mb/google/brya/variants/crota: init overridetree for crota
init overridetree.cb based on the schematic bernadino 14 adl-p 20220112.pdf BUG=b:226315394 Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: Ibca9d93a81469730e472a645c607a97a624e9a1c Reviewed-on: https://review.coreboot.org/c/coreboot/+/63022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
Terry Chen
Paul Fagerburg
parent
ebd6dec110
commit
707eaced71
|
|
@ -179,6 +179,7 @@ config BOARD_GOOGLE_BANSHEE
|
||||||
config BOARD_GOOGLE_CROTA
|
config BOARD_GOOGLE_CROTA
|
||||||
bool "-> Crota"
|
bool "-> Crota"
|
||||||
select BOARD_GOOGLE_BASEBOARD_BRYA
|
select BOARD_GOOGLE_BASEBOARD_BRYA
|
||||||
|
select DRIVERS_I2C_CS42L42
|
||||||
|
|
||||||
config BOARD_GOOGLE_MOLI
|
config BOARD_GOOGLE_MOLI
|
||||||
bool "-> Moli"
|
bool "-> Moli"
|
||||||
|
|
|
||||||
|
|
@ -1,6 +1,314 @@
|
||||||
|
fw_config
|
||||||
|
field MB_SD 0 1
|
||||||
|
option SD_ABSENT 0
|
||||||
|
option SD_GL9750 1
|
||||||
|
end
|
||||||
|
field KB_BL 2 2
|
||||||
|
option KB_BL_ABSENT 0
|
||||||
|
option KB_BL_PRESENT 1
|
||||||
|
end
|
||||||
|
field AUDIO 3 5
|
||||||
|
option AUDIO_UNKNOWN 0
|
||||||
|
option MAX98360_CS42L42 1
|
||||||
|
end
|
||||||
|
field DB_LTE 6 7
|
||||||
|
option LTE_ABSENT 0
|
||||||
|
option LTE_USB 1
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
||||||
chip soc/intel/alderlake
|
chip soc/intel/alderlake
|
||||||
|
|
||||||
device domain 0 on
|
# Acoustic settings
|
||||||
end
|
register "acoustic_noise_mitigation" = "1"
|
||||||
|
register "slow_slew_rate[VR_DOMAIN_IA]" = "SLEW_FAST_4"
|
||||||
|
register "slow_slew_rate[VR_DOMAIN_GT]" = "SLEW_FAST_4"
|
||||||
|
register "fast_pkg_c_ramp_disable[VR_DOMAIN_IA]" = "1"
|
||||||
|
register "fast_pkg_c_ramp_disable[VR_DOMAIN_GT]" = "1"
|
||||||
|
|
||||||
|
# Intel Common SoC Config
|
||||||
|
#+-------------------+---------------------------+
|
||||||
|
#| Field | Value |
|
||||||
|
#+-------------------+---------------------------+
|
||||||
|
#| GSPI1 | Fingerprint MCU |
|
||||||
|
#| I2C0 | Audio |
|
||||||
|
#| I2C1 | cr50 TPM. Early init is |
|
||||||
|
#| | required to set up a BAR |
|
||||||
|
#| | for TPM communication |
|
||||||
|
#| I2C2 | |
|
||||||
|
#| I2C3 | Touchscreen |
|
||||||
|
#| I2C5 | Trackpad |
|
||||||
|
#+-------------------+---------------------------+
|
||||||
|
register "common_soc_config" = "{
|
||||||
|
.i2c[0] = {
|
||||||
|
.speed = I2C_SPEED_FAST,
|
||||||
|
},
|
||||||
|
.i2c[1] = {
|
||||||
|
.early_init = 1,
|
||||||
|
.speed = I2C_SPEED_FAST,
|
||||||
|
.rise_time_ns = 600,
|
||||||
|
.fall_time_ns = 400,
|
||||||
|
.data_hold_time_ns = 50,
|
||||||
|
},
|
||||||
|
.i2c[2] = {
|
||||||
|
.speed = I2C_SPEED_FAST,
|
||||||
|
},
|
||||||
|
.i2c[3] = {
|
||||||
|
.speed = I2C_SPEED_FAST,
|
||||||
|
.rise_time_ns = 650,
|
||||||
|
.fall_time_ns = 400,
|
||||||
|
.data_hold_time_ns = 50,
|
||||||
|
},
|
||||||
|
.i2c[5] = {
|
||||||
|
.speed = I2C_SPEED_FAST,
|
||||||
|
},
|
||||||
|
}"
|
||||||
|
|
||||||
|
register "usb2_ports[1]" = "USB2_PORT_EMPTY" # Disable USB2_C1
|
||||||
|
register "usb2_ports[4]" = "USB2_PORT_EMPTY" # Disable USB2_C4
|
||||||
|
register "usb2_ports[6]" = "USB2_PORT_EMPTY" # Disable USB2_C6
|
||||||
|
register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)" # Type-A MLB Port
|
||||||
|
register "usb2_ports[8]" = "USB2_PORT_EMPTY" # Disable USB2_C8
|
||||||
|
register "usb3_ports[0]" = "USB3_PORT_EMPTY"
|
||||||
|
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3/2 Type A MLB port
|
||||||
|
register "tcss_ports[1]" = "TCSS_PORT_EMPTY"
|
||||||
|
|
||||||
|
device domain 0 on
|
||||||
|
device ref cnvi_wifi on
|
||||||
|
chip drivers/wifi/generic
|
||||||
|
register "wake" = "GPE0_PME_B0"
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pcie_rp3 on
|
||||||
|
chip soc/intel/common/block/pcie/rtd3
|
||||||
|
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_B3)"
|
||||||
|
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E20)"
