mb/google/hatch: Create moonbuggy variant

Create the moonbuggy variant of the puff reference board by copying
the template files to a new directory named for the variant.

(Auto-Generated by create_coreboot_variant.sh version 4.5.0).

BUG=191356135
BRANCH=None
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_MOONBUGGY

Signed-off-by: Rehan Ghori <rehang@google.com>
Change-Id: Iaf545dcd5ff537afdf029f510553d16a1239763e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
This commit is contained in:
Rehan Ghori 2021-08-18 15:34:20 -04:00 committed by Tim Wawrzynczak
parent 6b74434414
commit 711b6c5c2d
7 changed files with 618 additions and 0 deletions

View File

@ -133,6 +133,7 @@ config MAINBOARD_PART_NUMBER
default "Ambassador" if BOARD_GOOGLE_AMBASSADOR
default "Genesis" if BOARD_GOOGLE_GENESIS
default "Scout" if BOARD_GOOGLE_SCOUT
default "Moonbuggy" if BOARD_GOOGLE_MOONBUGGY
config OVERRIDE_DEVICETREE
default "variants/helios_diskswap/overridetree.cb" if BOARD_GOOGLE_HELIOS_DISKSWAP
@ -167,6 +168,7 @@ config VARIANT_DIR
default "ambassador" if BOARD_GOOGLE_AMBASSADOR
default "genesis" if BOARD_GOOGLE_GENESIS
default "scout" if BOARD_GOOGLE_SCOUT
default "moonbuggy" if BOARD_GOOGLE_MOONBUGGY
config VBOOT
select HAS_RECOVERY_MRC_CACHE

View File

@ -109,3 +109,7 @@ config BOARD_GOOGLE_GENESIS
config BOARD_GOOGLE_SCOUT
bool "-> Scout"
select BOARD_GOOGLE_BASEBOARD_PUFF
config BOARD_GOOGLE_MOONBUGGY
bool "-> Moonbuggy"
select BOARD_GOOGLE_BASEBOARD_PUFF

View File

@ -0,0 +1,4 @@
## SPDX-License-Identifier: GPL-2.0-only
ramstage-y += gpio.c
bootblock-y += gpio.c

