northbridge/intel/i945: CHECK_SLFRCS_ON_RESUME Kconfig option
Originally brought up by Sven Schnelle in March 2011 http://patchwork.coreboot.org/patch/2801/ http://www.coreboot.org/pipermail/coreboot/2011-March/064277.html On some mainboards it may be neccessary to reset early during resume from S3 if the SLFRCS register indicates that a memory channel is not guaranteed to be in self-refresh. On other mainboards, such as Lenovo X60 and T60, the check always creates false positives, effectively making it impossible to resume. The SLFRCS register is documented on page 197 of Mobile Intel® 945 Express Chipset Family Datasheet Document Number: 309219-006 which is publically available, and the register indicates if a memory channel is guaranteed to be in self-refresh mode (if bit = 1), or that a memory channel *may or may not be* in self-refresh mode (if bit = 0). The register can thus only be used to positively learn that memory is in self-refresh. It is not known for sure that memory is *not* in self-refresh. The register is reset by the PWROK signal, which *should* go low during S3, and go high again when resuming, so it is unsurprising that SLFRCS has already been cleared when we read the register. Sven's measurements of the CKE signal on a ThinkPad shows that memory remains in self-refresh indefinitely, until coreboot re-initializes the memory controller, even when SLFRCS bits were = 0. Boards which require a warm reset when SLFRCS bits are cleared must now explicitly enable the check in the mainboard Kconfig file. This commit selects the new option in all existing i945 mainboards. A follow-up commit will remove the option for ThinkPads. Change-Id: I02320675efb8fde05c371ef243ba5093a4da6d11 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://review.coreboot.org/590 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org>
This commit is contained in:
parent
247c727693
commit
751508ab01
|
@ -23,6 +23,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
|
|||
select ARCH_X86
|
||||
select CPU_INTEL_SOCKET_MFCPGA478
|
||||
select NORTHBRIDGE_INTEL_I945GM
|
||||
select CHECK_SLFRCS_ON_RESUME
|
||||
select SOUTHBRIDGE_INTEL_I82801GX
|
||||
select SOUTHBRIDGE_TI_PCIXX12
|
||||
select SUPERIO_SMSC_FDC37N972
|
||||
|
|
|
@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
|
|||
select ARCH_X86
|
||||
select CPU_INTEL_SOCKET_MFCPGA478
|
||||
select NORTHBRIDGE_INTEL_I945GM
|
||||
select CHECK_SLFRCS_ON_RESUME
|
||||
select SOUTHBRIDGE_INTEL_I82801GX
|
||||
select SUPERIO_WINBOND_W83627EHG
|
||||
select BOARD_HAS_FADT
|
||||
|
|
|
@ -23,6 +23,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
|
|||
select ARCH_X86
|
||||
select CPU_INTEL_SOCKET_441
|
||||
select NORTHBRIDGE_INTEL_I945GC
|
||||
select CHECK_SLFRCS_ON_RESUME
|
||||
select SOUTHBRIDGE_INTEL_I82801GX
|
||||
select SUPERIO_SMSC_LPC47M15X
|
||||
select BOARD_HAS_FADT
|
||||
|
|
|
@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
|
|||
select ARCH_X86
|
||||
select CPU_INTEL_SOCKET_MFCPGA478
|
||||
select NORTHBRIDGE_INTEL_I945GM
|
||||
select CHECK_SLFRCS_ON_RESUME
|
||||
select SOUTHBRIDGE_INTEL_I82801GX
|
||||
select SUPERIO_WINBOND_W83627THG
|
||||
select BOARD_HAS_FADT
|
||||
|
|
|
@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
|
|||
select ARCH_X86
|
||||
select CPU_INTEL_SOCKET_MFCPGA478
|
||||
select NORTHBRIDGE_INTEL_I945GM
|
||||
select CHECK_SLFRCS_ON_RESUME
|
||||
select SOUTHBRIDGE_INTEL_I82801GX
|
||||
select SUPERIO_NSC_PC87382
|
||||
select SUPERIO_NSC_PC87384
|
||||
|
|
|
@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
|
|||
select ARCH_X86
|
||||
select CPU_INTEL_SOCKET_MFCPGA478
|
||||
select NORTHBRIDGE_INTEL_I945GM
|
||||
select CHECK_SLFRCS_ON_RESUME
|
||||
select SOUTHBRIDGE_INTEL_I82801GX
|
||||
select SOUTHBRIDGE_RICOH_RL5C476
|
||||
select SUPERIO_NSC_PC87382
|
||||
|
|
|
@ -5,6 +5,7 @@ config BOARD_SPECIFIC_OPTIONS # dummy
|
|||
select ARCH_X86
|
||||
select CPU_INTEL_SOCKET_MFCPGA478
|
||||
select NORTHBRIDGE_INTEL_I945GM
|
||||
select CHECK_SLFRCS_ON_RESUME
|
||||
select SOUTHBRIDGE_INTEL_I82801GX
|
||||
select SOUTHBRIDGE_TI_PCI7420
|
||||
select SUPERIO_SMSC_LPC47N227
|
||||
|
|
|
@ -53,4 +53,13 @@ config MAXIMUM_SUPPORTED_FREQUENCY
|
|||
the board supports, despite what the chipset should be
|
||||
capable of.
|
||||
|
||||
config CHECK_SLFRCS_ON_RESUME
|
||||
def_bool n
|
||||
help
|
||||
On some boards it may be neccessary to hard reset early
|
||||
during resume from S3 if the SLFRCS register indicates that
|
||||
a memory channel is not guaranteed to be in self-refresh.
|
||||
On other boards the check always creates a false positive,
|
||||
effectively making it impossible to resume.
|
||||
|
||||
endif
|
||||
|
|
|
@ -294,8 +294,8 @@ static void sdram_detect_errors(struct sys_info *sysinfo)
|
|||
reg8 |= (1<<7);
|
||||
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8);
|
||||
|
||||
/* clear self refresh if not wake-up from suspend */
|
||||
if (sysinfo->boot_path != 2) {
|
||||
/* clear self refresh status if check is disabled or not a resume */
|
||||
if (!CONFIG_CHECK_SLFRCS_ON_RESUME || sysinfo->boot_path != 2) {
|
||||
MCHBAR8(0xf14) |= 3;
|
||||
} else {
|
||||
/* Validate self refresh config */
|
||||
|
|
Loading…
Reference in New Issue