diff --git a/src/northbridge/intel/i945/early_init.c b/src/northbridge/intel/i945/early_init.c index 64b3ce10b6..a829644ef8 100644 --- a/src/northbridge/intel/i945/early_init.c +++ b/src/northbridge/intel/i945/early_init.c @@ -22,14 +22,14 @@ static int i945_silicon_revision(void) { - return pci_read_config8(PCI_DEV(0, 0x00, 0), 8); + return pci_read_config8(PCI_DEV(0, 0x00, 0), PCI_CLASS_REVISION); } static void i945_detect_chipset(void) { u8 reg8; - printk_info("\r\n"); + printk_info("\n"); reg8 = (pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe7) & 0x70) >> 4; switch (reg8) { case 1: @@ -50,7 +50,7 @@ static void i945_detect_chipset(void) default: printk_info("Unknown (%02x)", reg8); /* Others reserved. */ } - printk_info(" Chipset\r\n"); + printk_info(" Chipset\n"); printk_debug("(G)MCH capable of up to FSB "); reg8 = (pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe3) & 0xe0) >> 5; @@ -67,7 +67,7 @@ static void i945_detect_chipset(void) default: printk_debug("N/A MHz (%02x)", reg8); } - printk_debug("\r\n"); + printk_debug("\n"); printk_debug("(G)MCH capable of "); reg8 = (pci_read_config8(PCI_DEV(0, 0x00, 0), 0xe4) & 0x07); @@ -84,7 +84,7 @@ static void i945_detect_chipset(void) default: printk_info("unknown max. RAM clock (%02x).", reg8); /* Others reserved. */ } - printk_debug("\r\n"); + printk_debug("\n"); } static void i945_setup_bars(void) @@ -94,7 +94,7 @@ static void i945_setup_bars(void) /* As of now, we don't have all the A0 workarounds implemented */ if (i945_silicon_revision() == 0) printk_info - ("Warning: i945 silicon revision A0 might not work correctly.\r\n"); + ("Warning: i945 silicon revision A0 might not work correctly.\n"); /* Setting up Southbridge. In the northbridge code. */ printk_debug("Setting up static southbridge registers..."); @@ -106,12 +106,12 @@ static void i945_setup_bars(void) pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */ , 0x10); /* Enable GPIOs */ setup_ich7_gpios(); - printk_debug(" done.\r\n"); + printk_debug(" done.\n"); printk_debug("Disabling Watchdog reboot..."); RCBA32(GCS) = (RCBA32(0x3410)) | (1 << 5); /* No reset */ outw((1 << 11), DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */ - printk_debug(" done.\r\n"); + printk_debug(" done.\n"); printk_debug("Setting up static northbridge registers..."); /* Set up all hardcoded northbridge BARs */ @@ -135,10 +135,8 @@ static void i945_setup_bars(void) pci_write_config8(PCI_DEV(0, 0x00, 0), PAM5, 0x33); pci_write_config8(PCI_DEV(0, 0x00, 0), PAM6, 0x33); - pci_write_config8(PCI_DEV(0, 0x00, 0), TOLUD, 0x40); /* 1G XXX dynamic! */ - pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, 0xcafebabe); - printk_debug(" done.\r\n"); + printk_debug(" done.\n"); /* Wait for MCH BAR to come up */ printk_debug("Waiting for MCHBAR to come up..."); @@ -147,7 +145,7 @@ static void i945_setup_bars(void) reg8 = *(volatile u8 *)0xfed40000; } while (!