GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

First batch of indent-aided code cleanups, more will follow. 

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@4318 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Uwe Hermann 2009-05-27 18:55:19 +00:00
parent 5c044c732f
commit 7365004424
27 changed files with 723 additions and 782 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
src/northbridge/via/vx800/chip.h
View File

@ -17,8 +17,7 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
struct northbridge_via_vx800_config
{
struct northbridge_via_vx800_config {
};
extern struct chip_operations northbridge_via_vx800_ops;

217
src/northbridge/via/vx800/clk_ctrl.c
View File

@ -17,11 +17,9 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
void DutyCycleCtrl(DRAM_SYS_ATTR * DramAttr)
void DutyCycleCtrl(DRAM_SYS_ATTR *DramAttr)
{
u8 Data;
u8 FreqId;
u8 i;
u8 Data, FreqId, i;
if (DIMMFREQ_800 == DramAttr->DramFreq)
FreqId = 2;
@ -34,64 +32,54 @@ void DutyCycleCtrl(DRAM_SYS_ATTR * DramAttr)
else
FreqId = 5;
if (DramAttr->RankNumChA > 0) { // 1 rank
if (DramAttr->RankNumChA > 0) { /* 1 rank */
for (i = 0; i < DUTY_CYCLE_REG_NUM; i++) {
Data =
pci_read_config8(MEMCTRL,
ChA_Duty_Control_DDR2[i][0]);
Data &= ChA_Duty_Control_DDR2[i][1]; /*Mask */
Data |= ChA_Duty_Control_DDR2[i][FreqId]; /*set Value */
Data = pci_read_config8(MEMCTRL,
ChA_Duty_Control_DDR2[i][0]);
Data &= ChA_Duty_Control_DDR2[i][1]; /* mask */
Data |= ChA_Duty_Control_DDR2[i][FreqId]; /* set val */
pci_write_config8(MEMCTRL,
ChA_Duty_Control_DDR2[i][0],
Data);
}
}
if (1 == ENABLE_CHC) { // 1 rank
for (i = 0; i < DUTY_CYCLE_REG_NUM; i++) {
Data =
pci_read_config8(MEMCTRL,
ChB_Duty_Control_DDR2[i][0]);
Data &= ChB_Duty_Control_DDR2[i][1]; /*Mask */
Data |= ChB_Duty_Control_DDR2[i][FreqId]; /*set Value */
pci_write_config8(MEMCTRL,
ChB_Duty_Control_DDR2[i][0],
Data);
ChA_Duty_Control_DDR2[i][0], Data);
}
}
if (1 == ENABLE_CHC) { /* 1 rank */
for (i = 0; i < DUTY_CYCLE_REG_NUM; i++) {
Data = pci_read_config8(MEMCTRL,
ChB_Duty_Control_DDR2[i][0]);
Data &= ChB_Duty_Control_DDR2[i][1]; /* mask */
Data |= ChB_Duty_Control_DDR2[i][FreqId]; /* set val */
pci_write_config8(MEMCTRL,
ChB_Duty_Control_DDR2[i][0], Data);
}
}
}
/*
DRAM clock phase and delay control
*/
//sub routine list
void ClkPhsCtrlFBMDDR2(DRAM_SYS_ATTR * DramAttr);
* DRAM clock phase and delay control
*/
void WrtDataPhsCtrl(DRAM_SYS_ATTR * DramAttr);
/* Subroutine list */
void ClkPhsCtrlFBMDDR2(DRAM_SYS_ATTR *DramAttr);
void WrtDataPhsCtrl(DRAM_SYS_ATTR *DramAttr);
void DQDQSOutputDlyCtrl(DRAM_SYS_ATTR *DramAttr);
void DQSInputCaptureCtrl(DRAM_SYS_ATTR *DramAttr);
void DCLKPhsCtrl(DRAM_SYS_ATTR *DramAttr);
void DQDQSOutputDlyCtrl(DRAM_SYS_ATTR * DramAttr);
void DQSInputCaptureCtrl(DRAM_SYS_ATTR * DramAttr);
void DCLKPhsCtrl(DRAM_SYS_ATTR * DramAttr);
void DRAMClkCtrl(DRAM_SYS_ATTR * DramAttr)
void DRAMClkCtrl(DRAM_SYS_ATTR *DramAttr)
{
/*write data clock phase control */
/* Write data clock phase control. */
WrtDataPhsCtrl(DramAttr);
/*clock phase control */
/* Clock phase control */
ClkPhsCtrlFBMDDR2(DramAttr);
/**/ DQDQSOutputDlyCtrl(DramAttr);
/**/ DQSInputCaptureCtrl(DramAttr);
DCLKPhsCtrl(DramAttr);
}
void ClkPhsCtrlFBMDDR2(DRAM_SYS_ATTR * DramAttr)
void ClkPhsCtrlFBMDDR2(DRAM_SYS_ATTR *DramAttr)
{
u8 Data;
u8 FreqId, i;
u8 Data, FreqId, i;
if (DramAttr->DramFreq == DIMMFREQ_800)
FreqId = 2;
@ -103,54 +91,45 @@ void ClkPhsCtrlFBMDDR2(DRAM_SYS_ATTR * DramAttr)
FreqId = 5;
else
FreqId = 5;
/*channel A */// 2~4 Rank
if (DramAttr->RankNumChA == 1) { // 1 rank
/* Channel A */
// 2~4 Rank
if (DramAttr->RankNumChA == 1) { /* 1 rank */
for (i = 0; i < 3; i++) {
Data =
pci_read_config8(MEMCTRL,
DDR2_ChA_Clk_Phase_Table_1R[i]
[0]);
Data &= DDR2_ChA_Clk_Phase_Table_1R[i][1]; /*Mask */
Data |= DDR2_ChA_Clk_Phase_Table_1R[i][FreqId]; /*set Value */
Data = pci_read_config8(MEMCTRL,
DDR2_ChA_Clk_Phase_Table_1R[i][0]);
Data &= DDR2_ChA_Clk_Phase_Table_1R[i][1]; /* mask */
Data |= DDR2_ChA_Clk_Phase_Table_1R[i][FreqId]; /* set val */
pci_write_config8(MEMCTRL,
DDR2_ChA_Clk_Phase_Table_1R[i]
[0], Data);
DDR2_ChA_Clk_Phase_Table_1R[i][0], Data);
}
} else if (DramAttr->RankNumChA > 1) { // 2~4 Rank
} else if (DramAttr->RankNumChA > 1) { /* 2~4 Rank */
for (i = 0; i < 3; i++) {
Data =
pci_read_config8(MEMCTRL,
DDR2_ChA_Clk_Phase_Table_2R[i]
[0]);
Data &= DDR2_ChA_Clk_Phase_Table_2R[i][1]; /*Mask */
Data |= DDR2_ChA_Clk_Phase_Table_2R[i][FreqId]; /*set Value */
Data = pci_read_config8(MEMCTRL,
DDR2_ChA_Clk_Phase_Table_2R[i][0]);
Data &= DDR2_ChA_Clk_Phase_Table_2R[i][1]; /* mask */
Data |= DDR2_ChA_Clk_Phase_Table_2R[i][FreqId]; /* set val */
pci_write_config8(MEMCTRL,
DDR2_ChA_Clk_Phase_Table_2R[i]
[0], Data);
DDR2_ChA_Clk_Phase_Table_2R[i][0], Data);
}
}
#if ENABLE_CHB
if (DramAttr->RankNumChB > 0) { // 1 rank
if (DramAttr->RankNumChB > 0) { /* 1 rank */
for (i = 0; i < 3; i++) {
Data =
pci_read_config8(MEMCTRL,
DDR2_ChB_Clk_Phase_Table_1R[i]
[0]);
Data &= DDR2_ChB_Clk_Phase_Table_1R[i][1]; /*Mask */
Data |= DDR2_ChB_Clk_Phase_Table_1R[i][FreqId]; /*set Value */
Data = pci_read_config8(MEMCTRL,
DDR2_ChB_Clk_Phase_Table_1R[i][0]);
Data &= DDR2_ChB_Clk_Phase_Table_1R[i][1]; /* mask */
Data |= DDR2_ChB_Clk_Phase_Table_1R[i][FreqId]; /* set val */
pci_write_config8(MEMCTRL,
DDR2_ChB_Clk_Phase_Table_1R[i]
[0], Data);
DDR2_ChB_Clk_Phase_Table_1R[i][0], Data);
}
}
#endif
}
void WrtDataPhsCtrl(DRAM_SYS_ATTR * DramAttr)
void WrtDataPhsCtrl(DRAM_SYS_ATTR *DramAttr)
{
u8 Data;
u8 FreqId, i;
u8 Data, FreqId, i;
if (DIMMFREQ_800 == DramAttr->DramFreq)
FreqId = 2;
@ -163,31 +142,25 @@ void WrtDataPhsCtrl(DRAM_SYS_ATTR * DramAttr)
else
FreqId = 5;
if (DramAttr->RankNumChA > 0) { // 1 rank
if (DramAttr->RankNumChA > 0) { /* 1 rank */
for (i = 0; i < WrtData_REG_NUM; i++) {
Data =
pci_read_config8(MEMCTRL,
DDR2_ChA_WrtData_Phase_Table
[i][0]);
Data &= DDR2_ChA_WrtData_Phase_Table[i][1]; /*Mask */
Data |= DDR2_ChA_WrtData_Phase_Table[i][FreqId]; /*set Value */
Data = pci_read_config8(MEMCTRL,
DDR2_ChA_WrtData_Phase_Table[i][0]);
Data &= DDR2_ChA_WrtData_Phase_Table[i][1]; /* mask */
Data |= DDR2_ChA_WrtData_Phase_Table[i][FreqId]; /* set val */
pci_write_config8(MEMCTRL,
DDR2_ChA_WrtData_Phase_Table[i]
[0], Data);
DDR2_ChA_WrtData_Phase_Table[i][0], Data);
}
}
#if ENABLE_CHB
if (DramAttr->RankNumChB > 0) { // 1 rank
if (DramAttr->RankNumChB > 0) { /* 1 rank */
for (i = 0; i < WrtData_REG_NUM; i++) {
Data =
pci_read_config8(MEMCTRL,
DDR2_ChB_WrtData_Phase_Table
[i][0]);
Data &= DDR2_ChB_WrtData_Phase_Table[i][1]; /*Mask */
Data |= DDR2_ChB_WrtData_Phase_Table[i][FreqId]; /*set Value */
Data = pci_read_config8(MEMCTRL,
DDR2_ChB_WrtData_Phase_Table[i][0]);
Data &= DDR2_ChB_WrtData_Phase_Table[i][1]; /* mask */
Data |= DDR2_ChB_WrtData_Phase_Table[i][FreqId]; /* set val */
pci_write_config8(MEMCTRL,
DDR2_ChB_WrtData_Phase_Table[i]
[0], Data);
DDR2_ChB_WrtData_Phase_Table[i][0], Data);
}
}
#endif
@ -197,10 +170,9 @@ void WrtDataPhsCtrl(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x8C, Data);
}
void DQDQSOutputDlyCtrl(DRAM_SYS_ATTR * DramAttr)
void DQDQSOutputDlyCtrl(DRAM_SYS_ATTR *DramAttr)
{
u8 Data;
u8 FreqId;
u8 Data, FreqId;
if (DIMMFREQ_400 == DramAttr->DramFreq)
FreqId = 0;
@ -212,6 +184,7 @@ void DQDQSOutputDlyCtrl(DRAM_SYS_ATTR * DramAttr)
FreqId = 2;
else
FreqId = 0;
if (DramAttr->RankNumChA > 0) {
Data = DDR2_CHA_DQ_DQS_Delay_Table[FreqId][0];
pci_write_config8(MEMCTRL, 0xf0, Data);
@ -242,10 +215,9 @@ void DQDQSOutputDlyCtrl(DRAM_SYS_ATTR * DramAttr)
#endif
}
void DQSInputCaptureCtrl(DRAM_SYS_ATTR * DramAttr)
void DQSInputCaptureCtrl(DRAM_SYS_ATTR *DramAttr)
{
u8 Data;
u8 FreqId, i;
u8 Data, FreqId, i;
if (DIMMFREQ_800 == DramAttr->DramFreq)
FreqId = 2;
@ -261,52 +233,49 @@ void DQSInputCaptureCtrl(DRAM_SYS_ATTR * DramAttr)
Data = 0x8A;
pci_write_config8(MEMCTRL, 0x77, Data);
if (DramAttr->RankNumChA > 0) { // 1 rank
if (DramAttr->RankNumChA > 0) { /* 1 rank */
for (i = 0; i < DQS_INPUT_CAPTURE_REG_NUM; i++) {
Data =
pci_read_config8(MEMCTRL,
DDR2_ChA_DQS_Input_Capture_Tbl
[i][0]);
Data &= DDR2_ChA_DQS_Input_Capture_Tbl[i][1]; /*Mask */
Data |= DDR2_ChA_DQS_Input_Capture_Tbl[i][FreqId]; /*set Value */
Data = pci_read_config8(MEMCTRL,
DDR2_ChA_DQS_Input_Capture_Tbl[i][0]);
Data &= DDR2_ChA_DQS_Input_Capture_Tbl[i][1]; /* mask */
Data |= DDR2_ChA_DQS_Input_Capture_Tbl[i][FreqId]; /* set val */
pci_write_config8(MEMCTRL,
DDR2_ChA_DQS_Input_Capture_Tbl[i]
[0], Data);
DDR2_ChA_DQS_Input_Capture_Tbl[i][0], Data);
}
}
#if ENABLE_CHB
if (DramAttr->RankNumChB > 0) { // 1 rank
if (DramAttr->RankNumChB > 0) { /* 1 rank */
for (i = 0; i < DQS_INPUT_CAPTURE_REG_NUM; i++) {
Data =
pci_read_config8(MEMCTRL,
DDR2_ChB_DQS_Input_Capture_Tbl
[i][0]);
Data &= DDR2_ChB_DQS_Input_Capture_Tbl[i][1]; /*Mask */
Data |= DDR2_ChB_DQS_Input_Capture_Tbl[i][FreqId]; /*set Value */
Data = pci_read_config8(MEMCTRL,
DDR2_ChB_DQS_Input_Capture_Tbl[i][0]);
Data &= DDR2_ChB_DQS_Input_Capture_Tbl[i][1]; /* mask */
Data |= DDR2_ChB_DQS_Input_Capture_Tbl[i][FreqId]; /* set val */
pci_write_config8(MEMCTRL,
DDR2_ChB_DQS_Input_Capture_Tbl[i]
[0], Data);
DDR2_ChB_DQS_Input_Capture_Tbl[i][0], Data);
}
}
#endif
}
//This is very important, if you don't set it correctly, dram will be unreliable
//set DCLK Phase control(Reg99H[6:1]) according the DDRII in the dimm
void DCLKPhsCtrl(DRAM_SYS_ATTR * DramAttr)
/*
* This is very important, if you don't set it correctly, DRAM will be
* unreliable,
*
* Set DCLK Phase control(Reg99H[6:1]) according the DDRII in the DIMM.
*/
void DCLKPhsCtrl(DRAM_SYS_ATTR *DramAttr)
{
u8 Data;
Data = 0;
Data = 0; /* TODO: Can be dropped? */
Data = pci_read_config8(MEMCTRL, 0x99);
Data &= 0xE1;
//DDR in Dimm1, MCLKOA[4,3,0] will output MCLK
/* DDR in Dimm1, MCLKOA[4,3,0] will output MCLK */
if (DramAttr->RankPresentMap & 0x03)
Data |= 0x09 << 1;
//DDR in Dimm2, MCLKOA[5,2,1] will output MCLK
/* DDR in Dimm2, MCLKOA[5,2,1] will output MCLK */
if (DramAttr->RankPresentMap & 0x0C)
Data |= 0x06 << 1;
pci_write_config8(MEMCTRL, 0x99, Data);
}

