soc/intel/common/tcss: Guard disabling MUX with TCSS_HAS_USBC_OPS

Currently, SOC_INTEL_COMMON_BLOCK_TCSS will set MUX to disabled. The two
related options to re-configure it for either USB devices or displays,
are currently only supported by the ChromeEC. As such, any device
without the ChromeEC will boot with attached USB-C devices in a
non-functional state.

Add TCSS_HAS_USBC_OPS to make this feature configurable, and set the
default to enabled if the board features the ChromeEC.

Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Ia848668ae9af4637fc7cffec9eb694f29d7deba9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79882
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
This commit is contained in:
Sean Rhodes 2024-01-10 20:38:05 +00:00 committed by Felix Held
parent 4f43b0e7ad
commit 7201602a18
2 changed files with 23 additions and 13 deletions

View File

@ -2,17 +2,28 @@ config SOC_INTEL_COMMON_BLOCK_TCSS
def_bool n
select FSPS_USE_MULTI_PHASE_INIT
help
Sets up USB2/3 port mapping in TCSS MUX and sets MUX to disconnect state
Sets up USB2/3 port mapping in TCSS MUX
config TCSS_HAS_USBC_OPS
bool "Enable USB-C MUX operations via the EC"
default y if EC_GOOGLE_CHROMEEC
depends on SOC_INTEL_COMMON_BLOCK_TCSS
help
Enable USB-C operations via the EC. Requires `usbc_get_ops` to control features
such as HPD and DP Mode entry. Currently, only the ChromeEC implements this, see
(ec/google/chromeec/usbc_mux.c).
This results in the MUX being set to a disabled state.
config ENABLE_TCSS_DISPLAY_DETECTION
bool "Enable detection of displays over USB Type-C ports with TCSS"
depends on SOC_INTEL_COMMON_BLOCK_TCSS && RUN_FSP_GOP
depends on TCSS_HAS_USBC_OPS && RUN_FSP_GOP
help
Enable displays to be detected over Type-C ports during boot.
config ENABLE_TCSS_USB_DETECTION
bool "Enable detection of USB boot devices attached to USB Type-C ports with TCSS"
depends on SOC_INTEL_COMMON_BLOCK_TCSS
depends on TCSS_HAS_USBC_OPS
help
Enable USB-C attached storage devices to be detected at boot.
This option is required for some payloads (eg, edk2), without which devices attached

View File

@ -442,23 +442,22 @@ void tcss_configure(const struct typec_aux_bias_pads aux_bias_pads[MAX_TYPE_C_PO
size_t i;
port_map = tcss_get_port_info(&num_ports);
if (port_map == NULL)
if ((port_map == NULL) || platform_is_resuming())
return;
if (!platform_is_resuming()) {
if (CONFIG(TCSS_HAS_USBC_OPS))
for (i = 0; i < num_ports; i++)
tcss_init_mux(i, &port_map[i]);
/* This should be performed before alternate modes are entered */
if (tcss_ops.configure_aux_bias_pads)
tcss_ops.configure_aux_bias_pads(aux_bias_pads);
/* This should be performed before alternate modes are entered */
if (tcss_ops.configure_aux_bias_pads)
tcss_ops.configure_aux_bias_pads(aux_bias_pads);
if (CONFIG(ENABLE_TCSS_DISPLAY_DETECTION))
tcss_configure_dp_mode(port_map, num_ports);
if (CONFIG(ENABLE_TCSS_DISPLAY_DETECTION))
tcss_configure_dp_mode(port_map, num_ports);
if (CONFIG(ENABLE_TCSS_USB_DETECTION))
tcss_configure_usb_mode(port_map, num_ports);
}
if (CONFIG(ENABLE_TCSS_USB_DETECTION))
tcss_configure_usb_mode(port_map, num_ports);
}
bool tcss_valid_tbt_auth(void)