(reg8 & 0x80)); } - printk_debug("ok\r\n"); + printk_debug("ok\n"); } static void i945_setup_egress_port(void) @@ -440,24 +438,23 @@ static void i945_setup_pci_express_x16(void) u32 timeout; u32 reg32; u16 reg16; - u8 reg8; /* For now we just disable the x16 link */ printk_debug("Disabling PCI Express x16 Link\n"); MCHBAR16(UPMC1) |= (1 << 5) | (1 << 0); - reg8 = pcie_read_config8(PCI_DEV(0, 0x01, 0), BCTRL1); - reg8 |= (1 << 6); - pcie_write_config8(PCI_DEV(0, 0x01, 0), BCTRL1, reg8); + reg16 = pcie_read_config16(PCI_DEV(0, 0x01, 0), BCTRL1); + reg16 |= (1 << 6); + pcie_write_config16(PCI_DEV(0, 0x01, 0), BCTRL1, reg16); reg32 = pcie_read_config32(PCI_DEV(0, 0x01, 0), 0x224); reg32 |= (1 << 8); pcie_write_config32(PCI_DEV(0, 0x01, 0), 0x224, reg32); - reg8 = pcie_read_config8(PCI_DEV(0, 0x01, 0), BCTRL1); - reg8 &= ~(1 << 6); - pcie_write_config8(PCI_DEV(0, 0x01, 0), BCTRL1, reg8); + reg16 = pcie_read_config16(PCI_DEV(0, 0x01, 0), BCTRL1); + reg16 &= ~(1 << 6); + pcie_write_config16(PCI_DEV(0, 0x01, 0), BCTRL1, reg16); printk_debug("Wait for link to enter detect state... "); timeout = 0x7fffff; diff --git a/src/northbridge/intel/i945/i945.h b/src/northbridge/intel/i945/i945.h index 9f8315bc34..78a0723dfb 100644 --- a/src/northbridge/intel/i945/i945.h +++ b/src/northbridge/intel/i945/i945.h @@ -67,7 +67,7 @@ /* Device 0:1.0 PCI configuration space (PCI Express) */ -#define BCTRL1 0x3e /* 8bit */ +#define BCTRL1 0x3e /* 16bit */ /* Device 0:2.0 PCI configuration space (Graphics Device) */ diff --git a/src/northbridge/intel/i945/raminit.c b/src/northbridge/intel/i945/raminit.c index cae14ed80b..349174927e 100644 --- a/src/northbridge/intel/i945/raminit.c +++ b/src/northbridge/intel/i945/raminit.c @@ -67,13 +67,13 @@ static void do_ram_command(u32 command) MCHBAR32(DCC) = reg32; /* This is the actual magic */ - PRINTK_DEBUG("...done\r\n"); + PRINTK_DEBUG("...done\n"); } static void ram_read32(u32 offset) { - PRINTK_DEBUG(" ram read: %08x\r\n", offset); + PRINTK_DEBUG(" ram read: %08x\n", offset); read32(offset); } @@ -82,12 +82,12 @@ static void ram_read32(u32 offset) static void sdram_dump_mchbar_registers(void) { int i; - printk_debug("Dumping MCHBAR Registers\r\n"); + printk_debug("Dumping MCHBAR Registers\n"); for (i=0; i<0xfff; i+=4) { if (MCHBAR32(i) == 0) continue; - printk_debug("0x%04x: 0x%08x\r\n", i, MCHBAR32(i)); + printk_debug("0x%04x: 0x%08x\n", i, MCHBAR32(i)); } } #endif @@ -181,13 +181,13 @@ static void sdram_detect_errors(void) if (reg8 & ((1<<7)|(1<<2))) { if (reg8 & (1<<2)) { - printk_debug("SLP S4# Assertion Width Violation.\r\n"); + printk_debug("SLP S4# Assertion Width Violation.\n"); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); } if (reg8 & (1<<7)) { - printk_debug("DRAM initialization was interrupted.\r\n"); + printk_debug("DRAM initialization was interrupted.\n"); reg8 &= ~(1<<7); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); } @@ -197,7 +197,7 @@ static void sdram_detect_errors(void) reg8 |= (1 << 3); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8); - printk_debug("Reset required.