161
src/northbridge/via/vx800/detection.c
View File

@ -17,25 +17,20 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#define SMBUS_ADDR_CH_A_1 0xA0 // Dimmx
#define SMBUS_ADDR_CH_A_2 0xA2 // Dimmx
#define SMBUS_ADDR_CH_B_1 0xA4 // Dimmx
#define SMBUS_ADDR_CH_B_2 0xA6 // Dimmx
#define SMBUS_ADDR_CH_A_1 0xA0 /* Dimmx */
#define SMBUS_ADDR_CH_A_2 0xA2 /* Dimmx */
#define SMBUS_ADDR_CH_B_1 0xA4 /* Dimmx */
#define SMBUS_ADDR_CH_B_2 0xA6 /* Dimmx */
/*read data*/
CB_STATUS GetSPDData(u8 Slot, u8 Length, u8 * Buf);
/* read data */
CB_STATUS GetSPDData(u8 Slot, u8 Length, u8 *Buf);
void DRAMCmdRate(DRAM_SYS_ATTR *DramAttr);
CB_STATUS GetInfoFromSPD(DRAM_SYS_ATTR *DramAttr);
void DRAMCmdRate(DRAM_SYS_ATTR * DramAttr);
CB_STATUS GetInfoFromSPD(DRAM_SYS_ATTR * DramAttr);
CB_STATUS GetSPDData(u8 Slot, u8 Length, u8 * Buf)
CB_STATUS GetSPDData(u8 Slot, u8 Length, u8 *Buf)
{
// CB_STATUS Status = CB_NOT_READY;
u8 Val;
u8 i;
u8 Val, i;
if (1 > Length || NULL == Buf)
return CB_INVALID_PARAMETER;
@ -47,37 +42,42 @@ CB_STATUS GetSPDData(u8 Slot, u8 Length, u8 * Buf)
return CB_SUCCESS;
}
CB_STATUS DRAMDetect(DRAM_SYS_ATTR * DramAttr)
CB_STATUS DRAMDetect(DRAM_SYS_ATTR *DramAttr)
{
CB_STATUS Status = CB_SUCCESS;
PRINT_DEBUG_MEM("Dram Detection \r");
PRINT_DEBUG_MEM("DRAM detection \r");
/*Read D0F3Rx6C , detect memory type DDR1 or DDR2 */
// 353 supports DDR2 only
/* Read D0F3Rx6C, detect memory type DDR1 or DDR2. */
/* 353 supports DDR2 only */
DramAttr->DramType = RAMTYPE_SDRAMDDR2;
/*get information for SPD */
/* Get information for SPD. */
Status = GetInfoFromSPD(DramAttr);
if (CB_SUCCESS == Status) {
/*64bit or 128Bit */
//
// if (RAMTYPE_SDRAMDDR == DramAttr->DramType)
/* 64bit or 128Bit */
/*select command rate */
// if (RAMTYPE_SDRAMDDR == DramAttr->DramType)
/* Select command rate. */
DRAMCmdRate(DramAttr);
}
return Status;
}
// Determine 1T or 2T Command Rate:
// To enable 1T command Rate, the system will satisfy the following 3 conditions:
// 1. Each DRAM channel may have 1 or 2 ranks of DIMM. 3/4 ranks can not support 1T command rate
// It's for loading issue. 1T can supports (a). only one socket with two ranks OR
// (b). two sockets each with 1 rank.
// 2. User wishes to enable 1T command rate mode and turn on by Setup menu
// 3. If 1T command rate can be enabled, just set EBP bit here.
void DRAMCmdRate(DRAM_SYS_ATTR * DramAttr)
/*
* Determine 1T or 2T command rate.
*
* To enable 1T command rate, the system will satisfy the following
* three conditions:
*
* 1. Each DRAM channel may have 1 or 2 ranks of DIMM. 3/4 ranks can not
* support 1T command rate. It's for loading issue. 1T can supports
* (a) only one socket with two ranks, OR
* (b) two sockets each with 1 rank.
* 2. User wishes to enable 1T command rate mode and turn on by setup menu.
* 3. If 1T command rate can be enabled, just set EBP bit here.
*/
void DRAMCmdRate(DRAM_SYS_ATTR *DramAttr)
{
u8 Data;
@ -89,23 +89,22 @@ void DRAMCmdRate(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x50, Data);
}
/*get SPD data and set RANK presence map*/
/*
Sockets0,1 is Channel A / Sockets2,3 is Channel B
socket0 SPD device address 0x50 / socket1 SPD device address 0x51
socket2 SPD device address 0x52 / socket3 SPD device address 0x53
*/
CB_STATUS GetInfoFromSPD(DRAM_SYS_ATTR * DramAttr)
* Get SPD data and set RANK presence map.
*
* Sockets0,1 is Channel A / Sockets2,3 is Channel B.
*
* Socket0 SPD device address 0x50 / socket1 SPD device address 0x51
* Socket2 SPD device address 0x52 / socket3 SPD device address 0x53
*/
CB_STATUS GetInfoFromSPD(DRAM_SYS_ATTR *DramAttr)
{
CB_STATUS Status;
u8 *pSPDDataBuf;
u8 ModuleDataWidth;
u8 ChipWidth;
u8 RankNum;
u8 LoadNum;
u8 Sockets, i;
BOOLEAN bFind;
bFind = FALSE;
u8 ModuleDataWidth, ChipWidth, RankNum, LoadNum, Sockets, i;
BOOLEAN bFind; /* FIXME: We don't have/want BOOLEAN. */
bFind = FALSE; /* FIXME: We don't have/want FALSE. */
Status = CB_DEVICE_ERROR;
for (Sockets = 0; Sockets < MAX_SOCKETS; Sockets++) {
@ -116,8 +115,7 @@ CB_STATUS GetInfoFromSPD(DRAM_SYS_ATTR * DramAttr)
Status = CB_NOT_READY;
} else {
Status =
GetSPDData(Sockets, SPD_DATA_SIZE,
pSPDDataBuf);
GetSPDData(Sockets, SPD_DATA_SIZE, pSPDDataBuf);
PRINT_DEBUG_MEM("SPD : \r");
for (i = 0; i < SPD_DATA_SIZE; i++) {
PRINT_DEBUG_MEM(" ");
@ -125,49 +123,58 @@ CB_STATUS GetInfoFromSPD(DRAM_SYS_ATTR * DramAttr)
}
}
if (CB_SUCCESS == Status) {
/*if Dram Controller detected type not same as the type got from SPD, There are ERROR */
if (pSPDDataBuf[SPD_MEMORY_TYPE] !=
DramAttr->DramType) {
Status = CB_DEVICE_ERROR; /*Memory int error */
PRINT_DEBUG_MEM
("Memory Device ERROR: Dram Controller detected type != type got from SPD \r");
/*
* If DRAM controller detected type not same as the
* type got from SPD, there are ERROR.
*/
if (pSPDDataBuf[SPD_MEMORY_TYPE] != DramAttr->DramType) {
Status = CB_DEVICE_ERROR; /* memory int error */
PRINT_DEBUG_MEM("Memory Device ERROR: DRAM "
"controller detected type != "
"type got from SPD\r");
break;
}
DramAttr->DimmInfo[Sockets].bPresence = TRUE;
/*calculate load number (chips number) */
ModuleDataWidth =
(u8) (DramAttr->DimmInfo[Sockets].
SPDDataBuf[SPD_SDRAM_MOD_DATA_WIDTH +
1]);
/* Calculate load number (chips number). */
ModuleDataWidth = (u8) (DramAttr->
DimmInfo[Sockets].SPDDataBuf
[SPD_SDRAM_MOD_DATA_WIDTH + 1]);
ModuleDataWidth = (u8) (ModuleDataWidth << 8);
ModuleDataWidth |=
(u8) (DramAttr->DimmInfo[Sockets].
SPDDataBuf[SPD_SDRAM_MOD_DATA_WIDTH]);
ChipWidth =
(u8) ((DramAttr->DimmInfo[Sockets].
SPDDataBuf[SPD_SDRAM_WIDTH]) & 0x7F);
ModuleDataWidth |= (u8) (DramAttr->
DimmInfo[Sockets].SPDDataBuf
[SPD_SDRAM_MOD_DATA_WIDTH]);
ChipWidth = (u8) ((DramAttr->
DimmInfo[Sockets].SPDDataBuf
[SPD_SDRAM_WIDTH]) & 0x7F);
LoadNum = (u8) (ModuleDataWidth / ChipWidth);
/*set the RANK map */
RankNum = (u8) (pSPDDataBuf[SPD_SDRAM_DIMM_RANKS] & 0x3); /*get bit0,1, the Most number of supported RANK is 2 */
/* Set the RANK map. */
/* Get bit0,1, the most number of supported RANK is 2. */
RankNum = (u8) (pSPDDataBuf[SPD_SDRAM_DIMM_RANKS] & 0x3);
if (RAMTYPE_SDRAMDDR2 == DramAttr->DramType)
RankNum++; /*for DDR bit[0,1] 01->1 RANK 10->2 RANK; for DDR2 bit[0,1] = 00 -> 1 RANK 01 -> 2 RANK */
if (RankNum != 2 && RankNum != 1) { /*every DIMM have 1 or 2 ranks */
/*
* For DDR bit[0,1]: 01->1 RANK, 10->2 RANK
* For DDR2 bit[0,1]: 00->1 RANK, 01->2 RANK
*/
RankNum++;
/* Every DIMM have 1 or 2 ranks. */
if (RankNum != 2 && RankNum != 1) {
Status = CB_DEVICE_ERROR;
PRINT_DEBUG_MEM
("Memory Device ERROR: the number of RANK not support!\r");
PRINT_DEBUG_MEM("Memory Device ERROR: Number "
"of RANK not supported!\r");
break;
}
if (Sockets < 2) { /*sockets0,1 is channel A */
if (Sockets < 2) { /* Sockets0,1 is channel A */
DramAttr->RankNumChA =
(u8) (DramAttr->RankNumChA + RankNum);
DramAttr->DimmNumChA++;
DramAttr->LoadNumChA =
(u8) (DramAttr->LoadNumChA * LoadNum *
RankNum);
} else { /*sockets2,3 is channel B */
} else { /* Sockets2,3 is channel B */
DramAttr->RankNumChB =
(u8) (DramAttr->RankNumChB + RankNum);
DramAttr->DimmNumChB++;
@ -175,12 +182,12 @@ CB_STATUS GetInfoFromSPD(DRAM_SYS_ATTR * DramAttr)
(u8) (DramAttr->LoadNumChB * LoadNum *
RankNum);;
}
RankNum |= 1; /*set rank map */
DramAttr->RankPresentMap |=
(RankNum << (Sockets * 2));
RankNum |= 1; /* Set rank map. */
DramAttr->RankPresentMap |= (RankNum << (Sockets * 2));
bFind = TRUE;
}
}
PRINT_DEBUG_MEM("Rank Present Map:");
PRINT_DEBUG_MEM_HEX8(DramAttr->RankPresentMap);
PRINT_DEBUG_MEM("\r");

