Add TINY_BOOTBLOCK support for AMD SB700.

Factor out the ROM decode enable functionality into bootblock.c and
handle it via the usual TINY_BOOTBLOCK mechanism.

Use "select TINY_BOOTBLOCK" in the southbridge, not individual boards.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6159 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

src/mainboard/amd/mahogany_fam10/Kconfig

@@ -25,7 +25,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select BOARD_ROMSIZE_KB_1024
 	select RAMINIT_SYSINFO
 	select ENABLE_APIC_EXT_ID
-	select TINY_BOOTBLOCK
 	select GFXUMA
 	select QRANK_DIMM_SUPPORT
 

src/mainboard/amd/tilapia_fam10/Kconfig

@@ -25,7 +25,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select BOARD_ROMSIZE_KB_1024
 	select RAMINIT_SYSINFO
 	select ENABLE_APIC_EXT_ID
-	select TINY_BOOTBLOCK
 	select GFXUMA
 	select QRANK_DIMM_SUPPORT
 

src/mainboard/asus/m4a78-em/Kconfig

@@ -23,7 +23,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select BOARD_ROMSIZE_KB_1024
 	select RAMINIT_SYSINFO
 	select ENABLE_APIC_EXT_ID
-	select TINY_BOOTBLOCK
 	select GFXUMA
 	select QRANK_DIMM_SUPPORT
 

src/mainboard/asus/m4a785-m/Kconfig

@@ -24,7 +24,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select BOARD_ROMSIZE_KB_1024
 	select RAMINIT_SYSINFO
 	select ENABLE_APIC_EXT_ID
-	select TINY_BOOTBLOCK
 	select GFXUMA
 	select QRANK_DIMM_SUPPORT
 

src/mainboard/gigabyte/ma785gmt/Kconfig

@@ -24,7 +24,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_ACPI_TABLES
 	select BOARD_ROMSIZE_KB_1024
 	select ENABLE_APIC_EXT_ID
-	select TINY_BOOTBLOCK
 	select GFXUMA
 	select RAMINIT_SYSINFO
 	select QRANK_DIMM_SUPPORT

src/mainboard/gigabyte/ma78gm/Kconfig

@@ -24,7 +24,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select HAVE_ACPI_TABLES
 	select BOARD_ROMSIZE_KB_1024
 	select ENABLE_APIC_EXT_ID
-	select TINY_BOOTBLOCK
 	select GFXUMA
 	select RAMINIT_SYSINFO
 	select QRANK_DIMM_SUPPORT

src/mainboard/iei/kino-780am2-fam10/Kconfig

@@ -25,7 +25,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select BOARD_ROMSIZE_KB_1024
 	select RAMINIT_SYSINFO
 	select ENABLE_APIC_EXT_ID
-	select TINY_BOOTBLOCK
 	select GFXUMA
 	select QRANK_DIMM_SUPPORT
 

src/mainboard/jetway/pa78vm5/Kconfig

@@ -25,7 +25,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy
 	select BOARD_ROMSIZE_KB_1024
 	select RAMINIT_SYSINFO
 	select ENABLE_APIC_EXT_ID
-	select TINY_BOOTBLOCK
 	select GFXUMA
 	select QRANK_DIMM_SUPPORT
 

src/southbridge/amd/sb700/Kconfig

@@ -21,6 +21,7 @@ config SOUTHBRIDGE_AMD_SB700
 	bool
 	select IOAPIC
 	select HAVE_USBDEBUG
+	select TINY_BOOTBLOCK
 
 config SOUTHBRIDGE_AMD_SB700_SKIP_ISA_DMA_INIT
 	bool

src/southbridge/amd/sb700/bootblock.c

@@ -0,0 +1,69 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
+#include <device/pci_ids.h>
+
+/*
+ * Enable 1MB (LPC) ROM access at 0xFFF00000 - 0xFFFFFFFF.
+ *
+ * Hardware should enable LPC ROM by pin straps. This function does not
+ * handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations.
+ *
+ * The SB700 power-on default is to map 256K ROM space.
+ *
+ * Details: AMD SB700/710/750 BIOS Developer's Guide (BDG), Rev. 1.00,
+ *          PN 43366_sb7xx_bdg_pub_1.00, June 2009, section 3.1, page 14.
+ */
+static void sb700_enable_rom(void)
+{
+	u8 reg8;
+	device_t dev;
+
+	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_ATI,
+				PCI_DEVICE_ID_ATI_SB700_LPC), 0);
+
+	/* Decode variable LPC ROM address ranges 1 and 2. */
+	reg8 = pci_read_config8(dev, 0x48);
+	reg8 |= (1 << 3) | (1 << 4);
+	pci_write_config8(dev, 0x48, reg8);
+
+	/* LPC ROM address range 1: */
+	/* Enable LPC ROM range mirroring start at 0x000e(0000). */
+	pci_write_config16(dev, 0x68, 0x000e);
+	/* Enable LPC ROM range mirroring end at 0x000f(ffff). */
+	pci_write_config16(dev, 0x6a, 0x000f);
+
+	/* LPC ROM address range 2: */
+	/*
+	 * Enable LPC ROM range start at:
+	 * 0xfff8(0000): 512KB
+	 * 0xfff0(0000): 1MB
+	 */
+	pci_write_config16(dev, 0x6c, 0xfff0); /* 1 MB */
+	/* Enable LPC ROM range end at 0xffff(ffff). */
+	pci_write_config16(dev, 0x6e, 0xffff);
+}
+
+static void bootblock_southbridge_init(void)
+{
+	sb700_enable_rom();
+}

