[REMOVAL] tyan/s2875
As announced in http://permalink.gmane.org/gmane.linux.bios/81918 I am removing all boards older than 10 years from the tree. Change-Id: I36c2b0290f95f4c0f6bed6a7427fb3aab968d4da Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/12376 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
This commit is contained in:
Stefan Reinauer
parent
69ded8f79f
commit
7593bda5a8
|
|
@ -1,49 +0,0 @@
|
|||
if BOARD_TYAN_S2875
|
||||
|
||||
config BOARD_SPECIFIC_OPTIONS # dummy
|
||||
def_bool y
|
||||
select CPU_AMD_SOCKET_940
|
||||
select NORTHBRIDGE_AMD_AMDK8
|
||||
select SOUTHBRIDGE_AMD_AMD8151
|
||||
select SOUTHBRIDGE_AMD_AMD8111
|
||||
select SUPERIO_WINBOND_W83627HF
|
||||
select HAVE_OPTION_TABLE
|
||||
select HAVE_PIRQ_TABLE
|
||||
select HAVE_MP_TABLE
|
||||
select BOARD_ROMSIZE_KB_512
|
||||
select SB_HT_CHAIN_UNITID_OFFSET_ONLY
|
||||
select QRANK_DIMM_SUPPORT
|
||||
|
||||
config MAINBOARD_DIR
|
||||
string
|
||||
default tyan/s2875
|
||||
|
||||
config MAINBOARD_PART_NUMBER
|
||||
string
|
||||
default "S2875"
|
||||
|
||||
config MAX_CPUS
|
||||
int
|
||||
default 4
|
||||
|
||||
config MAX_PHYSICAL_CPUS
|
||||
int
|
||||
default 2
|
||||
|
||||
config IRQ_SLOT_COUNT
|
||||
int
|
||||
default 13
|
||||
|
||||
config HT_CHAIN_UNITID_BASE
|
||||
hex
|
||||
default 1
|
||||
|
||||
config HT_CHAIN_END_UNITID_BASE
|
||||
hex
|
||||
default 0x20
|
||||
|
||||
config APIC_ID_OFFSET
|
||||
hex
|
||||
default 0x0
|
||||
|
||||
endif # BOARD_TYAN_S2875
|
||||
|
|
@ -1,2 +0,0 @@
|
|||
config BOARD_TYAN_S2875
|
||||
bool "S2875 (Tiger K8W)"
|
||||
|
|
@ -1,4 +0,0 @@
|
|||
Board name: Tiger K8W (S2875)
|
||||
Category: desktop
|
||||
Board URL: http://www.tyan.com/archive/products/html/tigerk8w.html
|
||||
Release year: 2003
|
||||
|
|
@ -1,60 +0,0 @@
|
|||
entries
|
||||
|
||||
0 384 r 0 reserved_memory
|
||||
384 1 e 4 boot_option
|
||||
388 4 r 0 reboot_bits
|
||||
392 3 e 5 baud_rate
|
||||
395 1 e 1 hw_scrubber
|
||||
396 1 e 1 interleave_chip_selects
|
||||
397 2 e 8 max_mem_clock
|
||||
399 1 e 2 multi_core
|
||||
400 1 e 1 power_on_after_fail
|
||||
412 4 e 6 debug_level
|
||||
440 4 e 9 slow_cpu
|
||||
444 1 e 1 nmi
|
||||
445 1 e 1 iommu
|
||||
456 1 e 1 ECC_memory
|
||||
728 256 h 0 user_data
|
||||
984 16 h 0 check_sum
|
||||
# Reserve the extended AMD configuration registers
|
||||
1000 24 r 0 amd_reserved
|
||||
|
||||
|
||||
|
||||
enumerations
|
||||
|
||||
#ID value text
|
||||
1 0 Disable
|
||||
1 1 Enable
|
||||
2 0 Enable
|
||||
2 1 Disable
|
||||
4 0 Fallback
|
||||
4 1 Normal
|
||||
5 0 115200
|
||||
5 1 57600
|
||||
5 2 38400
|
||||
5 3 19200
|
||||
5 4 9600
|
||||
5 5 4800
|
||||
5 6 2400
|
||||
5 7 1200
|
||||
6 6 Notice
|
||||
6 7 Info
|
||||
6 8 Debug
|
||||
6 9 Spew
|
||||
8 0 DDR400
|
||||
8 1 DDR333
|
||||
8 2 DDR266
|
||||
8 3 DDR200
|
||||
9 0 off
|
||||
9 1 87.5%
|
||||
9 2 75.0%
|
||||
9 3 62.5%
|
||||
9 4 50.0%
|
||||
9 5 37.5%
|
||||
9 6 25.0%
|
||||
9 7 12.5%
|
||||
|
||||
checksums
|
||||
|
||||
checksum 392 983 984
|
||||
|
|
@ -1,87 +0,0 @@
|
|||
chip northbridge/amd/amdk8/root_complex
|
||||
device cpu_cluster 0 on
|
||||
chip cpu/amd/socket_940
|
||||
device lapic 0 on end
|
||||
end
|
||||
end
|
||||
device domain 0 on
|
||||
subsystemid 0x10f1 0x2875 inherit
|
||||
chip northbridge/amd/amdk8
|
||||
device pci 18.0 on # northbridge
|
||||
# devices on link 0, link 0 == LDT 0
|
||||
chip southbridge/amd/amd8151
|
||||
# the on/off keyword is mandatory
|
||||
device pci 0.0 on end
|
||||
