mb/google/volteer: Update collis device tree
Update device tree override to match schematics. BUG=b:182227204 TEST=emerge-volteer coreboot Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: Ib1698504cc0b377659fa60b4fae25227b5823753 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
This commit is contained in:
FrankChu
Nick Vaccaro
parent
6943ada500
commit
79a72c4c4b
|
|
@ -1,6 +1,255 @@
|
|||
chip soc/intel/tigerlake
|
||||
# BitMask where bits [3:0] are Controller 0 Channel [3:0] and
|
||||
# bits [7:4] are Controller 1 Channel [3:0].
|
||||
# Enable Command Mirroring for controller 0 channel 0 and 1,
|
||||
# and controller 1 channel 0 and 1.
|
||||
register "CmdMirror" = "0x00000033"
|
||||
|
||||
register "DdiPort1Hpd" = "0"
|
||||
register "DdiPort2Hpd" = "0"
|
||||
|
||||
register "usb2_ports[0]" = "USB2_PORT_TYPE_C(OC1)" # Type-A Port A0
|
||||
register "usb2_ports[1]" = "USB2_PORT_TYPE_C(OC2)" # Type-A Port A1
|
||||
register "usb2_ports[2]" = "USB2_PORT_TYPE_C(OC0)" # Type-C Port C1
|
||||
register "usb2_ports[3]" = "USB2_PORT_MID(OC_SKIP)" # Front Camera
|
||||
register "usb2_ports[4]" = "USB2_PORT_TYPE_C(OC3)" # Type-C Port C0
|
||||
register "usb2_ports[5]" = "USB2_PORT_MID(OC_SKIP)" # WFC Camera
|
||||
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC1)" # USB3/2 Type-A Port A0
|
||||
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC2)" # USB3/2 Type-A Port A1
|
||||
|
||||
# Disable SRCCLKREQ1#
|
||||
register "PcieClkSrcUsage[1]" = "PCIE_CLK_NOTUSED"
|
||||
|
||||
#+-------------------+---------------------------+
|
||||
#| Field | Value |
|
||||
#+-------------------+---------------------------+
|
||||
#| chipset_lockdown | CHIPSET_LOCKDOWN_COREBOOT |
|
||||
#| GSPI0 | cr50 TPM. Early init is |
|
||||
#| | required to set up a BAR |
|
||||
#| | for TPM communication |
|
||||
#| | before memory is up |
|
||||
#| I2C0 | Audio |
|
||||
#| I2C1 | Touchscreen |
|
||||
#| I2C5 | Trackpad |
|
||||
#+-------------------+---------------------------+
|
||||
register "common_soc_config" = "{
|
||||
.chipset_lockdown = CHIPSET_LOCKDOWN_COREBOOT,
|
||||
.gspi[0] = {
|
||||
.speed_mhz = 1,
|
||||
.early_init = 1,
|
||||
},
|
||||
.i2c[0] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[1] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
.i2c[5] = {
|
||||
.speed = I2C_SPEED_FAST,
|
||||
},
|
||||
}"
|
||||
|
||||
device domain 0 on
|
||||
device ref i2c0 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""10EC5682""
|
||||
register "name" = ""RT58""
|
||||
register "desc" = ""Headset Codec""
|
||||
register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_R5)"
|
||||
# Set the jd_src to RT5668_JD1 for jack detection
|
||||
register "property_count" = "1"
|
||||
register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
|
||||
register "property_list[0].name" = ""realtek,jd-src""
|
||||
register "property_list[0].integer" = "1"
|
||||
device i2c 1a on
|
||||
end
|
||||
end
|
||||
chip drivers/i2c/max98373
|
||||
register "vmon_slot_no" = "0"
|
||||
register "imon_slot_no" = "1"
|
||||
register "uid" = "0"
|
||||
register "desc" = ""Right Speaker Amp""
|
||||
register "name" = ""MAXR""
|
||||
device i2c 31 on
|
||||
probe AUDIO MAX98373_ALC5682I_I2S_UP4
|
||||
end
|
||||
end
|
||||
chip drivers/i2c/max98373
|
||||
register "vmon_slot_no" = "2"
|
||||
register "imon_slot_no" = "3"
|
||||
register "uid" = "1"
|
||||
register "desc" = ""Left Speaker Amp""
|
||||
register "name" = ""MAXL""
|
||||
device i2c 32 on
|
||||
probe AUDIO MAX98373_ALC5682I_I2S_UP4
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref i2c1 on
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""ELAN9008""
|
||||
register "generic.desc" = ""ELAN Touchscreen""
|
||||
register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_E7_IRQ)"
|
||||
register "generic.probed" = "1"
|
||||
register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C10)"
|
||||
register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_F16)"
|
||||
register "generic.reset_delay_ms" = "20"
|
||||
register "generic.has_power_resource" = "1"
|
||||
register "generic.disable_gpio_export_in_crs" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 10 on end
|
||||
end
|
||||
chip drivers/generic/gpio_keys
|
||||
register "name" = ""PENH""
|
||||
# GPP_E17 is the IRQ source, and GPP_E1 is the wake source
|
||||
register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_E17)"
|
||||
register "key.wake_gpe" = "GPE0_DW2_01"
|
||||
register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
|
||||