392
src/northbridge/via/vx800/dev_init.c
View File

@ -17,21 +17,17 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
void DRAMSetVRNum(DRAM_SYS_ATTR * DramAttr, u8 PhyRank, // Physical Rank
u8 VirRank, // Virtual Rank
BOOLEAN Enable);
void SetEndingAddr(DRAM_SYS_ATTR * DramAttr, u8 VirRank, // Ending address register number indicator (INDEX
INT8 Value // (value) add or subtract value to this and after banks
);
void InitDDR2CHA(DRAM_SYS_ATTR * DramAttr);
void InitDDR2CHB(DRAM_SYS_ATTR * DramAttr);
void InitDDR2CHC(DRAM_SYS_ATTR * DramAttr);
void DRAMSetVRNum(DRAM_SYS_ATTR *DramAttr, u8 PhyRank /* physical rank */,
u8 VirRank /* virtual rank */, BOOLEAN Enable);
void SetEndingAddr(DRAM_SYS_ATTR *DramAttr, u8 VirRank /* Ending address
register number indicator (INDEX */, INT8 Value /* (value)
add or subtract value to this and after banks. */);
void InitDDR2CHA(DRAM_SYS_ATTR *DramAttr);
void InitDDR2CHB(DRAM_SYS_ATTR *DramAttr);
void InitDDR2CHC(DRAM_SYS_ATTR *DramAttr);
CB_STATUS VerifyChc();
/*===================================================================
Function : DRAMRegInitValue()
Precondition :
@ -43,7 +39,7 @@ Purpose : Set necessary register before DRAM initialize
===================================================================*/
static const u8 DramRegTbl[][3] = {
//Register AND OR
/* Reg AND OR */
{0x50, 0x11, 0xEE}, // DDR default MA7 for DRAM init
{0x51, 0x11, 0x60}, // DDR default MA3 for CHB init
{0x52, 0x00, 0x33}, // DDR use BA0=M17, BA1=M18,
@ -56,26 +52,31 @@ static const u8 DramRegTbl[][3] = {
{0x60, 0x00, 0x00}, // disable fast turn-around
{0x65, 0x00, 0xD9}, // AGP timer = 0XD; Host timer = 8;
{0x66, 0x00, 0x88}, //DRAMC Queue Size = 4; park at the last bus owner,Priority promotion timer = 8
{0x66, 0x00, 0x88}, // DRAMC Queue Size = 4; park at the last bus
// owner,Priority promotion timer = 8
{0x68, 0x00, 0x0C},
{0x69, 0xF0, 0x04}, // set RX69[3:0]=0000b
{0x6A, 0x00, 0x00}, // refresh counter
{0x6E, 0xF8, 0x80}, //must set 6E[7],or else DDR2 probe test will fail
// In here, we not set RX70~RX74, because we just init DRAM but no need R/W DRAM,
// when we check DQS input/output delay, then we need R/W DRAM.
{0x6E, 0xF8, 0x80}, // must set 6E[7], or else DDR2 probe test
// will fail
/*
* In here, we not set RX70~RX74, because we just init DRAM but no
* need R/W DRAM, when we check DQS input/output delay, then we need
* R/W DRAM.
*/
//{0x79, 0x00, 0x8F },
// {0x79, 0x00, 0x8F },
{0x85, 0x00, 0x00},
// {0x90, 0x87, 0x78 },
// {0x91, 0x00, 0x46 },
// {0x90, 0x87, 0x78 },
// {0x91, 0x00, 0x46 },
{0x40, 0x00, 0x00},
{0, 0, 0}
};
void DRAMRegInitValue(DRAM_SYS_ATTR * DramAttr)
void DRAMRegInitValue(DRAM_SYS_ATTR *DramAttr)
{
u8 Idx, CL;
u8 Data;
u8 Idx, CL, Data;
for (Idx = 0; DramRegTbl[Idx][0] != 0; Idx++) {
Data = pci_read_config8(MEMCTRL, DramRegTbl[Idx][0]);
@ -87,68 +88,69 @@ void DRAMRegInitValue(DRAM_SYS_ATTR * DramAttr)
Data = 0x80;
pci_write_config8(PCI_DEV(0, 0, 4), 0xa3, Data);
//set Dram Controllor mode
// Set DRAM controller mode. */
Data = pci_read_config8(MEMCTRL, 0x6c);
Data &= 0xFB;
if (ENABLE_CHC == 0) {
Data |= 0x4; //only CHA 64 bit mode
Data |= 0x4; /* Only CHA 64 bit mode */
pci_write_config8(MEMCTRL, 0x6c, Data);
} else {
Data |= 0x0; //CHA + CHC
Data |= 0x0; /* CHA + CHC */
pci_write_config8(MEMCTRL, 0x6c, Data);
//Data = 0xAA;
//pci_write_config8(MEMCTRL, 0xb1, Data);
// Data = 0xAA;
// pci_write_config8(MEMCTRL, 0xb1, Data);
//set CHB DQSB input delay, or else will meet error which is some byte is right
//but another bit is error
// set CHB DQSB input delay, or else will meet error which
// is some byte is right but another bit is error.
Data = pci_read_config8(MEMCTRL, 0xff);
Data = (Data & 0x03) | 0x3D;
pci_write_config8(MEMCTRL, 0xff, Data);
//enable CHC RXDB[7]
//Data=pci_read_config8(MEMCTRL, 0xdb);
// Data = (Data & 0x7F) | 0x80;
//pci_write_config8(MEMCTRL, 0xdb, Data);
// enable CHC RXDB[7]
// Data = pci_read_config8(MEMCTRL, 0xdb);
// Data = (Data & 0x7F) | 0x80;
// pci_write_config8(MEMCTRL, 0xdb, Data);
//rx62[2:0],CHA and CHB CL
// rx62[2:0], CHA and CHB CL
Data = pci_read_config8(MEMCTRL, 0x62);
CL = Data & 0x07;
//if CL = 6 , so I set CHB CL = 5 default
// If CL = 6, so I set CHB CL = 5 default.
if (CL >= 4)
CL = 3;
// set CHC Read CL rxDC[6:7]
/* Set CHC Read CL rxDC[6:7]. */
Data = pci_read_config8(MEMCTRL, 0xdc);
Data = (Data & 0x3F) | (CL << 6);
pci_write_config8(MEMCTRL, 0xdc, Data);
// set CHC write CL rxDF[6:7]
/* Set CHC write CL rxDF[6:7]. */
Data = pci_read_config8(MEMCTRL, 0xdf);
Data = (Data & 0x3F) | (CL << 6);
pci_write_config8(MEMCTRL, 0xdf, Data);
// set CHC ODT RxDC[5:0]
/* Set CHC ODT RxDC[5:0] */
Data = pci_read_config8(MEMCTRL, 0xdc);
Data = (Data & 0xC0) | 0x03;
pci_write_config8(MEMCTRL, 0xdc, Data);
//set column type RXDD[6] and enable ODT PAD RXDD[7]
/* Set column type RXDD[6] and enable ODT PAD RXDD[7]. */
Data = pci_read_config8(MEMCTRL, 0xdd);
Data |= 0x80;
Idx = DramAttr->DimmInfo[2].SPDDataBuf[SPD_SDRAM_COL_ADDR];
if ((Idx & 0x0F) == 10)
Data |= 0x40; //MA9~MA0
Data |= 0x40; /* MA9~MA0 */
else
Data &= 0xBF; //MA8~MA0
Data &= 0xBF; /* MA8~MA0 */
pci_write_config8(MEMCTRL, 0xdd, Data);
}
// Disable read DRAM fast ready ;Rx51[7]
// Disable Read Around Write ;Rx51[6]
// Disable Consecutive Read ;RX52[1:0]
// disable speculative read
// Disable Read DRAM fast ready ;Rx51[7]
// Disable Read Around Write ;Rx51[6]
// Disable Consecutive Read ;RX52[1:0]
// Disable Speculative Read
}
/*===================================================================
@ -163,18 +165,18 @@ Purpose : DRAM initialize according to the bios porting guid
#define EXIST_TEST_PATTERN 0x55555555
#define NOT_EXIST_TEST_PATTERN 0xAAAAAAAA
BOOLEAN ChkForExistLowBank()
BOOLEAN ChkForExistLowBank(void)
{
u32 *Address, data32;
// Check Pattern
/* Check pattern */
Address = (u32 *) 8;
*Address = EXIST_TEST_PATTERN;
Address = (u32 *) 4;
*Address = EXIST_TEST_PATTERN;
// _asm {WBINVD}
// _asm {WBINVD}
WaitMicroSec(100);
Address = (u32 *) 8;
data32 = *Address;
@ -185,15 +187,14 @@ BOOLEAN ChkForExistLowBank()
if (data32 != EXIST_TEST_PATTERN)
return FALSE;
// Check not Pattern
/* Check not Pattern */
Address = (u32 *) 8;
*Address = NOT_EXIST_TEST_PATTERN;
Address = (u32 *) 4;
*Address = NOT_EXIST_TEST_PATTERN;
//_asm {WBINVD}
// _asm {WBINVD}
WaitMicroSec(100);
Address = (u32 *) 8;
data32 = *Address;
if (data32 != (u32) (NOT_EXIST_TEST_PATTERN))
@ -206,9 +207,10 @@ BOOLEAN ChkForExistLowBank()
return TRUE;
}
void InitDDR2CHC(DRAM_SYS_ATTR * DramAttr);
void InitDDR2CHB(DRAM_SYS_ATTR * DramAttr);
void DRAMInitializeProc(DRAM_SYS_ATTR * DramAttr)
void InitDDR2CHC(DRAM_SYS_ATTR *DramAttr);
void InitDDR2CHB(DRAM_SYS_ATTR *DramAttr);
void DRAMInitializeProc(DRAM_SYS_ATTR *DramAttr)
{
u8 shift, idx;
BOOLEAN Status;
@ -216,11 +218,14 @@ void DRAMInitializeProc(DRAM_SYS_ATTR * DramAttr)
shift = 1;
for (idx = 0; idx < MAX_RANKS; idx++) {
if ((DramAttr->RankPresentMap & shift) != 0) {
// Set VR# to physical rank indicated = PR + physical rank enable bit
/*
* Set VR# to physical rank indicated = PR + physical
* rank enable bit.
*/
DRAMSetVRNum(DramAttr, idx, idx, TRUE);
SetEndingAddr(DramAttr, idx, 0x10); // assume 1G size
if (idx < 4) //CHA init
InitDDR2CHA(DramAttr); //temp wjb 2007/1 only for compiling
SetEndingAddr(DramAttr, idx, 0x10); /* Assume 1G size */
if (idx < 4) /* CHA init */
InitDDR2CHA(DramAttr); // temp wjb 2007/1 only for compiling
// in the function InitDDR2,the parameter is no need
Status = ChkForExistLowBank();
if (Status == TRUE) {
@ -228,7 +233,11 @@ void DRAMInitializeProc(DRAM_SYS_ATTR * DramAttr)
} else {
PRINT_DEBUG_MEM(" F\r");
}
// Set VR# to physical rank indicated = 00h + physical rank enable bit
/*
* Set VR# to physical rank indicated = 00h + physical
* rank enable bit.
*/
DRAMSetVRNum(DramAttr, idx, 0, FALSE);
SetEndingAddr(DramAttr, idx, -16);
}
@ -239,7 +248,6 @@ void DRAMInitializeProc(DRAM_SYS_ATTR * DramAttr)
}
/*===================================================================
Function : DRAMSetVRNUM()
Precondition :
@ -255,12 +263,11 @@ Purpose : Set virtual rank number for physical rank
Program when necessary, otherwise don't touch the pr-vr-mapping registers
===================================================================*/
void DRAMSetVRNum(DRAM_SYS_ATTR * DramAttr, u8 PhyRank, // Physical Rank
u8 VirRank, // Virtual Rank
BOOLEAN Enable)
void DRAMSetVRNum(DRAM_SYS_ATTR *DramAttr, u8 PhyRank /* physical rank */,
u8 VirRank /* virtual rank */, BOOLEAN Enable)
{
u8 Data;
u8 AndData, OrData;
u8 Data, AndData, OrData;
Data = pci_read_config8(MEMCTRL, (0x54 + (PhyRank >> 1)));
OrData = 0;
@ -268,17 +275,17 @@ void DRAMSetVRNum(DRAM_SYS_ATTR * DramAttr, u8 PhyRank, // Physical Rank
OrData |= 0x08;
OrData |= VirRank;
if ((PhyRank & 0x01) == 0x00) {
AndData = 0x0F; // keep the value of odd rank on PR # is even(keep 1,3,5,7)
AndData = 0x0F; // keep the value of odd rank on PR # is even(keep 1,3,5,7)
OrData <<= 4; // VR #, value to be set
} else {
AndData = 0xF0; // keep the value of even rank on PR # is odd(keep 0,2,4,6)
}
Data &= AndData;
Data |= OrData;
pci_write_config8(MEMCTRL, (0x54 + (PhyRank >> 1)), Data);
}
/*===================================================================
Function : SetEndingAddr()
Precondition :
@ -291,17 +298,17 @@ Output : Void
Purpose : Set ending address of virtual rank specified by VirRank
===================================================================*/
void SetEndingAddr(DRAM_SYS_ATTR * DramAttr, u8 VirRank, // Ending address register number indicator (INDEX
INT8 Value // (value) add or subtract value to this and after banks
) {
void SetEndingAddr(DRAM_SYS_ATTR *DramAttr, u8 VirRank, /* ending address
register number indicator (INDEX */, INT8 Value /* (value)
add or subtract value to this and after banks */) {
u8 Data;
// Read register,Rx40-Rx47(0,1,2,3,4,5,6,7) and set the ending address
/* Read register,Rx40-Rx47(0,1,2,3,4,5,6,7) and set ending address. */
Data = pci_read_config8(MEMCTRL, 0x40 + VirRank);
Data = (u8) (Data + Value);
pci_write_config8(MEMCTRL, 0x40 + VirRank, Data);
//program the virank's begining address to zero
/* Program the virank's begining address to zero. */
Data = 0x00;
pci_write_config8(MEMCTRL, 0x48 + VirRank, Data);
}
@ -335,48 +342,51 @@ static const u16 CHA_DDR2_MRS_table[5] = { 0x0150, 0x01D0, 0x0250, 0x02D0, 0x350
#define CHA_MRS_DDR2_TWR6 (1 << 13) + (0 << 20) + (1 << 12) // Value = 003000h
// DDR2 Twr=2 Twr=3 Twr=4 Twr=5
static const u32 CHA_DDR2_Twr_table[5] =
{ CHA_MRS_DDR2_TWR2, CHA_MRS_DDR2_TWR3, CHA_MRS_DDR2_TWR4,
CHA_MRS_DDR2_TWR5, CHA_MRS_DDR2_TWR6 };
static const u32 CHA_DDR2_Twr_table[5] = {
CHA_MRS_DDR2_TWR2, CHA_MRS_DDR2_TWR3, CHA_MRS_DDR2_TWR4,
CHA_MRS_DDR2_TWR5, CHA_MRS_DDR2_TWR6
};
#define CHA_OCD_Exit_150ohm 0x20200 // EMRS(1), BA0=1, MA9=MA8=MA7=0,MA6=1,MA2=0 (DRAM bus address)
// A17=1, A12=A11=A10=0,A9=1 ,A5=0 (CPU address)
#define CHA_OCD_Default_150ohm 0x21E00 // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=1,MA2=0 (DRAM bus address)
#define CHA_OCD_Default_150ohm 0x21E00 // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=1,MA2=0 (DRAM bus address)
// A17=1, A12=A11=A10=1,A9=1 ,A5=0 (CPU address)
#define CHA_OCD_Exit_75ohm 0x20020 // EMRS(1), BA0=1, MA9=MA8=MA7=0,MA6=0,MA2=1 (DRAM bus address)
// A17=1, A12=A11=A10=0,A9=0 ,A5=1 (CPU address)
#define CHA_OCD_Default_75ohm 0x21C20 // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=0,MA2=1 (DRAM bus address)
#define CHA_OCD_Default_75ohm 0x21C20 // EMRS(1), BA0=1, MA9=MA8=MA7=1,MA6=0,MA2=1 (DRAM bus address)
// A17=1, A12=A11=A10=1,A9=0 ,A5=1 (CPU address)
void InitDDR2CHA(DRAM_SYS_ATTR * DramAttr)
void InitDDR2CHA(DRAM_SYS_ATTR *DramAttr)
{
u8 Data;
u8 Reg6BVal;
u8 Idx, CL, BL, Twr;
u8 Data, Reg6BVal, Idx, CL, BL, Twr, DimmNum;
u32 AccessAddr;
u8 DimmNum;
// step2.
//disable bank paging and multi page
/* Step 2 */
/* Disable bank paging and multi page. */
Data = pci_read_config8(MEMCTRL, 0x69);
Data &= ~0x03;
pci_write_config8(MEMCTRL, 0x69, Data);
Reg6BVal = pci_read_config8(MEMCTRL, 0x6b);
Reg6BVal &= ~0x07;
// Step 3.
// At least one NOP cycle will be issued after the 1m sec device deselect.
/* Step 3 */
/* At least one NOP cycle will be issued after the 1m sec device
* deselect.
*/
Data = Reg6BVal | 0x01;
pci_write_config8(MEMCTRL, 0x6b, Data);
// step4.
//Read a double word from any address of the DIMM
/* Step 4 */
/* Read a double word from any address of the DIMM. */
DimmRead(0x0);
// Step 5.
// A minimum pause of 200u sec will be provided after the NOP.
// - <<< reduce BOOT UP time >>> -
// Loop 200us
/* Step 5 */
/*
* A minimum pause of 200u sec will be provided after the NOP.
* - <<< reduce BOOT UP time >>> -
* Loop 200us
*/
for (Idx = 0; Idx < 0x10; Idx++)
WaitMicroSec(100);
@ -386,7 +396,7 @@ void InitDDR2CHA(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x6b, Data);
// Step7.
//Read a double word from any address of the DIMM
// Read a double word from any address of the DIMM
DimmRead(0x0);
// Step 8.
@ -394,48 +404,46 @@ void InitDDR2CHA(DRAM_SYS_ATTR * DramAttr)
Data = Reg6BVal | 0x03;
pci_write_config8(MEMCTRL, 0x6b, Data);
// Step 9,10. check ODT value for EMRS(1) command
// according to ODTLookUp_TBL in driving_setting.c if there is one dimm in MB's one channel , the DDR2's ODT is 150ohm
// if there is two dimm in MB's one channel, the DDR2's ODT is 75 ohm
/* Step 9, 10.
*
* Check ODT value for EMRS(1) command according to ODTLookUp_TBL
* in driving_setting.c if there is one DIMM in MB's one channel,
* the DDR2's ODT is 150ohm if there is two DIMM in MB's one channel,
* the DDR2's ODT is 75 ohm.
*/
DimmNum = DramAttr->DimmNumChA;
if (DimmNum == 1) //DDR's ODT is 150ohm
{
if (DimmNum == 1) { /* DDR's ODT is 150ohm */
AccessAddr = (u32) CHA_MRS_DLL_150[0];
DimmRead(AccessAddr); //issue EMRS DLL Enable
DimmRead(AccessAddr); /* Issue EMRS DLL Enable. */
PRINT_DEBUG_MEM("Step 9 Address ");
PRINT_DEBUG_MEM_HEX32(AccessAddr);
PRINT_DEBUG_MEM("\r");
AccessAddr = (u32) CHA_MRS_DLL_150[1];
DimmRead(AccessAddr); //issue MRS DLL Reset
DimmRead(AccessAddr); /* Issue MRS DLL Reset. */
PRINT_DEBUG_MEM("Step 10 Address ");
PRINT_DEBUG_MEM_HEX32(AccessAddr);
PRINT_DEBUG_MEM("\r");
} else if (DimmNum == 2) //DDR's ODT is 75ohm
{
} else if (DimmNum == 2) { /* DDR's ODT is 75ohm */
AccessAddr = (u32) CHA_MRS_DLL_75[0];
DimmRead(AccessAddr); //issue EMRS DLL Enable
DimmRead(AccessAddr); /* Issue EMRS DLL Enable. */
AccessAddr = (u32) CHA_MRS_DLL_75[1];
DimmRead(AccessAddr); //issue MRS DLL Reset
DimmRead(AccessAddr); /* Issue MRS DLL Reset. */
} else {
PRINT_DEBUG_MEM("Dimm NUM ERROR:");
PRINT_DEBUG_MEM_HEX8(DimmNum);
PRINT_DEBUG_MEM("\r");
}
// Step 11.
// Precharge all (PALL) will be issued to the DDR.
/* Step 11. Precharge all (PALL) will be issued to the DDR. */
Data = Reg6BVal | 0x02;
pci_write_config8(MEMCTRL, 0x6b, Data);
// Step12.
//Read a double word from any address of the DIMM
/* Step 12. Read a double word from any address of the DIMM. */
DimmRead(0x0);
// Step 13.
// Execute 8 CBR refresh
/* Step 13. Execute 8 CBR refresh. */
Data = Reg6BVal | 0x04;
pci_write_config8(MEMCTRL, 0x6b, Data);
@ -446,70 +454,70 @@ void InitDDR2CHA(DRAM_SYS_ATTR * DramAttr)
WaitMicroSec(100);
}
// Step 17.
// enable MRS for MAA
/* Step 17. Enable MRS for MAA. */
Data = Reg6BVal | 0x03;
pci_write_config8(MEMCTRL, 0x6b, Data);
//Step 18
//the SDRAM parameters.(Burst Length, CAS# Latency , Write recovery etc.)
//-------------------------------------------------------------
//Burst Length : really offset Rx6c[3]
/*
* Step 18. The SDRAM parameters (Burst Length, CAS# Latency,
* Write recovery etc.)
*/
/* Burst Length: really offset Rx6c[3] */
Data = pci_read_config8(MEMCTRL, 0x6c);
BL = (Data & 0x08) >> 3;
// CL = really offset RX62[2:0]
/* CL: really offset RX62[2:0] */
Data = pci_read_config8(MEMCTRL, 0x62);
CL = Data & 0x03;
AccessAddr = (u32) (CHA_DDR2_MRS_table[CL]);
if (BL) {
if (BL)
AccessAddr += 8;
}
//Write recovery : really offset Rx63[7-5]
/* Write recovery: really offset Rx63[7-5] */
Data = pci_read_config8(MEMCTRL, 0x63);
Twr = (Data & 0xE0) >> 5;
AccessAddr += CHA_DDR2_Twr_table[Twr];
// AccessAddr = 0x1012D8;
DimmRead(AccessAddr); // Set MRS command
DimmRead(AccessAddr); /* Set MRS command. */
PRINT_DEBUG_MEM("Step 18 Address");
PRINT_DEBUG_MEM_HEX32(AccessAddr);
PRINT_DEBUG_MEM("\r");
//Step 19,20
if (DimmNum == 1) //DDR's ODT is 150ohm
{
/* Step 19, 20 */
if (DimmNum == 1) { /* DDR's ODT is 150ohm */
AccessAddr = (u32) CHA_OCD_Default_150ohm;
DimmRead(AccessAddr); //issue EMRS OCD Default
DimmRead(AccessAddr); /* Issue EMRS OCD Default. */
PRINT_DEBUG_MEM("Step 19 Address ");
PRINT_DEBUG_MEM_HEX32(AccessAddr);
PRINT_DEBUG_MEM("\r");
AccessAddr = (u32) CHA_OCD_Exit_150ohm;
DimmRead(AccessAddr); //issue EMRS OCD Calibration Mode Exit
DimmRead(AccessAddr); /* Issue EMRS OCD Calibration Mode Exit. */
PRINT_DEBUG_MEM("Step 20 Address ");
PRINT_DEBUG_MEM_HEX32(AccessAddr);
PRINT_DEBUG_MEM("\r");
} else if (DimmNum == 2) //DDR's ODT is 75ohm
{
} else if (DimmNum == 2) { /* DDR's ODT is 75ohm */
AccessAddr = (u32) CHA_OCD_Default_75ohm;
DimmRead(AccessAddr); //issue EMRS OCD Default
DimmRead(AccessAddr); /* Issue EMRS OCD Default. */
AccessAddr = (u32) CHA_OCD_Exit_75ohm;
DimmRead(AccessAddr); //issue EMRS OCD Calibration Mode Exit
DimmRead(AccessAddr); /* Issue EMRS OCD Calibration Mode Exit. */
} else {
PRINT_DEBUG_MEM("Dimm NUM ERROR: ");
PRINT_DEBUG_MEM_HEX8(DimmNum);
PRINT_DEBUG_MEM("\r");
}
//Step 21
//After MRS the device should be ready for full functionality within 3 clocks
// after Tmrd is met.
/*
* Step 21. After MRS the device should be ready for full
* functionality within 3 clocks after Tmrd is met.
*/
Data = Reg6BVal;
pci_write_config8(MEMCTRL, 0x6b, Data);
// Enable bank paging and multi page
/* Enable bank paging and multi page. */
Data = pci_read_config8(MEMCTRL, 0x69);
Data |= 0x03;
pci_write_config8(MEMCTRL, 0x69, Data);
@ -593,7 +601,6 @@ void InitDDR2CHB(
Data |= 0x80;
pci_write_config8(MEMCTRL, 0xd3, Data);
// Step 7.
// A minimum pause of 200u sec will be provided after the NOP.
// - <<< reduce BOOT UP time >>> -
@ -657,7 +664,6 @@ void InitDDR2CHB(
Data |= 0x00;
pci_write_config8(MEMCTRL, 0xd3, Data);
//step 14. MSR DLL Reset
AccessAddr = CHB_MRS_DLL_150[1] >> 3;
Data =(u8) (AccessAddr & 0xff);
@ -727,7 +733,6 @@ void InitDDR2CHB(
Data |= 0x00;
pci_write_config8(MEMCTRL, 0xd3, Data);
//the SDRAM parameters.(Burst Length, CAS# Latency , Write recovery etc.)
//-------------------------------------------------------------
@ -739,7 +744,6 @@ void InitDDR2CHB(
Data=pci_read_config8(MEMCTRL, 0x62);
CL = Data & 0x03;
AccessAddr = (u32)(CHB_DDR2_MRS_table[CL]);
if (BL)
{
@ -798,7 +802,6 @@ void InitDDR2CHB(
Data |= (u8)((AccessAddr & 0x30000) >> 15);
pci_write_config8(MEMCTRL, 0xd7, Data);
//step 27. issue EMRS cycle
Data=pci_read_config8(MEMCTRL, 0xd3);
Data &= 0x7F;
@ -848,7 +851,6 @@ void InitDDR2CHB(
Data &= 0xF9;
pci_write_config8(MEMCTRL, 0xd7, Data);
//step 30. normal SDRAM Mode
Data=pci_read_config8(MEMCTRL, 0xd7);
Data &= 0xC7;
@ -872,6 +874,7 @@ void InitDDR2CHB(
pci_write_config8(MEMCTRL, 0x69, Data);
}
*/
/*===================================================================
Function : InitDDR2CHC()
Precondition :
@ -885,132 +888,128 @@ Reference :
// DDR2 CL=2 CL=3 CL=4 CL=5 (Burst type=interleave)(WR fine tune in code)
static const u16 CHC_MRS_table[4] = { 0x22B, 0x23B, 0x24B, 0x25B }; // Use 1X-bandwidth MA table to init DRAM
void InitDDR2CHC(DRAM_SYS_ATTR * DramAttr)
void InitDDR2CHC(DRAM_SYS_ATTR *DramAttr)
{
u8 Data;
u8 Idx, CL, Twr;
u8 Data, Idx, CL, Twr;
u32 AccessAddr;
CB_STATUS Status;
// step3.
//clear RxDF[2] to disable Tri-state output
/* Step 3. Clear RxDF[2] to disable Tri-state output. */
Data = pci_read_config8(MEMCTRL, 0xdf);
Data &= 0xFB;
pci_write_config8(MEMCTRL, 0xdf, Data);
//step 4. Enable the initialization mode of DRAM Controller C with NB's PLL clock
/*
* Step 4. Enable the initialization mode of DRAM Controller C with
* NB's PLL clock.
*/
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x60;
pci_write_config8(MEMCTRL, 0xdb, Data);
//Step 5. NOP command enable
/* Step 5. NOP command enable. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data &= 0xE3;
Data |= 0x00;
pci_write_config8(MEMCTRL, 0xdb, Data);
//Step 6. issue a nop cycle,RegDB[1] 0 -> 1
/* Step 6. Issue a nop cycle, RegDB[1] 0 -> 1. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
pci_write_config8(MEMCTRL, 0xdb, Data);
Data &= 0xFD;
pci_write_config8(MEMCTRL, 0xdb, Data);
// Step 7.
// A minimum pause of 200u sec will be provided after the NOP.
// - <<< reduce BOOT UP time >>> -
// Loop 200us
/*
* Step 7.
* A minimum pause of 200u sec will be provided after the NOP.
* - <<< reduce BOOT UP time >>> -
* Loop 200us
*/
for (Idx = 0; Idx < 0x10; Idx++)
WaitMicroSec(100);
// Step 8.
// signal bank precharge command enable
/* Step 8. Signal bank precharge command enable. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data &= 0xE3;
Data |= 0x14;
pci_write_config8(MEMCTRL, 0xdb, Data);
//set MA10 =1, precharge all bank
/* Set MA10 = 1, precharge all bank. */
Data = 0x00;
pci_write_config8(MEMCTRL, 0xf8, Data);
Data = 0x04;
pci_write_config8(MEMCTRL, 0xf9, Data);
//step 9. issue a precharge all cycle,RegD3[7] 0 -> 1
/* step 9. Issue a precharge all cycle, RegD3[7] 0 -> 1. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
pci_write_config8(MEMCTRL, 0xdb, Data);
Data &= 0xFD;
pci_write_config8(MEMCTRL, 0xdb, Data);
//step10. MRS enable
/* Step 10. MRS enable. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data &= 0xE3;
Data |= 0x1C;
pci_write_config8(MEMCTRL, 0xdb, Data);
//step11. EMRS DLL enable and Disable DQS
/* Step 11. EMRS DLL enable and Disable DQS. */
Data = 0x40;
pci_write_config8(MEMCTRL, 0xf8, Data);
Data = 0x24;
pci_write_config8(MEMCTRL, 0xf9, Data);
//step12. issue EMRS cycle
/* Step 12. Issue EMRS cycle. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
pci_write_config8(MEMCTRL, 0xdb, Data);
Data &= 0xFD;
pci_write_config8(MEMCTRL, 0xdb, Data);
//step13. MSR enable
/* Step 13. MSR enable. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data &= 0xE3;
Data |= 0x1C;
pci_write_config8(MEMCTRL, 0xdb, Data);
//step 14. MSR DLL Reset
/* Step 14. MSR DLL Reset. */
Data = 0x00;
pci_write_config8(MEMCTRL, 0xf8, Data);
Data = 0x01;
pci_write_config8(MEMCTRL, 0xf9, Data);
//step15. issue MRS cycle
/* Step 15. Issue MRS cycle. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
pci_write_config8(MEMCTRL, 0xdb, Data);
Data &= 0xFD;
pci_write_config8(MEMCTRL, 0xdb, Data);
//step16. signal banks precharge command enable
/* Step 16. Signal banks precharge command enable. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data &= 0xE3;
Data |= 0x14;
pci_write_config8(MEMCTRL, 0xdb, Data);
//set MA10 =1, precharge all bank
/* Set MA10 = 1, precharge all bank. */
Data = 0x00;
pci_write_config8(MEMCTRL, 0xf8, Data);
Data = 0x04;
pci_write_config8(MEMCTRL, 0xf9, Data);
// step17. issue precharge all cycle
/* Step 17. Issue precharge all cycle. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
pci_write_config8(MEMCTRL, 0xdb, Data);
Data &= 0xFD;
pci_write_config8(MEMCTRL, 0xdb, Data);
//step18. CBR cycle enable
/* Step 18. CBR cycle enable. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data &= 0xE3;
Data |= 0x18;
@ -1075,7 +1074,6 @@ void InitDDR2CHC(DRAM_SYS_ATTR * DramAttr)
Data |= 0x1C;
pci_write_config8(MEMCTRL, 0xdb, Data);
//step 26. OCD default
Data = 0xC0;
pci_write_config8(MEMCTRL, 0xf8, Data);
@ -1097,7 +1095,6 @@ void InitDDR2CHC(DRAM_SYS_ATTR * DramAttr)
Data = 0x24;
pci_write_config8(MEMCTRL, 0xf9, Data);
//step 29. issue EMRS cycle
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
@ -1114,7 +1111,7 @@ void InitDDR2CHC(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0xdb, Data);
}
CB_STATUS VerifyChc()
CB_STATUS VerifyChc(void)
{
u8 Data, ByteVal, Index, pad;
u16 row;
@ -1125,18 +1122,15 @@ CB_STATUS VerifyChc()
//verify each MA[0:12],BA[0:1]
pad = 1;
for (row = 0; row < 0x8000; row++) {
//set the write value;
//verify each MD[15:0]
/* Set the write value, Verify each MD[15:0]. */
for (Data = pad, Index = 0; Index < 16; Index++) {
Data <<= 1;
if (Data == 0)
Data = 1;
pci_write_config8(PCI_DEV(0, 0, 7), 0xC0 + Index,
Data);
pci_write_config8(PCI_DEV(0, 0, 7), 0xC0 + Index, Data);
}
//issue the bank active command
/* Issue the bank active command. */
// bank active command enable
Data = pci_read_config8(MEMCTRL, 0xdb);
Data &= 0xE3;
@ -1149,14 +1143,14 @@ CB_STATUS VerifyChc()
Data = (u8) ((row && 0xFF) >> 8);
pci_write_config8(MEMCTRL, 0xf9, Data);
// issue active cycle
/* Issue active cycle. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
pci_write_config8(MEMCTRL, 0xdb, Data);
Data &= 0xFD;
pci_write_config8(MEMCTRL, 0xdb, Data);
//issue ready/completion for read/write
/* Issue ready/completion for read/write. */
// read/completion command enable
Data = pci_read_config8(MEMCTRL, 0xdb);
Data &= 0xE3;
@ -1169,14 +1163,14 @@ CB_STATUS VerifyChc()
Data = 0x00;
pci_write_config8(MEMCTRL, 0xf9, Data);
// issue read/completion cycle
/* Issue read/completion cycle. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
pci_write_config8(MEMCTRL, 0xdb, Data);
Data &= 0xFD;
pci_write_config8(MEMCTRL, 0xdb, Data);
//issue write command
/* Issue write command. */
// write command enable
Data = pci_read_config8(MEMCTRL, 0xdb);
Data &= 0xE3;
@ -1189,7 +1183,7 @@ CB_STATUS VerifyChc()
Data = (u8) ((row & 0x60) << 5);
pci_write_config8(MEMCTRL, 0xf9, Data);
// issue write cycle
/* Issue write cycle. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
pci_write_config8(MEMCTRL, 0xdb, Data);
@ -1209,14 +1203,14 @@ CB_STATUS VerifyChc()
Data = 0x00;
pci_write_config8(MEMCTRL, 0xf9, Data);
// issue read/completion cycle
/* Issue read/completion cycle. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
pci_write_config8(MEMCTRL, 0xdb, Data);
Data &= 0xFD;
pci_write_config8(MEMCTRL, 0xdb, Data);
//issue the bank active command
/* Issue the bank active command. */
// bank active command enable
Data = pci_read_config8(MEMCTRL, 0xdb);
Data &= 0xE3;
@ -1289,21 +1283,19 @@ CB_STATUS VerifyChc()
Data = 0x00;
pci_write_config8(MEMCTRL, 0xf9, Data);
// issue read/completion cycle
/* Issue read/completion cycle. */
Data = pci_read_config8(MEMCTRL, 0xdb);
Data |= 0x2;
pci_write_config8(MEMCTRL, 0xdb, Data);
Data &= 0xFD;
pci_write_config8(MEMCTRL, 0xdb, Data);
//verify the value;
/* Verify the value. */
for (ByteVal = pad, Index = 0; Index < 16; Index++) {
Data =
pci_read_config8(PCI_DEV(0, 0, 7),
0xD0 + Index);
Data = pci_read_config8(PCI_DEV(0, 0, 7), 0xD0 + Index);
if (ByteVal != Data) {
PRINT_DEBUG_MEM
("error!!!! row = %x,Index =%x,Data = %x,ByteVal=%x\r");
PRINT_DEBUG_MEM("Error! row = %x, index =%x, "
"data = %x, byteval=%x\r");
}
ByteVal <<= 1;
if (ByteVal == 0)

