ipq806x: Change all SoC headers to <soc/headername.h> system

This patch aligns ipq806x to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.

BUG=None
TEST=Tested with whole series. Compiled Storm.

Change-Id: Icb81a77e6f458625f5379a980e8760388dd3a1f9
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 1bf23774c9ffa5d08c211f3658d39adcfa47b339
Original-Change-Id: I283cc7e6094be977d67ed4146f376cebcea6774a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224502
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9368
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: Patrick Georgi <pgeorgi@google.com>

src/mainboard/google/storm/boardid.c

@@ -17,10 +17,10 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-#include <stdlib.h>
 #include <boardid.h>
 #include <gpiolib.h>
 #include <console/console.h>
+#include <stdlib.h>
 
 /*
  * Storm boards dedicate to the board ID three GPIOs in tertiary mode: 29, 30

src/mainboard/google/storm/cdp.c

@@ -1,9 +1,9 @@
 
 /* * Copyright (c) 2012 - 2013 The Linux Foundation. All rights reserved.* */
 
+#include <soc/gpio.h>
+#include <soc/cdp.h>
 #include <types.h>
-#include <cdp.h>
-#include <gpio.h>
 
 void ipq_configure_gpio(const gpio_func_data_t *gpio, unsigned count)
 {

src/mainboard/google/storm/mainboard.c

@@ -24,13 +24,12 @@
 #include <delay.h>
 #include <device/device.h>
 #include <gpiolib.h>
+#include <soc/clock.h>
+#include <soc/gpio.h>
+#include <soc/usb.h>
 #include <string.h>
 #include <symbols.h>
 
-#include <soc/qualcomm/ipq806x/include/clock.h>
-#include <soc/qualcomm/ipq806x/include/gpio.h>
-#include <soc/qualcomm/ipq806x/include/usb.h>
-
 /* convenient shorthand (in MB) */
 #define DRAM_START           ((uintptr_t)_dram / MiB)
 #define DRAM_SIZE            (CONFIG_DRAM_SIZE_MB)

src/mainboard/google/storm/memlayout.ld

@@ -1 +1 @@
-#include <soc/qualcomm/ipq806x/memlayout.ld>
+#include <soc/memlayout.ld>

src/soc/qualcomm/ipq806x/Makefile.inc

@@ -40,6 +40,8 @@ ramstage-y += timer.c
 ramstage-$(CONFIG_DRIVERS_UART) += uart.c
 ramstage-y += usb.c
 
+INCLUDES += -Isrc/soc/qualcomm/ipq806x/include/
+
 ifeq ($(CONFIG_USE_BLOBS),y)
 
 # Generate the actual coreboot bootblock code

src/soc/qualcomm/ipq806x/clock.c

@@ -3,8 +3,8 @@
  */
 
 #include <delay.h>
+#include <soc/clock.h>
 #include <types.h>
-#include <clock.h>
 
 /**
  * uart_pll_vote_clk_enable - enables PLL8

src/soc/qualcomm/ipq806x/gpio.c

@@ -28,9 +28,9 @@
  * SUCH DAMAGE.
  */
 
-#include <iomap.h>
-#include <gpio.h>
 #include <arch/io.h>
+#include <soc/gpio.h>
+#include <soc/iomap.h>
 
 /*******************************************************
 Function description: check for invalid GPIO #

src/soc/qualcomm/ipq806x/include/soc/cdp.h

@@ -4,6 +4,8 @@
 #ifndef  _IPQ806X_CDP_H_
 #define  _IPQ806X_CDP_H_
 
+#include <types.h>
+
 unsigned smem_get_board_machtype(void);
 
 typedef enum {

src/soc/qualcomm/ipq806x/include/soc/clock.h

@@ -33,7 +33,7 @@
 #ifndef __IPQ860X_CLOCK_H_
 #define __IPQ860X_CLOCK_H_
 
-#include <iomap.h>
+#include <soc/iomap.h>
 
 /* UART clock @ 7.3728 MHz */
 #define UART_DM_CLK_RX_TX_BIT_RATE 0xCC

src/soc/qualcomm/ipq806x/include/soc/iomap.h

@@ -37,7 +37,7 @@
 #define __SOC_QUALCOMM_IPQ806X_IOMAP_H_
 
 #include <arch/io.h>
-#include <cdp.h>
+#include <soc/cdp.h>
 
 /* Typecast to allow integers being passed as address
    This needs to be included because vendor code is not compliant with our

src/soc/qualcomm/ipq806x/spi.c

@@ -4,11 +4,11 @@
 
 #include <arch/io.h>
 #include <delay.h>
+#include <soc/gpio.h>
+#include <soc/iomap.h>
+#include <soc/spi.h>
 #include <stdlib.h>
 #include <string.h>
-#include <spi.h>
-#include <gpio.h>
-#include <iomap.h>
 
 #define SUCCESS		0
 

src/soc/qualcomm/ipq806x/timer.c

@@ -29,8 +29,8 @@
  */
 
 #include <delay.h>
-#include <iomap.h>
-#include <ipq_timer.h>
+#include <soc/iomap.h>
+#include <soc/ipq_timer.h>
 #include <timer.h>
 
 /*

src/soc/qualcomm/ipq806x/uart.c

@@ -34,12 +34,12 @@
 #include <arch/io.h>
 #include <boot/coreboot_tables.h>
 #include <console/console.h>
-#include <delay.h>
-#include <clock.h>
-#include <gpio.h>
-#include <gsbi.h>
 #include <console/uart.h>
-#include <ipq_uart.h>
+#include <delay.h>
+#include <soc/clock.h>
+#include <soc/gpio.h>
+#include <soc/gsbi.h>
+#include <soc/ipq_uart.h>
 #include <stdint.h>
 #include <stdlib.h>
 

src/soc/qualcomm/ipq806x/usb.c

@@ -17,13 +17,12 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
  */
 
-#include <delay.h>
 #include <arch/io.h>
 #include <console/console.h>
-
-#include "clock.h"
-#include "iomap.h"
-#include "usb.h"
+#include <delay.h>
+#include <soc/clock.h>
+#include <soc/iomap.h>
+#include <soc/usb.h>
 
 #define CRPORT_TX_OVRD_DRV_LO	0x1002
 #define CRPORT_RX_OVRD_IN_HI	0x1006