register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
|
||||
register "key.dev_name" = ""EJCT""
|
||||
register "key.linux_code" = "SW_PEN_INSERTED"
|
||||
register "key.linux_input_type" = "EV_SW"
|
||||
register "key.label" = ""pen_eject""
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref i2c5 on
|
||||
chip drivers/i2c/generic
|
||||
register "hid" = ""ELAN0000""
|
||||
register "desc" = ""ELAN Touchpad""
|
||||
register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
|
||||
register "wake" = "GPE0_DW2_15"
|
||||
register "probed" = "1"
|
||||
device i2c 15 on
|
||||
probe TOUCHPAD REGULAR_TOUCHPAD
|
||||
end
|
||||
end
|
||||
chip drivers/i2c/hid
|
||||
register "generic.hid" = ""ELAN2702""
|
||||
register "generic.desc" = ""ELAN Touchpad""
|
||||
register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_E15_IRQ)"
|
||||
register "generic.wake" = "GPE0_DW2_15"
|
||||
register "generic.probed" = "1"
|
||||
register "hid_desc_reg_offset" = "0x01"
|
||||
device i2c 15 on
|
||||
probe TOUCHPAD NUMPAD_TOUCHPAD
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref pch_espi on
|
||||
chip ec/google/chromeec
|
||||
use conn0 as mux_conn[0]
|
||||
use conn1 as mux_conn[1]
|
||||
device pnp 0c09.0 on end
|
||||
end
|
||||
end
|
||||
device ref pcie_rp9 on
|
||||
chip soc/intel/common/block/pcie/rtd3
|
||||
register "enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_B2)"
|
||||
register "reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_A11)"
|
||||
register "srcclk_pin" = "0"
|
||||
device generic 0 on end
|
||||
end
|
||||
end
|
||||
device ref pmc hidden
|
||||
# The pmc_mux chip driver is a placeholder for the
|
||||
# PMC.MUX device in the ACPI hierarchy.
|
||||
chip drivers/intel/pmc_mux
|
||||
device generic 0 on
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
register "usb2_port_number" = "5"
|
||||
register "usb3_port_number" = "1"
|
||||
# SBU is fixed, HSL follows CC
|
||||
register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
|
||||
device generic 0 alias conn0 on end
|
||||
end
|
||||
chip drivers/intel/pmc_mux/conn
|
||||
register "usb2_port_number" = "3"
|
||||
register "usb3_port_number" = "2"
|
||||
# SBU is fixed, HSL follows CC
|
||||
register "sbu_orientation" = "TYPEC_ORIENTATION_NORMAL"
|
||||
device generic 1 alias conn1 on end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref north_xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref tcss_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "group" = "ACPI_PLD_GROUP(4, 2)"
|
||||
device ref tcss_usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-C Port C1 (DB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "group" = "ACPI_PLD_GROUP(3, 2)"
|
||||
device ref tcss_usb3_port2 on
|
||||
probe DB_USB USB3_ACTIVE
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
device ref south_xhci on
|
||||
chip drivers/usb/acpi
|
||||
device ref xhci_root_hub on
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A0 (MLB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 1)"
|
||||
device ref usb2_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-A Port A1 (DB)""
|
||||
register "type" = "UPC_TYPE_A"
|
||||
register "group" = "ACPI_PLD_GROUP(2, 1)"
|
||||
device ref usb2_port2 on
|
||||
probe DB_USB USB3_ACTIVE
|
||||
end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C1 (DB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "group" = "ACPI_PLD_GROUP(3, 1)"
|
||||
device ref usb2_port3 on
|
||||
probe DB_USB USB3_ACTIVE
|
||||
end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Camera""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port4 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB2 Type-C Port C0 (MLB)""
|
||||
register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
|
||||
register "group" = "ACPI_PLD_GROUP(4, 1)"
|
||||
device ref usb2_port5 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""WFC Camera""
|
||||
register "type" = "UPC_TYPE_INTERNAL"
|
||||
device ref usb2_port6 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A0 (MLB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "group" = "ACPI_PLD_GROUP(1, 2)"
|
||||
device ref usb3_port1 on end
|
||||
end
|
||||
chip drivers/usb/acpi
|
||||
register "desc" = ""USB3 Type-A Port A1 (DB)""
|
||||
register "type" = "UPC_TYPE_USB3_A"
|
||||
register "group" = "ACPI_PLD_GROUP(2, 2)"
|
||||
device ref usb3_port2 on
|
||||
probe DB_USB USB3_ACTIVE
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
end
|
||||
|
||||
end
|
||||
|
|
|
|||
Loading…
Reference in New Issue