1
src/northbridge/via/vx800/dqs_search.c
View File

@ -74,7 +74,6 @@ void SetDQSOutputCHA(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x71, Reg71);
}
//################
// STEP 12 #
//################

3
src/northbridge/via/vx800/dram_init.h
View File

@ -74,7 +74,6 @@
//#define DATAWIDTHX8 8
//#define DATAWIDTHX4 4
#define SPD_MEMORY_TYPE 2 /*Memory type FPM,EDO,SDRAM,DDR,DDR2 */
#define SPD_SDRAM_ROW_ADDR 3 /*Number of row addresses on this assembly */
#define SPD_SDRAM_COL_ADDR 4 /*Number of column addresses on this assembly */
@ -244,7 +243,6 @@ void DRAMBankInterleave(DRAM_SYS_ATTR * DramAttr);
/*Step14 Sizing*/
void DRAMSizingMATypeM(DRAM_SYS_ATTR * DramAttr);
//final_setting.c
/*Step15 DDR fresh counter setting*/
void DRAMRefreshCounter(DRAM_SYS_ATTR * DramAttr);
@ -253,7 +251,6 @@ void DRAMRefreshCounter(DRAM_SYS_ATTR * DramAttr);
/*Step16 Final register setting for improve performance*/
void DRAMRegFinalValue(DRAM_SYS_ATTR * DramAttr);
/*set UMA*/
void SetUMARam();