src/southbridge/amd/sb700/early_setup.c

@@ -92,7 +92,6 @@ static u8 set_sb700_revision(void)
 *	Serial port 0
 *	KBC Port
 *	ACPI Micro-controller port
-*	LPC ROM size
 *	This function does not change port 0x80 decoding.
 *	Console output through any port besides 0x3f8 is unsupported.
 *	If you use FWH ROMs, you have to setup IDSEL.
@@ -134,27 +133,13 @@ static void sb700_lpc_init(void)
 	reg8 |= 1 << 0;
 	pci_write_config8(dev, 0xbb, reg8);
 
-	/* SuperIO, LPC ROM */
+	/* Super I/O, RTC */
 	reg8 = pci_read_config8(dev, 0x48);
 	/* Decode ports 0x2e-0x2f, 0x4e-0x4f (SuperI/O configuration) */
 	reg8 |= (1 << 1) | (1 << 0);
-	/* Decode variable LPC ROM address ranges 1&2 (see register 0x68-0x6b, 0x6c-0x6f) */
-	reg8 |= (1 << 3) | (1 << 4);
 	/* Decode port 0x70-0x73 (RTC) */
-	reg8 |= 1 << 6;
+	reg8 |= (1 << 6);
 	pci_write_config8(dev, 0x48, reg8);
-
-	/* hardware should enable LPC ROM by pin straps */
-	/* ROM access at 0xFFF80000/0xFFF00000 - 0xFFFFFFFF */
-	/* See detail in 43366_sb700_bdg_nda_1.01.pdf page 17. */
-	/* enable LPC ROM range mirroring start 0x000e(0000) */
-	pci_write_config16(dev, 0x68, 0x000e);
-	/* enable LPC ROM range mirroring end   0x000f(ffff) */
-	pci_write_config16(dev, 0x6a, 0x000f);
-	/* enable LPC ROM range start, 0xfff8(0000): 512KB, 0xfff0(0000): 1MB */
-	pci_write_config16(dev, 0x6c, 0xfff0);
-	/* enable LPC ROM range end at 0xffff(ffff) */
-	pci_write_config16(dev, 0x6e, 0xffff);
 }
 
 /* what is its usage? */
@@ -403,13 +388,12 @@ static void sb700_devices_por_init(void)
 	pci_write_config8(dev, 0x46, 0xC3);
 	pci_write_config8(dev, 0x47, 0xFF);
 
+	// TODO: This has already been done(?)
 	/* IO/Mem Port Decode Enable, I don't know why CIM disable some ports.
 	 *  Disable LPC TimeOut counter, enable SuperIO Configuration Port (2e/2f),
-	 * Alternate SuperIO Configuration Port (4e/4f), Wide Generic IO Port (64/65).
+	 * Alternate Super I/O Configuration Port (4e/4f), Wide Generic IO Port (64/65). */
-	 * Enable bits for LPC ROM memory address range 1&2 for 1M ROM setting.*/
 	byte = pci_read_config8(dev, 0x48);
 	byte |= (1 << 1) | (1 << 0);	/* enable Super IO config port 2e-2h, 4e-4f */
-	byte |= (1 << 3) | (1 << 4);	/* enable for LPC ROM address range1&2, Enable 512KB rom access at 0xFFF80000 - 0xFFFFFFFF */
 	byte |= 1 << 6;		/* enable for RTC I/O range */
 	pci_write_config8(dev, 0x48, byte);
 	pci_write_config8(dev, 0x49, 0xFF);
@@ -418,12 +402,6 @@ static void sb700_devices_por_init(void)
 	byte |= ((1 << 1) + (1 << 6));	/*0x42, save the configuraion for port 0x80. */
 	pci_write_config8(dev, 0x4A, byte);
 
-	/* Set LPC ROM size, it has been done in sb700_lpc_init().
-	 * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB;
-	 * enable LPC ROM range, 0xfff8: 512KB, 0xfff0: 1MB
-	 * pci_write_config16(dev, 0x68, 0x000e)
-	 * pci_write_config16(dev, 0x6c, 0xfff0);*/
-
 	/* Enable Tpm12_en and Tpm_legacy. I don't know what is its usage and copied from CIM. */
 	pci_write_config8(dev, 0x7C, 0x05);