|
||||||
|
register "srcclk_pin" = "1"
|
||||||
|
device generic 0 alias emmc_rtd3 on end
|
||||||
|
end
|
||||||
|
# Enable PCIe-to-eMMC bridge PCIE 3 using clk 1
|
||||||
|
register "pch_pcie_rp[PCH_RP(3)]" = "{
|
||||||
|
.clk_src = 1,
|
||||||
|
.clk_req = 1,
|
||||||
|
.flags = PCIE_RP_LTR | PCIE_RP_AER,
|
||||||
|
}"
|
||||||
|
end #PCIE3 BH799BB
|
||||||
|
device ref tcss_dma0 on
|
||||||
|
chip drivers/intel/usb4/retimer
|
||||||
|
register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
|
||||||
|
use tcss_usb3_port1 as dfp[0].typec_port
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref tcss_dma1 on
|
||||||
|
chip drivers/intel/usb4/retimer
|
||||||
|
register "dfp[0].power_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_E4)"
|
||||||
|
use tcss_usb3_port3 as dfp[0].typec_port
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pcie_rp6 off end #PCIE6 WWAN
|
||||||
|
device ref pcie_rp8 on
|
||||||
|
chip soc/intel/common/block/pcie/rtd3
|
||||||
|
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_H13)"
|
||||||
|
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D18)"
|
||||||
|
register "srcclk_pin" = "3"
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end #PCIE8 SD card
|
||||||
|
device ref pcie4_0 on
|
||||||
|
# Enable CPU PCIE RP 1 using CLK 1
|
||||||
|
register "cpu_pcie_rp[CPU_RP(1)]" = "{
|
||||||
|
.clk_req = 1,
|
||||||
|
.clk_src = 1,
|
||||||
|
.flags = PCIE_RP_LTR | PCIE_RP_AER,
|
||||||
|
}"
|
||||||
|
end
|
||||||
|
device ref i2c0 on
|
||||||
|
chip drivers/i2c/cs42l42
|
||||||
|
register "irq" = "ACPI_IRQ_LEVEL_LOW(GPP_A23_IRQ)"
|
||||||
|
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B13)"
|
||||||
|
register "ts_inv" = "true"
|
||||||
|
register "ts_dbnc_rise" = "RISE_DEB_1000_MS"
|
||||||
|
register "ts_dbnc_fall" = "FALL_DEB_0_MS"
|
||||||
|
register "btn_det_init_dbnce" = "100"
|
||||||
|
register "btn_det_event_dbnce" = "10"
|
||||||
|
register "bias_lvls[0]" = "15"
|
||||||
|
register "bias_lvls[1]" = "8"
|
||||||
|
register "bias_lvls[2]" = "4"
|
||||||
|
register "bias_lvls[3]" = "1"
|
||||||
|
register "hs_bias_ramp_rate" = "HSBIAS_RAMP_SLOW"
|
||||||
|
register "hs_bias_sense_disable" = "true"
|
||||||
|
device i2c 48 on end
|
||||||
|
end
|
||||||
|
end #I2C0
|
||||||
|
device ref i2c1 on
|
||||||
|
chip drivers/i2c/tpm
|
||||||
|
register "hid" = ""GOOG0005""
|
||||||
|
register "irq" = "ACPI_IRQ_EDGE_LOW(GPP_A13_IRQ)"
|
||||||
|
device i2c 50 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref i2c3 on
|
||||||
|
chip drivers/i2c/hid
|
||||||
|
register "generic.hid" = ""ELAN9050""
|
||||||
|
register "generic.desc" = ""ELAN Touchscreen""
|
||||||
|
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
|
||||||
|
register "generic.probed" = "1"
|
||||||
|
register "generic.reset_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
|
||||||
|
register "generic.reset_delay_ms" = "300"
|
||||||
|
register "generic.reset_off_delay_ms" = "1"
|
||||||
|
register "generic.enable_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
|
||||||
|
register "generic.enable_delay_ms" = "6"
|
||||||
|
register "generic.stop_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
|
||||||
|
register "generic.stop_off_delay_ms" = "1"
|
||||||
|
register "generic.has_power_resource" = "1"
|
||||||
|
register "generic.disable_gpio_export_in_crs" = "1"
|
||||||
|
register "hid_desc_reg_offset" = "0x01"
|
||||||
|
device i2c 0x10 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref i2c5 on
|
||||||
|
chip drivers/i2c/generic
|
||||||
|
register "hid" = ""ELAN0000""
|
||||||
|
register "desc" = ""ELAN Touchpad""
|
||||||
|
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
|
||||||
|
register "wake" = "GPE0_DW2_14"
|
||||||
|
register "probed" = "1"
|
||||||
|
device i2c 15 on end
|
||||||
|
end
|
||||||
|
chip drivers/i2c/hid
|
||||||
|
register "generic.hid" = ""GXTP7288""
|
||||||
|
register "generic.desc" = ""Goodix Touchpad""
