mb/system76/addw1: Add System76 Adder Workstation 1

Change-Id: I5dd3bc320ca640728e1d86180c6bfa0dc7295760
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48421
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This commit is contained in:
Tim Crawford 2021-09-20 10:18:02 -06:00 committed by Felix Held
parent 5ab146674c
commit 6a93a45242
24 changed files with 2334 additions and 0 deletions

View File

@ -180,6 +180,7 @@ The boards in this section are not real mainboards, but emulators.
## System76 ## System76
- [Adder Workstation 1](system76/addw1.md)
- [Darter Pro 6](system76/darp6.md) - [Darter Pro 6](system76/darp6.md)
- [Darter Pro 7](system76/darp7.md) - [Darter Pro 7](system76/darp7.md)
- [Galago Pro 4](system76/galp4.md) - [Galago Pro 4](system76/galp4.md)

View File

@ -0,0 +1,67 @@
# System76 Adder Workstation 1 (addw1)
## Specs
- CPU
- Intel Core i7-9750H
- Intel Core i9-9980HK
- Chipset
- Intel HM370
- EC
- ITE IT8587E running [System76 EC](https://github.com/system76/ec)
- Graphics
- Intel UHD Graphics 630
- NVIDIA GeForce RTX 2070
- eDP 15.6" 3840x2160 OLED (Samsung ATNA56WR06)
- 1x HDMI
- 1x Mini DisplayPort 1.3
- 1x DisplayPort 1.3 over USB-C
- Memory:
- Up to 64GB dual-channel DDR4 @ 2666 MHz, or
- Up to 32GB dual-channel DDR4 @ 3000 MHz
- Networking
- Gigabit Ethernet
- Intel Wireless-AC
- Power
- 230W (19.5V, 11.8A) AC adapter
- Removable 62Wh 6-cell battery
- Sound
- Realtek ALC1220 codec
- TAS5825MRHBR smart AMP
- Internal speakers and microphone
- Combined headphone and microphone 3.5mm jack
- Combined microphone and S/PDIF 3.5mm jack
- HDMI, Mini DisplayPort, USB-C DP audio
- Storage
- M.2 PCIe/SATA SSD1
- M.2 PCIe/SATA SSD2
- 2.5" SATA HDD/SSD
- RTS5250 SD card reader
- USB
- 1x USB Type-C with Thunderbolt 3
- 1x USB 3.1 Gen2 Type-C
- 3x USB 3.1 Gen1 Type-A
## Flashing coreboot
```eval_rst
+---------------------+---------------------+
| Type | Value |
+=====================+=====================+
| Socketed flash | no |
+---------------------+---------------------+
| Vendor | Macronix |
+---------------------+---------------------+
| Model | MX25L12873F |
+---------------------+---------------------+
| Size | 16 MiB |
+---------------------+---------------------+
| Package | SOIC-8 |
+---------------------+---------------------+
| Internal flashing | yes |
+---------------------+---------------------+
| External flashing | yes |
+---------------------+---------------------+
```
The flash chip (U61) is next to the battery connector.

View File

@ -0,0 +1,65 @@
if BOARD_SYSTEM76_ADDW1
config BOARD_SPECIFIC_OPTIONS
def_bool y
select BOARD_ROMSIZE_KB_16384
select DRIVERS_I2C_HID
select DRIVERS_I2C_TAS5825M
select EC_SYSTEM76_EC
select EC_SYSTEM76_EC_BAT_THRESHOLDS
select EC_SYSTEM76_EC_COLOR_KEYBOARD
select EC_SYSTEM76_EC_OLED
select HAVE_ACPI_RESUME
select HAVE_ACPI_TABLES
select HAVE_CMOS_DEFAULT
select HAVE_OPTION_TABLE
select INTEL_GMA_HAVE_VBT
select INTEL_LPSS_UART_FOR_CONSOLE
select MAINBOARD_HAS_LPC_TPM
select MAINBOARD_HAS_TPM2
select NO_UART_ON_SUPERIO
select PCIEXP_HOTPLUG
select SOC_INTEL_CANNONLAKE_PCH_H
select SOC_INTEL_COFFEELAKE if BOARD_SYSTEM76_ADDW1
select SOC_INTEL_COMMON_BLOCK_HDA_VERB
select SPD_READ_BY_WORD
select SYSTEM_TYPE_LAPTOP
select TPM_RDRESP_NEED_DELAY
config MAINBOARD_DIR
default "system76/addw1"
config VARIANT_DIR
default "addw1" if BOARD_SYSTEM76_ADDW1
config OVERRIDE_DEVICETREE
default "variants/\$(CONFIG_VARIANT_DIR)/overridetree.cb"
config MAINBOARD_PART_NUMBER
default "addw1" if BOARD_SYSTEM76_ADDW1
config MAINBOARD_SMBIOS_PRODUCT_NAME
default "Adder WS"
config MAINBOARD_VERSION
default "addw1" if BOARD_SYSTEM76_ADDW1
config CBFS_SIZE
default 0xA00000
config CONSOLE_POST
default y
config ONBOARD_VGA_IS_PRIMARY
default y
config UART_FOR_CONSOLE
default 2
config DIMM_MAX
default 2
config POST_DEVICE
default n
endif

