SeaBIOS/Kconfig: Remove SEABIOS_MALLOC_UPPERMEMORY option

This has been replaced by the PAYLOAD_CONFIGFILE option, allowing
any SeaBIOS config option to be set by a platform.

Change-Id: I584c4c481266740840158baba76581d68e69b448
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12570
Tested-by: build bot (Jenkins)
Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
This commit is contained in:
Martin Roth 2015-11-28 16:32:25 -07:00
parent c6a8d2ca7b
commit 6e1192019e
3 changed files with 1 additions and 17 deletions

View File

@ -54,8 +54,7 @@ seabios:
CONFIG_SEABIOS_THREAD_OPTIONROMS=$(CONFIG_SEABIOS_THREAD_OPTIONROMS) \
CONFIG_SEABIOS_VGA_COREBOOT=$(CONFIG_SEABIOS_VGA_COREBOOT) \
CONFIG_CONSOLE_SERIAL=$(CONFIG_CONSOLE_SERIAL) \
CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE) \
CONFIG_SEABIOS_MALLOC_UPPERMEMORY=$(CONFIG_SEABIOS_MALLOC_UPPERMEMORY)
CONFIG_TTYS0_BASE=$(CONFIG_TTYS0_BASE)
payloads/external/SeaBIOS/seabios/out/vgabios.bin: seabios
payloads/external/SeaBIOS/seabios/out/bios.bin.elf: seabios

View File

@ -35,18 +35,6 @@ config SEABIOS_THREAD_OPTIONROMS
variations during option ROM code execution. It is not
known if all option ROMs will behave properly with this option.
config SEABIOS_MALLOC_UPPERMEMORY
bool
default y
help
Use the "Upper Memory Block" area (0xc0000-0xf0000) for internal
"low memory" allocations. If this is not selected, the memory is
instead allocated from the "9-segment" (0x90000-0xa0000).
This is not typically needed, but may be required on some platforms
to allow USB and SATA buffers to be written correctly by the
hardware. In general, if this is desired, the option will be
set to 'N' by the chipset Kconfig.
config SEABIOS_VGA_COREBOOT
prompt "Include generated option rom that implements legacy VGA BIOS compatibility"
default n

View File

@ -31,9 +31,6 @@ ifeq ($(CONFIG_CONSOLE_SERIAL),y)
else
echo "# CONFIG_DEBUG_SERIAL is not set" >> seabios/.config
endif
ifneq ($(CONFIG_SEABIOS_MALLOC_UPPERMEMORY),y)
echo "# CONFIG_MALLOC_UPPERMEMORY is not set" >> seabios/.config
endif
ifneq ($(CONFIG_SEABIOS_THREAD_OPTIONROMS),y)
echo "# CONFIG_THREAD_OPTIONROMS is not set" >> seabios/.config
endif