device pci 1.0 on end
|
||||
end
|
||||
chip southbridge/amd/amd8111
|
||||
# this "device pci 0.0" is the parent the next one
|
||||
# PCI bridge
|
||||
device pci 0.0 on
|
||||
device pci 0.0 on end
|
||||
device pci 0.1 on end
|
||||
device pci 0.2 off end
|
||||
device pci 1.0 off end
|
||||
device pci 5.0 on end
|
||||
end
|
||||
device pci 1.0 on
|
||||
chip superio/winbond/w83627hf
|
||||
device pnp 2e.0 on # Floppy
|
||||
io 0x60 = 0x3f0
|
||||
irq 0x70 = 6
|
||||
drq 0x74 = 2
|
||||
end
|
||||
device pnp 2e.1 off # Parallel Port
|
||||
io 0x60 = 0x378
|
||||
irq 0x70 = 7
|
||||
end
|
||||
device pnp 2e.2 on # Com1
|
||||
io 0x60 = 0x3f8
|
||||
irq 0x70 = 4
|
||||
end
|
||||
device pnp 2e.3 off # Com2
|
||||
io 0x60 = 0x2f8
|
||||
irq 0x70 = 3
|
||||
end
|
||||
device pnp 2e.5 on # Keyboard
|
||||
io 0x60 = 0x60
|
||||
io 0x62 = 0x64
|
||||
irq 0x70 = 1
|
||||
irq 0x72 = 12
|
||||
end
|
||||
device pnp 2e.6 off # CIR
|
||||
io 0x60 = 0x100
|
||||
end
|
||||
device pnp 2e.7 off # GAME_MIDI_GIPO1
|
||||
io 0x60 = 0x220
|
||||
io 0x62 = 0x300
|
||||
irq 0x70 = 9
|
||||
end
|
||||
device pnp 2e.8 off end # GPIO2
|
||||
device pnp 2e.9 off end # GPIO3
|
||||
device pnp 2e.a off end # ACPI
|
||||
device pnp 2e.b on # HW Monitor
|
||||
io 0x60 = 0x290
|
||||
irq 0x70 = 5
|
||||
end
|
||||
end
|
||||
end
|
||||
device pci 1.1 on end
|
||||
device pci 1.2 on end
|
||||
device pci 1.3 on end
|
||||
device pci 1.5 on end
|
||||
device pci 1.6 off end
|
||||
register "ide0_enable" = "1"
|
||||
register "ide1_enable" = "1"
|
||||
end
|
||||
end # device pci 18.0
|
||||
|
||||
device pci 18.0 on end
|
||||
device pci 18.0 on end
|
||||
|
||||
device pci 18.1 on end
|
||||
device pci 18.2 on end
|
||||
device pci 18.3 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
|
@ -1,34 +0,0 @@
|
|||
#include <arch/pirq_routing.h>
|
||||
|
||||
static const struct irq_routing_table intel_irq_routing_table = {
|
||||
PIRQ_SIGNATURE, /* u32 signature */
|
||||
PIRQ_VERSION, /* u16 version */
|
||||
32+16*CONFIG_IRQ_SLOT_COUNT, /* there can be total CONFIG_IRQ_SLOT_COUNT devices on the bus */
|
||||
1, /* Where the interrupt router lies (bus) */
|
||||
(5<<3)|3, /* Where the interrupt router lies (dev) */
|
||||
0, /* IRQs devoted exclusively to PCI usage */
|
||||
0x1022, /* Vendor */
|
||||
0x746b, /* Device */
|
||||
0, /* Miniport data */
|
||||
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
|
||||
0xcf, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all bytes for this structure (including checksum) */
|
||||
{
|
||||
{1,(5<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0, 0},
|
||||
{0x3,0, {{0, 0}, {0, 0}, {0, 0}, {0x4, 0xdef8}}, 0, 0},
|
||||
{1,(1<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0},
|
||||
{0x2,0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0, 0}, {0, 0}}, 0, 0},
|
||||
{0x3,(4<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x5, 0},
|
||||
{0x3,(7<<3)|0, {{0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}}, 0x4, 0},
|
||||
{0x3,(6<<3)|0, {{0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}, {0x2, 0xdef8}}, 0x1, 0},
|
||||
{0x3,(8<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0x1, 0xdef8}}, 0x2, 0},
|
||||
{0x3,(9<<3)|0, {{0x1, 0xdef8}, {0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}}, 0x3, 0},
|
||||
{0x3,(5<<3)|0, {{0x4, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
|
||||
{0x3,(3<<3)|0, {{0x3, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
|
||||