View File

@ -0,0 +1,115 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <baseboard/gpio.h>
#include <baseboard/variants.h>
#include <commonlib/helpers.h>
static const struct pad_config gpio_table[] = {
/* A16 : SD_OC_ODL */
PAD_CFG_GPI(GPP_A16, NONE, DEEP),
/* A18 : LAN_PE_ISOLATE_ODL */
PAD_CFG_GPO(GPP_A18, 1, DEEP),
/* A23 : M2_WLAN_INT_ODL */
PAD_CFG_GPI_APIC(GPP_A23, NONE, PLTRST, LEVEL, INVERT),
/* B5 : LAN_CLKREQ_ODL */
PAD_CFG_NF(GPP_B5, NONE, DEEP, NF1),
/* C0 : SMBCLK */
PAD_CFG_NF(GPP_C0, NONE, DEEP, NF1),
/* C1 : SMBDATA */
PAD_CFG_NF(GPP_C1, NONE, DEEP, NF1),
/* C6: M2_WLAN_WAKE_ODL */
PAD_CFG_GPI_SCI_LOW(GPP_C6, NONE, DEEP, EDGE_SINGLE),
/* C7 : LAN_WAKE_ODL */
PAD_CFG_GPI_SCI_LOW(GPP_C7, NONE, DEEP, EDGE_SINGLE),
/* C10 : PCH_PCON_RST_ODL */
PAD_CFG_GPO(GPP_C10, 1, DEEP),
/* C11 : PCH_PCON_PDB_ODL */
PAD_CFG_GPO(GPP_C11, 1, DEEP),
/* C15 : WLAN_OFF_L */
PAD_CFG_GPO(GPP_C15, 1, DEEP),
/* E2 : EN_PP_MST_OD */
PAD_CFG_GPO(GPP_E2, 1, DEEP),
/* E9 : USB_A0_OC_ODL */
PAD_CFG_NF(GPP_E9, NONE, DEEP, NF1),
/* E10 : USB_A1_OC_ODL */
PAD_CFG_NF(GPP_E10, NONE, DEEP, NF1),
/* F11 : EMMC_CMD */
PAD_CFG_NF(GPP_F11, NONE, DEEP, NF1),
/* F12 : EMMC_DATA0 */
PAD_CFG_NF(GPP_F12, NONE, DEEP, NF1),
/* F13 : EMMC_DATA1 */
PAD_CFG_NF(GPP_F13, NONE, DEEP, NF1),
/* F14 : EMMC_DATA2 */
PAD_CFG_NF(GPP_F14, NONE, DEEP, NF1),
/* F15 : EMMC_DATA3 */
PAD_CFG_NF(GPP_F15, NONE, DEEP, NF1),
/* F16 : EMMC_DATA4 */
PAD_CFG_NF(GPP_F16, NONE, DEEP, NF1),
/* F17 : EMMC_DATA5 */
PAD_CFG_NF(GPP_F17, NONE, DEEP, NF1),
/* F18 : EMMC_DATA6 */
PAD_CFG_NF(GPP_F18, NONE, DEEP, NF1),
/* F19 : EMMC_DATA7 */
PAD_CFG_NF(GPP_F19, NONE, DEEP, NF1),
/* F20 : EMMC_RCLK */
PAD_CFG_NF(GPP_F20, NONE, DEEP, NF1),
/* F21 : EMMC_CLK */
PAD_CFG_NF(GPP_F21, NONE, DEEP, NF1),
/* F22 : EMMC_RST_L */
PAD_CFG_NF(GPP_F22, NONE, DEEP, NF1),
/* H4: PCH_I2C_PCON_SDA */
PAD_CFG_NF(GPP_H4, NONE, DEEP, NF1),
/* H5: PCH_I2C_PCON_SCL */
PAD_CFG_NF(GPP_H5, NONE, DEEP, NF1),
/* H22 : PWM_PP3300_BIOZZER */
PAD_CFG_GPO(GPP_H22, 0, DEEP),
};
const struct pad_config *override_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(gpio_table);
return gpio_table;
}
/* Early pad configuration in bootblock */
static const struct pad_config early_gpio_table[] = {
/* B14 : GPP_B14_STRAP */
PAD_NC(GPP_B14, NONE),
/* B22 : GPP_B22_STRAP */
PAD_NC(GPP_B22, NONE),
/* E19 : GPP_E19_STRAP */
PAD_NC(GPP_E19, NONE),
/* E21 : GPP_E21_STRAP */
PAD_NC(GPP_E21, NONE),
/* B15 : H1_SLAVE_SPI_CS_L */
PAD_CFG_NF(GPP_B15, NONE, DEEP, NF1),
/* B16 : H1_SLAVE_SPI_CLK */
PAD_CFG_NF(GPP_B16, NONE, DEEP, NF1),
/* B17 : H1_SLAVE_SPI_MISO_R */
PAD_CFG_NF(GPP_B17, NONE, DEEP, NF1),
/* B18 : H1_SLAVE_SPI_MOSI_R */
PAD_CFG_NF(GPP_B18, NONE, DEEP, NF1),
/* C14 : BT_DISABLE_L */
PAD_CFG_GPO(GPP_C14, 0, DEEP),
/* PCH_WP_OD */
PAD_CFG_GPI(GPP_C20, NONE, DEEP),
/* C21 : H1_PCH_INT_ODL */
PAD_CFG_GPI_APIC(GPP_C21, NONE, PLTRST, LEVEL, INVERT),
/* C23 : WLAN_PE_RST# */
PAD_CFG_GPO(GPP_C23, 1, DEEP),
/* E1 : M2_SSD_PEDET */
PAD_CFG_NF(GPP_E1, NONE, DEEP, NF1),
/* E5 : SATA_DEVSLP1 */
PAD_CFG_NF(GPP_E5, NONE, PLTRST, NF1),
};
const struct pad_config *variant_early_gpio_table(size_t *num)
{
*num = ARRAY_SIZE(early_gpio_table);
return early_gpio_table;
}

View File

@ -0,0 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef VARIANT_EC_H
#define VARIANT_EC_H
#include <puff/ec.h>
#endif

View File

@ -0,0 +1,8 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef VARIANT_GPIO_H
#define VARIANT_GPIO_H
#include <baseboard/gpio.h>
#endif

