i945/pineview/x4x/i82801gx: Use common code for early SMBus

The early SMBus code for this southbridge checked if the PCI device ID
is valid. However, we can't easily do that in common code, and we should
not attempt to do so either: if a SMBus device behaves differently, then
it should not be using the common code anyway.

Since this southbridge is used with two different northbridges, we need
to update both of them. Plus, x4x raminit no longer needs to know which
southbridge it is paired with, since both i82801gx and i82801jx use the
common early SMBus code, so we drop some preprocessor around includes.

Change-Id: Ic60a3f89bda6000fbe646461f05240c1b09db6e9
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42005
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
This commit is contained in:
Angel Pons 2020-06-01 22:23:57 +02:00
parent 53a343e65b
commit 7a2cb35262
3 changed files with 1 additions and 33 deletions

View File

@ -8,6 +8,7 @@ config SOUTHBRIDGE_INTEL_I82801GX
select HAVE_SMI_HANDLER
select SOUTHBRIDGE_INTEL_COMMON_GPIO
select SOUTHBRIDGE_INTEL_COMMON_SMBUS
select SOUTHBRIDGE_INTEL_COMMON_EARLY_SMBUS
select SOUTHBRIDGE_INTEL_COMMON_SPI_ICH7 if BOOT_DEVICE_SPI_FLASH
select SOUTHBRIDGE_INTEL_COMMON_PMCLIB
select SOUTHBRIDGE_INTEL_COMMON_PMBASE

View File

@ -23,7 +23,6 @@ ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/hda_verb.c
smm-y += smihandler.c
romstage-y += early_init.c
romstage-y += early_smbus.c
romstage-y += early_cir.c
endif

View File

@ -1,32 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-only */
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <device/smbus_host.h>
#include "i82801gx.h"
uintptr_t smbus_base(void)
{
return CONFIG_FIXED_SMBUS_IO_BASE;
}
int smbus_enable_iobar(uintptr_t base)
{
/* Set the SMBus device statically. */
const pci_devfn_t dev = PCI_DEV(0x0, 0x1f, 0x3);
/* Check to make sure we've got the right device. */
if (pci_read_config16(dev, PCI_DEVICE_ID) != 0x27da)
return -1;
/* Set SMBus I/O base. */
pci_write_config32(dev, SMB_BASE, base | PCI_BASE_ADDRESS_SPACE_IO);
/* Set SMBus enable. */
pci_write_config8(dev, HOSTC, HST_EN);
/* Set SMBus I/O space enable. */
pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO);
return 0;
}