{0x3,(0x0a<<3)|0, {{0x2, 0xdef8}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
|
||||
{0x3,(0x0b<<3)|0, {{0x2, 0xdef8}, {0x3, 0xdef8}, {0x4, 0xdef8}, {0, 0}}, 0, 0},
|
||||
}
|
||||
};
|
||||
unsigned long write_pirq_routing_table(unsigned long addr)
|
||||
{
|
||||
return copy_pirq_routing_table(addr, &intel_irq_routing_table);
|
||||
}
|
||||
|
|
@ -1,180 +0,0 @@
|
|||
#include <console/console.h>
|
||||
#include <arch/smp/mpspec.h>
|
||||
#include <arch/ioapic.h>
|
||||
#include <device/pci.h>
|
||||
#include <string.h>
|
||||
#include <stdint.h>
|
||||
#if CONFIG_LOGICAL_CPUS
|
||||
#include <cpu/amd/multicore.h>
|
||||
#endif
|
||||
|
||||
static unsigned node_link_to_bus(unsigned node, unsigned link)
|
||||
{
|
||||
device_t dev;
|
||||
unsigned reg;
|
||||
|
||||
dev = dev_find_slot(0, PCI_DEVFN(0x18, 1));
|
||||
if (!dev) {
|
||||
return 0;
|
||||
}
|
||||
for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
|
||||
uint32_t config_map;
|
||||
unsigned dst_node;
|
||||
unsigned dst_link;
|
||||
unsigned bus_base;
|
||||
config_map = pci_read_config32(dev, reg);
|
||||
if ((config_map & 3) != 3) {
|
||||
continue;
|
||||
}
|
||||
dst_node = (config_map >> 4) & 7;
|
||||
dst_link = (config_map >> 8) & 3;
|
||||
bus_base = (config_map >> 16) & 0xff;
|
||||
#if 0
|
||||
printk(BIOS_DEBUG, "node.link=bus: %d.%d=%d 0x%2x->0x%08x\n",
|
||||
dst_node, dst_link, bus_base,
|
||||
reg, config_map);
|
||||
#endif
|
||||
if ((dst_node == node) && (dst_link == link))
|
||||
{
|
||||
return bus_base;
|
||||
}
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void *smp_write_config_table(void *v)
|
||||
{
|
||||
struct mp_config_table *mc;
|
||||
int bus_isa;
|
||||
unsigned char bus_chain_0;
|
||||
unsigned char bus_8111_1;
|
||||
unsigned char bus_8151_1;
|
||||
unsigned apicid_base;
|
||||
unsigned apicid_8111;
|
||||
|
||||
mc = (void *)(((char *)v) + SMP_FLOATING_TABLE_LEN);
|
||||
|
||||
mptable_init(mc, LOCAL_APIC_ADDR);
|
||||
|
||||
smp_write_processors(mc);
|
||||
|
||||
{
|
||||
device_t dev;
|
||||
|
||||
/* HT chain 0 */
|
||||
bus_chain_0 = node_link_to_bus(0, 0);
|
||||
if (bus_chain_0 == 0) {
|
||||
printk(BIOS_DEBUG, "ERROR - cound not find bus for node 0 chain 0, using defaults\n");
|
||||
bus_chain_0 = 1;
|
||||
}
|
||||
|
||||
/* 8111 */
|
||||
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x04,0));
|
||||
if (dev) {
|
||||
bus_8111_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
}
|
||||
else {
|
||||
printk(BIOS_DEBUG, "ERROR - could not find PCI 1:03.0, using defaults\n");
|
||||
|
||||
bus_8111_1 = 3;
|
||||
}
|
||||
/* 8151 */
|
||||
dev = dev_find_slot(bus_chain_0, PCI_DEVFN(0x02,0));
|
||||
if (dev) {
|
||||
bus_8151_1 = pci_read_config8(dev, PCI_SECONDARY_BUS);
|
||||
printk(BIOS_DEBUG, "bus_8151_1=%d\n",bus_8151_1);
|
||||
|
||||
}
|
||||
else {
|
||||
printk(BIOS_DEBUG, "ERROR - could not find PCI 1:02.0, using defaults\n");
|
||||
|
||||
bus_8151_1 = 2;
|
||||
}
|
||||
|
||||
|
||||
}
|
||||
|
||||
/*Bus: Bus ID Type*/
|
||||
mptable_write_buses(mc, NULL, &bus_isa);
|
||||
|
||||
/*I/O APICs: APIC ID Version State Address*/
|
||||
#if CONFIG_LOGICAL_CPUS
|
||||
apicid_base = get_apicid_base(1);
|
||||
#else
|
||||
apicid_base = CONFIG_MAX_PHYSICAL_CPUS;
|
||||
#endif
|
||||
apicid_8111 = apicid_base+0;
|
||||
smp_write_ioapic(mc, apicid_8111, 0x11, VIO_APIC_VADDR);
|
||||
|
||||
mptable_add_isa_interrupts(mc, bus_isa, apicid_8111, 0);
|
||||
|
||||
/*I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN# */
|
||||
//??? What
