1; + } + if (sysconf.pci1234[2] & 1) { + bus_coproc_0 = (sysconf.pci1234[2] >> 16) & 0xff; + coprocdn = (sysconf.hcdn[2] & 0xff); + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -158,7 +158,7 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_ck804 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; + apicid_ck804 = apicid_base + 0; + apicid_8131_1 = apicid_base + 1; + apicid_8131_2 = apicid_base + 2; } diff --git a/src/mainboard/tyan/s2892/get_bus_conf.c b/src/mainboard/tyan/s2892/get_bus_conf.c index 174632fa44..0ead854448 100644 --- a/src/mainboard/tyan/s2892/get_bus_conf.c +++ b/src/mainboard/tyan/s2892/get_bus_conf.c @@ -12,24 +12,23 @@ // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default - unsigned char bus_ck804_0; //1 - unsigned char bus_ck804_1; //2 - unsigned char bus_ck804_2; //3 - unsigned char bus_ck804_3; //4 - unsigned char bus_ck804_4; //5 - unsigned char bus_ck804_5; //6 - unsigned char bus_8131_0; //7 - unsigned char bus_8131_1; //8 - unsigned char bus_8131_2; //9 - unsigned apicid_ck804; - unsigned apicid_8131_1; - unsigned apicid_8131_2; +unsigned char bus_ck804_0; //1 +unsigned char bus_ck804_1; //2 +unsigned char bus_ck804_2; //3 +unsigned char bus_ck804_3; //4 +unsigned char bus_ck804_4; //5 +unsigned char bus_ck804_5; //6 +unsigned char bus_8131_0; //7 +unsigned char bus_8131_1; //8 +unsigned char bus_8131_2; //9 +unsigned apicid_ck804; +unsigned apicid_8131_1; +unsigned apicid_8131_2; -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, @@ -37,8 +36,8 @@ unsigned pci1234x[] = // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most 0x20202020, 0x20202020, // 0x20202020, @@ -51,8 +50,6 @@ unsigned hcdnx[] = unsigned sbdn3; - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) @@ -61,89 +58,92 @@ void get_bus_conf(void) unsigned apicid_base; unsigned sbdn; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 16) & 0xff; + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09, 0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_4++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x09); - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_4 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_4++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + bus_ck804_1 = 2; + bus_ck804_4 = 3; + } - bus_ck804_1 = 2; - bus_ck804_4 = 3; - } + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d, 0)); + if (dev) { + bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0d); - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0d,0)); - if (dev) { - bus_ck804_4 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n",sbdn + 0x0d); + bus_ck804_5 = bus_ck804_4 + 1; + } - bus_ck804_5 = bus_ck804_4+1; - } + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0e, 0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0e); + } - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); - } - - bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - - bus_8131_1 = bus_8131_0+1; - bus_8131_2 = bus_8131_0+2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3+1,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - - bus_8131_2 = bus_8131_1+1; - } + bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:01.0, using defaults\n", + bus_8131_0); + bus_8131_1 = bus_8131_0 + 1; + bus_8131_2 = bus_8131_0 + 2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3 + 1, 0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:02.0, using defaults\n", + bus_8131_0); + bus_8131_2 = bus_8131_1 + 1; + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -151,7 +151,7 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_ck804 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; + apicid_ck804 = apicid_base + 0; + apicid_8131_1 = apicid_base + 1; + apicid_8131_2 = apicid_base + 2; } diff --git a/src/mainboard/tyan/s2895/get_bus_conf.c b/src/mainboard/tyan/s2895/get_bus_conf.c index abd6297b48..11b1bc211e 100644 --- a/src/mainboard/tyan/s2895/get_bus_conf.c +++ b/src/mainboard/tyan/s2895/get_bus_conf.c @@ -12,43 +12,42 @@ // Global variables for MB layouts and these will be shared by irqtable mptable and acpi_tables //busnum is default - unsigned char bus_ck804_0; //1 - unsigned char bus_ck804_1; //2 - unsigned char bus_ck804_2; //3 - unsigned char bus_ck804_3; //4 - unsigned char bus_ck804_4; //5 - unsigned char bus_ck804_5; //6 - unsigned char bus_8131_0; //7 - unsigned char bus_8131_1; //8 - unsigned char bus_8131_2; //9 - unsigned char bus_ck804b_0;//a - unsigned char bus_ck804b_1;//b - unsigned char bus_ck804b_2;//c - unsigned char bus_ck804b_3;//d - unsigned char bus_ck804b_4;//e - unsigned char bus_ck804b_5;//f - unsigned apicid_ck804; - unsigned apicid_8131_1; - unsigned apicid_8131_2; - unsigned apicid_ck804b; +unsigned char bus_ck804_0; //1 +unsigned char bus_ck804_1; //2 +unsigned char bus_ck804_2; //3 +unsigned char bus_ck804_3; //4 +unsigned char bus_ck804_4; //5 +unsigned char bus_ck804_5; //6 +unsigned char bus_8131_0; //7 +unsigned char bus_8131_1; //8 +unsigned char bus_8131_2; //9 +unsigned char bus_ck804b_0; //a +unsigned char bus_ck804b_1; //b +unsigned char bus_ck804b_2; //c +unsigned char