View File

@ -0,0 +1,477 @@
chip soc/intel/cannonlake
# Auto-switch between X4 NVMe and X2 NVMe.
register "TetonGlacierMode" = "1"
register "SerialIoDevMode" = "{
[PchSerialIoIndexI2C0] = PchSerialIoDisabled,
[PchSerialIoIndexI2C1] = PchSerialIoDisabled,
[PchSerialIoIndexI2C2] = PchSerialIoPci,
[PchSerialIoIndexI2C3] = PchSerialIoPci,
[PchSerialIoIndexI2C4] = PchSerialIoPci,
[PchSerialIoIndexI2C5] = PchSerialIoPci,
[PchSerialIoIndexSPI0] = PchSerialIoPci,
[PchSerialIoIndexSPI1] = PchSerialIoPci,
[PchSerialIoIndexSPI2] = PchSerialIoDisabled,
[PchSerialIoIndexUART0] = PchSerialIoSkipInit,
[PchSerialIoIndexUART1] = PchSerialIoDisabled,
[PchSerialIoIndexUART2] = PchSerialIoDisabled,
}"
# USB configuration
register "usb2_ports[0]" = "{
.enable = 1,
.ocpin = OC2,
.tx_bias = USB2_BIAS_0MV,
.tx_emp_enable = USB2_PRE_EMP_ON,
.pre_emp_bias = USB2_BIAS_11P25MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
}" # Type-A Port 2
register "usb2_ports[1]" = "{
.enable = 1,
.ocpin = OC1,
.tx_bias = USB2_BIAS_0MV,
.tx_emp_enable = USB2_PRE_EMP_ON,
.pre_emp_bias = USB2_BIAS_28P15MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
}" # Type-A Port 1
register "usb2_ports[2]" = "{
.enable = 1,
.ocpin = OC3,
.tx_bias = USB2_BIAS_0MV,
.tx_emp_enable = USB2_PRE_EMP_ON,
.pre_emp_bias = USB2_BIAS_28P15MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
}" # Type-A Port 3
register "usb2_ports[3]" = "USB2_PORT_TYPE_C(OC_SKIP)" # Type-C Port
register "usb2_ports[4]" = "{
.enable = 1,
.ocpin = OC_SKIP,
.tx_bias = USB2_BIAS_0MV,
.tx_emp_enable = USB2_PRE_EMP_ON,
.pre_emp_bias = USB2_BIAS_28P15MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
}" # Type-A Port 4
register "usb2_ports[5]" = "{
.enable = 1,
.ocpin = OC0,
.tx_bias = USB2_BIAS_0MV,
.tx_emp_enable = USB2_PRE_EMP_ON,
.pre_emp_bias = USB2_BIAS_28P15MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
}" # Type-A port 0
register "usb2_ports[6]" = "USB2_PORT_EMPTY"
register "usb2_ports[7]" = "USB2_PORT_EMPTY"
register "usb2_ports[8]" = "USB2_PORT_EMPTY"
register "usb2_ports[9]" = "{
.enable = 1,
.ocpin = OC_SKIP,
.tx_bias = USB2_BIAS_0MV,
.tx_emp_enable = USB2_PRE_EMP_ON,
.pre_emp_bias = USB2_BIAS_28P15MV,
.pre_emp_bit = USB2_HALF_BIT_PRE_EMP,
}" # BT
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC2)" # Type-A Port 2
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC3)" # Type-A Port 3
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)" # Type-A Port 1
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-C
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC0)" # Type-A Port 0
register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC_SKIP)" # Type-A Port 4
# Bitmap for Wake Enable on USB attach/detach
register "usb2_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \
USB_PORT_WAKE_ENABLE(2) | \
USB_PORT_WAKE_ENABLE(3) | \
USB_PORT_WAKE_ENABLE(5) | \
USB_PORT_WAKE_ENABLE(6)"
register "usb3_wake_enable_bitmap" = "USB_PORT_WAKE_ENABLE(1) | \
USB_PORT_WAKE_ENABLE(2) | \
USB_PORT_WAKE_ENABLE(3) | \
USB_PORT_WAKE_ENABLE(5) | \
USB_PORT_WAKE_ENABLE(6)"
# Enable eMMC HS400
register "ScsEmmcHs400Enabled" = "1"
# EMMC Tx CMD Delay
# Refer to EDS-Vol2-14.3.7.
# [14:8] steps of delay for DDR mode, each 125ps, range: 0 - 39.
# [6:0] steps of delay for SDR mode, each 125ps, range: 0 - 39.
register "common_soc_config.emmc_dll.emmc_tx_cmd_cntl" = "0x505"