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (5<<2)|3, apicid_8111, 0x13);
|
||||
//Onboard AMD AC97 Audio ???
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_chain_0, (5<<2)|1, apicid_8111, 0x11);
|
||||
// Onboard AMD USB
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0<<2)|3, apicid_8111, 0x13);
|
||||
|
||||
// AGP Display Adapter
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8151_1, 0x0, apicid_8111, 0x10);
|
||||
|
||||
// Onboard Serial ATA
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x05<<2)|0, apicid_8111, 0x13);
|
||||
//Onboard Firewire
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0a<<2)|0, apicid_8111, 0x11);
|
||||
//Onboard Broadcom NIC
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x03<<2)|0, apicid_8111, 0x12);
|
||||
|
||||
//Onboard VIA USB 1.1
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|0, apicid_8111, 0x11);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|1, apicid_8111, 0x12);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x0b<<2)|2, apicid_8111, 0x13);
|
||||
|
||||
//Slot 1
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|0, apicid_8111, 0x12);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|1, apicid_8111, 0x13);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|2, apicid_8111, 0x10); //
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x06<<2)|3, apicid_8111, 0x11); //
|
||||
|
||||
//Slot 2
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|0, apicid_8111, 0x11);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|1, apicid_8111, 0x12);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|2, apicid_8111, 0x13); //
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x08<<2)|3, apicid_8111, 0x10); //
|
||||
|
||||
//Slot 3
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|0, apicid_8111, 0x10);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|1, apicid_8111, 0x11);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|2, apicid_8111, 0x12); //
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x09<<2)|3, apicid_8111, 0x13); //
|
||||
|
||||
//Slot 4
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|0, apicid_8111, 0x13);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|1, apicid_8111, 0x10);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|2, apicid_8111, 0x11); //
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x07<<2)|3, apicid_8111, 0x12); //
|
||||
|
||||
|
||||
//Slot 5
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x04<<2)|0, apicid_8111, 0x10);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x04<<2)|1, apicid_8111, 0x11);
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x04<<2)|2, apicid_8111, 0x12); //
|
||||
smp_write_intsrc(mc, mp_INT, MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW, bus_8111_1, (0x04<<2)|3, apicid_8111, 0x13); //
|
||||
|
||||
|
||||
|
||||
/*Local Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#*/
|
||||
mptable_lintsrc(mc, bus_isa);
|
||||
/* There is no extension information... */
|
||||
|
||||
/* Compute the checksums */
|
||||
return mptable_finalize(mc);
|
||||
}
|
||||
|
||||
unsigned long write_smp_table(unsigned long addr)
|
||||
{
|
||||
void *v;
|
||||
v = smp_write_floating_table(addr, 0);
|
||||
return (unsigned long)smp_write_config_table(v);
|
||||
}
|
||||
|
|
@ -1,115 +0,0 @@
|
|||
#include <stdint.h>
|
||||
#include <string.h>
|
||||
#include <device/pci_def.h>
|
||||
#include <arch/io.h>
|
||||
#include <device/pnp_def.h>
|
||||
#include <stdlib.h>