View File

@ -0,0 +1,2 @@
config BOARD_SYSTEM76_ADDW1
bool "addw1"

View File

@ -0,0 +1,11 @@
CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/include
bootblock-y += bootblock.c
bootblock-y += variants/$(VARIANT_DIR)/gpio_early.c
romstage-y += romstage.c
ramstage-y += ramstage.c
ramstage-y += variants/$(VARIANT_DIR)/gpio.c
ramstage-y += variants/$(VARIANT_DIR)/hda_verb.c
ramstage-y += variants/$(VARIANT_DIR)/tas5825m.c

View File

@ -0,0 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0-only */
// GPP_K6 SCI
Method (_L06, 0, Serialized) {
Debug = Concatenate("GPE _L06: ", ToHexString(\_SB.PCI0.LPCB.EC0.WFNO))
If (\_SB.PCI0.LPCB.EC0.ECOK) {
If (\_SB.PCI0.LPCB.EC0.WFNO == 1) {
Notify(\_SB.LID0, 0x80)
}
}
}

View File

@ -0,0 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#define EC_GPE_SCI 0x03 /* GPP_K3 */
#define EC_GPE_SWI 0x06 /* GPP_K6 */
#include <ec/system76/ec/acpi/ec.asl>
Scope (\_SB) {
#include "sleep.asl"
}
Scope (\_GPE) {
#include "gpe.asl"
}

View File

@ -0,0 +1,11 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/* Method called from _PTS prior to enter sleep state */
Method (MPTS, 1) {
\_SB.PCI0.LPCB.EC0.PTS (Arg0)
}
/* Method called from _WAK prior to wakeup */
Method (MWAK, 1) {
\_SB.PCI0.LPCB.EC0.WAK (Arg0)
}

View File

@ -0,0 +1,6 @@
Vendor name: System76
Category: laptop
ROM package: SOIC-8
ROM protocol: SPI
ROM socketed: n
Flashrom support: y

View File

@ -0,0 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <bootblock_common.h>
#include <variant/gpio.h>
void bootblock_mainboard_early_init(void)
{
variant_configure_early_gpios();
}

View File

@ -0,0 +1,3 @@
boot_option=Fallback
debug_level=Debug
power_on_after_fail=Enable

View File

@ -0,0 +1,39 @@
# SPDX-License-Identifier: GPL-2.0-only
entries
0 384 r 0 reserved_memory
# RTC_BOOT_BYTE (coreboot hardcoded)
384 1 e 4 boot_option
388 4 h 0 reboot_counter
# RTC_CLK_ALTCENTURY
400 8 r 0 century
409 2 e 7 power_on_after_fail
412 4 e 6 debug_level
984 16 h 0 check_sum
enumerations
4 0 Fallback
4 1 Normal
6 0 Emergency
6 1 Alert
6 2 Critical
6 3 Error
6 4 Warning
6 5 Notice
6 6 Info
6 7 Debug
6 8 Spew
7 0 Disable
7 1 Enable
7 2 Keep
checksums
checksum 408 983 984

