GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

rockchip/rk3399: Add code to neuter Type-C PHY for firmware USB 

The Rockchip RK3399 integrates a USB Type-C PHY in charge of things like
SuperSpeed line muxing for rotated cable orientations in the SoC. While
fancy, this is very complicated and we don't want to implement support
for the whole thing in firmware. The USB Type-C standard has
intentionally been designed in a way that the USB 2.0 (HighSpeed) lines
always "just work" in any orientation (by just shorting different pins
in the connector together) so that simple use cases like ours can get
basic USB functionality without much hassle.

However, a semi-configured Type-C PHY can confuse USB 3.0 capable
devices into thinking we're actually supporting SuperSpeed, and fail at
that rather than establishing a reliable HighSpeed connection. This
patch sets enough bits in the Type-C PHY to electrically isolate the
SuperSpeed lines from the connector so that the connected device isn't
going to get any fancy ideas and reliably falls back to USB 2.0.

Also clean up the rest of the USB code while we're at it: avoid writing
a few bits that are already in the right state from their reset values
anyway, or reading values whose content we already know for this SoC.
Rename the USB controllers to the name actually used in the Rockchip
documentation (USB OTGx) rather than the name blindly copied from
Exynos code (USB DRDx).

BRANCH=None
BUG=chrome-os-partner:54621
TEST=Plug a USB 3.0 Patriot Memory stick into both ports in all
orientations, observe how it gets reliably detected now (safe for some
known hardware issues on my board).

Change-Id: Ifce6bcddd69f2e8f2e2a2f48faf65551e084da1e
Signed-off-by: Martin Roth <martinroth@chromium.org>
Original-Commit-Id: c526906f998bf66067d3addb8b3d3a126c188b1e
Original-Change-Id: Ie80a201a58764c4d851fe4a5098a5acfc4bcebdf
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/366160
Original-Reviewed-by: liangfeng wu <wulf@rock-chips.com>
Original-Reviewed-by: Shelley Chen <shchen@chromium.org>
Original-Reviewed-by: <515506667@qq.com>
Reviewed-on: https://review.coreboot.org/16125
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
This commit is contained in:
Julius Werner 2016-08-03 19:18:39 -07:00 committed by Martin Roth
parent 1394bba6bb
commit 785ff1b7db
5 changed files with 89 additions and 77 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
src/mainboard/google/gru/mainboard.c
View File

@ -164,8 +164,8 @@ static void configure_display(void)
static void setup_usb(void)
{
setup_usb_drd0_dwc3();
setup_usb_drd1_dwc3();
setup_usb_otg0();
setup_usb_otg1();
}
static void setup_rtc(void)

6
src/soc/rockchip/rk3399/include/soc/addressmap.h
View File

@ -70,8 +70,10 @@
#define DDRC1_BASE_ADDR 0xffa88000
#define SERVER_MSCH1_BASE_ADDR 0xffa8c000
#define USB_DRD0_DWC3_BASE 0xfe80c100
#define USB_DRD1_DWC3_BASE 0xfe90c100
#define USB_OTG0_DWC3_BASE 0xfe80c100
#define USB_OTG1_DWC3_BASE 0xfe90c100
#define USB_OTG0_TCPHY_BASE 0xff7c0000
#define USB_OTG1_TCPHY_BASE 0xff800000
#define IC_BASES { I2C0_BASE, I2C1_BASE, I2C2_BASE, I2C3_BASE, \
I2C4_BASE, I2C5_BASE, I2C6_BASE, I2C7_BASE, I2C8_BASE }