|
||||
#include <pc80/mc146818rtc.h>
|
||||
#include <console/console.h>
|
||||
#include <lib.h>
|
||||
#include <spd.h>
|
||||
#include <cpu/amd/model_fxx_rev.h>
|
||||
#include "northbridge/amd/amdk8/incoherent_ht.c"
|
||||
#include "southbridge/amd/amd8111/early_smbus.c"
|
||||
#include <northbridge/amd/amdk8/raminit.h>
|
||||
#include <delay.h>
|
||||
#include "northbridge/amd/amdk8/reset_test.c"
|
||||
#include "northbridge/amd/amdk8/debug.c"
|
||||
#include <superio/winbond/common/winbond.h>
|
||||
#include <superio/winbond/w83627hf/w83627hf.h>
|
||||
#include <cpu/x86/bist.h>
|
||||
#include "northbridge/amd/amdk8/setup_resource_map.c"
|
||||
#include "southbridge/amd/amd8111/early_ctrl.c"
|
||||
|
||||
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
|
||||
|
||||
static void memreset_setup(void)
|
||||
{
|
||||
if (is_cpu_pre_c0())
|
||||
outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=0
|
||||
else
|
||||
outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16); //REVC_MEMRST_EN=1
|
||||
outb((1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
|
||||
}
|
||||
|
||||
static void memreset(int controllers, const struct mem_controller *ctrl)
|
||||
{
|
||||
if (is_cpu_pre_c0()) {
|
||||
udelay(800);
|
||||
outb((1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17); //REVB_MEMRST_L=1
|
||||
udelay(90);
|
||||
}
|
||||
}
|
||||
|
||||
static void activate_spd_rom(const struct mem_controller *ctrl) { }
|
||||
|
||||
static inline int spd_read_byte(unsigned device, unsigned address)
|
||||
{
|
||||
return smbus_read_byte(device, address);
|
||||
}
|
||||
|
||||
#include "northbridge/amd/amdk8/raminit.c"
|
||||
#include "northbridge/amd/amdk8/coherent_ht.c"
|
||||
#include "lib/generic_sdram.c"
|
||||
#include "northbridge/amd/amdk8/resourcemap.c"
|
||||
#include "cpu/amd/dualcore/dualcore.c"
|
||||
#include "cpu/amd/model_fxx/init_cpus.c"
|
||||
|
||||
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
|
||||
{
|
||||
static const struct mem_controller cpu[] = {
|
||||
{
|
||||
.node_id = 0,
|
||||
.f0 = PCI_DEV(0, 0x18, 0),
|
||||
.f1 = PCI_DEV(0, 0x18, 1),
|
||||
.f2 = PCI_DEV(0, 0x18, 2),
|
||||
.f3 = PCI_DEV(0, 0x18, 3),
|
||||
.channel0 = { DIMM0, DIMM2, 0, 0 },
|
||||
.channel1 = { DIMM1, DIMM3, 0, 0 },
|
||||
},
|
||||
#if CONFIG_MAX_PHYSICAL_CPUS > 1
|
||||
{
|
||||
.node_id = 1,
|
||||
.f0 = PCI_DEV(0, 0x19, 0),
|
||||
.f1 = PCI_DEV(0, 0x19, 1),
|
||||
.f2 = PCI_DEV(0, 0x19, 2),
|
||||
.f3 = PCI_DEV(0, 0x19, 3),
|
||||
.channel0 = { DIMM4, DIMM6, 0, 0 },
|
||||
.channel1 = { DIMM5, DIMM7, 0, 0 },
|
||||
},
|
||||
#endif
|
||||
};
|
||||
|
||||
int needs_reset;
|
||||
|
||||
if (bist == 0)
|
||||
init_cpus(cpu_init_detectedx);
|
||||
|
||||
winbond_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
|
||||
console_init();
|
||||
|
||||
/* Halt if there was a built in self test failure */
|
||||
report_bist_failure(bist);
|
||||
|
||||
setup_default_resource_map();
|
||||
|
||||
needs_reset = setup_coherent_ht_domain();
|
||||
|
||||
#if CONFIG_LOGICAL_CPUS
|
||||
// It is said that we should start core1 after all core0 launched
|
||||
start_other_cores();
|
||||
#endif
|
||||
needs_reset |= ht_setup_chains_x();
|
||||
|
||||
if (needs_reset) {
|
||||
printk(BIOS_INFO, "ht reset -\n");
|
||||
soft_reset();
|
||||
}
|
||||
|
||||
enable_smbus();
|
||||
|
||||
memreset_setup();
|
||||
sdram_initialize(ARRAY_SIZE(cpu), cpu);
|
||||
|
||||
post_cache_as_ram();
|
||||
}
|
||||
Loading…
Reference in New Issue