mainboard/intel/galileo: Enable SD flash cards
Turn on the SD controller to allow it to claim resources. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file: * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Build EDK2 CorebootPayloadPkg/CorebootPayloadPkgIa32.dsc to generate UEFIPAYLOAD.fd * Edit .config file and add the following lines: * CONFIG_PAYLOAD_ELF=y * CONFIG_PAYLOAD_FILE="path to UEFIPAYLOAD.fd" * Testing successful when at the UEFI shell prompt: * After issuing: * "connect -r" * "map -r" * The "dir" command displays the contents of the SD flash card * The "drivers" command shows an SD host and SD media connection Change-Id: I883dc87270045786ddb931bea83fc36646a128e6 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13894 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
This commit is contained in:
parent
fcfa94d6e8
commit
6d3cd08252
|
@ -19,7 +19,7 @@ chip soc/intel/quark
|
|||
device domain 0 on
|
||||
# EDS Table 3
|
||||
device pci 00.0 on end # 8086 0958 - Host Bridge
|
||||
device pci 14.0 off end # 8086 08A7 - SD/SDIO/eMMC controller
|
||||
device pci 14.0 on end # 8086 08A7 - SD/SDIO/eMMC controller
|
||||
device pci 14.1 off end # 8086 0936 - HSUART 0
|
||||
device pci 14.2 off end # 8086 0939 - USB 2.0 Device port
|
||||
device pci 14.3 on end # 8086 0939 - USB EHCI Host controller
|
||||
|
|
Loading…
Reference in New Issue