First part of heterogenous dualchannel support.

Do not allow non-identical DIMMs yet, but prepare the code.

Calculate tCL related settings per DIMM in a dual channel setup. The
check for compatibility will come in a later patch, but since DIMMs
still have to be identical, this does not hurt.

Factor out tRC calculation to prepare for per-DIMM calculation.

Add diagnostic messages to tRC code.

Test booted to FILO, behaviour is identical if you ignore the added
debug messages (which are switched off by default).

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
Acked-by: Peter Stuge <peter@stuge.se>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3867 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Carl-Daniel Hailfinger 2009-01-16 03:44:41 +00:00
parent 1d72e10bb4
commit 734d09e05b
1 changed files with 59 additions and 31 deletions

View File

@ -1823,19 +1823,15 @@ static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller *
* by both the memory controller and the dimms.
*/
for (i = 0; i < DIMM_SOCKETS; i++) {
u32 spd_device = ctrl->channel0[i];
u32 spd_device;
printk_raminit("1.1 dimm_mask: %08x\n", meminfo->dimm_mask);
if (!(meminfo->dimm_mask & (1 << i))) {
if (meminfo->dimm_mask & (1 << (DIMM_SOCKETS + i))) { /* channelB only? */
spd_device = ctrl->channel1[i];
} else {
continue;
}
}
printk_raminit("i: %08x\n",i);
if (meminfo->dimm_mask & (1 << i)) {
spd_device = ctrl->channel0[i];
printk_raminit("Channel 0 settings:\n");
switch (find_optimum_spd_latency(spd_device, &min_latency, &min_cycle_time)) {
case -1:
goto hw_error;
@ -1844,6 +1840,20 @@ static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller *
continue;
}
}
if (meminfo->dimm_mask & (1 << (DIMM_SOCKETS + i))) {
spd_device = ctrl->channel1[i];
printk_raminit("Channel 1 settings:\n");
switch (find_optimum_spd_latency(spd_device, &min_latency, &min_cycle_time)) {
case -1:
goto hw_error;
break;
case 1:
continue;
}
}
}
/* Make a second pass through the dimms and disable
* any that cannot support the selected memclk and cas latency.
*/
@ -1941,37 +1951,55 @@ static unsigned convert_to_1_4(unsigned value)
valuex = fraction [value & 0x7];
return valuex;
}
int get_dimm_Trc_clocks(u32 spd_device, const struct mem_param *param)
{
int value;
int value2;
int clocks;
value = spd_read_byte(spd_device, SPD_TRC);
if (value < 0)
return -1;
printk_raminit("update_dimm_Trc: tRC (41) = %08x\n", value);
value2 = spd_read_byte(spd_device, SPD_TRC -1);
value <<= 2;
value += convert_to_1_4(value2>>4);
value *= 10;
printk_raminit("update_dimm_Trc: tRC final value = %i\n", value);
clocks = (value + param->divisor - 1)/param->divisor;
printk_raminit("update_dimm_Trc: clocks = %i\n", clocks);
if (clocks < DTL_TRC_MIN) {
#warning We should die here or at least disable this bank.
printk_notice("update_dimm_Trc: can't refresh fast enough, "
"want %i clocks, can %i clocks\n", clocks, DTL_TRC_MIN);
clocks = DTL_TRC_MIN;
}
return clocks;
}
static int update_dimm_Trc(const struct mem_controller *ctrl,
const struct mem_param *param,
int i, long dimm_mask)
{
unsigned clocks, old_clocks;
int clocks, old_clocks;
uint32_t dtl;
int value;
int value2;
u32 spd_device = ctrl->channel0[i];
if (!(dimm_mask & (1 << i)) && (dimm_mask & (1 << (DIMM_SOCKETS + i)))) { /* channelB only? */
spd_device = ctrl->channel1[i];
}
value = spd_read_byte(spd_device, SPD_TRC);
if (value < 0) return -1;
value2 = spd_read_byte(spd_device, SPD_TRC -1);
value <<= 2;
value += convert_to_1_4(value2>>4);
value *=10;
clocks = (value + param->divisor - 1)/param->divisor;
if (clocks < DTL_TRC_MIN) {
clocks = DTL_TRC_MIN;
}
clocks = get_dimm_Trc_clocks(spd_device, param);
if (clocks == -1)
return clocks;
if (clocks > DTL_TRC_MAX) {
return 0;
}
printk_raminit("update_dimm_Trc: clocks after adjustment = %i\n", clocks);
dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
old_clocks = ((dtl >> DTL_TRC_SHIFT) & DTL_TRC_MASK) + DTL_TRC_BASE;