View File

@ -0,0 +1,205 @@
chip soc/intel/cannonlake
register "common_soc_config" = "{
// Touchpad I2C bus
.i2c[0] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 80,
.fall_time_ns = 110,
},
}"
# CPU (soc/intel/cannonlake/cpu.c)
# Power limit
register "power_limits_config" = "{
.tdp_pl1_override = 45,
.tdp_pl2_override = 90,
}"
# Enable Enhanced Intel SpeedStep
register "eist_enable" = "1"
# FSP Memory (soc/intel/cannonlake/romstage/fsp_params.c)
register "enable_c6dram" = "1"
# FSP Silicon (soc/intel/cannonlake/fsp_params.c)
# Misc
register "AcousticNoiseMitigation" = "1"
# Power
register "PchPmSlpS3MinAssert" = "3" # 50ms
register "PchPmSlpS4MinAssert" = "1" # 1s
register "PchPmSlpSusMinAssert" = "4" # 4s
register "PchPmSlpAMinAssert" = "4" # 2s
# Thermal
register "tcc_offset" = "8"
# Serial IRQ Continuous
register "serirq_mode" = "SERIRQ_CONTINUOUS"
# PM Util (soc/intel/cannonlake/pmutil.c)
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "gpe0_dw0" = "PMC_GPP_K"
register "gpe0_dw1" = "PMC_GPP_G"
register "gpe0_dw2" = "PMC_GPP_E"
# Actual device tree
device cpu_cluster 0 on
device lapic 0 on end
end
device domain 0 on
subsystemid 0x1558 0x65d1 inherit
device pci 00.0 on end # Host Bridge
device pci 01.0 on # GPU Port
# PCI Express Graphics #0 x16, Clock 8 (NVIDIA GPU)
register "PcieClkSrcUsage[8]" = "0x40"
register "PcieClkSrcClkReq[8]" = "8"
end
device pci 02.0 on end # Integrated Graphics Device
device pci 04.0 on # SA Thermal device
register "Device4Enable" = "1"
end
device pci 12.0 on end # Thermal Subsystem
device pci 12.5 off end # UFS SCS
device pci 12.6 off end # GSPI #2
device pci 13.0 off end # Integrated Sensor Hub
device pci 14.0 on # USB xHCI
# USB2
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB 3.1 Gen 2 TYPE-C and DisplayPort
register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC_SKIP)" # USB 3.1 Gen 2 TYPE-C
register "usb2_ports[2]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 Gen 2
register "usb2_ports[4]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 Gen 1 audio
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # USB 3.1 Gen 1 back
register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)" # Fingerprint
register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Per-Key RGB keyboard
register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)" # Camera
register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)" # Bluetooth
# USB3
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 2 TYPE-C and DisplayPort
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 2 right
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 2 TYPE-C (without TBT)
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 2 TYPE-C (without TBT)
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 1 audio
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB 3.1 Gen 1 back
end
device pci 14.2 on end # Shared SRAM
device pci 14.3 on # CNVi wifi
chip drivers/wifi/generic
register "wake" = "PME_B0_EN_BIT"
device generic 0 on end
end
end
device pci 14.5 off end # SDCard
device pci 15.0 on end # I2C #0
device pci 15.1 off end # I2C #1
device pci 15.2 off end # I2C #2
device pci 15.3 off end # I2C #3
device pci 16.0 off end # Management Engine Interface 1
device pci 16.1 off end # Management Engine Interface 2
device pci 16.2 off end # Management Engine IDE-R
device pci 16.3 off end # Management Engine KT Redirection
device pci 16.4 off end # Management Engine Interface 3
device pci 16.5 off end # Management Engine Interface 4
device pci 17.0 on # SATA
register "SataPortsEnable[0]" = "1" # HDD (SATA0B)
register "SataPortsEnable[1]" = "1" # SSD1 (SATA1A)
end
device pci 19.2 off end # UART #2
device pci 1a.0 off end # eMMC
device pci 1b.0 on # PCI Express Port 17
# PCI Express root port #17 x4, Clock 0 (Thunderbolt)
register "PcieRpEnable[16]" = "1"
register "PcieRpLtrEnable[16]" = "1"
register "PcieRpHotPlug[16]" = "1"
register "PcieClkSrcUsage[0]" = "16"
register "PcieClkSrcClkReq[0]" = "0"
end
device pci 1b.1 off end # PCI Express Port 18
device pci 1b.2 off end # PCI Express Port 19
device pci 1b.3 off end # PCI Express Port 20
device pci 1b.4 on # PCI Express Port 21
# PCI Express root port #21 x4, Clock 10 (SSD2)
register "PcieRpEnable[20]" = "1"
register "PcieRpLtrEnable[20]" = "1"
register "PcieClkSrcUsage[10]" = "20"
register "PcieClkSrcClkReq[10]" = "10"
register "PcieRpSlotImplemented[20]" = "1"
end
device pci 1b.5 off end # PCI Express Port 22
device pci 1b.6 off end # PCI Express Port 23
device pci 1b.7 off end # PCI Express Port 24
device pci 1c.0 off end # PCI Express Port 1
device pci 1c.1 off end # PCI Express Port 2
device pci 1c.2 off end # PCI Express Port 3
device pci 1c.3 off end # PCI Express Port 4
device pci 1c.4 off end # PCI Express Port 5
device pci 1c.5 off end # PCI Express Port 6
device pci 1c.6 off end # PCI Express Port 7
device pci 1c.7 off end # PCI Express Port 8
device pci 1d.0 on # PCI Express Port 9
# PCI Express root port #9 x4, Clock 9 (SSD1)
register "PcieRpEnable[8]" = "1"
register "PcieRpLtrEnable[8]" = "1"
register "PcieClkSrcUsage[9]" = "8"
register "PcieClkSrcClkReq[9]" = "9"
register "PcieRpSlotImplemented[8]" = "1"
end
device pci 1d.1 off end # PCI Express Port 10
device pci 1d.2 off end # PCI Express Port 11
device pci 1d.3 off end # PCI Express Port 12
device pci 1d.4 off end # PCI Express Port 13
device pci 1d.5 on # PCI Express Port 14
# PCI Express root port #14 x1, Clock 5 (GLAN)
register "PcieRpEnable[13]" = "1"
register "PcieRpLtrEnable[13]" = "1"
register "PcieClkSrcUsage[5]" = "13"
register "PcieClkSrcClkReq[5]" = "5"
register "PcieRpSlotImplemented[13]" = "1"
end
device pci 1d.6 on # PCI Express Port 15
# PCI Express root port #15 x1, Clock 7 (Card Reader)
register "PcieRpEnable[14]" = "1"
register "PcieRpLtrEnable[14]" = "1"
register "PcieClkSrcUsage[7]" = "14"
register "PcieClkSrcClkReq[7]" = "7"
register "PcieRpSlotImplemented[14]" = "1"
end
device pci 1d.7 on # PCI Express Port 16
# PCI Express root port #16 x1, Clock 6 (WLAN)
register "PcieRpEnable[15]" = "1"
register "PcieRpLtrEnable[15]" = "1"
register "PcieClkSrcUsage[6]" = "15"
register "PcieClkSrcClkReq[6]" = "6"
register "PcieRpSlotImplemented[15]" = "1"
end
device pci 1e.0 off end # UART #0
device pci 1e.1 off end # UART #1
device pci 1e.2 off end # GSPI #0
device pci 1e.3 off end # GSPI #1
device pci 1f.0 on # LPC Interface
register "gen1_dec" = "0x00040069"
register "gen2_dec" = "0x00fc0e01"
register "gen3_dec" = "0x00fc0f01"
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
end
device pci 1f.1 off end # P2SB
device pci 1f.2 hidden end # Power Management Controller
device pci 1f.3 on # Intel HDA
register "PchHdaAudioLinkHda" = "1"
end
device pci 1f.4 on # SMBus
chip drivers/i2c/tas5825m
register "id" = "0"
device i2c 4e on end # (8bit address: 0x9c)
end
end
device pci 1f.5 on end # PCH SPI
device pci 1f.6 off end # GbE
end
end

