mb/google/nissa/var/nivviks: Use interrupt with lock for pen detect GPIO
With GPIO_DRIVER_LOCK kernel driver can't change to IRQ. Thus, we need to set it as INT in coreboot to make the IRQ work. BUG=b:223476974 TEST=evtest work as expected. Input driver version is 1.0.1 Input device ID: bus 0x19 vendor 0x1 product 0x1 version 0x100 Input device name: "PRP0001:00" Supported events: Event type 0 (EV_SYN) Event type 5 (EV_SW) Event code 15 (SW_PEN_INSERTED) state 0 Properties: Testing ... (interrupt to exit) Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 1 Event: -------------- SYN_REPORT ------------ Event: type 5 (EV_SW), code 15 (SW_PEN_INSERTED), value 0 Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I5f9fdfb2622b4b955da216119e74c6f7d5795d36 Reviewed-on: https://review.coreboot.org/c/coreboot/+/64091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
This commit is contained in:
parent
2e96eebf01
commit
6cb787b19a
|
@ -234,7 +234,7 @@ static const struct pad_config gpio_table[] = {
|
||||||
/* F12 : GSXDOUT ==> WWAN_RST_L */
|
/* F12 : GSXDOUT ==> WWAN_RST_L */
|
||||||
PAD_CFG_GPO_LOCK(GPP_F12, 1, LOCK_CONFIG),
|
PAD_CFG_GPO_LOCK(GPP_F12, 1, LOCK_CONFIG),
|
||||||
/* F13 : GSXSLOAD ==> SOC_PEN_DETECT_R_ODL */
|
/* F13 : GSXSLOAD ==> SOC_PEN_DETECT_R_ODL */
|
||||||
PAD_CFG_GPI_GPIO_DRIVER_LOCK(GPP_F13, NONE, LOCK_CONFIG),
|
PAD_CFG_GPI_INT_LOCK(GPP_F13, NONE, EDGE_BOTH, LOCK_CONFIG),
|
||||||
/* F14 : GSXDIN ==> TCHPAD_INT_ODL */
|
/* F14 : GSXDIN ==> TCHPAD_INT_ODL */
|
||||||
PAD_CFG_GPI_IRQ_WAKE_LOCK(GPP_F14, NONE, LEVEL, INVERT, LOCK_CONFIG),
|
PAD_CFG_GPI_IRQ_WAKE_LOCK(GPP_F14, NONE, LEVEL, INVERT, LOCK_CONFIG),
|
||||||
/* F15 : GSXSRESET# ==> SOC_PEN_DETECT_ODL */
|
/* F15 : GSXSRESET# ==> SOC_PEN_DETECT_ODL */
|
||||||
|
|
Loading…
Reference in New Issue