GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mb/msi/ms7d25: Enable displays 

Add VBT from vendor firmware v5.24 and configure display outputs in
devicetree.

TEST=Boot TianoCore UEFIPayload and notice the UEFI Shell on the
connected display via HDMI or DisplayPort on rear panel.

Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ide560ade5e29844c2f4310639fe5b76ba91865be
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63507
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
This commit is contained in:
Michał Żygowski 2022-04-08 19:02:42 +02:00 committed by Felix Held
parent 02db6b4049
commit 6cf9b8f8ac
3 changed files with 12 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
src/mainboard/msi/ms7d25/Kconfig
View File

@ -10,6 +10,7 @@ config BOARD_MSI_MS7D25
select DRIVERS_UART_8250IO
select HAVE_ACPI_RESUME
select HAVE_ACPI_TABLES
select INTEL_GMA_HAVE_VBT
if BOARD_MSI_MS7D25

BIN
src/mainboard/msi/ms7d25/data.vbt Normal file
View File

Binary file not shown.

11
src/mainboard/msi/ms7d25/devicetree.cb
View File

@ -70,6 +70,17 @@ chip soc/intel/alderlake
[7] = 1,
}"
# HDMI on port B
register "ddi_portB_config" = "1"
register "ddi_ports_config" = "{
[DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
[DDI_PORT_C] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
[DDI_PORT_1] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
[DDI_PORT_2] = DDI_ENABLE_HPD,
[DDI_PORT_3] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
[DDI_PORT_4] = DDI_ENABLE_HPD,
}"
device domain 0 on
device ref igpu on end
device ref crashlog off end