30
src/northbridge/via/vx800/dram_util.c
View File

@ -41,8 +41,8 @@ Reference : None
void via_write_phys(volatile u32 addr, volatile u32 value)
{
volatile u32 *ptr;
ptr = (volatile u32 *) addr;
*ptr = (volatile u32) value;
ptr = (volatile u32 *)addr;
*ptr = (volatile u32)value;
}
/*===================================================================
@ -59,12 +59,11 @@ u32 via_read_phys(volatile u32 addr)
volatile u32 *ptr;
volatile u32 y;
// ptr = (volatile u32 *)addr;
y = *(volatile u32 *) addr;
y = *(volatile u32 *)addr;
// return *ptr;
return y;
}
/*===================================================================
Function : DimmRead()
Precondition :
@ -77,12 +76,11 @@ Reference : None
u32 DimmRead(volatile u32 x)
{ // volatile u32 z;
volatile u32 y;
y = *(volatile u32 *) x;
y = *(volatile u32 *)x;
return y;
}
/*===================================================================
Function : DramBaseTest()
Precondition : this function used to verify memory
@ -116,8 +114,7 @@ BOOLEAN DramBaseTest(u32 BaseAdd, u32 Length,
}
//write each test unit the value with TEST_PATTERN
for (Address = BaseAdd; Address < BaseAdd + Length;
Address += TestSpan) {
for (Address = BaseAdd; Address < BaseAdd + Length; Address += TestSpan) {
for (i = 0; i < TestCount; i++)
via_write_phys(Address + i * 4, TEST_PATTERN);
if (PrintFlag) {
@ -131,15 +128,12 @@ BOOLEAN DramBaseTest(u32 BaseAdd, u32 Length,
//compare each test unit with the value of TEST_PATTERN
//and write it with compliment of TEST_PATTERN
for (Address = BaseAdd; Address < BaseAdd + Length;
Address += TestSpan) {
for (Address = BaseAdd; Address < BaseAdd + Length; Address += TestSpan) {
for (i = 0; i < TestCount; i++) {
Data = via_read_phys(Address + i * 4);
via_write_phys(Address + i * 4,
(u32) (~TEST_PATTERN));
via_write_phys(Address + i * 4, (u32) (~TEST_PATTERN));
if (Data != TEST_PATTERN) {
PRINT_DEBUG_MEM
("TEST_PATTERN ERROR !!!!! ");
PRINT_DEBUG_MEM("TEST_PATTERN ERROR !!!!! ");
Address2 = Address + i * 4;
PRINT_DEBUG_MEM_HEX32(Address2);
PRINT_DEBUG_MEM(" : ");
@ -157,16 +151,13 @@ BOOLEAN DramBaseTest(u32 BaseAdd, u32 Length,
}
}
//compare each test unit with the value of ~TEST_PATTERN
for (Address = BaseAdd; Address < BaseAdd + Length;
Address += TestSpan) {
for (Address = BaseAdd; Address < BaseAdd + Length; Address += TestSpan) {
for (i = (u8) (TestCount); i > 0; i--) {
Data = via_read_phys(Address + (i - 1) * 4);
if (Data != ~TEST_PATTERN) {
PRINT_DEBUG_MEM
("~TEST_PATTERN ERROR !!!!! ");
PRINT_DEBUG_MEM("~TEST_PATTERN ERROR !!!!! ");
Address2 = Address + (i - 1) * 4;
PRINT_DEBUG_MEM_HEX32(Address2);
PRINT_DEBUG_MEM(" : ");
@ -219,7 +210,6 @@ void DumpRegisters(INTN DevNum, INTN FuncNum)
return;
}
/*===================================================================
Function : dumpnorth()
Precondition :

14
src/northbridge/via/vx800/drdy_bl.c
View File

@ -102,7 +102,6 @@
#define Rx54L1T P6IF_Misc_RFASTH
#define Rx55L1T P6IF_Misc2_RHTSEL
#define PH0_0_0_0 0x00
#define PH0_0_0_1 0x01
#define PH0_0_0_2 0x02
@ -276,7 +275,6 @@ static const u8 PT894_128bit_DELAYMD1_RCONV0[6][6][PT894_RDRDY_TBL_Width] =
}
};
static const u8 PT894_64bit_DELAYMD0_RCONV0[6][6][PT894_RDRDY_TBL_Width] =
// -----------------------------------------------------------------------------------------------------------------
// RX60 RX61 RX62 RX63 RX64 RX65 RX66 RX67 RX54[3,1] RX55[3,1] CPU/DRAM
@ -341,7 +339,6 @@ static const u8 PT894_64bit_DELAYMD0_RCONV0[6][6][PT894_RDRDY_TBL_Width] =
}
};
static const u8 PT894_64bit_DELAYMD1_RCONV0[6][6][PT894_RDRDY_TBL_Width] =
// -----------------------------------------------------------------------------------------------------------------
// RX60 RX61 RX62 RX63 RX64 RX65 RX66 RX67 RX54[3,1] RX55[3,1] CPU/DRAM
@ -418,7 +415,7 @@ void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr)
this function has 3 switchs, correspond to 3 level of Drdy setting.
0:Slowest, 1:Default, 2:Optimize
you can only open one switch
*/
*/
#if 1 //this is slowest
// 0 -> Slowest
//Write slowest value to register
@ -541,7 +538,6 @@ void DRAMDRDYSetting(DRAM_SYS_ATTR * DramAttr)
#endif
}
/*This routine process the ability for North Bridge side burst functionality
There are 3 variances that are valid:
1. DIMM BL=8, chipset BL=8
@ -568,8 +564,9 @@ void DRAMBurstLength(DRAM_SYS_ATTR * DramAttr)
for (Sockets = 0; Sockets < 2; Sockets++) {
if (DramAttr->DimmInfo[Sockets].bPresence) {
BL &=
(DramAttr->DimmInfo[Sockets].
SPDDataBuf[SPD_SDRAM_BURSTLENGTH]);
(DramAttr->
DimmInfo[Sockets].SPDDataBuf
[SPD_SDRAM_BURSTLENGTH]);
}
}
@ -585,8 +582,7 @@ void DRAMBurstLength(DRAM_SYS_ATTR * DramAttr)
#if ENABLE_CHB
if (DramAttr->RankNumChB > 0) {
BL = DramAttr->DimmInfo[2].
SPDDataBuf[SPD_SDRAM_BURSTLENGTH];
BL = DramAttr->DimmInfo[2].SPDDataBuf[SPD_SDRAM_BURSTLENGTH];
//Rx6c[1], CHB burst length
if (BL & 0x08) /*CHB support BL=8 */
BL = 0x2; /*set bit1 */

2
src/northbridge/via/vx800/driving_clk_phase_data.h
View File

@ -67,4 +67,4 @@
//extern u8 Fixed_DQSB_1_2_Rank_Table[4][2];
//extern u8 Fixed_DQSB_3_4_Rank_Table[4][2];
#endif /* DRIVINGCLKPHASEDATA_H */
#endif /* DRIVINGCLKPHASEDATA_H */

10
src/northbridge/via/vx800/driving_setting.c
View File

@ -55,7 +55,6 @@ void DRAMDriving(DRAM_SYS_ATTR * DramAttr)
DrivingDCLK(DramAttr);
}
/*
ODT Control for DQ/DQS/CKE/SCMD/DCLKO in ChA & ChB
which include driving enable/range and strong/weak selection
@ -158,7 +157,6 @@ void DrivingODT(DRAM_SYS_ATTR * DramAttr)
Data |= 0;
pci_write_config8(MEMCTRL, 0x9e, Data);
if (DIMMFREQ_400 == DramAttr->DramFreq)
Data = 0x0;
else if (DIMMFREQ_533 == DramAttr->DramFreq)
@ -171,7 +169,6 @@ void DrivingODT(DRAM_SYS_ATTR * DramAttr)
Data = 0;
pci_write_config8(MEMCTRL, 0x9f, Data);
/*channel A ODT select */
if (DramAttr->DimmNumChA > 0) {
Data = pci_read_config8(MEMCTRL, 0xd5);
@ -190,7 +187,6 @@ void DrivingODT(DRAM_SYS_ATTR * DramAttr)
Data |= 0x00; /*if rank number is 1or2, clear bit7 */
pci_write_config8(MEMCTRL, 0xd7, Data);
/*channel A */
Data = pci_read_config8(MEMCTRL, 0xd5);
Data &= 0xF3; //bit2,3
@ -212,12 +208,10 @@ void DrivingODT(DRAM_SYS_ATTR * DramAttr)
}
if (!bFound) { /*set default value */
Data =
ODTLookup_TBL[ODTLookup_Tbl_count -
1][1];
ODTLookup_TBL[ODTLookup_Tbl_count - 1][1];
}
pci_write_config8(MEMCTRL, 0x9c, Data);
//set CHA MD ODT control State Dynamic-on
Data = pci_read_config8(MEMCTRL, 0xD4);
Data &= 0xC9;
@ -252,7 +246,6 @@ void DrivingODT(DRAM_SYS_ATTR * DramAttr)
Data |= 0x00; /*if rank number is 1or2, clear bit7 */
pci_write_config8(MEMCTRL, 0xd7, Data);
Data = pci_read_config8(MEMCTRL, 0xd5);
Data &= 0xFC;
if (DramAttr->DimmNumChB == 2) /*2 Dimm, 3or4 Ranks */
@ -267,7 +260,6 @@ void DrivingODT(DRAM_SYS_ATTR * DramAttr)
Data |= 0x08;
pci_write_config8(MEMCTRL, 0xD4, Data);
//enable CHB differential DQS input
Data = pci_read_config8(MEMCTRL, 0x9E);
Data |= 0x02;

4
src/northbridge/via/vx800/final_setting.c
View File

@ -51,8 +51,7 @@ void DRAMRefreshCounter(DRAM_SYS_ATTR * DramAttr)
Dram_256_Mb = 0;
for (i = 0; i < MAX_SOCKETS; i++) {
if (DramAttr->DimmInfo[i].SPDDataBuf[SPD_SDRAM_ROW_ADDR] ==
13) {
if (DramAttr->DimmInfo[i].SPDDataBuf[SPD_SDRAM_ROW_ADDR] == 13) {
Dram_256_Mb = 1;
break;
}
@ -63,7 +62,6 @@ void DRAMRefreshCounter(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x6a, Data);
}
/*===================================================================
Function : DRAMRegFinalValue()
Precondition :

28
src/northbridge/via/vx800/freq_setting.c
View File

@ -99,7 +99,6 @@ void DRAMFreqSetting(DRAM_SYS_ATTR * DramAttr)
}
/*
calculate CL and dram freq
DDR1
@ -134,13 +133,13 @@ void CalcCLAndFreq(DRAM_SYS_ATTR * DramAttr)
for (SckId = 0; SckId < MAX_SOCKETS; SckId++) {
if (DramAttr->DimmInfo[SckId].bPresence) { /*all DIMM supported CL */
AllDimmSupportedCL &=
(DramAttr->DimmInfo[SckId].
SPDDataBuf[SPD_SDRAM_CAS_LATENCY]);
(DramAttr->
DimmInfo[SckId].SPDDataBuf[SPD_SDRAM_CAS_LATENCY]);
}
}
if (!AllDimmSupportedCL) { /*if equal 0, no supported CL */
PRINT_DEBUG_MEM("SPD Data Error, Can not get CL !!!! \r");
for (;;);
for (;;) ;
}
/*Get CL Value */
@ -164,8 +163,8 @@ void CalcCLAndFreq(DRAM_SYS_ATTR * DramAttr)
for (SckId = 0; SckId < MAX_SOCKETS; SckId++) {
if (DramAttr->DimmInfo[SckId].bPresence) {
Tmp =
(DramAttr->DimmInfo[SckId].
SPDDataBuf[SPD_SDRAM_CAS_LATENCY]);
(DramAttr->
DimmInfo[SckId].SPDDataBuf[SPD_SDRAM_CAS_LATENCY]);
tmpMask = 0x40;
for (TmpId = 7; TmpId > 0; TmpId--) {
if ((Tmp & tmpMask) == tmpMask)
@ -174,16 +173,19 @@ void CalcCLAndFreq(DRAM_SYS_ATTR * DramAttr)
}
if (TmpId - BitId == 0) { /*get Cycle time for X, SPD BYTE9 */
TmpCycTime =
DramAttr->DimmInfo[SckId].
SPDDataBuf[SPD_SDRAM_TCLK_X];
DramAttr->
DimmInfo[SckId].SPDDataBuf
[SPD_SDRAM_TCLK_X];
} else if (TmpId - BitId == 1) { /*get Cycle time for X-1, SPD BYTE23 */
TmpCycTime =
DramAttr->DimmInfo[SckId].
SPDDataBuf[SPD_SDRAM_TCLK_X_1];
DramAttr->
DimmInfo[SckId].SPDDataBuf
[SPD_SDRAM_TCLK_X_1];
} else if (TmpId - BitId == 2) { /*get cycle time for X-2, SPD BYTE25 */
TmpCycTime =
DramAttr->DimmInfo[SckId].
SPDDataBuf[SPD_SDRAM_TCLK_X_2];
DramAttr->
DimmInfo[SckId].SPDDataBuf
[SPD_SDRAM_TCLK_X_2];
} else {
//error!!!
}
@ -194,7 +196,7 @@ void CalcCLAndFreq(DRAM_SYS_ATTR * DramAttr)
if (CycTime <= 0) {
//error!
for (;;);
for (;;) ;
}
/* cycle time value

2
src/northbridge/via/vx800/northbridge.h
View File

@ -22,4 +22,4 @@
extern unsigned int vx800_scan_root_bus(device_t root, unsigned int max);
#endif /* NORTHBRIDGE_VIA_VX800_H */
#endif /* NORTHBRIDGE_VIA_VX800_H */

1
src/northbridge/via/vx800/raminit.c
View File

@ -24,7 +24,6 @@
#define DEBUG_RAM_SETUP 1
#ifdef DEBUG_RAM_SETUP
#define PRINT_DEBUG_MEM(x) print_debug(x)
#define PRINT_DEBUG_MEM_HEX8(x) print_debug_hex8(x)

2
src/northbridge/via/vx800/raminit.h
View File

@ -21,4 +21,4 @@
#define RAMINIT_H
#define MEMCTRL PCI_DEV(0,0,3)
#endif /* RAMINIT_H */
#endif /* RAMINIT_H */

40
src/northbridge/via/vx800/rank_map.c
View File

@ -23,7 +23,6 @@ extern void DRAMSetVRNum(DRAM_SYS_ATTR * DramAttr,
extern void SetEndingAddr(DRAM_SYS_ATTR * DramAttr, u8 VirRank, // Ending address register number indicator (INDEX
INT8 Value); // (value) add or subtract value to this and after banks
void DRAMClearEndingAddress(DRAM_SYS_ATTR * DramAttr);
void DRAMSizingEachRank(DRAM_SYS_ATTR * DramAttr);
@ -57,8 +56,8 @@ void DRAMBankInterleave(DRAM_SYS_ATTR * DramAttr)
if ((DramAttr->RankPresentMap & Shift) != 0) {
CurrentDimminfo = &(DramAttr->DimmInfo[RankNO >> 1]); //this Rank in a dimm
SpdBAData =
(u8) (CurrentDimminfo->
SPDDataBuf[SPD_SDRAM_NO_OF_BANKS]);
(u8) (CurrentDimminfo->SPDDataBuf
[SPD_SDRAM_NO_OF_BANKS]);
if (SpdBAData == 4)
Count = 2;
else if (SpdBAData == 8)
@ -76,12 +75,10 @@ void DRAMBankInterleave(DRAM_SYS_ATTR * DramAttr)
Data |= (Bank << 6);
pci_write_config8(MEMCTRL, 0x69, Data);
if (DramAttr->DimmNumChB > 0) {
CurrentDimminfo = &(DramAttr->DimmInfo[3]); //this Rank in a dimm
SpdBAData =
(u8) (CurrentDimminfo->
SPDDataBuf[SPD_SDRAM_NO_OF_BANKS]);
(u8) (CurrentDimminfo->SPDDataBuf[SPD_SDRAM_NO_OF_BANKS]);
if (SpdBAData == 4)
Bank = 2;
else if (SpdBAData == 2)
@ -147,12 +144,9 @@ void DRAMSizingEachRank(DRAM_SYS_ATTR * DramAttr)
for (Slot = 0; Slot < 2; Slot++) {
if (!DramAttr->DimmInfo[Slot].bPresence)
continue;
Rows =
DramAttr->DimmInfo[Slot].
SPDDataBuf[SPD_SDRAM_ROW_ADDR];
Rows = DramAttr->DimmInfo[Slot].SPDDataBuf[SPD_SDRAM_ROW_ADDR];
Columns =
DramAttr->DimmInfo[Slot].
SPDDataBuf[SPD_SDRAM_COL_ADDR];
DramAttr->DimmInfo[Slot].SPDDataBuf[SPD_SDRAM_COL_ADDR];
Banks = DramAttr->DimmInfo[Slot].SPDDataBuf[SPD_SDRAM_NO_OF_BANKS]; //this is Bank number not Bank address bit
if (Banks == 4)
Banks = 2;
@ -164,8 +158,9 @@ void DRAMSizingEachRank(DRAM_SYS_ATTR * DramAttr)
RankIndex = 2 * Slot;
DramAttr->RankSize[RankIndex] = Size;
//if this module have two ranks
if ((DramAttr->DimmInfo[Slot].
SPDDataBuf[SPD_SDRAM_DIMM_RANKS] & 0x07) == 0x01) {
if ((DramAttr->
DimmInfo[Slot].SPDDataBuf[SPD_SDRAM_DIMM_RANKS] & 0x07) ==
0x01) {
RankIndex++;
DramAttr->RankSize[RankIndex] = Size;
}
@ -189,8 +184,7 @@ void DRAMSizingEachRank(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x53, Data);
}
#if 1
for (RankIndex = 0; DramAttr->RankSize[RankIndex] != 0;
RankIndex++) {
for (RankIndex = 0; DramAttr->RankSize[RankIndex] != 0; RankIndex++) {
PRINT_DEBUG_MEM("Rank:");
PRINT_DEBUG_MEM_HEX8(RankIndex);
PRINT_DEBUG_MEM(", Size:");
@ -235,11 +229,13 @@ void DRAMSetRankMAType(DRAM_SYS_ATTR * DramAttr)
if (DramAttr->DimmInfo[SlotNum].bPresence) {
for (j = 0; MAMapTypeTbl[j] != 0; j += 3) {
if ((1 << MAMapTypeTbl[j]) ==
DramAttr->DimmInfo[SlotNum].
SPDDataBuf[SPD_SDRAM_NO_OF_BANKS]
DramAttr->
DimmInfo[SlotNum].SPDDataBuf
[SPD_SDRAM_NO_OF_BANKS]
&& MAMapTypeTbl[j + 1] ==
DramAttr->DimmInfo[SlotNum].
SPDDataBuf[SPD_SDRAM_COL_ADDR]) {
DramAttr->
DimmInfo[SlotNum].SPDDataBuf
[SPD_SDRAM_COL_ADDR]) {
break;
}
}
@ -286,11 +282,9 @@ void DRAMSetEndingAddress(DRAM_SYS_ATTR * DramAttr)
End = End + Size; // calculate current ending address, add the current Size to ending
Vrank = RankNO; // get virtual Rank
Data = End; // set begin/End address register to correspondig virtual Rank #
pci_write_config8(MEMCTRL, 0x40 + Vrank,
Data);
pci_write_config8(MEMCTRL, 0x40 + Vrank, Data);
Data = Start;
pci_write_config8(MEMCTRL, 0x48 + Vrank,
Data);
pci_write_config8(MEMCTRL, 0x48 + Vrank, Data);
PRINT_DEBUG_MEM("Rank: ");
PRINT_DEBUG_MEM_HEX8(Vrank);
PRINT_DEBUG_MEM(", Start:");