\r\n"); + printk_debug("Reset required.\n"); outb(0x00, 0xcf9); outb(0x0e, 0xcf9); for (;;) ; /* Wait for reset! */ @@ -288,52 +288,52 @@ static void sdram_get_dram_configuration(struct sys_info *sysinfo) reg8 = spd_read_byte(device, SPD_DIMM_CONFIG_TYPE); if (reg8 == ERROR_SCHEME_ECC) - die("Error: ECC memory not supported by this chipset\r\n"); + die("Error: ECC memory not supported by this chipset\n"); reg8 = spd_read_byte(device, SPD_MODULE_ATTRIBUTES); if (reg8 & MODULE_BUFFERED) - die("Error: Buffered memory not supported by this chipset\r\n"); + die("Error: Buffered memory not supported by this chipset\n"); if (reg8 & MODULE_REGISTERED) - die("Error: Registered memory not supported by this chipset\r\n"); + die("Error: Registered memory not supported by this chipset\n"); switch (spd_read_byte(device, SPD_PRIMARY_SDRAM_WIDTH)) { case 0x08: switch (spd_read_byte(device, SPD_NUM_DIMM_BANKS) & 0x0f) { case 1: - printk_debug("x8DDS\r\n"); + printk_debug("x8DDS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X8DDS; break; case 0: - printk_debug("x8DS\r\n"); + printk_debug("x8DS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X8DS; break; default: - printk_debug ("Unsupported.\r\n"); + printk_debug ("Unsupported.\n"); } break; case 0x10: switch (spd_read_byte(device, SPD_NUM_DIMM_BANKS) & 0x0f) { case 1: - printk_debug("x16DS\r\n"); + printk_debug("x16DS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X16DS; break; case 0: - printk_debug("x16SS\r\n"); + printk_debug("x16SS\n"); sysinfo->dimm[i] = SYSINFO_DIMM_X16SS; break; default: - printk_debug ("Unsupported.\r\n"); + printk_debug ("Unsupported.\n"); } break; default: - die("Unsupported DDR-II memory width.\r\n"); + die("Unsupported DDR-II memory width.\n"); } dimm_mask |= (1 << i); } if (!dimm_mask) { - die("No memory installed.\r\n"); + die("No memory installed.\n"); } /* The chipset might be able to do this. What the heck, legacy bios @@ -341,7 +341,7 @@ static void sdram_get_dram_configuration(struct sys_info *sysinfo) * not bother until someone needs this enough to cope with it. */ if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) { - printk_err("Channel 0 has no memory populated. This setup is not usable. Please move the DIMM.\r\n"); + printk_err("Channel 0 has no memory populated. This setup is not usable. Please move the DIMM.\n"); } } @@ -991,18 +991,18 @@ static void sdram_rcomp_buffer_strength_and_slew(struct sys_info *sysinfo) /* Dual Channel needs different tables. */ if (sdram_capabilities_dual_channel()) { - printk_debug("Programming Dual Channel RCOMP\r\n"); + printk_debug("Programming Dual Channel RCOMP\n"); strength_multiplier = dual_channel_strength_multiplier; slew_group_lookup = dual_channel_slew_group_lookup; idx = 5 * sysinfo->dimm[0] + sysinfo->dimm[2]; } else { - printk_debug("Programming Single Channel RCOMP\r\n"); + printk_debug("Programming Single Channel RCOMP\n"); strength_multiplier = single_channel_strength_multiplier; slew_group_lookup = single_channel_slew_group_lookup; idx = 5 * sysinfo->dimm[0] + sysinfo->dimm[1]; } - printk_debug("Table Index: %d\r\n", idx); + printk_debug("Table Index: %d\n", idx); MCHBAR8(G1SC) = strength_multiplier[idx * 8 + 0]; MCHBAR8(G2SC) = strength_multiplier[idx * 8 + 1]; @@ -1052,7 +1052,7 @@ static void sdram_program_dll_timings(struct sys_info *sysinfo) u32 chan0dll = 0, chan1dll = 0; int i; - printk_debug ("Programming DLL Timings... \r\n"); + printk_debug ("Programming DLL Timings... \n"); MCHBAR16(DQSMT) &= ~( (3 << 12) | (1 << 10) | ( 0xf << 0) ); MCHBAR16(DQSMT) |= (1 << 13) | (0xc << 0); @@ -1102,7 +1102,7 @@ static void sdram_initialize_system_memory_io(struct sys_info *sysinfo) u8 reg8; u32 reg32; - printk_debug ("Initializing System Memory IO... \r\n"); + printk_debug ("Initializing System Memory IO... \n"); reg8 = MCHBAR8(C0HCTC); reg8 &= ~0x1f; @@ -1141,7 +1141,7 @@ static void sdram_enable_system_memory_io(struct sys_info *sysinfo) { u32 reg32; - printk_debug ("Enabling System Memory IO... \r\n"); + printk_debug ("Enabling System Memory IO... \n"); reg32 = MCHBAR32(RCVENMT); reg32 &= ~(0x3f << 6); @@ -1261,7 +1261,7 @@ static struct dimm_size sdram_get_dimm_size(u16 device) goto out; val_err: - die("Bad SPD value\r\n"); + die("Bad SPD value\n"); hw_err: /* If a hardware error occurs the spd rom probably does not exist. * In this case report that there is no memory @@ -1314,7 +1314,7 @@ static int sdram_program_row_boundaries(struct sys_info *sysinfo) int i; int cum0, cum1, tolud; - printk_debug ("Setting RAM size... \r\n"); + printk_debug ("Setting RAM size... \n"); cum0 = 0; for(i = 0; i < 2 * DIMM_SOCKETS; i++) { @@ -1344,11 +1344,15 @@ static int sdram_program_row_boundaries(struct sys_info *sysinfo) tolud = (cum0 + cum1) << 1; else tolud = (cum1 ? cum1 : cum0) << 1; - pci_write_config16(PCI_DEV(0,0,0), TOLUD, tolud); + + /* Some extra checks needed. See 4.1.26 in the + * 82945G MCH datasheet (30750203) + */ + pci_write_config8(PCI_DEV(0,0,0), TOLUD, tolud); - printk_debug("C0DRB = 0x%08x\r\n", MCHBAR32(C0DRB0)); - printk_debug("C1DRB = 0x%08x\r\n", MCHBAR32(C1DRB0)); - printk_debug("TOLUD = 0x%04x\r\n", tolud); + printk_debug("C0DRB = 0x%08x\n", MCHBAR32(C0DRB0)); + printk_debug("C1DRB = 0x%08x\n", MCHBAR32(C1DRB0)); + printk_debug("TOLUD = 0x%02x\n", tolud); pci_write_config16(PCI_DEV(0,0,0), TOM, tolud>>3); @@ -1361,7 +1365,7 @@ static int sdram_set_row_attributes(struct sys_info *sysinfo) int i, value; u16 dra0=0, dra1=0, dra = 0; - printk_debug ("Setting row attributes... \r\n"); + printk_debug ("Setting row attributes... \n"); for(i=0; i < 2 * DIMM_SOCKETS; i++) { u16 device; u8 columnsrows; @@ -1402,8 +1406,8 @@ static int sdram_set_row_attributes(struct sys_info *sysinfo) MCHBAR16(C0DRA0) = dra0; MCHBAR16(C1DRA0) = dra1; - printk_debug("C0DRA = 0x%04x\r\n", dra0); - printk_debug("C1DRA = 0x%04x\r\n", dra1); + printk_debug("C0DRA = 0x%04x\n", dra0); + printk_debug("C1DRA = 0x%04x\n", dra1); return 0; } @@ -1733,7 +1737,7 @@ static void sdram_set_channel_mode(struct sys_info *sysinfo) MCHBAR32(DCC) = reg32; - PRINTK_DEBUG("DCC=0x%08x\r\n", MCHBAR32(DCC)); + PRINTK_DEBUG("DCC=0x%08x\n", MCHBAR32(DCC)); } static void sdram_program_pll_settings(void) @@ -1778,7 +1782,7 @@ static void sdram_program_graphics_frequency(struct sys_info *sysinfo) #define CDCLK_200MHz 0x00 #define CDCLK_320MHz 0x40 - printk_debug ("Setting Graphics Frequency... \r\n"); + printk_debug ("Setting Graphics Frequency... \n"); reg16 = pci_read_config16(PCI_DEV(0,2,0), GCFC); reg16 |= (1<<11) | (1<<9); @@ -1850,7 +1854,7 @@ static void sdram_program_graphics_frequency(struct sys_info *sysinfo) } if (second_vco) { - printk_debug("Programming second TCO\r\n"); + printk_debug("Programming second TCO\n"); sysinfo->clkcfg_bit7=1; } else { sysinfo->clkcfg_bit7=0; @@ -1912,7 +1916,7 @@ static void sdram_program_memory_frequency(struct sys_info *sysinfo) } if (MCHBAR32(CLKCFG) == clkcfg) { - printk_debug ("ok (unchanged)\r\n"); + printk_debug ("ok (unchanged)\n"); return; } @@ -1957,7 +1961,7 @@ cache_code: out: printk_debug("CLKCFG=0x%08x, ", MCHBAR32(CLKCFG)); - printk_debug ("ok\r\n"); + printk_debug ("ok\n"); } static void sdram_program_clock_crossing(void) @@ -1997,15 +2001,15 @@ static void sdram_program_clock_crossing(void) case 2: printk_debug("400"); idx += 0; break; case 3: printk_debug("533"); idx += 2; break; case 4: printk_debug("667"); idx += 4; break; - default: printk_debug("RSVD\r\n"); return; + default: printk_debug("RSVD\n"); return; } printk_debug(" FSB="); switch (reg32 & 7) { - case 0: printk_debug("400\r\n"); return; + case 0: printk_debug("400\n"); return; case 1: printk_debug("533"); idx += 0; break; case 3: printk_debug("667"); idx += 4; break; - default: printk_debug("RSVD\r\n"); return; + default: printk_debug("RSVD\n"); return; } MCHBAR32(C0DCCFT + 0) = data_clock_crossing[idx]; @@ -2016,7 +2020,7 @@ static void sdram_program_clock_crossing(void) MCHBAR32(CCCFT + 0) = command_clock_crossing[idx]; MCHBAR32(CCCFT + 4) = command_clock_crossing[idx + 1]; - printk_debug("... ok\r\n"); + printk_debug("... ok\n"); } static void sdram_disable_fast_dispatch(void) @@ -2525,27 +2529,27 @@ static void sdram_jedec_enable(struct sys_info *sysinfo) mrsaddr |= MRS_BL8; /* Apply NOP */ - PRINTK_DEBUG("Apply NOP\r\n"); + PRINTK_DEBUG("Apply NOP\n"); do_ram_command(RAM_COMMAND_NOP); ram_read32(bankaddr); /* Precharge all banks */ - PRINTK_DEBUG("All Banks Precharge\r\n"); + PRINTK_DEBUG("All Banks Precharge\n"); do_ram_command(RAM_COMMAND_PRECHARGE); ram_read32(bankaddr); /* Extended Mode Register Set (2) */ - PRINTK_DEBUG("Extended Mode Register Set(2)\r\n"); + PRINTK_DEBUG("Extended Mode Register Set(2)\n"); do_ram_command(RAM_COMMAND_EMRS | RAM_EMRS_2); ram_read32(bankaddr); /* Extended Mode Register Set (3) */ - PRINTK_DEBUG("Extended Mode Register Set(3)\r\n"); + PRINTK_DEBUG("Extended Mode Register Set(3)\n"); do_ram_command(RAM_COMMAND_EMRS | RAM_EMRS_3); ram_read32(bankaddr); /* Extended Mode Register Set */ - PRINTK_DEBUG("Extended Mode Register Set\r\n"); + PRINTK_DEBUG("Extended Mode Register Set\n"); do_ram_command(RAM_COMMAND_EMRS | RAM_EMRS_1); tmpaddr = bankaddr; if (!sdram_capabilities_dual_channel()) { @@ -2558,7 +2562,7 @@ static void sdram_jedec_enable(struct sys_info *sysinfo) ram_read32(tmpaddr); /* Mode Register Set: Reset DLLs */ - PRINTK_DEBUG("MRS: Reset DLLs\r\n"); + PRINTK_DEBUG("MRS: Reset DLLs\n"); do_ram_command(RAM_COMMAND_MRS); tmpaddr = bankaddr; tmpaddr |= mrsaddr; @@ -2570,12 +2574,12 @@ static void sdram_jedec_enable(struct sys_info *sysinfo) ram_read32(tmpaddr); /* Precharge all banks */ - PRINTK_DEBUG("All Banks Precharge\r\n"); + PRINTK_DEBUG("All Banks Precharge\n"); do_ram_command(RAM_COMMAND_PRECHARGE); ram_read32(bankaddr); /* CAS before RAS Refresh */ - PRINTK_DEBUG("CAS before RAS\r\n"); + PRINTK_DEBUG("CAS before RAS\n"); do_ram_command(RAM_COMMAND_CBR); /* CBR wants two READs */ @@ -2583,7 +2587,7 @@ static void sdram_jedec_enable(struct sys_info *sysinfo) ram_read32(bankaddr); /* Mode Register Set: Enable DLLs */ - PRINTK_DEBUG("MRS: Enable DLLs\r\n"); + PRINTK_DEBUG("MRS: Enable DLLs\n"); do_ram_command(RAM_COMMAND_MRS); tmpaddr = bankaddr; @@ -2591,7 +2595,7 @@ static void sdram_jedec_enable(struct sys_info *sysinfo) ram_read32(tmpaddr); /* Extended Mode Register Set */ - PRINTK_DEBUG("Extended Mode Register Set: ODT/OCD\r\n"); + PRINTK_DEBUG("Extended Mode Register Set: ODT/OCD\n"); do_ram_command(RAM_COMMAND_EMRS | RAM_EMRS_1); tmpaddr = bankaddr; @@ -2606,7 +2610,7 @@ static void sdram_jedec_enable(struct sys_info *sysinfo) ram_read32(tmpaddr); /* Extended Mode Register Set */ - PRINTK_DEBUG("Extended Mode Register Set: OCD Exit\r\n"); + PRINTK_DEBUG("Extended Mode Register Set: OCD Exit\n"); do_ram_command(RAM_COMMAND_EMRS | RAM_EMRS_1); tmpaddr = bankaddr; @@ -2623,7 +2627,7 @@ static void sdram_jedec_enable(struct sys_info *sysinfo) static void sdram_init_complete(void) { - PRINTK_DEBUG("Normal Operation\r\n"); + PRINTK_DEBUG("Normal Operation\n"); do_ram_command(RAM_COMMAND_NORMAL); } @@ -2651,7 +2655,7 @@ void sdram_initialize(int boot_mode) sdram_detect_errors(); - printk_debug ("Setting up RAM controller.\r\n"); + printk_debug ("Setting up RAM controller.\n"); memset(&sysinfo, 0, sizeof(sysinfo)); @@ -2772,7 +2776,7 @@ void sdram_initialize(int boot_mode) reg8 &= ~(1 << 7); pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa2, reg8); - printk_debug("RAM initialization finished.\r\n"); + printk_debug("RAM initialization finished.