View File

@ -0,0 +1,30 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <acpi/acpi.h>
DefinitionBlock(
"dsdt.aml",
"DSDT",
ACPI_DSDT_REV_2,
OEM_ID,
ACPI_TABLE_CREATOR,
0x20110725
)
{
#include <acpi/dsdt_top.asl>
#include <soc/intel/common/block/acpi/acpi/platform.asl>
#include <soc/intel/common/block/acpi/acpi/globalnvs.asl>
#include <cpu/intel/common/acpi/cpu.asl>
Device (\_SB.PCI0) {
#include <soc/intel/common/block/acpi/acpi/northbridge.asl>
#include <soc/intel/cannonlake/acpi/southbridge.asl>
}
#include <southbridge/intel/common/acpi/sleepstates.asl>
Scope (\_SB.PCI0.LPCB) {
#include <drivers/pc80/pc/ps2_controller.asl>
}
#include "acpi/mainboard.asl"
}

View File

@ -0,0 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef VARIANT_GPIO_H
#define VARIANT_GPIO_H
void variant_configure_early_gpios(void);
void variant_configure_gpios(void);
#endif

View File

@ -0,0 +1,13 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/device.h>
#include <variant/gpio.h>
static void mainboard_init(void *chip_info)
{
variant_configure_gpios();
}
struct chip_operations mainboard_ops = {
.init = mainboard_init,
};

View File

@ -0,0 +1,27 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <soc/cnl_memcfg_init.h>
#include <soc/romstage.h>
static const struct cnl_mb_cfg memcfg = {
.spd[0] = {
.read_type = READ_SMBUS,
.spd_spec = {.spd_smbus_address = 0xa0},
},
.spd[2] = {
.read_type = READ_SMBUS,
.spd_spec = {.spd_smbus_address = 0xa4},
},
.rcomp_resistor = { 121, 75, 100 },
.rcomp_targets = { 50, 25, 20, 20, 26 },
.dq_pins_interleaved = 1,
.vref_ca_config = 2,
};
void mainboard_memory_init_params(FSPM_UPD *memupd)
{
// Allow higher memory speeds
memupd->FspmConfig.SaOcSupport = 1;
cannonlake_memcfg_init(&memupd->FspmConfig, &memcfg);
}

View File

@ -0,0 +1,2 @@
Board name: addw1
Release year: 2019

Binary file not shown.

