soc/intel/alderlake: add processor power limits control support

Add processor power limits control support to configure values for
alderlake soc based platforms.

BRANCH=None
BUG=None
TEST=Build and test on alderlake rvp board

Change-Id: I9dc37c7a43e6bd6f1ff5e8a97e22a0c7ac421802
Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
This commit is contained in:
Sumeet R Pawnikar 2021-03-10 21:09:37 +05:30 committed by Patrick Georgi
parent 8bd525001f
commit 77298c6820
3 changed files with 17 additions and 1 deletions

View File

@ -59,6 +59,7 @@ config CPU_SPECIFIC_OPTIONS
select SOC_INTEL_COMMON_BLOCK_HDA
select SOC_INTEL_COMMON_BLOCK_IPU
select SOC_INTEL_COMMON_BLOCK_MEMINIT
select SOC_INTEL_COMMON_BLOCK_POWER_LIMIT
select SOC_INTEL_COMMON_BLOCK_SA
select SOC_INTEL_COMMON_BLOCK_SMM
select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP

View File

@ -7,6 +7,7 @@
#include <intelblocks/cfg.h>
#include <intelblocks/gpio.h>
#include <intelblocks/gspi.h>
#include <intelblocks/power_limit.h>
#include <intelblocks/pcie_rp.h>
#include <soc/gpe.h>
#include <soc/pci_devs.h>
@ -24,6 +25,9 @@ struct soc_intel_alderlake_config {
/* Common struct containing soc config data required by common code */
struct soc_intel_common_config common_soc_config;
/* Common struct containing power limits configuration information */
struct soc_power_limits_config power_limits_config;
/* Gpio group routed to each dword of the GPE0 block. Values are
* of the form PMC_GPP_[A:U] or GPD. */
uint8_t pmc_gpe0_dw0; /* GPE0_31_0 STS/EN */

View File

@ -8,8 +8,11 @@
#include <device/device.h>
#include <device/pci.h>
#include <delay.h>
#include <intelblocks/power_limit.h>
#include <intelblocks/systemagent.h>
#include <soc/iomap.h>
#include <soc/soc_chip.h>
#include <soc/systemagent.h>
/*
@ -48,12 +51,20 @@ void soc_add_fixed_mmio_resources(struct device *dev, int *index)
*/
void soc_systemagent_init(struct device *dev)
{
struct soc_power_limits_config *soc_config;
config_t *config;
/* Enable Power Aware Interrupt Routing */
enable_power_aware_intr();
/* Enable BIOS Reset CPL */
enable_bios_reset_cpl();
/* TODO: Add set_power_limits() */
/* Configure turbo power limits 1ms after reset complete bit */
mdelay(1);
config = config_of_soc();
soc_config = &config->power_limits_config;
set_power_limits(MOBILE_SKU_PL1_TIME_SEC, soc_config);
}
uint32_t soc_systemagent_max_chan_capacity_mib(u8 capid0_a_ddrsz)