53
src/northbridge/via/vx800/timing_setting.c
View File

@ -70,7 +70,6 @@ void DRAMTimingSetting(DRAM_SYS_ATTR * DramAttr)
SetTrtp(DramAttr);
}
/*
Set DRAM Timing: CAS Latency for DDR1
D0F3RX62 bit[0:2] for CAS Latency;
@ -91,7 +90,6 @@ void SetCL(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x62, Data);
}
/*
Minimum row precharge time, Trp for DDR1/DDR2
D0F3Rx64[3:2] for Trp 2T~5T
@ -105,15 +103,14 @@ void SetTrp(DRAM_SYS_ATTR * DramAttr)
u16 Max, Tmp;
u8 Socket;
/*get the max Trp value from SPD data
SPD Byte27, Bit7:2->1ns~63ns, Bit1:0->0ns, 0.25ns, 0.50ns, 0.75ns */
Max = 0;
for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
if (DramAttr->DimmInfo[Socket].bPresence) {
Tmp =
(u16) (DramAttr->DimmInfo[Socket].
SPDDataBuf[SPD_SDRAM_TRP]);
(u16) (DramAttr->
DimmInfo[Socket].SPDDataBuf[SPD_SDRAM_TRP]);
if (Tmp > Max)
Max = Tmp;
}
@ -144,7 +141,6 @@ void SetTrp(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x62, Data);
}
/*
Minimum RAS to CAS dely,Trcd for DDR1/DDR2
D0F3Rx64[7:6] for Trcd
@ -158,15 +154,14 @@ void SetTrcd(DRAM_SYS_ATTR * DramAttr)
u16 Max, Tmp;
u8 Socket;
/*get the max Trcd value from SPD data
SPD Byte29, Bit7:2->1ns~63ns, Bit1:0->0ns, 0.25ns, 0.50ns, 0.75ns */
Max = 0;
for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
if (DramAttr->DimmInfo[Socket].bPresence) {
Tmp =
(u16) (DramAttr->DimmInfo[Socket].
SPDDataBuf[SPD_SDRAM_TRCD]);
(u16) (DramAttr->
DimmInfo[Socket].SPDDataBuf[SPD_SDRAM_TRCD]);
if (Tmp > Max)
Max = Tmp;
}
@ -204,24 +199,21 @@ void SetTras(DRAM_SYS_ATTR * DramAttr)
u16 Max, Tmp;
u8 Socket;
/*get the max Tras value from SPD data
SPD byte30: bit0:7 1ns~255ns */
Max = 0;
for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
if (DramAttr->DimmInfo[Socket].bPresence) {
Tmp =
(u16) (DramAttr->DimmInfo[Socket].
SPDDataBuf[SPD_SDRAM_TRAS]);
(u16) (DramAttr->
DimmInfo[Socket].SPDDataBuf[SPD_SDRAM_TRAS]);
if (Tmp > Max)
Max = Tmp;
}
}
/*Calculate clock,value range 5T-20T */
Tmp =
(u16) ((Max * 100 + DramAttr->DramCyc -
1) / (DramAttr->DramCyc));
Tmp = (u16) ((Max * 100 + DramAttr->DramCyc - 1) / (DramAttr->DramCyc));
PRINT_DEBUG_MEM("Tras =");
PRINT_DEBUG_MEM_HEX16(Tmp);
PRINT_DEBUG_MEM("\r");
@ -259,12 +251,13 @@ void SetTrfc(DRAM_SYS_ATTR * DramAttr)
for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
if (DramAttr->DimmInfo[Socket].bPresence) {
Tmp =
(u32) (DramAttr->DimmInfo[Socket].
SPDDataBuf[SPD_SDRAM_TRFC]) * 100;
(u32) (DramAttr->
DimmInfo[Socket].SPDDataBuf[SPD_SDRAM_TRFC])
* 100;
/*only DDR2 need to add byte 40 bit[7:4] */
Byte40 =
(DramAttr->DimmInfo[Socket].
SPDDataBuf[SPD_SDRAM_TRFC2]);
(DramAttr->
DimmInfo[Socket].SPDDataBuf[SPD_SDRAM_TRFC2]);
/*if bit0 = 1, byte42(RFC)+256ns, SPD spec JEDEC standard No.21.c */
if (Byte40 & 0x01)
Tmp += (256 * 100);
@ -313,7 +306,6 @@ void SetTrfc(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x61, Data);
}
/*
Minimum row active to row active delay: Trrd for DDR1/DDR2
D0F3Rx61[7:6]:Trrd 00->2T, 01->3T, 10->4T, 11->5T
@ -327,15 +319,14 @@ void SetTrrd(DRAM_SYS_ATTR * DramAttr)
u16 Max, Tmp;
u8 Socket;
/*get the max Trrd value from SPD data
SPD Byte28, Bit7:2->1ns~63ns, Bit1:0->0ns, 0.25ns, 0.50ns, 0.75ns */
Max = 0;
for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
if (DramAttr->DimmInfo[Socket].bPresence) {
Tmp =
(u16) (DramAttr->DimmInfo[Socket].
SPDDataBuf[SPD_SDRAM_TRRD]);
(u16) (DramAttr->
DimmInfo[Socket].SPDDataBuf[SPD_SDRAM_TRRD]);
if (Tmp > Max)
Max = Tmp;
}
@ -361,7 +352,6 @@ void SetTrrd(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x61, Data);
}
/*
Write recovery time: Twr for DDR1/DDR2
Device 0 Function 3:REG63[7:5]:Twr 00->2T 01->3T 10->4T 11->5T
@ -381,8 +371,8 @@ void SetTwr(DRAM_SYS_ATTR * DramAttr)
for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
if (DramAttr->DimmInfo[Socket].bPresence) {
Tmp =
(u16) (DramAttr->DimmInfo[Socket].
SPDDataBuf[SPD_SDRAM_TWR]);
(u16) (DramAttr->
DimmInfo[Socket].SPDDataBuf[SPD_SDRAM_TWR]);
if (Tmp > Max)
Max = Tmp;
}
@ -405,7 +395,6 @@ void SetTwr(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x63, Data);
}
/*
Internal write to read command delay: Twtr for DDR1/DDR2
Device 0 Function 3:REG63[1,0]:Twtr DDR: 1T or 2T; DDR2 2T or 3T
@ -425,8 +414,8 @@ void SetTwtr(DRAM_SYS_ATTR * DramAttr)
for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
if (DramAttr->DimmInfo[Socket].bPresence) {
Tmp =
(u16) (DramAttr->DimmInfo[Socket].
SPDDataBuf[SPD_SDRAM_TWTR]);
(u16) (DramAttr->
DimmInfo[Socket].SPDDataBuf[SPD_SDRAM_TWTR]);
if (Tmp > Max)
Max = Tmp;
}
@ -448,7 +437,6 @@ void SetTwtr(DRAM_SYS_ATTR * DramAttr)
pci_write_config8(MEMCTRL, 0x63, Data);
}
/*
Internal read to precharge command delay, Trtp for DDR1/DDR2
Device 0 Function 3:REG63[3]:Trtp 2T or 3T
@ -462,15 +450,14 @@ void SetTrtp(DRAM_SYS_ATTR * DramAttr)
u16 Max, Tmp;
u8 Socket;
/*get the max Trtp value from SPD data
SPD Byte38, Bit7:2->1ns~63ns, Bit1:0->0ns, 0.25ns, 0.50ns, 0.75ns */
Max = 0;
for (Socket = 0; Socket < MAX_SOCKETS; Socket++) {
if (DramAttr->DimmInfo[Socket].bPresence) {
Tmp =
(u16) (DramAttr->DimmInfo[Socket].
SPDDataBuf[SPD_SDRAM_TRTP]);
(u16) (DramAttr->
DimmInfo[Socket].SPDDataBuf[SPD_SDRAM_TRTP]);
if (Tmp > Max)
Max = Tmp;
}

1
src/northbridge/via/vx800/translator_ddr2_init.c
View File

@ -24,7 +24,6 @@
#define TRUE 1
#define FALSE 0
typedef int8_t INT8;
typedef unsigned long uintn_t;
typedef uintn_t UINTN;

19
src/northbridge/via/vx800/uma_ram_setting.c
View File

@ -32,7 +32,6 @@ typedef struct __UMA_RAM_tag {
#define UMARAM_8M 1
#define UMARAM_0M 0
#define FB_512M 0
#define FB_256M 0x40
#define FB_128M 0x60
@ -77,7 +76,6 @@ void SetUMARam(void)
SLD1F0Val = 0;
VgaPortVal = 0;
ByteVal = pci_read_config8(MEMCTRL, 0xa1);
ByteVal |= 0x80;
pci_write_config8(MEMCTRL, 0xa1, ByteVal);
@ -134,7 +132,6 @@ void SetUMARam(void)
ByteVal = (ByteVal & 0x8f) | (SLD0F3Val << 4);
pci_write_config8(MEMCTRL, 0xa1, ByteVal);
// vga_dev = dev_find_device(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855_VGA, 0);
//RxB2 may be for S.L. and RxB1 may be for L. L.
@ -142,7 +139,6 @@ void SetUMARam(void)
ByteVal = SLD1F0Val;
pci_write_config8(vga_dev, 0xb2, ByteVal);
//set M1 size
//ByteVal=pci_read_config8(MEMCTRL, 0xa3);
//ByteVal = 0x02;
@ -150,16 +146,10 @@ void SetUMARam(void)
PRINT_DEBUG_MEM("UMA setting - 3\n");
//Enable p2p IO/mem
ByteVal = 0x07;
pci_write_config8(vga_dev, 0x04, ByteVal);
//must set SL and MMIO base, or else when enable GFX memory space, system will hang
//set S.L base
Tmp = pci_read_config32(vga_dev, 0x10);
@ -177,27 +167,23 @@ void SetUMARam(void)
Tmp = VIACONFIG_VGA_PCI_14;
pci_write_config32(vga_dev, 0x14, Tmp);
//enable direct cpu frame buffer access
i = pci_rawread_config8(PCI_RAWDEV(0, 0, 3), 0xa1);
i = (i & 0xf0) | (VIACONFIG_VGA_PCI_10 >> 28);
pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xa1, i);
pci_rawwrite_config8(PCI_RAWDEV(0, 0, 3), 0xa0, 0x01);
//enable GFx memory space access control for S.L and mmio
ByteVal = pci_read_config8(d0f0_dev, 0xD4);
ByteVal |= 0x03;
//ByteVal |= 0x01;
pci_write_config8(d0f0_dev, 0xD4, ByteVal);
//enable Base VGA 16 Bits Decode
ByteVal = pci_read_config8(d0f0_dev, 0xfe);
ByteVal |= 0x10;
pci_write_config8(d0f0_dev, 0xfe, ByteVal);
//disable CHB L.L
//set VGA memory selection
ByteVal = pci_read_config8(vga_dev, 0xb0);
@ -233,7 +219,6 @@ void SetUMARam(void)
// ByteVal |= 0x01;
// outb(ByteVal,0x03C2);
#if 1 //bios porting guide has no this two defination: 3d on 3d4/3d5 and 39 on 3c4/3c5
//set frequence 0x3D5.3d[7:4]
outb(0x3d, 0x03d4);
@ -304,7 +289,6 @@ void SetUMARam(void)
//calculate SL Base Address
SLBase = (RamSize << 26) - (UmaSize << 20);
outb(0x6D, 0x03c4);
//SL Base[28:21]
outb((u8) ((SLBase >> 21) & 0xFF), 0x03c5);
@ -339,7 +323,6 @@ void SetUMARam(void)
ByteVal = (ByteVal & 0xE5) | 0x1A;
outb(ByteVal, 0x03c5);
outb(0xf3, 0x03d4);
ByteVal = inb(0x03d5);
ByteVal = (ByteVal & 0xE5) | 0x1A;
@ -381,7 +364,6 @@ void SetUMARam(void)
0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D, 0x1D,
};
u8 table3c0space[0xc0] = {
0x11, 0x00, 0x10, 0x01, 0x26, 0x3D, 0xFF, 0x00,
0x10, 0x3F, 0x00, 0x00, 0x2F, 0x00, 0x22, 0x00,
@ -415,7 +397,6 @@ void SetUMARam(void)
outb(table3c0space[i], 0x03c0 + i);
}
for (i = 0; i < 0x70; i++) {
outb(i, 0x03c4);
outb(table3c43c5[i], 0x03c5);

5
src/northbridge/via/vx800/vga.c
View File

@ -84,7 +84,6 @@ static void vga_init(device_t dev)
//*/
printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__);
#if 1
printk_debug("INSTALL REAL-MODE IDT\n");
setup_realmode_idt();
@ -126,12 +125,11 @@ static void vga_init(device_t dev)
static void vga_read_resources(device_t dev)
{
dev->rom_address = (void *) (0xffffffff - FULL_ROM_SIZE + 1);
dev->rom_address = (void *)(0xffffffff - FULL_ROM_SIZE + 1);
dev->on_mainboard = 1;
pci_dev_read_resources(dev);
}
static struct device_operations vga_operations = {
.read_resources = vga_read_resources,
.set_resources = pci_dev_set_resources,
@ -140,7 +138,6 @@ static struct device_operations vga_operations = {
.ops_pci = 0,
};
static const struct pci_driver vga_driver __pci_driver = {
.ops = &vga_operations,
.vendor = PCI_VENDOR_ID_VIA,