View File

@ -0,0 +1,264 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <soc/gpio.h>
#include <variant/gpio.h>
static const struct pad_config gpio_table[] = {
/* ------- GPIO Group GPD ------- */
PAD_CFG_NF(GPD0, NONE, DEEP, NF1), // PM_BATLOW#
PAD_CFG_NF(GPD1, NATIVE, DEEP, NF1), // AC_PRESENT
PAD_NC(GPD2, NONE),
PAD_CFG_NF(GPD3, UP_20K, DEEP, NF1), // PWR_BTN#
PAD_CFG_NF(GPD4, NONE, DEEP, NF1), // SUSB#_PCH
PAD_CFG_NF(GPD5, NONE, DEEP, NF1), // SUSC#_PCH
PAD_NC(GPD6, NONE),
PAD_NC(GPD7, NONE),
PAD_CFG_NF(GPD8, NONE, DEEP, NF1), // SUS_CLK
PAD_NC(GPD9, NONE),
PAD_NC(GPD10, NONE),
PAD_NC(GPD11, NONE),
/* ------- GPIO Group GPP_A ------- */
PAD_CFG_GPO(GPP_A0, 0, DEEP), // SB_KBCRST#
PAD_CFG_NF(GPP_A1, NATIVE, DEEP, NF1), // LPC_AD0
PAD_CFG_NF(GPP_A2, NATIVE, DEEP, NF1), // LPC_AD1
PAD_CFG_NF(GPP_A3, NATIVE, DEEP, NF1), // LPC_AD2
PAD_CFG_NF(GPP_A4, NATIVE, DEEP, NF1), // LPC_AD3
PAD_CFG_NF(GPP_A5, NONE, DEEP, NF1), // LPC_FRAME#
PAD_CFG_NF(GPP_A6, NONE, DEEP, NF1), // SERIRQ
PAD_CFG_GPI(GPP_A7, NONE, DEEP), // SCI#_GPP_A7
PAD_CFG_NF(GPP_A8, NONE, DEEP, NF1), // ECCLKRUN#
PAD_CFG_NF(GPP_A9, DN_20K, DEEP, NF1), // PCLK_KBC
PAD_NC(GPP_A10, DN_20K),
PAD_NC(GPP_A11, UP_20K),
PAD_NC(GPP_A12, NONE),
PAD_CFG_NF(GPP_A13, NONE, DEEP, NF1), // SUSWARN#
PAD_NC(GPP_A14, NONE),
PAD_CFG_NF(GPP_A15, UP_20K, DEEP, NF1), // SUS_PWR_ACK#
PAD_NC(GPP_A16, DN_20K),
PAD_CFG_GPI(GPP_A17, NONE, DEEP), // AMP_TYPE_DET
PAD_CFG_GPO(GPP_A18, 1, DEEP), // SB_BLON
PAD_NC(GPP_A19, NONE),
PAD_CFG_GPO(GPP_A20, 1, DEEP), // PEX_WAKE#
PAD_NC(GPP_A21, NONE),
PAD_CFG_GPO(GPP_A22, 1, DEEP), // SMARTAMP_SW
PAD_CFG_GPI(GPP_A23, NONE, DEEP), // SMART AMP PWR (L:3.3VS H:3.3V)
/* ------- GPIO Group GPP_B ------- */
PAD_CFG_GPI(GPP_B0, NONE, DEEP), // TPM_PIRQ#
PAD_NC(GPP_B1, NONE),
PAD_NC(GPP_B2, NONE),
// PCH_GPP_B3 (touchpad interrupt)
PAD_CFG_GPI_APIC(GPP_B3, NONE, PLTRST, EDGE_SINGLE, INVERT),
PAD_NC(GPP_B4, NONE),
PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1), // TBT_CLKREQ#
PAD_NC(GPP_B6, NONE),
PAD_NC(GPP_B7, NONE),
PAD_NC(GPP_B8, NONE),
PAD_NC(GPP_B9, NONE),
PAD_CFG_NF(GPP_B10, NONE, DEEP, NF1), // GLAN_CLKREQ#
PAD_NC(GPP_B11, NONE),
PAD_CFG_NF(GPP_B12, NONE, DEEP, NF1), // SLP_S0#
_PAD_CFG_STRUCT(GPP_B13, 0x44000601, 0x0000), // PLT_RST#
PAD_CFG_NF(GPP_B14, NONE, DEEP, NF1), // PCH_SPKR
PAD_NC(GPP_B15, NONE),
PAD_NC(GPP_B16, NONE),
PAD_NC(GPP_B17, NONE),
PAD_CFG_GPI(GPP_B18, NONE, DEEP), // NO REBOOT STRAP
PAD_NC(GPP_B19, NONE),
PAD_CFG_GPI(GPP_B20, NONE, DEEP), // SMI#_GPP_B20
PAD_NC(GPP_B21, NONE),
PAD_CFG_GPI(GPP_B22, NONE, DEEP), // BOOT BIOS STRAP
PAD_CFG_GPI(GPP_B23, NONE, DEEP), // DCI-OOB STRAP
/* ------- GPIO Group GPP_C ------- */
PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1), // SMB_CLK
PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1), // SMB_DATA
_PAD_CFG_STRUCT(GPP_C2, 0x40880100, 0x0000), // CNVI_WAKE#
PAD_NC(GPP_C3, NONE),
PAD_NC(GPP_C4, NONE),
PAD_CFG_GPI(GPP_C5, NONE, DEEP), // WLAN_WAKEUP#
PAD_NC(GPP_C6, NONE),
PAD_NC(GPP_C7, NONE),
PAD_NC(GPP_C8, NONE),
PAD_CFG_GPI(GPP_C9, NONE, DEEP), // BOARD_ID2
PAD_CFG_GPI(GPP_C10, NONE, DEEP), // BOARD_ID1
PAD_CFG_GPI(GPP_C11, NONE, DEEP), // TBT_DET#