bus_ck804b_3; //d +unsigned char bus_ck804b_4; //e +unsigned char bus_ck804b_5; //f +unsigned apicid_ck804; +unsigned apicid_8131_1; +unsigned apicid_8131_2; +unsigned apicid_ck804b; -unsigned pci1234x[] = -{ //Here you only need to set value in pci1234 for HT-IO that could be installed or not - //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail - 0x0000ff0, - 0x0000ff0, - 0x0000ff0, +unsigned pci1234x[] = { //Here you only need to set value in pci1234 for HT-IO that could be installed or not + //You may need to preset pci1234 for HTIO board, please refer to src/northbridge/amd/amdk8/get_sblk_pci1234.c for detail + 0x0000ff0, + 0x0000ff0, + 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0, // 0x0000ff0 }; -unsigned hcdnx[] = -{ //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + +unsigned hcdnx[] = { //HT Chain device num, actually it is unit id base of every ht device in chain, assume every chain only have 4 ht device at most + 0x20202020, 0x20202020, 0x20202020, - 0x20202020, // 0x20202020, // 0x20202020, // 0x20202020, @@ -59,8 +58,6 @@ unsigned hcdnx[] = unsigned sbdn3; unsigned sbdnb; - - static unsigned get_bus_conf_done = 0; void get_bus_conf(void) @@ -69,92 +66,97 @@ void get_bus_conf(void) unsigned apicid_base; unsigned sbdn; - device_t dev; - int i; + device_t dev; + int i; - if(get_bus_conf_done==1) return; //do it only once + if (get_bus_conf_done == 1) + return; //do it only once - get_bus_conf_done = 1; + get_bus_conf_done = 1; - sysconf.hc_possible_num = ARRAY_SIZE(pci1234x); - for(i=0;i> 16) & 0xff; - /* CK804 */ - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09,0)); - if (dev) { - bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_ck804_5++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn + 0x09); + /* CK804 */ + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x09, 0)); + if (dev) { + bus_ck804_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_ck804_5 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_ck804_5++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x09); - bus_ck804_1 = 2; - bus_ck804_5 = 3; - } - - dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn+ 0x0e,0)); - if (dev) { - bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI 1:%02x.0, using defaults\n", sbdn+ 0x0e); - } - - bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; - /* 8131-1 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); - if (dev) { - bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); - bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); - bus_8131_2++; - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:01.0, using defaults\n", bus_8131_0); - - bus_8131_1 = bus_8131_0+1; - bus_8131_2 = bus_8131_0+2; - } - /* 8131-2 */ - dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3,0)); - if (dev) { - bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:02.0, using defaults\n", bus_8131_0); - - bus_8131_2 = bus_8131_1+1; - } - - /* CK804b */ - - if(sysconf.pci1234[2] & 0x0f) { //if the second cpu is installed - bus_ck804b_0 = (sysconf.pci1234[2]>>16) & 0xff; - - dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e,0)); - if (dev) { - bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); - } - else { - printk(BIOS_DEBUG, "ERROR - could not find PCI %02x:%02x.0, using defaults\n", bus_ck804b_0,sbdnb+0x0e); - bus_ck804b_5 = bus_ck804b_4+1; - } + bus_ck804_1 = 2; + bus_ck804_5 = 3; } + dev = dev_find_slot(bus_ck804_0, PCI_DEVFN(sbdn + 0x0e, 0)); + if (dev) { + bus_ck804_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI 1:%02x.0, using defaults\n", + sbdn + 0x0e); + } + + bus_8131_0 = (sysconf.pci1234[1] >> 16) & 0xff; + /* 8131-1 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_1 = pci_read_config8(dev, PCI_SECONDARY_BUS); + bus_8131_2 = pci_read_config8(dev, PCI_SUBORDINATE_BUS); + bus_8131_2++; + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:01.0, using defaults\n", + bus_8131_0); + + bus_8131_1 = bus_8131_0 + 1; + bus_8131_2 = bus_8131_0 + 2; + } + /* 8131-2 */ + dev = dev_find_slot(bus_8131_0, PCI_DEVFN(sbdn3, 0)); + if (dev) { + bus_8131_2 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:02.0, using defaults\n", + bus_8131_0); + + bus_8131_2 = bus_8131_1 + 1; + } + + /* CK804b */ + + if (sysconf.pci1234[2] & 0x0f) { //if the second cpu is installed + bus_ck804b_0 = (sysconf.pci1234[2] >> 16) & 0xff; + + dev = dev_find_slot(bus_ck804b_0, PCI_DEVFN(sbdnb + 0x0e, 0)); + if (dev) { + bus_ck804b_5 = pci_read_config8(dev, PCI_SECONDARY_BUS); + } else { + printk(BIOS_DEBUG, + "ERROR - could not find PCI %02x:%02x.0, using defaults\n", + bus_ck804b_0, sbdnb + 0x0e); + bus_ck804b_5 = bus_ck804b_4 + 1; + } + } /*I/O APICs: APIC ID Version State Address*/ #if CONFIG_LOGICAL_CPUS @@ -162,8 +164,8 @@ void get_bus_conf(void) #else apicid_base = CONFIG_MAX_PHYSICAL_CPUS; #endif - apicid_ck804 = apicid_base+0; - apicid_8131_1 = apicid_base+1; - apicid_8131_2 = apicid_base+2; - apicid_ck804b = apicid_base+3; + apicid_ck804 = apicid_base + 0; + apicid_8131_1 = apicid_base + 1; + apicid_8131_2 = apicid_base + 2; + apicid_ck804b = apicid_base + 3; }