\n"); sdram_setup_processor_side(); } diff --git a/src/northbridge/intel/i945/rcven.c b/src/northbridge/intel/i945/rcven.c index e7eea611f2..47b4da7c8a 100644 --- a/src/northbridge/intel/i945/rcven.c +++ b/src/northbridge/intel/i945/rcven.c @@ -67,7 +67,7 @@ static void set_receive_enable(int channel_offset, u8 medium, u8 coarse) { u32 reg32; - printk_spew(" set_receive_enable() medium=0x%x, coarse=0x%x\r\n", medium, coarse); + printk_spew(" set_receive_enable() medium=0x%x, coarse=0x%x\n", medium, coarse); reg32 = MCHBAR32(C0DRT1 + channel_offset); reg32 &= 0xf0ffffff; @@ -101,7 +101,7 @@ static void set_receive_enable(int channel_offset, u8 medium, u8 coarse) static int normalize(int channel_offset, u8 * mediumcoarse, u8 * fine) { - printk_spew(" normalize()\r\n"); + printk_spew(" normalize()\n"); if (*fine < 0x80) return 0; @@ -110,7 +110,7 @@ static int normalize(int channel_offset, u8 * mediumcoarse, u8 * fine) *mediumcoarse += 1; if (*mediumcoarse >= 0x40) { - printk_debug("Normalize Error\r\n"); + printk_debug("Normalize Error\n"); return -1; } @@ -128,12 +128,12 @@ static int find_preamble(int channel_offset, u8 * mediumcoarse, /* find start of the data phase */ u32 reg32; - printk_spew(" find_preamble()\r\n"); + printk_spew(" find_preamble()\n"); do { if (*mediumcoarse < 4) { - printk_debug("No Preamble found.\r\n"); + printk_debug("No Preamble found.\n"); return -1; } *mediumcoarse -= 4; @@ -147,7 +147,7 @@ static int find_preamble(int channel_offset, u8 * mediumcoarse, if (!(reg32 & (1 << 18))) { - printk_debug("No Preamble found (neither high nor low).\r\n"); + printk_debug("No Preamble found (neither high nor low).\n"); return -1; } @@ -160,14 +160,14 @@ static int find_preamble(int channel_offset, u8 * mediumcoarse, static int add_quarter_clock(int channel_offset, u8 * mediumcoarse, u8 * fine) { - printk_spew(" add_quarter_clock() mediumcoarse=%02x fine=%02x\r\n", + printk_spew(" add_quarter_clock() mediumcoarse=%02x fine=%02x\n", *mediumcoarse, *fine); if (*fine >= 0x80) { *fine -= 0x80; *mediumcoarse += 2; if (*mediumcoarse >= 0x40) { - printk_debug("clocks at max.\r\n"); + printk_debug("clocks at max.\n"); return -1; } @@ -187,7 +187,7 @@ static int find_strobes_low(int channel_offset, u8 * mediumcoarse, u8 * fine, { u32 rcvenmt; - printk_spew(" find_strobes_low()\r\n"); + printk_spew(" find_strobes_low()\n"); for (;;) { MCHBAR8(C0WL0REOST + channel_offset) = *fine; @@ -213,7 +213,7 @@ static int find_strobes_low(int channel_offset, u8 * mediumcoarse, u8 * fine, } - printk_debug("Could not find low strobe\r\n"); + printk_debug("Could not find low strobe\n"); return 0; } @@ -223,7 +223,7 @@ static int find_strobes_edge(int channel_offset, u8 * mediumcoarse, u8 * fine, int counter; u32 rcvenmt; - printk_spew(" find_strobes_edge()\r\n"); + printk_spew(" find_strobes_edge()\n"); counter = 8; set_receive_enable(channel_offset, *mediumcoarse & 3, @@ -258,7 +258,7 @@ static int find_strobes_edge(int channel_offset, u8 * mediumcoarse, u8 * fine, continue; } - printk_debug("could not find rising edge.\r\n"); + printk_debug("could not find rising edge.\n"); return -1; } @@ -287,7 +287,7 @@ static int receive_enable_autoconfig(int channel_offset, u8 mediumcoarse; u8 fine; - printk_spew("receive_enable_autoconfig() for channel %d\r\n", + printk_spew("receive_enable_autoconfig() for channel %d\n", channel_offset ? 1 : 0); /* Set initial values */