# EMMC TX DATA Delay 1
# Refer to EDS-Vol2-14.3.8.
# [14:8] steps of delay for HS400, each 125ps, range: 0 - 78.
# [6:0] steps of delay for SDR104/HS200, each 125ps, range: 0 - 79.
register "common_soc_config.emmc_dll.emmc_tx_data_cntl1" = "0x911"
# EMMC TX DATA Delay 2
# Refer to EDS-Vol2-14.3.9.
# [30:24] steps of delay for SDR50, each 125ps, range: 0 - 79.
# [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
# [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 -79.
# [6:0] steps of delay for SDR12, each 125ps. Range: 0 - 79.
register "common_soc_config.emmc_dll.emmc_tx_data_cntl2" = "0x1C262828"
# EMMC RX CMD/DATA Delay 1
# Refer to EDS-Vol2-14.3.10.
# [30:24] steps of delay for SDR50, each 125ps, range: 0 - 119.
# [22:16] steps of delay for DDR50, each 125ps, range: 0 - 78.
# [14:8] steps of delay for SDR25/HS50, each 125ps, range: 0 - 119.
# [6:0] steps of delay for SDR12, each 125ps, range: 0 - 119.
register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl1" = "0x1C16583b"
# EMMC RX CMD/DATA Delay 2
# Refer to EDS-Vol2-14.3.12.
# [17:16] stands for Rx Clock before Output Buffer,
# 00: Rx clock after output buffer,
# 01: Rx clock before output buffer,
# 10: Automatic selection based on working mode.
# 11: Reserved
# [14:8] steps of delay for Auto Tuning Mode, each 125ps, range: 0 - 39.
# [6:0] steps of delay for HS200, each 125ps, range: 0 - 79.
register "common_soc_config.emmc_dll.emmc_rx_cmd_data_cntl2" = "0x1001D"
# EMMC Rx Strobe Delay
# Refer to EDS-Vol2-14.3.11.
# [14:8] Rx Strobe Delay DLL 1(HS400 Mode), each 125ps, range: 0 - 39.
# [6:0] Rx Strobe Delay DLL 2(HS400 Mode), each 125ps, range: 0 - 39.
register "common_soc_config.emmc_dll.emmc_rx_strobe_cntl" = "0x1515"
# Intel HDA - disable I2S Audio SSP1 and DMIC0 as puff variant does not have them.
register "PchHdaAudioLinkSsp1" = "0"
register "PchHdaAudioLinkDmic0" = "0"
# Intel Common SoC Config
#+-------------------+---------------------------+
#| Field | Value |
#+-------------------+---------------------------+
#| GSPI0 | cr50 TPM. Early init is |
#| | required to set up a BAR |
#| | for TPM communication |
#| | before memory is up |
#| I2C0 | RFU |
#| I2C2 | PS175 |
#| I2C3 | MST |
#| I2C4 | Audio |
#+-------------------+---------------------------+
register "common_soc_config" = "{
.gspi[0] = {
.speed_mhz = 1,
.early_init = 1,
},
.i2c[0] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 0,
.fall_time_ns = 0,
},
.i2c[2] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 60,
.fall_time_ns = 60,
},
.i2c[3] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 60,
.fall_time_ns = 60,
},
.i2c[4] = {
.speed = I2C_SPEED_FAST,
.rise_time_ns = 60,
.fall_time_ns = 60,
},
}"
# PCIe port 7 for LAN
register "PcieRpEnable[6]" = "1"
register "PcieRpLtrEnable[6]" = "1"
# PCIe port 11 (x2) for NVMe hybrid storage devices
register "PcieRpEnable[10]" = "1"
register "PcieRpLtrEnable[10]" = "1"
# Uses CLK SRC 0
register "PcieClkSrcUsage[0]" = "6"
register "PcieClkSrcClkReq[0]" = "0"
# GPIO for SD card detect
register "sdcard_cd_gpio" = "vSD3_CD_B"
# SATA port 1 Gen3 Strength
# Port1 Tx De-Emphasis = 20*log(0x20/64) = -6dB
register "sata_port[1].TxGen3DeEmphEnable" = "1"
register "sata_port[1].TxGen3DeEmph" = "0x20"
device domain 0 on
device pci 04.0 on
chip drivers/intel/dptf
## Active Policy
register "policies.active[0]" = "{.target=DPTF_CPU,
.thresholds={TEMP_PCT(90, 85),
TEMP_PCT(85, 75),
TEMP_PCT(80, 65),
TEMP_PCT(75, 55),
TEMP_PCT(70, 45),}}"