36
src/soc/rockchip/rk3399/include/soc/usb.h
View File

@ -32,11 +32,10 @@
#define DWC3_GCTL_CLK_PIPE (1)
#define DWC3_GCTL_CLK_PIPEHALF (2)
#define DWC3_GCTL_CLK_MASK (3)
#define DWC3_GCTL_PRTCAP(n) (((n) & (3 << 12)) >> 12)
#define DWC3_GCTL_PRTCAPDIR(n) ((n) << 12)
#define DWC3_GCTL_PRTCAP_HOST 1
#define DWC3_GCTL_PRTCAP_DEVICE 2
#define DWC3_GCTL_PRTCAP_OTG 3
#define DWC3_GCTL_PRTCAP_MASK (3 << 12)
#define DWC3_GCTL_PRTCAP_HOST (1 << 12)
#define DWC3_GCTL_PRTCAP_DEVICE (2 << 12)
#define DWC3_GCTL_PRTCAP_OTG (3 << 12)
#define DWC3_GCTL_CORESOFTRESET (1 << 11)
#define DWC3_GCTL_SCALEDOWN(n) ((n) << 4)
#define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3)
@ -63,7 +62,7 @@
#define DWC3_GUSB3PIPECTL_PHYSOFTRST (1 << 31)
#define DWC3_GUSB3PIPECTL_SUSPHY (1 << 17)
struct rockchip_usb_drd_dwc3 {
struct rockchip_usb_dwc3 {
uint32_t sbuscfg0;
uint32_t sbuscfg1;
uint32_t txthrcfg;
@ -107,15 +106,22 @@ struct rockchip_usb_drd_dwc3 {
uint8_t reserved6[60];
};
static struct rockchip_usb_drd_dwc3 * const rockchip_usb_drd0_dwc3 =
(void *)USB_DRD0_DWC3_BASE;
static struct rockchip_usb_drd_dwc3 * const rockchip_usb_drd1_dwc3 =
(void *)USB_DRD1_DWC3_BASE;
static struct rockchip_usb_dwc3 * const rockchip_usb_otg0_dwc3 =
(void *)USB_OTG0_DWC3_BASE;
static struct rockchip_usb_dwc3 * const rockchip_usb_otg1_dwc3 =
(void *)USB_OTG1_DWC3_BASE;
/* Call reset _ before setup_ */
void reset_usb_drd0_dwc3(void);
void reset_usb_drd1_dwc3(void);
void setup_usb_drd0_dwc3(void);
void setup_usb_drd1_dwc3(void);
/* TODO: define struct overlay if we ever need more registers from this */
#define TCPHY_ISOLATION_CTRL_OFFSET 0x3207c
#define TCPHY_ISOLATION_CTRL_EN (1 << 15)
#define TCPHY_ISOLATION_CTRL_CMN_EN (1 << 14)
#define TCPHY_ISOLATION_CTRL_MODE_SEL (1 << 12)
#define TCPHY_ISOLATION_CTRL_LN_EN(ln) (1 << (ln))
/* Call reset_ before setup_ */
void reset_usb_otg0(void);
void reset_usb_otg1(void);
void setup_usb_otg0(void);
void setup_usb_otg1(void);
#endif /* __SOC_ROCKCHIP_RK3399_USB_H_ */

4
src/soc/rockchip/rk3399/romstage.c
View File

@ -97,8 +97,8 @@ static void prepare_usb(void)
* Do dwc3 core soft reset and phy reset. Kick these resets
* off early so they get at least 100ms to settle.
*/
reset_usb_drd0_dwc3();
reset_usb_drd1_dwc3();
reset_usb_otg0();
reset_usb_otg1();
}
void main(void)