52
src/northbridge/via/vx800/vgabios.c
View File

@ -7,7 +7,6 @@
#include <string.h>
#include "vgachip.h"
/* vgabios.c. Derived from: */
/*------------------------------------------------------------ -*- C -*-
@ -306,7 +305,7 @@ void do_vgabios(void)
/* clear vga bios data area */
for (i = 0x400; i < 0x500; i++) {
*(unsigned char *) i = 0;
*(unsigned char *)i = 0;
}
dev = dev_find_class(PCI_CLASS_DISPLAY_VGA << 8, 0);
@ -315,8 +314,7 @@ void do_vgabios(void)
printk_debug("NO VGA FOUND\n");
return;
}
printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor,
dev->device);
printk_debug("found VGA: vid=%x, did=%x\n", dev->vendor, dev->device);
/* declare rom address here - keep any config data out of the way
* of core LXB stuff */
@ -324,28 +322,25 @@ void do_vgabios(void)
rom = 0xffffffff - FULL_ROM_SIZE + 1;
pci_write_config32(dev, PCI_ROM_ADDRESS, rom | 1);
printk_debug("rom base: %x\n", rom);
buf = (unsigned char *) rom;
buf = (unsigned char *)rom;
printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__);
if ((buf[0] == 0x55) && (buf[1] == 0xaa)) {
memcpy((void *) 0xc0000, buf, size);
memcpy((void *)0xc0000, buf, size);
printk_emerg("file '%s', line %d\n\n", __FILE__, __LINE__);
write_protect_vgabios(); // in northbridge
// check signature again
buf = (unsigned char *) 0xc0000;
buf = (unsigned char *)0xc0000;
if (buf[0] == 0x55 && buf[1] == 0xAA) {
busdevfn =
(dev->bus->secondary << 8) | dev->path.pci.
devfn;
(dev->bus->secondary << 8) | dev->path.pci.devfn;
printk_debug("bus/devfn = %#x\n", busdevfn);
real_mode_switch_call_vga(busdevfn);
} else
printk_debug
("Failed to copy VGA BIOS to 0xc0000\n");
printk_debug("Failed to copy VGA BIOS to 0xc0000\n");
} else
printk_debug("BAD SIGNATURE 0x%x 0x%x\n", buf[0], buf[1]);
@ -354,7 +349,6 @@ void do_vgabios(void)
pci_write_config32(dev, PCI_ROM_ADDRESS, 0);
}
// we had hoped to avoid this.
// this is a stub IDT only. It's main purpose is to ignore calls
// to the BIOS.
@ -399,8 +393,7 @@ void debughandler(void)
" loop dbh1 \n"
" popw %cx \n"
" iret \n"
"end_debughandle: \n"
".code32 \n");
"end_debughandle: \n" ".code32 \n");
}
// Calling conventions. The first C function is called with this stuff
@ -492,8 +485,7 @@ enum {
int pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
unsigned long *pesp, unsigned long *pebx, unsigned long *pedx,
unsigned long *pecx, unsigned long *peax,
unsigned long *pflags);
unsigned long *pecx, unsigned long *peax, unsigned long *pflags);
int handleint21(unsigned long *pedi, unsigned long *pesi,
unsigned long *pebp, unsigned long *pesp,
@ -536,8 +528,7 @@ int biosint(unsigned long intnumber,
if (esp < 0x1000) {
printk_debug("Stack contents: ");
while (esp < 0x1000) {
printk_debug("0x%04x ",
*(unsigned short *) esp);
printk_debug("0x%04x ", *(unsigned short *)esp);
esp += 2;
}
printk_debug("\n");
@ -573,14 +564,13 @@ int biosint(unsigned long intnumber,
return ret;
}
void setup_realmode_idt(void)
{
extern unsigned char idthandle, end_idthandle;
extern unsigned char debughandle, end_debughandle;
int i;
struct realidt *idts = (struct realidt *) 0;
struct realidt *idts = (struct realidt *)0;
int codesize = &end_idthandle - &idthandle;
unsigned char *intbyte, *codeptr;
@ -595,8 +585,8 @@ void setup_realmode_idt(void)
// and get it that way. But that's really disgusting.
for (i = 0; i < 256; i++) {
idts[i].cs = 0;
codeptr = (char *) 4096 + i * codesize;
idts[i].offset = (unsigned) codeptr;
codeptr = (char *)4096 + i * codesize;
idts[i].offset = (unsigned)codeptr;
memcpy(codeptr, &idthandle, codesize);
intbyte = codeptr + 3;
*intbyte = i;
@ -608,7 +598,7 @@ void setup_realmode_idt(void)
// int10.
// calling convention here is the same as INTs, we can reuse
// the int entry code.
codeptr = (char *) 0xff065;
codeptr = (char *)0xff065;
memcpy(codeptr, &idthandle, codesize);
intbyte = codeptr + 3;
*intbyte = 0x42; /* int42 is the relocated int10 */
@ -617,7 +607,7 @@ void setup_realmode_idt(void)
VBIOS will call f000:f859 instead of sending int15.
calling convertion here is the same as INTs, we can reuse the int entry code.
*/
codeptr = (char *) 0xff859;
codeptr = (char *)0xff859;
memcpy(codeptr, &idthandle, codesize);
intbyte = codeptr + 3;
*intbyte = 0x15;
@ -628,11 +618,8 @@ void setup_realmode_idt(void)
idts[1].offset = 16384;
memcpy(16384, &debughandle, &end_debughandle - &debughandle);
}
enum {
CHECK = 0xb001,
FINDDEV = 0xb102,
@ -665,7 +652,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
unsigned long ecx = *pecx;
unsigned long eax = *peax;
unsigned long flags = *pflags;
unsigned short func = (unsigned short) eax;
unsigned short func = (unsigned short)eax;
int retval = 0;
unsigned short devid, vendorid, devfn;
short devindex; /* Use short to get rid of garbage in upper half of 32-bit register */
@ -684,8 +671,7 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
vendorid = *pedx;
devindex = *pesi;
dev = 0;
while ((dev =
dev_find_device(vendorid, devid, dev))) {
while ((dev = dev_find_device(vendorid, devid, dev))) {
if (devindex <= 0)
break;
devindex--;
@ -775,7 +761,6 @@ pcibios(unsigned long *pedi, unsigned long *pesi, unsigned long *pebp,
return retval;
}
/* return value of int0x15(int21)
AH AL Completion status
?? 5Fh Function call supported
@ -785,8 +770,7 @@ AH AL Completion status
*/
int handleint21(unsigned long *edi, unsigned long *esi, unsigned long *ebp,
unsigned long *esp, unsigned long *ebx, unsigned long *edx,
unsigned long *ecx, unsigned long *eax,
unsigned long *flags)
unsigned long *ecx, unsigned long *eax, unsigned long *flags)
{
int res = -1;
switch (*eax & 0xffff) {

2
src/northbridge/via/vx800/vgachip.h
View File

@ -31,4 +31,4 @@ void do_vgabios(void);
void setup_realmode_idt(void);
void write_protect_vgabios(void);
#endif /* _PC80_VGABIOS */
#endif /* _PC80_VGABIOS */

20
src/northbridge/via/vx800/vx800.h
View File

@ -20,13 +20,14 @@
#ifndef VX800_H
#define VX800_H 1
#ifndef __ROMCC__
static void vx800_noop(){}
static void vx800_noop()
{
}
#endif
#define REV_B0 0x10
#define REV_B1 0x11
#define REV_B2 0x12
#define REV_B2 0x12
#define REV_B3 0x13
#define REV_B4 0x14
#define REV_B2 0xB4
@ -63,9 +64,6 @@ static void vx800_noop(){}
#define RAM_COMMAND_MRS 0x3
#define RAM_COMMAND_CBR 0x4
/* IDE specific bits */
#define IDE_MODE_REG 0x09
#define IDE0_NATIVE_MODE (1 << 0)
@ -77,7 +75,6 @@ static void vx800_noop(){}
#define IDE1_DATA_ADDR 0x170
#define IDE1_CONTROL_ADDR 0x370
/* By Award default, Via default is 0xCC0 */
#define BUS_MASTER_ADDR 0xfe00
@ -85,14 +82,11 @@ static void vx800_noop(){}
#define ENABLE_IDE0 (1 << 0)
#define ENABLE_IDE1 (1 << 1)
#define VX800_ACPI_IO_BASE 0x0400
#define NB_APIC_REG 0,0,5,
#define NB_PXPTRF_REG NB_APIC_REG
#define NB_MSGC_REG NB_APIC_REG
#define NB_PXPTRF_REG NB_APIC_REG
#define NB_MSGC_REG NB_APIC_REG
#define NB_HOST_REG 0,0,2,
#define NB_P6IF_REG NB_HOST_REG
@ -103,7 +97,6 @@ static void vx800_noop(){}
#define NB_D3F0_REG 0,3, 0,
#define NB_D3F1_REG 0,3, 1,
#define SB_LPC_REG 0,0x11,0,
#define SB_VLINK_REG 0,0x11,7,
#define SB_SATA_REG 0,0xf, 0,
@ -114,7 +107,6 @@ static void vx800_noop(){}
#define SB_USB2_REG 0,0x10, 2,
#define SB_EHCI_REG 0,0x10, 4,
#define VX800SB_APIC_ID 0x4
#define VX800SB_APIC_BASE 0xfec00000ULL
#define VX800SB_APIC_DATA_OFFSET 0x10

19
src/northbridge/via/vx800/vx800_early_serial.c
View File

@ -27,48 +27,46 @@
#define SIO_BASE 0x3f0
#define SIO_DATA SIO_BASE+1
static void vx800_writesuper(uint8_t reg, uint8_t val)
static void vx800_writesuper(uint8_t reg, uint8_t val)
{
outb(reg, SIO_BASE);
outb(val, SIO_DATA);
}
static void vx800_writepnpaddr(uint8_t val)
static void vx800_writepnpaddr(uint8_t val)
{
outb(val, 0x2e);
outb(val, 0xeb);
}
static void vx800_writepnpdata(uint8_t val)
static void vx800_writepnpdata(uint8_t val)
{
outb(val, 0x2f);
outb(val, 0xeb);
}
static void vx800_writesiobyte(uint16_t reg, uint8_t val)
static void vx800_writesiobyte(uint16_t reg, uint8_t val)
{
outb(val, reg);
}
static void vx800_writesioword(uint16_t reg, uint16_t val)
static void vx800_writesioword(uint16_t reg, uint16_t val)
{
outw(val, reg);
}
/* regs we use: 85, and the southbridge devfn is defined by the
mainboard
*/
static void enable_vx800_serial(void)
static void enable_vx800_serial(void)
{
outb(6, 0x80);
outb(0x03, 0x22);
//pci_write_config8(PCI_DEV(0,17,0),0xb4,0x7e);
//pci_write_config8(PCI_DEV(0,17,0),0xb0,0x10);
// turn on pnp
vx800_writepnpaddr(0x87);
vx800_writepnpaddr(0x87);
@ -96,7 +94,7 @@ static void enable_vx800_serial(void)
// Set 115 kb
vx800_writesioword(0x3f8, 1);
// Set 9.6 kb
// WRITESIOWORD(0x3f8, 12)
// WRITESIOWORD(0x3f8, 12)
// now set no parity, one stop, 8 bits
vx800_writesiobyte(0x3fb, 3);
// now turn on RTS, DRT
@ -107,4 +105,3 @@ static void enable_vx800_serial(void)
vx800_writesiobyte(0x3f8, 48);
outb(7, 0x80);
}

105
src/northbridge/via/vx800/vx800_early_smbus.c
View File

@ -17,10 +17,10 @@
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <device/pci_ids.h>
#include "vx800.h"
#define SMBUS_IO_BASE 0x0500 //from award bios
#define PMIO_BASE VX800_ACPI_IO_BASE //might as well set this while we're here
#include <device/pci_ids.h>
#include "vx800.h"
#define SMBUS_IO_BASE 0x0500 //from award bios
#define PMIO_BASE VX800_ACPI_IO_BASE //might as well set this while we're here
#define SMBHSTSTAT SMBUS_IO_BASE + 0x0
#define SMBSLVSTAT SMBUS_IO_BASE + 0x1
@ -64,10 +64,11 @@
/* Internal functions */
static void smbus_print_error(unsigned char host_status_register, int loops)
{
// print_err("some i2c error\r\n");
// print_err("some i2c error\r\n");
/* Check if there actually was an error */
if ( host_status_register == 0x00 || host_status_register == 0x40 ||
host_status_register == 0x42) return;
if (host_status_register == 0x00 || host_status_register == 0x40 ||
host_status_register == 0x42)
return;
print_err("smbus_error: ");
print_err_hex8(host_status_register);
print_err("\r\n");
@ -98,7 +99,7 @@ static void smbus_wait_until_ready(void)
loops = 0;
/* Yes, this is a mess, but it's the easiest way to do it */
while(((inb(SMBHSTSTAT) & 1) == 1) && (loops <= SMBUS_TIMEOUT)) {
while (((inb(SMBHSTSTAT) & 1) == 1) && (loops <= SMBUS_TIMEOUT)) {
SMBUS_DELAY();
++loops;
}
@ -124,37 +125,37 @@ static unsigned int set_ics_data(unsigned char dev, int data, char len)
inb(SMBHSTCTL);
/* fill blocktransfer array */
if (dev=0xd2) {
if (dev = 0xd2) {
//char d2_data[] = {0x0d,0x00,0x3f,0xcd,0x7f,0xbf,0x1a,0x2a,0x01,0x0f,0x0b,0x00,0x8d,0x9b};
outb(0x0d,SMBBLKDAT);
outb(0x00,SMBBLKDAT);
outb(0x3f,SMBBLKDAT);
outb(0xcd,SMBBLKDAT);
outb(0x7f,SMBBLKDAT);
outb(0xbf,SMBBLKDAT);
outb(0x1a,SMBBLKDAT);
outb(0x2a,SMBBLKDAT);
outb(0x01,SMBBLKDAT);
outb(0x0f,SMBBLKDAT);
outb(0x0b,SMBBLKDAT);
outb(0x80,SMBBLKDAT);
outb(0x8d,SMBBLKDAT);
outb(0x9b,SMBBLKDAT);
outb(0x0d, SMBBLKDAT);
outb(0x00, SMBBLKDAT);
outb(0x3f, SMBBLKDAT);
outb(0xcd, SMBBLKDAT);
outb(0x7f, SMBBLKDAT);
outb(0xbf, SMBBLKDAT);
outb(0x1a, SMBBLKDAT);
outb(0x2a, SMBBLKDAT);
outb(0x01, SMBBLKDAT);
outb(0x0f, SMBBLKDAT);
outb(0x0b, SMBBLKDAT);
outb(0x80, SMBBLKDAT);
outb(0x8d, SMBBLKDAT);
outb(0x9b, SMBBLKDAT);
} else {
//char d4_data[] = {0x08,0xff,0x3f,0x00,0x00,0xff,0xff,0xff,0xff};
outb(0x08,SMBBLKDAT);
outb(0xff,SMBBLKDAT);
outb(0x3f,SMBBLKDAT);
outb(0x00,SMBBLKDAT);
outb(0x00,SMBBLKDAT);
outb(0xff,SMBBLKDAT);
outb(0xff,SMBBLKDAT);
outb(0xff,SMBBLKDAT);
outb(0xff,SMBBLKDAT);
outb(0x08, SMBBLKDAT);
outb(0xff, SMBBLKDAT);
outb(0x3f, SMBBLKDAT);
outb(0x00, SMBBLKDAT);
outb(0x00, SMBBLKDAT);
outb(0xff, SMBBLKDAT);
outb(0xff, SMBBLKDAT);
outb(0xff, SMBBLKDAT);
outb(0xff, SMBBLKDAT);
}
//for (i=0; i < len; i++)
// outb(data[i],SMBBLKDAT);
// outb(data[i],SMBBLKDAT);
outb(dev, SMBXMITADD);
outb(0, SMBHSTCMD);
@ -184,7 +185,7 @@ static unsigned int get_spd_data(unsigned int dimm, unsigned int offset)
dimm &= 0x0E;
dimm |= 0xA0;
outb(dimm|0x1, SMBXMITADD);
outb(dimm | 0x1, SMBXMITADD);
outb(offset, SMBHSTCMD);
outb(0x48, SMBHSTCTL);
@ -201,9 +202,12 @@ static void enable_smbus(void)
{
device_t dev;
dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855_LPC), 0);
dev =
pci_locate_device(PCI_ID
(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VX855_LPC),
0);
if (dev == PCI_DEV_INVALID) {
if (dev == PCI_DEV_INVALID) {
/* This won't display text if enable_smbus() is before serial init */
die("Power Managment Controller not found\r\n");
}
@ -217,21 +221,21 @@ static void enable_smbus(void)
/* Set to Award value */
pci_write_config8(dev, 0xd2, 0x05);
/* Make it work for I/O ...*/
/* Make it work for I/O ... */
pci_write_config16(dev, 0x04, 0x0003);
/*
coreboot hangs at this two lines after os reboot(this even happen after I change os
reboot to cold reboot, this also interfere S3 wakeup)*/
/*
coreboot hangs at this two lines after os reboot(this even happen after I change os
reboot to cold reboot, this also interfere S3 wakeup) */
/* Setup clock chips */
//set_ics_data(0xd2, 0, 14);
//set_ics_data(0xd4, 0, 9);
smbus_reset();
/* clear host data port */
outb(0x00, SMBHSTDAT0);
SMBUS_DELAY();
smbus_wait_until_ready();
smbus_wait_until_ready();
}
/**
@ -266,13 +270,15 @@ void smbus_fixup(const struct mem_controller *ctrl)
* VT8237R has only been seen on DDR and DDR2 based systems, so far.
*/
for (i = 0; (i < SMBUS_TIMEOUT && ((result < SPD_MEMORY_TYPE_SDRAM) ||
(result > SPD_MEMORY_TYPE_SDRAM_DDR3))); i++) {
(result >
SPD_MEMORY_TYPE_SDRAM_DDR3)));
i++) {
if (current_slot > ram_slots)
current_slot = 0;
result = get_spd_data(ctrl->channel0[current_slot],
SPD_MEMORY_TYPE);
SPD_MEMORY_TYPE);
current_slot++;
PRINT_DEBUG(".");
}
@ -290,24 +296,21 @@ static void dump_spd_data(void)
int dimm, offset, regs;
unsigned int val;
for(dimm = 0; dimm < 8; dimm++)
{
for (dimm = 0; dimm < 8; dimm++) {
print_debug("SPD Data for DIMM ");
print_debug_hex8(dimm);
print_debug("\r\n");
val = get_spd_data(dimm, 0);
if(val == 0xff)
{
if (val == 0xff) {
regs = 256;
} else if(val == 0x80) {
} else if (val == 0x80) {
regs = 128;
} else {
print_debug("No DIMM present\r\n");
regs = 0;
}
for(offset = 0; offset < regs; offset++)
{
for (offset = 0; offset < regs; offset++) {
print_debug(" Offset ");
print_debug_hex8(offset);
print_debug(" = 0x");

