mb/google/volteer: Update collis device tree

Update device tree override to match schematics.

BUG=b:182227204
TEST=emerge-volteer coreboot

Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ib1698504cc0b377659fa60b4fae25227b5823753
Reviewed-on: https://review.coreboot.org/c/coreboot/+/51743
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This commit is contained in:
FrankChu 2021-03-23 18:32:22 +08:00 committed by Nick Vaccaro
parent 6943ada500
commit 79a72c4c4b
1 changed files with 250 additions and 1 deletions

View File

@ -1,6 +1,255 @@
chip soc/intel/tigerlake chip soc/intel/tigerlake
# BitMask where bits [3:0] are Controller 0 Channel [3:0] and
# bits [7:4] are Controller 1 Channel [3:0].
# Enable Command Mirroring for controller 0 channel 0 and 1,
# and controller 1 channel 0 and 1.
register "CmdMirror" = "0x00000033"
register "DdiPort1Hpd" = "0"
register "DdiPort2Hpd" = "0"
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC1)" # Type-A Port A0
register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC2)" # Type-A Port A1
register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port C1
register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Front Camera
register "usb2_ports[4]" = "USB2_PORT_TYPE_C(OC3)" # Type-C Port C0
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # WFC Camera
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # USB3/2 Type-A Port A0
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # USB3/2 Type-A Port A1
# Disable SRCCLKREQ1#
register "PcieClkSrcUsage[1]" = "PCIE_CLK_NOTUSED"
#+-------------------+---------------------------+
#| Field | Value |
#+-------------------+---------------------------+
#| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT |
#| GSPI0 | cr50 TPM. Early init is |
#| | required to set up a BAR |
#| | for TPM communication |
#| | before memory is up |
#| I2C0 | Audio |
#| I2C1 | Touchscreen |
#| I2C5 | Trackpad |
#+-------------------+---------------------------+
register "common_soc_config" = "{
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
.gspi[0] = {
.speed_mhz = 1,
.early_init = 1,
},
.i2c[0] = {
.speed = I2C_SPEED_FAST,
},
.i2c[1] = {
.speed = I2C_SPEED_FAST,
},
.i2c[5] = {
.speed = I2C_SPEED_FAST,
},
}"
device domain 0 on device domain 0 on
device ref i2c0 on
chip drivers/i2c/generic
register "hid" = ""10EC5682""
register "name" = ""RT58""
register "desc" = ""Headset Codec""
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_R5)"
# Set the jd_src to RT5668_JD1 for jack detection
register "property_count" = "1"
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
register "property_list[0].name" = ""realtek,jd-src""
register "property_list[0].integer" = "1"
device i2c 1a on
end
end
chip drivers/i2c/max98373
register "vmon_slot_no" = "0"
register "imon_slot_no" = "1"
register "uid" = "0"
register "desc" = ""Right Speaker Amp""
register "name" = ""MAXR""
device i2c 31 on
probe AUDIO MAX98373_ALC5682I_I2S_UP4
end
end
chip drivers/i2c/max98373
register "vmon_slot_no" = "2"
register "imon_slot_no" = "3"
register "uid" = "1"
register "desc" = ""Left Speaker Amp""
register "name" = ""MAXL""
device i2c 32 on
probe AUDIO MAX98373_ALC5682I_I2S_UP4
end
end
end
device ref i2c1 on
chip drivers/i2c/hid
register "generic.hid" = ""ELAN9008""
register "generic.desc" = ""ELAN Touchscreen""
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
register "generic.probed" = "1"
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F16)"
register "generic.reset_delay_ms" = "20"
register "generic.has_power_resource" = "1"
register "generic.disable_gpio_export_in_crs" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 10 on end
end
chip drivers/generic/gpio_keys
register "name" = ""PENH""
# GPP_E17 is the IRQ source, and GPP_E1 is the wake source
register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_E17)"