116
src/soc/rockchip/rk3399/usb.c
View File

@ -14,57 +14,58 @@
*/
#include <arch/io.h>
#include <assert.h>
#include <console/console.h>
#include <delay.h>
#include <soc/usb.h>
static void reset_dwc3(struct rockchip_usb_drd_dwc3 *dwc3_reg)
/* SuperSpeed over Type-C is hard. We don't care about speed in firmware: just
* gate off the SuperSpeed lines to have an unimpaired USB 2.0 connection. */
static void isolate_tcphy(uintptr_t base)
{
/* Before Resetting PHY, put Core in Reset */
setbits_le32(&dwc3_reg->ctl, DWC3_GCTL_CORESOFTRESET);
/* Assert USB3 PHY reset */
setbits_le32(&dwc3_reg->usb3pipectl, DWC3_GUSB3PIPECTL_PHYSOFTRST);
/* Assert USB2 PHY reset */
setbits_le32(&dwc3_reg->usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
write32((void *)(base + TCPHY_ISOLATION_CTRL_OFFSET),
TCPHY_ISOLATION_CTRL_EN |
TCPHY_ISOLATION_CTRL_CMN_EN |
TCPHY_ISOLATION_CTRL_MODE_SEL |
TCPHY_ISOLATION_CTRL_LN_EN(7) |
TCPHY_ISOLATION_CTRL_LN_EN(6) |
TCPHY_ISOLATION_CTRL_LN_EN(5) |
TCPHY_ISOLATION_CTRL_LN_EN(4) |
TCPHY_ISOLATION_CTRL_LN_EN(3) |
TCPHY_ISOLATION_CTRL_LN_EN(2) |
TCPHY_ISOLATION_CTRL_LN_EN(1) |
TCPHY_ISOLATION_CTRL_LN_EN(0));
}
static void setup_dwc3(struct rockchip_usb_drd_dwc3 *dwc3_reg)
static void reset_dwc3(struct rockchip_usb_dwc3 *dwc3)
{
u32 reg;
u32 revision;
u32 dwc3_hwparams1;
/* Before Resetting PHY, put Core in Reset */
setbits_le32(&dwc3->ctl, DWC3_GCTL_CORESOFTRESET);
/* Assert USB3 PHY reset */
setbits_le32(&dwc3->usb3pipectl, DWC3_GUSB3PIPECTL_PHYSOFTRST);
/* Assert USB2 PHY reset */
setbits_le32(&dwc3->usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
}
/* Clear USB3 PHY reset */
clrbits_le32(&dwc3_reg->usb3pipectl, DWC3_GUSB3PIPECTL_PHYSOFTRST);
/* Clear USB2 PHY reset */
clrbits_le32(&dwc3_reg->usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST);
/* After PHYs are stable we can take Core out of reset state */
clrbits_le32(&dwc3_reg->ctl, DWC3_GCTL_CORESOFTRESET);
static void setup_dwc3(struct rockchip_usb_dwc3 *dwc3)
{
u32 usb2phycfg = read32(&dwc3->usb2phycfg);
u32 ctl = read32(&dwc3->ctl);
revision = read32(&dwc3_reg->snpsid);
/* This should read as U3 followed by revision number */
if ((revision & DWC3_GSNPSID_MASK) != 0x55330000) {
printk(BIOS_ERR, "ERROR: not a DesignWare USB3 DRD Core\n");
return;
}
/* Ensure reset_dwc3() has been called before this. */
assert(ctl & DWC3_GCTL_CORESOFTRESET);
dwc3_hwparams1 = read32(&dwc3_reg->hwparams1);
/* Clear USB3 PHY reset (oddly enough, this is really necessary). */
clrbits_le32(&dwc3->usb3pipectl, DWC3_GUSB3PIPECTL_PHYSOFTRST);
reg = read32(&dwc3_reg->ctl);
reg &= ~DWC3_GCTL_SCALEDOWN_MASK;
reg &= ~DWC3_GCTL_DISSCRAMBLE;
if (DWC3_GHWPARAMS1_EN_PWROPT(dwc3_hwparams1) ==
DWC3_GHWPARAMS1_EN_PWROPT_CLK)
reg &= ~DWC3_GCTL_DSBLCLKGTNG;
else
printk(BIOS_DEBUG, "No power optimization available\n");
write32(&dwc3_reg->ctl, reg);
/* Clear USB2 PHY and core reset. */
usb2phycfg &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST;
ctl &= ~DWC3_GCTL_CORESOFTRESET;
/* We are hard-coding DWC3 core to Host Mode */
clrsetbits_le32(&dwc3_reg->ctl,
DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG),
DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_HOST));
ctl &= ~DWC3_GCTL_PRTCAP_MASK;
ctl |= DWC3_GCTL_PRTCAP_HOST;
/*
* Configure USB phy interface of DWC3 core.
* For Rockchip rk3399 SOC DWC3 core:
@ -73,35 +74,38 @@ static void setup_dwc3(struct rockchip_usb_drd_dwc3 *dwc3_reg)
* 3. Set USBTRDTIM to the corresponding value
* according to the UTMI+ PHY interface.
*/
reg = read32(&dwc3_reg->usb2phycfg);
reg &= ~(DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS |
DWC3_GUSB2PHYCFG_USB2TRDTIM_MASK |
DWC3_GUSB2PHYCFG_PHYIF_MASK);
reg |= DWC3_GUSB2PHYCFG_PHYIF(1) |
DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);
write32(&dwc3_reg->usb2phycfg, reg);
usb2phycfg &= ~(DWC3_GUSB2PHYCFG_U2_FREECLK_EXISTS |
DWC3_GUSB2PHYCFG_USB2TRDTIM_MASK |
DWC3_GUSB2PHYCFG_PHYIF_MASK);
usb2phycfg |= DWC3_GUSB2PHYCFG_PHYIF(1) |
DWC3_GUSB2PHYCFG_USBTRDTIM(USBTRDTIM_UTMI_16_BIT);
write32(&dwc3->usb2phycfg, usb2phycfg);
write32(&dwc3->ctl, ctl);
}
void reset_usb_drd0_dwc3(void)
void reset_usb_otg0(void)
{
printk(BIOS_DEBUG, "Starting DWC3 reset for USB DRD0\n");
reset_dwc3(rockchip_usb_drd0_dwc3);
printk(BIOS_DEBUG, "Starting DWC3 reset for USB OTG0\n");
reset_dwc3(rockchip_usb_otg0_dwc3);
}
void reset_usb_drd1_dwc3(void)
void reset_usb_otg1(void)
{
printk(BIOS_DEBUG, "Starting DWC3 reset for USB DRD1\n");
reset_dwc3(rockchip_usb_drd1_dwc3);
printk(BIOS_DEBUG, "Starting DWC3 reset for USB OTG1\n");
reset_dwc3(rockchip_usb_otg1_dwc3);
}
void setup_usb_drd0_dwc3(void)
void setup_usb_otg0(void)
{
setup_dwc3(rockchip_usb_drd0_dwc3);
printk(BIOS_DEBUG, "DWC3 setup for USB DRD0 finished\n");
isolate_tcphy(USB_OTG0_TCPHY_BASE);
setup_dwc3(rockchip_usb_otg0_dwc3);
printk(BIOS_DEBUG, "DWC3 setup for USB OTG0 finished\n");
}
void setup_usb_drd1_dwc3(void)
void setup_usb_otg1(void)
{
setup_dwc3(rockchip_usb_drd1_dwc3);
printk(BIOS_DEBUG, "DWC3 setup for USB DRD1 finished\n");
isolate_tcphy(USB_OTG1_TCPHY_BASE);
setup_dwc3(rockchip_usb_otg1_dwc3);
printk(BIOS_DEBUG, "DWC3 setup for USB OTG1 finished\n");
}