|
||||||
|
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_F14_IRQ)"
|
||||||
|
register "generic.wake" = "GPE0_DW2_14"
|
||||||
|
register "generic.probed" = "1"
|
||||||
|
register "hid_desc_reg_offset" = "0x01"
|
||||||
|
device i2c 2c on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref hda on
|
||||||
|
chip drivers/generic/max98357a
|
||||||
|
register "hid" = ""MX98360A""
|
||||||
|
register "sdmode_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
|
||||||
|
register "sdmode_delay" = "5"
|
||||||
|
device generic 0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref gspi1 on
|
||||||
|
chip drivers/spi/acpi
|
||||||
|
register "name" = ""CRFP""
|
||||||
|
register "hid" = "ACPI_DT_NAMESPACE_HID"
|
||||||
|
register "uid" = "1"
|
||||||
|
register "compat_string" = ""google,cros-ec-spi""
|
||||||
|
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F15_IRQ)"
|
||||||
|
register "wake" = "GPE0_DW2_15"
|
||||||
|
device spi 0 on end
|
||||||
|
end # FPMCU
|
||||||
|
end
|
||||||
|
device ref pch_espi on
|
||||||
|
chip ec/google/chromeec
|
||||||
|
use conn0 as mux_conn[0]
|
||||||
|
use conn1 as mux_conn[1]
|
||||||
|
device pnp 0c09.0 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref pmc hidden
|
||||||
|
chip drivers/intel/pmc_mux
|
||||||
|
device generic 0 on
|
||||||
|
chip drivers/intel/pmc_mux/conn
|
||||||
|
use usb2_port1 as usb2_port
|
||||||
|
use tcss_usb3_port1 as usb3_port
|
||||||
|
device generic 0 alias conn0 on end
|
||||||
|
end
|
||||||
|
chip drivers/intel/pmc_mux/conn
|
||||||
|
use usb2_port3 as usb2_port
|
||||||
|
use tcss_usb3_port3 as usb3_port
|
||||||
|
device generic 1 alias conn1 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref tcss_xhci on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
device ref tcss_root_hub on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-C Port C0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
|
||||||
|
device ref tcss_usb3_port1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-C Port C2 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))"
|
||||||
|
device ref tcss_usb3_port3 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device ref xhci on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
device ref xhci_root_hub on
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-C Port C0 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
|
||||||
|
device ref usb2_port1 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-C Port C2 (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, RIGHT, ACPI_PLD_GROUP(2, 1))"
|
||||||
|
device ref usb2_port3 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 WWAN""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
device ref usb2_port4 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Camera""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
device ref usb2_port6 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Type-A Port (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_A"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))"
|
||||||
|
device ref usb2_port8 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB2 Bluetooth""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
register "reset_gpio" =
|
||||||
|
"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
|
||||||
|
device ref usb2_port10 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 Type-A Port (MLB)""
|
||||||
|
register "type" = "UPC_TYPE_USB3_A"
|
||||||
|
register "use_custom_pld" = "true"
|
||||||
|
register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, LEFT, ACPI_PLD_GROUP(3, 1))"
|
||||||
|
device ref usb3_port2 on end
|
||||||
|
end
|
||||||
|
chip drivers/usb/acpi
|
||||||
|
register "desc" = ""USB3 WWAN""
|
||||||
|
register "type" = "UPC_TYPE_INTERNAL"
|
||||||
|
device ref usb3_port4 on end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
end
|
end
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue