diff --git a/src/console/console.c b/src/console/console.c index 39a30b5280..a31e293af4 100644 --- a/src/console/console.c +++ b/src/console/console.c @@ -24,6 +24,7 @@ #ifndef __PRE_RAM__ #include +#include /* * FIXME: get_option() needs to be abstracted better so that other non-volatile @@ -33,14 +34,15 @@ #if CONFIG_USE_OPTION_TABLE #include #else -static inline int get_option(void *dest, const char *name) { return -1; } +static inline enum cb_err get_option(void *dest, const char *name) + { return CB_CMOS_OTABLE_DISABLED; } #endif /* initialize the console */ void console_init(void) { struct console_driver *driver; - if(get_option(&console_loglevel, "debug_level")) + if(get_option(&console_loglevel, "debug_level") != CB_SUCCESS) console_loglevel=CONFIG_DEFAULT_CONSOLE_LOGLEVEL; for(driver = console_drivers; driver < econsole_drivers; driver++) { diff --git a/src/cpu/amd/model_fxx/model_fxx_init.c b/src/cpu/amd/model_fxx/model_fxx_init.c index 42c6f95119..4beecabfa1 100644 --- a/src/cpu/amd/model_fxx/model_fxx_init.c +++ b/src/cpu/amd/model_fxx/model_fxx_init.c @@ -245,10 +245,8 @@ static void init_ecc_memory(unsigned node_id) /* See if we scrubbing should be enabled */ enable_scrubbing = 1; - if( get_option(&enable_scrubbing, "hw_scrubber") < 0 ) - { + if (get_option(&enable_scrubbing, "hw_scrubber") != CB_SUCCESS) enable_scrubbing = CONFIG_HW_SCRUBBER; - } /* Enable cache scrubbing at the lowest possible rate */ if (enable_scrubbing) { diff --git a/src/ec/lenovo/h8/h8.c b/src/ec/lenovo/h8/h8.c index 0d1a32dce4..5f7060dcd6 100644 --- a/src/ec/lenovo/h8/h8.c +++ b/src/ec/lenovo/h8/h8.c @@ -172,14 +172,14 @@ static void h8_enable(device_t dev) h8_trackpoint_enable(conf->trackpoint_enable); h8_usb_power_enable(1); - if (!get_option(&val, "volume")) + if (get_option(&val, "volume") == CB_SUCCESS) ec_write(H8_VOLUME_CONTROL, val); - if (!get_option(&val, "bluetooth")) + if (get_option(&val, "bluetooth") == CB_SUCCESS) h8_bluetooth_enable(val); - if (!get_option(&val, "first_battery")) { + if (get_option(&val, "first_battery") == CB_SUCCESS) { tmp = ec_read(H8_CONFIG3); tmp &= ~(1 << 4); tmp |= (val & 1)<< 4; diff --git a/src/ec/lenovo/pmh7/pmh7.c b/src/ec/lenovo/pmh7/pmh7.c index 7bbe471979..b02b52aa8e 100644 --- a/src/ec/lenovo/pmh7/pmh7.c +++ b/src/ec/lenovo/pmh7/pmh7.c @@ -113,7 +113,7 @@ static void enable_dev(device_t dev) pmh7_backlight_enable(conf->backlight_enable); pmh7_dock_event_enable(conf->dock_event_enable); - if (!get_option(&val, "touchpad")) + if (get_option(&val, "touchpad") == CB_SUCCESS) pmh7_touchpad_enable(val); } diff --git a/src/lib/uart8250.c b/src/lib/uart8250.c index 261b90f2b2..aa18d2a466 100644 --- a/src/lib/uart8250.c +++ b/src/lib/uart8250.c @@ -123,9 +123,8 @@ void uart_init(void) b_index &= 7; div = divisor[b_index]; #else - if (get_option(&b_index, "baud_rate") == 0) { + if (get_option(&b_index, "baud_rate") == CB_SUCCESS) div = divisor[b_index]; - } #endif #endif diff --git a/src/lib/uart8250mem.c b/src/lib/uart8250mem.c index 8d85855f4c..1482142da0 100644 --- a/src/lib/uart8250mem.c +++ b/src/lib/uart8250mem.c @@ -118,9 +118,8 @@ u32 uart_mem_init(void) b_index &= 7; uart_baud = baud[b_index]; #else - if (get_option(&b_index, "baud_rate") == 0) { + if (get_option(&b_index, "baud_rate") == CB_SUCCESS) uart_baud = baud[b_index]; - } #endif #endif diff --git a/src/mainboard/ibase/mb899/mainboard.c b/src/mainboard/ibase/mb899/mainboard.c index ea3b010df1..373edaec19 100644 --- a/src/mainboard/ibase/mb899/mainboard.c +++ b/src/mainboard/ibase/mb899/mainboard.c @@ -117,18 +117,18 @@ static void hwm_setup(void) int cpufan_speed = 0, sysfan_speed = 0; int cpufan_temperature = 0, sysfan_temperature = 0; - if (get_option(&cpufan_control, "cpufan_cruise_control") < 0) + if (get_option(&cpufan_control, "cpufan_cruise_control") != CB_SUCCESS) cpufan_control = FAN_CRUISE_CONTROL_DISABLED; - if (get_option(&cpufan_speed, "cpufan_speed") < 0) + if (get_option(&cpufan_speed, "cpufan_speed") != CB_SUCCESS) cpufan_speed = FAN_SPEED_5625; - //if (get_option(&cpufan_temperature, "cpufan_temperature") < 0) + //if (get_option(&cpufan_temperature, "cpufan_temperature") != CB_SUCCESS) // cpufan_temperature = FAN_TEMPERATURE_30DEGC; - if (get_option(&sysfan_control, "sysfan_cruise_control") < 0) + if (get_option(&sysfan_control, "sysfan_cruise_control") != CB_SUCCESS) sysfan_control = FAN_CRUISE_CONTROL_DISABLED; - if (get_option(&sysfan_speed, "sysfan_speed") < 0) + if (get_option(&sysfan_speed, "sysfan_speed") != CB_SUCCESS) sysfan_speed = FAN_SPEED_5625; - //if (get_option(&sysfan_temperature, "sysfan_temperature") < 0) + //if (get_option(&sysfan_temperature, "sysfan_temperature") != CB_SUCCESS) // sysfan_temperature = FAN_TEMPERATURE_30DEGC; // hwm_write(0x31, 0x20); // AVCC high limit diff --git a/src/mainboard/kontron/986lcd-m/mainboard.c b/src/mainboard/kontron/986lcd-m/mainboard.c index 0bee70e1ee..f4e1a24b22 100644 --- a/src/mainboard/kontron/986lcd-m/mainboard.c +++ b/src/mainboard/kontron/986lcd-m/mainboard.c @@ -124,18 +124,18 @@ static void hwm_setup(void) int cpufan_speed = 0, sysfan_speed = 0; int cpufan_temperature = 0, sysfan_temperature = 0; - if (get_option(&cpufan_control, "cpufan_cruise_control") < 0) + if (get_option(&cpufan_control, "cpufan_cruise_control") != CB_SUCCESS) cpufan_control = FAN_CRUISE_CONTROL_DISABLED; - if (get_option(&cpufan_speed, "cpufan_speed") < 0) + if (get_option(&cpufan_speed, "cpufan_speed") != CB_SUCCESS) cpufan_speed = FAN_SPEED_5625; - //if (get_option(&cpufan_temperature, "cpufan_temperature") < 0) + //if (get_option(&cpufan_temperature, "cpufan_temperature") != CB_SUCCESS) // cpufan_temperature = FAN_TEMPERATURE_30DEGC; - if (get_option(&sysfan_control, "sysfan_cruise_control") < 0) + if (get_option(&sysfan_control, "sysfan_cruise_control") != CB_SUCCESS) sysfan_control = FAN_CRUISE_CONTROL_DISABLED; - if (get_option(&sysfan_speed, "sysfan_speed") < 0) + if (get_option(&sysfan_speed, "sysfan_speed") != CB_SUCCESS) sysfan_speed = FAN_SPEED_5625; - //if (get_option(&sysfan_temperature, "sysfan_temperature") < 0) + //if (get_option(&sysfan_temperature, "sysfan_temperature") != CB_SUCCESS) // sysfan_temperature = FAN_TEMPERATURE_30DEGC; // hwm_write(0x31, 0x20); // AVCC high limit diff --git a/src/mainboard/kontron/ktqm77/mainboard.c b/src/mainboard/kontron/ktqm77/mainboard.c index 3829d72669..30f0468ef3 100644 --- a/src/mainboard/kontron/ktqm77/mainboard.c +++ b/src/mainboard/kontron/ktqm77/mainboard.c @@ -163,7 +163,7 @@ static void mainboard_enable(device_t dev) verb_setup(); unsigned disable = 0; - if ((get_option(&disable, "ethernet1") == 0) && disable) { + if ((get_option(&disable, "ethernet1") == CB_SUCCESS) && disable) { device_t nic = dev_find_slot(0, PCI_DEVFN(0x1c, 2)); if (nic) { printk(BIOS_DEBUG, "DISABLE FIRST NIC!