register "policies.active[1]" = "{.target=DPTF_TEMP_SENSOR_0,
.thresholds={TEMP_PCT(50, 85),
TEMP_PCT(47, 75),
TEMP_PCT(45, 65),
TEMP_PCT(42, 55),
TEMP_PCT(39, 45),}}"
## Passive Policy
register "policies.passive[0]" = "DPTF_PASSIVE(CPU, CPU, 93, 5000)"
register "policies.passive[1]" = "DPTF_PASSIVE(CPU, TEMP_SENSOR_0, 65, 6000)"
## Critical Policy
register "policies.critical[0]" = "DPTF_CRITICAL(CPU, 100, SHUTDOWN)"
register "policies.critical[1]" = "DPTF_CRITICAL(TEMP_SENSOR_0, 75, SHUTDOWN)"
## Power Limits Control
# PL1 is fixed at 15W, avg over 28-32s interval
# 25-64W PL2 in 1000mW increments, avg over 28-32s interval
register "controls.power_limits.pl1" = "{
.min_power = 15000,
.max_power = 15000,
.time_window_min = 28 * MSECS_PER_SEC,
.time_window_max = 32 * MSECS_PER_SEC,
.granularity = 200,}"
register "controls.power_limits.pl2" = "{
.min_power = 25000,
.max_power = 64000,
.time_window_min = 28 * MSECS_PER_SEC,
.time_window_max = 32 * MSECS_PER_SEC,
.granularity = 1000,}"
## Charger Performance Control (Control, mA)
register "controls.charger_perf[0]" = "{ 255, 1700 }"
register "controls.charger_perf[1]" = "{ 24, 1500 }"
register "controls.charger_perf[2]" = "{ 16, 1000 }"
register "controls.charger_perf[3]" = "{ 8, 500 }"
## Fan Performance Control (Percent, Speed, Noise, Power)
register "controls.fan_perf[0]" = "{ 90, 6700, 220, 2200, }"
register "controls.fan_perf[1]" = "{ 80, 5800, 180, 1800, }"
register "controls.fan_perf[2]" = "{ 70, 5000, 145, 1450, }"
register "controls.fan_perf[3]" = "{ 60, 4900, 115, 1150, }"
register "controls.fan_perf[4]" = "{ 50, 3838, 90, 900, }"
register "controls.fan_perf[5]" = "{ 40, 2904, 55, 550, }"
register "controls.fan_perf[6]" = "{ 30, 2337, 30, 300, }"
register "controls.fan_perf[7]" = "{ 20, 1608, 15, 150, }"
register "controls.fan_perf[8]" = "{ 10, 800, 10, 100, }"
register "controls.fan_perf[9]" = "{ 0, 0, 0, 50, }"
# Fan options
register "options.fan.fine_grained_control" = "1"
register "options.fan.step_size" = "2"
device generic 0 on end
end
end # DPTF 0x1903
device pci 14.0 on
chip drivers/usb/acpi
device usb 0.0 on
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Front Left""
register "type" = "UPC_TYPE_A"
register "group" = "ACPI_PLD_GROUP(0, 0)"
device usb 2.0 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-C Port Rear""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(1, 3)"
device usb 2.1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Front Right""
register "type" = "UPC_TYPE_A"
register "group" = "ACPI_PLD_GROUP(0, 1)"
device usb 2.2 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Rear Right""
register "type" = "UPC_TYPE_A"
register "group" = "ACPI_PLD_GROUP(1, 2)"
device usb 2.3 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Rear Middle""
register "type" = "UPC_TYPE_A"
register "group" = "ACPI_PLD_GROUP(1, 1)"
device usb 2.4 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Rear Left""
register "type" = "UPC_TYPE_A"
register "group" = "ACPI_PLD_GROUP(1, 0)"
device usb 2.5 on end
end
chip drivers/usb/acpi
device usb 2.6 off end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Front Left""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(0, 0)"
device usb 3.0 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Front Right""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(0, 1)"
device usb 3.1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Rear Right""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(1, 2)"