register "key.wake_gpe" = "GPE0_DW2_01"
register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
register "key.dev_name" = ""EJCT""
register "key.linux_code" = "SW_PEN_INSERTED"
register "key.linux_input_type" = "EV_SW"
register "key.label" = ""pen_eject""
device generic 0 on end
end
end
device ref i2c5 on
chip drivers/i2c/generic
register "hid" = ""ELAN0000""
register "desc" = ""ELAN Touchpad""
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
register "wake" = "GPE0_DW2_15"
register "probed" = "1"
device i2c 15 on
probe TOUCHPAD REGULAR_TOUCHPAD
end
end
chip drivers/i2c/hid
register "generic.hid" = ""ELAN2702""
register "generic.desc" = ""ELAN Touchpad""
register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
register "generic.wake" = "GPE0_DW2_15"
register "generic.probed" = "1"
register "hid_desc_reg_offset" = "0x01"
device i2c 15 on
probe TOUCHPAD NUMPAD_TOUCHPAD
end
end
end
device ref pch_espi on
chip ec/google/chromeec
use conn0 as mux_conn[0]
use conn1 as mux_conn[1]
device pnp 0c09.0 on end
end
end
device ref pcie_rp9 on
chip soc/intel/common/block/pcie/rtd3
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)"
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
register "srcclk_pin" = "0"
device generic 0 on end
end
end
device ref pmc hidden
# The pmc_mux chip driver is a placeholder for the
# PMC.MUX device in the ACPI hierarchy.
chip drivers/intel/pmc_mux
device generic 0 on
chip drivers/intel/pmc_mux/conn
register "usb2_port_number" = "5"
register "usb3_port_number" = "1"
# SBU is fixed, HSL follows CC
register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
device generic 0 alias conn0 on end
end
chip drivers/intel/pmc_mux/conn
register "usb2_port_number" = "3"
register "usb3_port_number" = "2"
# SBU is fixed, HSL follows CC
register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
device generic 1 alias conn1 on end
end
end
end
end
device ref north_xhci on
chip drivers/usb/acpi
device ref tcss_root_hub on
chip drivers/usb/acpi
register "desc" = ""USB3 Type-C Port C0 (MLB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(4, 2)"
device ref tcss_usb3_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-C Port C1 (DB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(3, 2)"
device ref tcss_usb3_port2 on
probe DB_USB USB3_ACTIVE
end
end
end
end
end
device ref south_xhci on
chip drivers/usb/acpi
device ref xhci_root_hub on
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Port A0 (MLB)""
register "type" = "UPC_TYPE_A"
register "group" = "ACPI_PLD_GROUP(1, 1)"
device ref usb2_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-A Port A1 (DB)""
register "type" = "UPC_TYPE_A"
register "group" = "ACPI_PLD_GROUP(2, 1)"
device ref usb2_port2 on
probe DB_USB USB3_ACTIVE
end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-C Port C1 (DB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(3, 1)"
device ref usb2_port3 on
probe DB_USB USB3_ACTIVE
end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Camera""
register "type" = "UPC_TYPE_INTERNAL"
device ref usb2_port4 on end
end
chip drivers/usb/acpi
register "desc" = ""USB2 Type-C Port C0 (MLB)""
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
register "group" = "ACPI_PLD_GROUP(4, 1)"
device ref usb2_port5 on end
end
chip drivers/usb/acpi
register "desc" = ""WFC Camera""
register "type" = "UPC_TYPE_INTERNAL"
device ref usb2_port6 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Port A0 (MLB)""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(1, 2)"
device ref usb3_port1 on end
end
chip drivers/usb/acpi
register "desc" = ""USB3 Type-A Port A1 (DB)""
register "type" = "UPC_TYPE_USB3_A"
register "group" = "ACPI_PLD_GROUP(2, 2)"
device ref usb3_port2 on
probe DB_USB USB3_ACTIVE
end
end
end
end
end
end end
end end