\n"); @@ -171,7 +171,7 @@ static void mainboard_enable(device_t dev) } } disable = 0; - if ((get_option(&disable, "ethernet2") == 0) && disable) { + if ((get_option(&disable, "ethernet2") == CB_SUCCESS) && disable) { device_t nic = dev_find_slot(0, PCI_DEVFN(0x1c, 3)); if (nic) { printk(BIOS_DEBUG, "DISABLE SECOND NIC!\n"); diff --git a/src/mainboard/lenovo/t60/mainboard.c b/src/mainboard/lenovo/t60/mainboard.c index 2e54c7bc1c..52f5dcf1e2 100644 --- a/src/mainboard/lenovo/t60/mainboard.c +++ b/src/mainboard/lenovo/t60/mainboard.c @@ -78,7 +78,7 @@ static void mainboard_enable(device_t dev) ec_write(0x0c, 0x08); ec_write(0x0c, inb(0x164c) & 8 ? 0x89 : 0x09); - if (get_option(&defaults_loaded, "cmos_defaults_loaded") < 0) { + if (get_option(&defaults_loaded, "cmos_defaults_loaded") != CB_SUCCESS) { printk(BIOS_INFO, "failed to get cmos_defaults_loaded"); defaults_loaded = 0; } diff --git a/src/mainboard/siemens/sitemp_g1p1/mainboard.c b/src/mainboard/siemens/sitemp_g1p1/mainboard.c index 4fc685567f..89309f2335 100644 --- a/src/mainboard/siemens/sitemp_g1p1/mainboard.c +++ b/src/mainboard/siemens/sitemp_g1p1/mainboard.c @@ -448,11 +448,11 @@ static void set_thermal_config(void) cpu_fan_control = cpu_fan_control_defaults; case_fan_control = case_fan_control_defaults; - if( get_option(&byte, "cpu_fan_control") == -4 ) { + if (get_option(&byte, "cpu_fan_control") == CB_CMOS_CHECKSUM_INVALID) { printk(BIOS_WARNING, "%s: CMOS checksum invalid, keeping default values\n",__func__); } else { // get all the options needed - if( get_option(&byte, "cpu_fan_control") == 0 ) + if( get_option(&byte, "cpu_fan_control") == CB_SUCCESS ) cpu_fan_control.enable = byte ? 1 : 0; get_option(&cpu_fan_control.polarity, "cpu_fan_polarity"); @@ -461,7 +461,7 @@ static void set_thermal_config(void) get_option(&cpu_fan_control.pwm_min, "cpu_dutycycle_min"); get_option(&cpu_fan_control.pwm_max, "cpu_dutycycle_max"); - if( get_option(&byte, "chassis_fan_control") == 0) + if( get_option(&byte, "chassis_fan_control") == CB_SUCCESS) case_fan_control.enable = byte ? 1 : 0; get_option(&case_fan_control.polarity, "chassis_fan_polarity"); get_option(&case_fan_control.t_min, "chassis_t_min"); @@ -816,7 +816,7 @@ static void mainboard_init(device_t dev) dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__); #if CONFIG_PCI_OPTION_ROM_RUN_REALMODE - if( get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") < 0 ) + if (get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") != CB_SUCCESS) int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO; int15_func.regs.func05_TV_standard = TV_MODE_NO; install_INT15_function_extensions(&int15_func); diff --git a/src/northbridge/amd/amdk8/misc_control.c b/src/northbridge/amd/amdk8/misc_control.c index 030c9928c5..cab56c2f4e 100644 --- a/src/northbridge/amd/amdk8/misc_control.c +++ b/src/northbridge/amd/amdk8/misc_control.c @@ -48,10 +48,8 @@ static void mcf3_read_resources(device_t dev) } iommu = 1; - if( get_option(&iommu, "iommu") < 0 ) - { + if (get_option(&iommu, "iommu") != CB_SUCCESS) iommu = CONFIG_IOMMU; - } if (iommu) { /* Add a GART aperture resource */ diff --git a/src/northbridge/intel/i945/gma.c b/src/northbridge/intel/i945/gma.c index deda2fa128..433152c26d 100644 --- a/src/northbridge/intel/i945/gma.c +++ b/src/northbridge/intel/i945/gma.c @@ -94,7 +94,7 @@ static void gma_func1_init(struct device *dev) pci_write_config32(dev, PCI_COMMAND, reg32 | PCI_COMMAND_MASTER | PCI_COMMAND_IO); - if (!get_option(&val, "tft_brightness")) + if (get_option(&val, "tft_brightness") == CB_SUCCESS) pci_write_config8(dev, 0xf4, val); else pci_write_config8(dev, 0xf4, 0xff); diff --git a/src/southbridge/amd/sb600/sata.c b/src/southbridge/amd/sb600/sata.c index 8664483ad2..a17aab8df7 100644 --- a/src/southbridge/amd/sb600/sata.c +++ b/src/southbridge/amd/sb600/sata.c @@ -119,7 +119,7 @@ static void sata_init(struct device *dev) pci_write_config8(dev, 0x40, byte); // 1 means IDE, 0 means AHCI - if( get_option(&i, "sata_mode") < 0 ) { + if (get_option(&i, "sata_mode") != CB_SUCCESS) { // no cmos option i = CONFIG_SATA_MODE; } diff --git a/src/southbridge/intel/i82801dx/lpc.c b/src/southbridge/intel/i82801dx/lpc.c index cf4e132e3b..de09b165d6 100644 --- a/src/southbridge/intel/i82801dx/lpc.c +++ b/src/southbridge/intel/i82801dx/lpc.c @@ -116,7 +116,7 @@ static void i82801dx_power_options(device_t dev) * * If the option is not existent (Laptops), use MAINBOARD_POWER_ON. */ - if (get_option(&pwr_on, "power_on_after_fail") < 0) + if (get_option(&pwr_on, "power_on_after_fail") != CB_SUCCESS) pwr_on = MAINBOARD_POWER_ON; reg8 = pci_read_config8(dev, GEN_PMCON_3); diff --git a/src/southbridge/intel/i82801gx/lpc.c b/src/southbridge/intel/i82801gx/lpc.c index 9285080f19..b9caac6eaa 100644 --- a/src/southbridge/intel/i82801gx/lpc.c +++ b/src/southbridge/intel/i82801gx/lpc.c @@ -175,7 +175,7 @@ static void i82801gx_power_options(device_t dev) * * If the option is not existent (Laptops), use MAINBOARD_POWER_ON. */ - if (get_option(&pwr_on, "power_on_after_fail") < 0) + if (get_option(&pwr_on, "power_on_after_fail") != CB_SUCCESS) pwr_on = MAINBOARD_POWER_ON; reg8 = pci_read_config8(dev, GEN_PMCON_3); diff --git a/src/southbridge/intel/i82801ix/lpc.c b/src/southbridge/intel/i82801ix/lpc.c index bea0d98847..61a11b30db 100644 --- a/src/southbridge/intel/i82801ix/lpc.c +++ b/src/southbridge/intel/i82801ix/lpc.c @@ -181,7 +181,7 @@ static void i82801ix_power_options(device_t dev) * * If the option is not existent (Laptops), use MAINBOARD_POWER_ON. */ - if (get_option(&pwr_on, "power_on_after_fail") < 0) + if (get_option(&pwr_on, "power_on_after_fail") != CB_SUCCESS) pwr_on = MAINBOARD_POWER_ON; reg8 = pci_read_config8(dev, D31F0_GEN_PMCON_3); diff --git a/src/southbridge/via/vt8237r/lpc.c b/src/southbridge/via/vt8237r/lpc.c index 01d2a9c690..d8251a08fa 100644 --- a/src/southbridge/via/vt8237r/lpc.c +++ b/src/southbridge/via/vt8237r/lpc.c @@ -543,7 +543,7 @@ static void vt8237_common_init(struct device *dev) } /* configure power state of the board after loss of power */ - if (get_option(&pwr_on, "power_on_after_fail") < 0) + if (get_option(&pwr_on, "power_on_after_fail") != CB_SUCCESS) pwr_on = 1; enables = pci_read_config8(dev, 0x58); pci_write_config8(dev, 0x58, enables & ~0x02);