GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Clean up vt8235_early_smbus a bit. 

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2038 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Jonathan McDowell 2005-09-14 16:18:30 +00:00
parent 85793c2b3f
commit 708743379a
1 changed files with 12 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

42
src/southbridge/via/vt8235/vt8235_early_smbus.c
View File

@ -30,59 +30,41 @@ static void enable_smbus(void)
device_t dev; device_t dev;
unsigned char c; unsigned char c;
int i; int i;
/* Power management controller */ /* Power management controller */
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235), 0); dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
PCI_DEVICE_ID_VIA_8235), 0);
if (dev == PCI_DEV_INVALID) { if (dev == PCI_DEV_INVALID) {
die("SMBUS controller not found\r\n"); die("SMBUS controller not found\r\n");
} }
pci_write_config8(dev, 0xd2, (0x4 << 1 ));
// set IO base address to SMBUS_IO_BASE // set IO base address to SMBUS_IO_BASE
pci_write_config16(dev, 0xd0, SMBUS_IO_BASE); pci_write_config16(dev, 0xd0, SMBUS_IO_BASE | 1);
// Enable SMBus // Enable SMBus
pci_write_config8(dev, 0xd2, (0x4 << 1)|1); pci_write_config8(dev, 0xd2, (0x4 << 1) | 1);
// Enable RTC
pci_write_config8(dev,0x51,0x04);
/* make it work for I/O ... /* make it work for I/O ...
*/ */
pci_write_config16(dev, 4, 1); pci_write_config16(dev, 4, 1);
/* tell the world we're alive - make power led flash during bios execution */
pci_write_config8(dev,0x94,0xb2);
/* FIX for half baud rate problem */ /* FIX for half baud rate problem */
/* let clocks and the like settle */ /* let clocks and the like settle */
/* as yet arbitrary count - 1000 is too little 5000 works */ /* as yet arbitrary count - 1000 is too little 5000 works */
for(i = 0 ; i < 5000 ; i++) for(i = 0 ; i < 5000 ; i++)
outb(0x80,0x80); outb(0x80,0x80);
/* southbridge doesn't seem to like to do much untill after this delay, so set up /*
* the flashing power LED again */ * The VT1211 serial port needs 48 mhz clock, on power up it is getting
pci_write_config8(dev,0x94,0xb2); * only 24 mhz, there is some mysterious device on the smbus that can
* fix this...this code below does it.
/* The VT1211 serial port needs 48 mhz clock, on power up it is getting * */
only 24 mhz, there is some mysterious device on the smbus that can
fix this...this code below does it. */
outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT); outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
outb(0xff, SMBUS_IO_BASE+SMBHSTSTAT);
for( ;;) {
c = inb(SMBUS_IO_BASE+SMBHSTSTAT);
if ((c & 1) == 0)
break;
}
outb(0x7f, SMBUS_IO_BASE+SMBHSTDAT0); outb(0x7f, SMBUS_IO_BASE+SMBHSTDAT0);
outb(0x83, SMBUS_IO_BASE+SMBHSTCMD); outb(0x83, SMBUS_IO_BASE+SMBHSTCMD);
outb(CLOCK_SLAVE_ADDRESS<<1 , SMBUS_IO_BASE+SMBXMITADD); outb(CLOCK_SLAVE_ADDRESS<<1 , SMBUS_IO_BASE+SMBXMITADD);
outb(8 | I2C_TRANS_CMD, SMBUS_IO_BASE+SMBHSTCTL); outb(8 | I2C_TRANS_CMD, SMBUS_IO_BASE+SMBHSTCTL);
for (;;) { for (;;) {
c = inb(SMBUS_IO_BASE+SMBHSTSTAT); c = inb(SMBUS_IO_BASE+SMBHSTSTAT);