PAD_CFG_GPI(GPP_C12, NONE, DEEP), // GC6_FB_EN_PCH
PAD_CFG_GPI(GPP_C13, NONE, DEEP), // TPM_DET
PAD_CFG_GPO(GPP_C14, 1, DEEP), // GPU_EVENT#
PAD_CFG_GPI(GPP_C15, NONE, DEEP), // 100K pull-down
PAD_CFG_NF(GPP_C16, NONE, PLTRST, NF1), // TP_DAT_PCH_I2C0
PAD_CFG_NF(GPP_C17, NONE, PLTRST, NF1), // TP_CLK_PCH_I2C0
PAD_CFG_NF(GPP_C18, NONE, PLTRST, NF1), // I2C1_SDA
PAD_CFG_NF(GPP_C19, NONE, PLTRST, NF1), // I2C1_SCL
//PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), // UART2_RXD
//PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), // UART2_TXD
PAD_CFG_NF(GPP_C22, NONE, DEEP, NF1), // UART2_RTS#
PAD_CFG_NF(GPP_C23, NONE, DEEP, NF1), // UART2_CTS#
/* ------- GPIO Group GPP_D ------- */
PAD_NC(GPP_D0, NONE),
PAD_NC(GPP_D1, NONE),
PAD_NC(GPP_D2, NONE),
PAD_NC(GPP_D3, NONE),
PAD_NC(GPP_D4, NONE),
PAD_CFG_NF(GPP_D5, NONE, DEEP, NF3), // CNVI_RST#
PAD_CFG_NF(GPP_D6, NONE, DEEP, NF3), // CNVI_CLKREQ
PAD_NC(GPP_D7, NONE),
PAD_NC(GPP_D8, NONE),
PAD_NC(GPP_D9, NONE),
PAD_NC(GPP_D10, NONE),
PAD_NC(GPP_D11, NONE),
PAD_NC(GPP_D12, NONE),
PAD_NC(GPP_D13, NONE),
PAD_NC(GPP_D14, NONE),
PAD_NC(GPP_D15, NONE),
PAD_NC(GPP_D16, NONE),
PAD_NC(GPP_D17, NONE),
PAD_NC(GPP_D18, NONE),
PAD_NC(GPP_D19, NONE),
PAD_NC(GPP_D20, NONE),
PAD_NC(GPP_D21, NONE),
PAD_NC(GPP_D22, NONE),
PAD_NC(GPP_D23, NONE),
/* ------- GPIO Group GPP_E ------- */
PAD_NC(GPP_E0, NONE),
PAD_CFG_NF(GPP_E1, UP_20K, DEEP, NF1), // SATAGP1
PAD_NC(GPP_E2, NONE),
PAD_NC(GPP_E3, NONE),
PAD_NC(GPP_E4, NONE),
PAD_CFG_NF(GPP_E5, NONE, DEEP, NF1), // SATA_DEVSLP1
PAD_CFG_GPO(GPP_E6, 1, DEEP), // PCH_MUTE#
PAD_NC(GPP_E7, NONE),
PAD_CFG_NF(GPP_E8, NONE, DEEP, NF1), // SATAHDD_LED#
PAD_NC(GPP_E9, NONE),
PAD_NC(GPP_E10, NONE),
PAD_NC(GPP_E11, NONE),
PAD_NC(GPP_E12, NONE),
/* ------- GPIO Group GPP_F ------- */
PAD_NC(GPP_F0, NONE),
PAD_NC(GPP_F1, NONE),
PAD_NC(GPP_F2, NONE),
PAD_CFG_GPO(GPP_F3, 1, DEEP), // GPP_F3_LAN_RST#
PAD_CFG_GPO(GPP_F4, 1, DEEP), // GPP_F4_TBT_RST#
PAD_NC(GPP_F5, NONE),
PAD_NC(GPP_F6, NONE),
PAD_NC(GPP_F7, NONE),
PAD_NC(GPP_F8, NONE),
PAD_CFG_GPO(GPP_F9, 0, DEEP), // PS8331_SW
PAD_CFG_GPI(GPP_F10, NONE, DEEP), // BIOS RECOVERY ENABLE STRAP
PAD_NC(GPP_F11, NONE),
PAD_NC(GPP_F12, NONE),
PAD_NC(GPP_F13, NONE),
PAD_CFG_GPI(GPP_F14, NONE, DEEP), // H_SKTOCC_N
PAD_NC(GPP_F15, NONE),
PAD_NC(GPP_F16, NONE),
PAD_NC(GPP_F17, NONE),
PAD_NC(GPP_F18, NONE),
PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1), // NB_ENAVDD
PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1), // BLON
PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1), // EDP_BRIGHTNESS
//PAD_CFG_GPO(GPP_F22, 0, DEEP), // DGPU_RST#_PCH
//PAD_CFG_GPO(GPP_F23, 0, DEEP), // DGPU_PWR_EN
/* ------- GPIO Group GPP_G ------- */
PAD_CFG_GPI(GPP_G0, NONE, DEEP), // GSYNC_DET
PAD_NC(GPP_G1, NONE), // test point
PAD_CFG_GPI(GPP_G2, NONE, DEEP), // NVSR_DET#
PAD_NC(GPP_G3, NONE),
PAD_NC(GPP_G4, NONE),
PAD_NC(GPP_G5, NONE),
PAD_CFG_GPI(GPP_G6, NONE, DEEP), // SWI#_GPP_G6
PAD_NC(GPP_G7, NONE),
/* ------- GPIO Group GPP_H ------- */
PAD_CFG_NF(GPP_H0, NONE, DEEP, NF1), // WLAN_CLKREQ#
PAD_CFG_NF(GPP_H1, NONE, DEEP, NF1), // SD4.0_CLKREQ#
PAD_CFG_NF(GPP_H2, NONE, DEEP, NF1), // PEG_CLKREQ#
PAD_CFG_NF(GPP_H3, NONE, DEEP, NF1), // SSD1_CLKREQ#
PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1), // SSD2_CLKREQ#
PAD_NC(GPP_H5, NONE),
PAD_CFG_GPO(GPP_H6, 1, DEEP), // PCIE_SSD1_RST#
PAD_CFG_GPO(GPP_H7, 1, DEEP), // PCIE_SSD2_RST#
PAD_CFG_GPI(GPP_H8, NONE, DEEP), // GPP_H8_LAN_RST#
PAD_CFG_GPI(GPP_H9, NONE, DEEP), // TBT_GPIO_WAKE#
PAD_NC(GPP_H10, NONE),
PAD_NC(GPP_H11, NONE),
PAD_CFG_GPI(GPP_H12, NONE, DEEP), // ESPI FLASH SHARING STRAP
PAD_CFG_GPI(GPP_H13, NONE, DEEP), // TBTA_HRESET
PAD_NC(GPP_H14, NONE),
PAD_CFG_GPI(GPP_H15, NONE, DEEP), // RESERVED STRAP
_PAD_CFG_STRUCT(GPP_H16, 0x44000101, 0x0000), // TBT_RTD3_PWR_EN
PAD_CFG_GPO(GPP_H17, 0, PLTRST), // TBT_FORCE_PWR
PAD_NC(GPP_H18, NONE),
PAD_NC(GPP_H19, NONE),
PAD_NC(GPP_H20, NONE),
PAD_CFG_GPI(GPP_H21, NONE, DEEP), // XTAL FREQUENCY SELECT STRAP
PAD_NC(GPP_H22, NONE),
_PAD_CFG_STRUCT(GPP_H23, 0x82880100, 0x0000), // TBCIO_PLUG_EVENT#
/* ------- GPIO Group GPP_I ------- */
PAD_CFG_NF(GPP_I0, NONE, DEEP, NF1), // ANX7411_HPD
PAD_CFG_NF(GPP_I1, NONE, DEEP, NF1), // HDMI_HPD
PAD_CFG_NF(GPP_I2, NONE, DEEP, NF1), // MDP_E_HPD
PAD_CFG_NF(GPP_I3, NONE, DEEP, NF1), // MDP_A_TBT_HPD
PAD_CFG_NF(GPP_I4, NONE, DEEP, NF1), // SB_IEDP_HPD
PAD_CFG_GPO(GPP_I5, 1, DEEP), // TBT_GPIO_RST#
PAD_NC(GPP_I6, NONE),
PAD_NC(GPP_I7, NONE),
PAD_CFG_GPO(GPP_I8, 1, DEEP), // SSD1_PWR_EN
PAD_CFG_GPO(GPP_I9, 1, DEEP), // SSD2_PWR_EN
PAD_NC(GPP_I10, NONE),
PAD_NC(GPP_I11, NONE),
PAD_CFG_GPO(GPP_I12, 1, DEEP), // SATA_PWR_EN
PAD_NC(GPP_I13, NONE),
PAD_NC(GPP_I14, NONE),
/* ------- GPIO Group GPP_J ------- */
PAD_CFG_NF(GPP_J0, NONE, DEEP, NF1), // CNVI_GNSS_PA_BLANKING
PAD_CFG_GPO(GPP_J1, 1, DEEP), // GPP_J1
PAD_NC(GPP_J2, NONE),
PAD_NC(GPP_J3, NONE),
PAD_CFG_NF(GPP_J4, NONE, DEEP, NF1), // CNVI_BRI_DT
PAD_CFG_NF(GPP_J5, UP_20K, DEEP, NF1), // CNVI_BRI_RSP
PAD_CFG_NF(GPP_J6, NONE, DEEP, NF1), // CNVI_RGI_DT
PAD_CFG_NF(GPP_J7, UP_20K, DEEP, NF1), // CNVI_RGI_RSP
PAD_CFG_NF(GPP_J8, NONE, DEEP, NF1), // CNVI_MFUART2_RXD
PAD_CFG_NF(GPP_J9, NONE, DEEP, NF1), // CNVI_MFUART2_TXD
PAD_NC(GPP_J10, NONE),
PAD_NC(GPP_J11, DN_20K),
/* ------- GPIO Group GPP_K ------- */
PAD_CFG_GPO(GPP_K0, 0, DEEP), // GPP_K0_SPK_MUTE
PAD_CFG_GPO(GPP_K1, 0, DEEP), // GPP_K1_WOOFER_MUTE
PAD_NC(GPP_K2, NONE),
_PAD_CFG_STRUCT(GPP_K3, 0x40880100, 0x0000), // SCI#_GPP_K3
PAD_NC(GPP_K4, NONE),
PAD_NC(GPP_K5, NONE),
_PAD_CFG_STRUCT(GPP_K6, 0x40880100, 0x0000), // SWI#_GPP_K6
PAD_CFG_GPI(GPP_K7, NONE, DEEP), // GPP_K7_LAN_WAKEUP#
PAD_CFG_GPO(GPP_K8, 1, DEEP), // GPP_K8_LAN_RTD3
PAD_NC(GPP_K9, NONE),
PAD_NC(GPP_K10, NONE),
PAD_NC(GPP_K11, NONE),
PAD_CFG_GPO(GPP_K12, 1, DEEP), // PCH_GPP_K12
PAD_NC(GPP_K13, NONE),
PAD_CFG_GPO(GPP_K14, 0, DEEP), // GPP_K14_TEST_R
_PAD_CFG_STRUCT(GPP_K15, 0x80100100, 0x0000), // GPP_K15_INTP_OUT
PAD_NC(GPP_K16, NONE),
PAD_NC(GPP_K17, NONE),
PAD_CFG_GPO(GPP_K18, 1, DEEP), // GPP_K18_TBT_WAKE#
_PAD_CFG_STRUCT(GPP_K19, 0x42800101, 0x0000), // SMI#_GPP_K19
PAD_NC(GPP_K20, NONE),
PAD_NC(GPP_K21, NONE),
PAD_NC(GPP_K22, NONE),
PAD_NC(GPP_K23, NONE),
};
void variant_configure_gpios(void)
{
gpio_configure_pads(gpio_table, ARRAY_SIZE(gpio_table));
}

View File

@ -0,0 +1,16 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <soc/gpio.h>
#include <variant/gpio.h>
static const struct pad_config early_gpio_table[] = {
PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), // UART2_RXD
PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), // UART2_TXD
PAD_CFG_GPO(GPP_F22, 0, DEEP), // DGPU_RST#_PCH
PAD_CFG_GPO(GPP_F23, 0, DEEP), // DGPU_PWR_EN
};
void variant_configure_early_gpios(void)
{
gpio_configure_pads(early_gpio_table, ARRAY_SIZE(early_gpio_table));
}

View File

@ -0,0 +1,30 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/azalia_device.h>
const u32 cim_verb_data[] = {
/* Realtek, ALC1220 */
0x10ec1220, /* Vendor ID */
0x155865d1, /* Subsystem ID */
12, /* Number of entries */
AZALIA_SUBVENDOR(0, 0x155865d1),
AZALIA_PIN_CFG(0, 0x12, 0x90a60130), // DMIC
AZALIA_PIN_CFG(0, 0x14, 0x0421101f), // FRONT (Port-D)
AZALIA_PIN_CFG(0, 0x15, 0x40000000), // SURR (Port-A)
AZALIA_PIN_CFG(0, 0x16, 0x411111f0), // CENTER/LFE (Port-G)
AZALIA_PIN_CFG(0, 0x17, 0x411111f0), // SIDE (Port-H)
AZALIA_PIN_CFG(0, 0x18, 0x04a11040), // MIC1 (Port-B)
AZALIA_PIN_CFG(0, 0x19, 0x411111f0), // MIC2 (Port-F)
AZALIA_PIN_CFG(0, 0x1a, 0x411111f0), // LINE1 (Port-C)
AZALIA_PIN_CFG(0, 0x1b, 0x90170110), // LINE2 (Port-E)
AZALIA_PIN_CFG(0, 0x1d, 0x40b7952d), // PCBEEP
AZALIA_PIN_CFG(0, 0x1e, 0x04451150), // S/PDIF-OUT
};
const u32 pc_beep_verbs[] = {
// Enable DMIC microphone on ALC1220
0x02050036,
0x02042a6a,
};
AZALIA_ARRAY_SIZES;

View File

@ -0,0 +1,21 @@
chip soc/intel/cannonlake
# Serial I/O
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoPci, // Touchpad I2C bus
[PchSerialIoIndexUART2] = PchSerialIoPci, // Debug console
}"
device domain 0 on
subsystemid 0x1558 0x65d1 inherit
device pci 15.0 on # I2C #0
chip drivers/i2c/hid
register "generic.hid" = ""PNP0C50""
register "generic.desc" = ""Synaptics Touchpad""
register "generic.irq" = "ACPI_IRQ_EDGE_LOW(GPP_B3_IRQ)"
register "generic.probed" = "1"
register "hid_desc_reg_offset" = "0x20"
device i2c 2c on end
end
end
end
end

File diff suppressed because it is too large Load Diff