208
src/northbridge/via/vx800/vx800_ide.c
View File

@ -27,75 +27,141 @@
#include "vx800.h"
static const idedevicepcitable[16 * 12] = {
//
/*0x02, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0xA8, 0xA8, 0xF0, 0x00, 0x00, 0xB6,
0x00, 0x00, 0x01, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4,
0x00, 0xC2, 0xF9, 0x01, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
*/
//
0x02, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x99, 0x20, 0xf0, 0x00, 0x00, 0x20,
0x00, 0x00, 0x17, 0xF1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4,
0x00, 0xc2, 0x09, 0x01, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
//legacybios xp pci value
/*0x02, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0xa8, 0x20, 0x00, 0x00, 0x00, 0xb6,
0x00, 0x00, 0x16, 0xF1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4,
0x00, 0x02, 0x09, 0x00, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
*/
//rom legacybios on cn_8562b
/*
0x03, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x99, 0x20, 0x60, 0x00, 0x00, 0x20,
0x00, 0x00, 0x1E, 0xF1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4,
0x00, 0x02, 0x09, 0x01, 0x18, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
*/
//from egacybios on c7_8562b
/*0x03, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00, 0x00, 0x00, 0x5E, 0x20, 0x60, 0x00, 0x00, 0xB6,
0x00, 0x00, 0x1E, 0xF1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4,
0x00, 0x02, 0x09, 0x01, 0x18, 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, */
/*
0x02, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00,
0x00, 0x00, 0xA8, 0xA8, 0xF0, 0x00, 0x00, 0xB6,
0x00, 0x00, 0x01, 0x21, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4,
0x00, 0xC2, 0xF9, 0x01, 0x10, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
*/
0x02, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00,
0x00, 0x00, 0x99, 0x20, 0xf0, 0x00, 0x00, 0x20,
0x00, 0x00, 0x17, 0xF1, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4,
0x00, 0xc2, 0x09, 0x01, 0x10, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
/* Legacy BIOS XP PCI value */
/*
0x02, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00,
0x00, 0x00, 0xa8, 0x20, 0x00, 0x00, 0x00, 0xb6,
0x00, 0x00, 0x16, 0xF1, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4,
0x00, 0x02, 0x09, 0x00, 0x18, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x34, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
*/
/* ROM legacy BIOS on cn_8562b */
/*
0x03, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00,
0x00, 0x00, 0x99, 0x20, 0x60, 0x00, 0x00, 0x20,
0x00, 0x00, 0x1E, 0xF1, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4,
0x00, 0x02, 0x09, 0x01, 0x18, 0x0C, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x34, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
*/
/* From legacy BIOS on c7_8562b */
/*
0x03, 0x00, 0x00, 0x00, 0x00, 0x82, 0x00, 0x00,
0x00, 0x00, 0x5E, 0x20, 0x60, 0x00, 0x00, 0xB6,
0x00, 0x00, 0x1E, 0xF1, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x01, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x01, 0x09, 0xC4, 0x06, 0x11, 0x09, 0xC4,
0x00, 0x02, 0x09, 0x01, 0x18, 0x0C, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x34, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x01, 0x24, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
*/
};
static void ide_init(struct device *dev)
@ -129,10 +195,8 @@ static void ide_init(struct device *dev)
pci_write_config8(dev, PCI_INTERRUPT_LINE, 0xff);
#if 0
struct southbridge_via_vt8237r_config *sb =
(struct southbridge_via_vt8237r_config *) dev->chip_info;
(struct southbridge_via_vt8237r_config *)dev->chip_info;
u8 enables;
u32 cablesel;

111
src/northbridge/via/vx800/vx800_lpc.c
View File

@ -30,28 +30,28 @@
#include "vx800.h"
#include "chip.h"
static const unsigned char pciIrqs[4] = {0xa, 0x9, 0xb, 0xa};
static const unsigned char pciIrqs[4] = { 0xa, 0x9, 0xb, 0xa };
static const unsigned char vgaPins[4] = { 'A', 'B', 'C', 'D' };//only INTA
static const unsigned char vgaPins[4] = { 'A', 'B', 'C', 'D' }; //only INTA
static const unsigned char slotPins[4] = { 'A', 'A', 'A', 'A'};//all 4
static const unsigned char slotPins[4] = { 'A', 'A', 'A', 'A' }; //all 4
static const unsigned char usbdevicePins[4] = { 'A', 'B', 'C', 'D' };//only INTA
static const unsigned char sdioPins[4] = { 'A', 'B', 'C', 'D' };//only INTA
static const unsigned char sd_ms_ctrl_Pins[4] = { 'B', 'C', 'D', 'A' };//only INTA
static const unsigned char ce_ata_nf_ctrl_Pins[4] = { 'C', 'C', 'D', 'A' };//only INTA
static const unsigned char idePins[4] = { 'B', 'C', 'D', 'A' };//only INTA
static const unsigned char usbdevicePins[4] = { 'A', 'B', 'C', 'D' }; //only INTA
static const unsigned char sdioPins[4] = { 'A', 'B', 'C', 'D' }; //only INTA
static const unsigned char sd_ms_ctrl_Pins[4] = { 'B', 'C', 'D', 'A' }; //only INTA
static const unsigned char ce_ata_nf_ctrl_Pins[4] = { 'C', 'C', 'D', 'A' }; //only INTA
static const unsigned char idePins[4] = { 'B', 'C', 'D', 'A' }; //only INTA
static const unsigned char usbPins[4] = { 'A', 'B', 'C', 'D' };//all 4
static const unsigned char usbPins[4] = { 'A', 'B', 'C', 'D' }; //all 4
static const unsigned char hdacaudioPins[4] = { 'B', 'C', 'D', 'A' };//only INTA
static const unsigned char hdacaudioPins[4] = { 'B', 'C', 'D', 'A' }; //only INTA
static unsigned char *pin_to_irq(const unsigned char *pin)
{
static unsigned char Irqs[4];
int i;
for (i = 0 ; i < 4 ; i++)
Irqs[i] = pciIrqs[ pin[i] - 'A' ];
for (i = 0; i < 4; i++)
Irqs[i] = pciIrqs[pin[i] - 'A'];
return Irqs;
}
@ -62,7 +62,7 @@ static void pci_routing_fixup(struct device *dev)
/* set up PCI IRQ routing */
pci_write_config8(dev, 0x55, pciIrqs[0] << 4);
pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4) );
pci_write_config8(dev, 0x56, pciIrqs[1] | (pciIrqs[2] << 4));
pci_write_config8(dev, 0x57, pciIrqs[3] << 4);
/* VGA */
@ -95,7 +95,7 @@ static void pci_routing_fixup(struct device *dev)
/* Standard usb components */
printk_info("setting usb1-2\n");
// pci_assign_irqs(0, 0x10, pin_to_irq(usbPins));
// pci_assign_irqs(0, 0x10, pin_to_irq(usbPins));
/* sound hardware */
printk_info("setting hdac audio\n");
@ -111,27 +111,27 @@ void setup_pm(device_t dev)
pci_write_config8(dev, 0x80, 0x20);
/* Set ACPI base address to IO VX800_ACPI_IO_BASE */
pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE|1);
pci_write_config16(dev, 0x88, VX800_ACPI_IO_BASE | 1);
/* set ACPI irq to 9 */
pci_write_config8(dev, 0x82, 0x49);
/* Primary interupt channel, define wake events 0=IRQ0 15=IRQ15 1=en. */
// pci_write_config16(dev, 0x84, 0x30f2);
pci_write_config16(dev, 0x84, 0x609a); // 0x609a??
// pci_write_config16(dev, 0x84, 0x30f2);
pci_write_config16(dev, 0x84, 0x609a); // 0x609a??
/* SMI output level to low, 7.5us throttle clock */
pci_write_config8(dev, 0x8d, 0x18);
/* GP Timer Control 1s */
pci_write_config8(dev, 0x93, 0x88);
/* Power Well */
pci_write_config8(dev, 0x94, 0x20); // 0x20??
/* 7 = stp to sust delay 1msec
* 6 = SUSST# Deasserted Before PWRGD for STD
*/
* 6 = SUSST# Deasserted Before PWRGD for STD
*/
pci_write_config8(dev, 0x95, 0xc0); // 0xc1??
/* Disable GP2 & GP3 Timer */
@ -147,7 +147,6 @@ void setup_pm(device_t dev)
/* Multi Function Select 2 */
pci_write_config8(dev, 0xe5, 0x41); //??
/* Enable ACPI access (and setup like award) */
pci_write_config8(dev, 0x81, 0x84);
@ -198,39 +197,41 @@ void setup_pm(device_t dev)
outw(0x001, 0x404);
*/
}
void S3_ps2_kb_ms_wakeup(struct device *dev)
{ u8 enables;
{
u8 enables;
enables = pci_read_config8(dev, 0x51);
enables |= 2;
pci_write_config8(dev, 0x51, enables);
outb(0xe0, 0x2e);
outb(0x0b, 0x2f);//if 09,then only support kb wakeup
outb(0xe1, 0x2e);//set any key scan code can wakeup
outb(0xe0, 0x2e);
outb(0x0b, 0x2f); //if 09,then only support kb wakeup
outb(0xe1, 0x2e); //set any key scan code can wakeup
outb(0x00, 0x2f);
outb(0xe9, 0x2e);//set any mouse scan code can wakeup
outb(0xe9, 0x2e); //set any mouse scan code can wakeup
outb(0x00, 0x2f);
enables &= 0xd;
pci_write_config8(dev, 0x51, enables);
outb(inb(VX800_ACPI_IO_BASE+0x02)|0x20, VX800_ACPI_IO_BASE+0x02);//ACPI golabe enable for sci smi trigger
outw(inw(VX800_ACPI_IO_BASE+0x22)|0x204, VX800_ACPI_IO_BASE+0x22);//ACPI SCI on Internal KBC PME and mouse PME
outb(inb(VX800_ACPI_IO_BASE + 0x02) | 0x20, VX800_ACPI_IO_BASE + 0x02); //ACPI golabe enable for sci smi trigger
outw(inw(VX800_ACPI_IO_BASE + 0x22) | 0x204, VX800_ACPI_IO_BASE + 0x22); //ACPI SCI on Internal KBC PME and mouse PME
}
void S3_usb_wakeup(struct device *dev)
{
outw(inw(VX800_ACPI_IO_BASE+0x22)|0x4000, VX800_ACPI_IO_BASE+0x22);//SCI on USB PME
outw(inw(VX800_ACPI_IO_BASE + 0x22) | 0x4000, VX800_ACPI_IO_BASE + 0x22); //SCI on USB PME
}
void S3_lid_wakeup(struct device *dev)
{
outw(inw(VX800_ACPI_IO_BASE+0x22)|0x800, VX800_ACPI_IO_BASE+0x22);//SCI on LID PME
outw(inw(VX800_ACPI_IO_BASE + 0x22) | 0x800, VX800_ACPI_IO_BASE + 0x22); //SCI on LID PME
}
/* This looks good enough to work, maybe */
static void vx800_sb_init(struct device *dev)
{
@ -242,7 +243,7 @@ static void vx800_sb_init(struct device *dev)
pci_write_config8(dev, 0x6C, enables);
// Map 4MB of FLASH into the address space
// pci_write_config8(dev, 0x41, 0x7f);
// pci_write_config8(dev, 0x41, 0x7f);
// Set bit 6 of 0x40, because Award does it (IO recovery time)
// IMPORTANT FIX - EISA 0x4d0 decoding must be on so that PCI
@ -260,7 +261,7 @@ static void vx800_sb_init(struct device *dev)
pci_write_config8(dev, 0x4c, 0x44);
/* ROM memory cycles go to LPC. */
pci_write_config8(dev, 0x59, 0x80);
pci_write_config8(dev, 0x59, 0x80);
/* Set 0x5b to 0x01 to match Award */
//pci_write_config8(dev, 0x5b, 0x01);
@ -268,16 +269,14 @@ static void vx800_sb_init(struct device *dev)
enables |= 0x01;
pci_write_config8(dev, 0x5b, enables);
/* Set Read Pass Write Control Enable */
pci_write_config8(dev, 0x48, 0x0c);
/* Set 0x58 to 0x42 APIC and RTC. */
//pci_write_config8(dev, 0x58, 0x42); this cmd cause the irq0 can not be triggerd,since bit 5 was set to 0.
enables=pci_read_config8(dev, 0x58);
enables|=0x41;//
pci_write_config8(dev, 0x58,enables);
enables = pci_read_config8(dev, 0x58);
enables |= 0x41; //
pci_write_config8(dev, 0x58, enables);
/* Set bit 3 of 0x4f to match award (use INIT# as cpu reset) */
enables = pci_read_config8(dev, 0x4f);
@ -308,21 +307,24 @@ void vx800_read_resources(device_t dev)
struct resource *resource;
pci_dev_read_resources(dev);
resource = new_resource(dev, 1);
resource->flags |= IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO | IORESOURCE_STORED;
resource->flags |=
IORESOURCE_FIXED | IORESOURCE_ASSIGNED | IORESOURCE_IO |
IORESOURCE_STORED;
resource->size = 2;
resource->base = 0x2e;
}
void vx800_set_resources(device_t dev)
{
struct resource *resource;
resource = find_resource(dev,1);
resource = find_resource(dev, 1);
resource->flags |= IORESOURCE_STORED;
pci_dev_set_resources(dev);
}
void vx800_enable_resources(device_t dev)
{
{
/* vx800 is not a pci bridge and has no resources of its own (other than
standard PC i/o addresses). however it does control the isa bus and so
we need to manually call enable childrens resources on that bus */
@ -332,18 +334,19 @@ void vx800_enable_resources(device_t dev)
}
static void southbridge_init(struct device *dev)
{
{
printk_debug("vx800 sb init\n");
vx800_sb_init(dev);
pci_routing_fixup(dev);
setup_i8259(); // make sure interupt controller is configured before keyboard init
setup_i8259(); // make sure interupt controller is configured before keyboard init
/* turn on keyboard and RTC, no need to visit this reg twice */
/* turn on keyboard and RTC, no need to visit this reg twice */
init_pc_keyboard(0x60, 0x64, 0);
printk_debug("ps2 usb lid, you set who can wakeup system from s3 sleep\n");
printk_debug
("ps2 usb lid, you set who can wakeup system from s3 sleep\n");
S3_ps2_kb_ms_wakeup(dev);
S3_usb_wakeup(dev);
S3_usb_wakeup(dev);
/* enable acpi cpu c3 state. (c2 state need not do anything.)
#1
@ -370,15 +373,15 @@ static void southbridge_init(struct device *dev)
}
static struct device_operations vx800_lpc_ops = {
.read_resources = vx800_read_resources,
.set_resources = vx800_set_resources,
.read_resources = vx800_read_resources,
.set_resources = vx800_set_resources,
.enable_resources = vx800_enable_resources,
.init = &southbridge_init,
.scan_bus = scan_static_bus,
.init = &southbridge_init,
.scan_bus = scan_static_bus,
};
static struct pci_driver lpc_driver __pci_driver = {
.ops = &vx800_lpc_ops,
.ops = &vx800_lpc_ops,
.vendor = PCI_VENDOR_ID_VIA,
.device = PCI_DEVICE_ID_VIA_VX855_LPC,
};