device usb 3.2 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-C Rear""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(1, 3)"
device usb 3.3 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Rear Left""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(1, 0)"
device usb 3.4 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Rear Middle""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(1, 1)"
device usb 3.5 on end
end
end
end
end # USB xHCI
device pci 15.0 off
# RFU - Reserved for Future Use.
end # I2C #0
device pci 15.1 off end # I2C #1
device pci 15.2 on
chip drivers/i2c/generic
register "hid" = ""1AF80175""
register "name" = ""PS17""
register "desc" = ""Parade PS175""
device i2c 4a on end
end
end # I2C #2, PCON PS175.
device pci 15.3 on
chip drivers/i2c/generic
register "hid" = ""10EC2142""
register "name" = ""RTD2""
register "desc" = ""Realtek RTD2142""
device i2c 4a on end
end
end # I2C #3, Realtek RTD2142.
device pci 19.0 on
chip drivers/i2c/generic
register "hid" = ""10EC5682""
register "name" = ""RT58""
register "desc" = ""Realtek RT5682""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_H0)"
register "property_count" = "1"
# Set the jd_src to RT5668_JD1 for jack detection
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
register "property_list[0].name" = ""realtek,jd-src""
register "property_list[0].integer" = "1"
device i2c 1a on end
end
end #I2C #4
device pci 1a.0 on end # eMMC
device pci 1c.6 on
chip drivers/net
register "customized_leds" = "0x05af"
register "wake" = "GPE0_DW1_07" # GPP_C7
register "stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A18)"
register "stop_delay_ms" = "12" # NIC needs time to quiesce
register "stop_off_delay_ms" = "1"
register "has_power_resource" = "1"
register "device_index" = "0"
device pci 00.0 on end
end
end # RTL8111H Ethernet NIC
device pci 1d.2 on end # PCI Express Port 11 (X2 NVMe)
device pci 1e.3 off end # GSPI #1
end
# VR Settings Configuration for 4 Domains
#+----------------+-------+-------+-------+-------+
#| Domain/Setting | SA | IA | GTUS | GTS |
#+----------------+-------+-------+-------+-------+
#| Psi1Threshold | 20A | 20A | 20A | 20A |
#| Psi2Threshold | 5A | 5A | 5A | 5A |
#| Psi3Threshold | 1A | 1A | 1A | 1A |
#| Psi3Enable | 1 | 1 | 1 | 1 |
#| Psi4Enable | 1 | 1 | 1 | 1 |
#| ImonSlope | 0 | 0 | 0 | 0 |
#| ImonOffset | 0 | 0 | 0 | 0 |
#| VrVoltageLimit | 1.52V | 1.52V | 1.52V | 1.52V |
#| AcLoadline | 10.04 | 1.81 | 3.19 | 3.19 |
#| DcLoadline | 10.04 | 1.81 | 3.19 | 3.19 |
#+----------------+-------+-------+-------+-------+
#Note: IccMax settings are moved to SoC code
register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = 0,
.voltage_limit = 1520,
.ac_loadline = 1004,
.dc_loadline = 1004,
}"
register "domain_vr_config[VR_IA_CORE]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = 0,
.voltage_limit = 1520,
.ac_loadline = 181,
.dc_loadline = 181,
}"
register "domain_vr_config[VR_GT_UNSLICED]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = 0,
.voltage_limit = 1520,
.ac_loadline = 319,
.dc_loadline = 319,
}"
register "domain_vr_config[VR_GT_SLICED]" = "{
.vr_config_enable = 1,
.psi1threshold = VR_CFG_AMP(20),
.psi2threshold = VR_CFG_AMP(5),
.psi3threshold = VR_CFG_AMP(1),
.psi3enable = 1,
.psi4enable = 1,
.imon_slope = 0x0,
.imon_offset = 0x0,
.icc_max = 0,
.voltage_limit = 1520,
.ac_loadline = 319,
.dc_loadline = 319,
}"
end