intel/dcp847ske: Add Intel NUC DCP847SKE
https://ark.intel.com/products/71620/Intel-NUC-Board-DCP847SKE Created using autoport and manual edits. mainboard_fill_pei_data copied and adjusted from samsung/lumpy. Tested: - RAM slots with 2x4GB Kingston KVR1333D3S9/4G (DDR3-1333 1.5V). - RAM slots with 2x4GB Kingston KVR16LS11/4G (DDR3L-1600 1.35V). - SeaBIOS stable payload. - Linux 4.13.14 payload. - Booting into Linux 4.13.14 with Debian/unstable installed on the internal mSATA slot. - Non-native raminit (works). - Native raminit - KVR1333D3S9 doesn't work. - KVR16LS11 only works at 1.5V. - Native VGA init, HDMI port detection with libgfxinit. - Basic ACPI functions (power button event; power-off; reboot). - Suspend to RAM and resume works. - PCIe WLAN in half-minicard slot. - USB device in half-minicard slot. - PCIe device in full-minicard slot. - mSATA device in full-minicard slot. - Fan spins up/down in response to CPU load. Known issues: - Native raminit fails timC calibration with the RAM I have. - Technical Product Specification mentions overcurrent protection for back panel and front panel USB connectors, but I haven't been able to trigger it with either native fw or coreboot (tried up to 2.5A load). Untested: - USB debug port. Change-Id: I6e210310f55c051eaf61e0698fed855eda5d7d90 Signed-off-by: Tobias Diedrich <ranma+coreboot@tdiedrich.de> Reviewed-on: https://review.coreboot.org/22683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
This commit is contained in:
Tobias Diedrich
Martin Roth
parent
d7de7bc1ee
commit
7a9520483a
|
|
@ -0,0 +1,92 @@
|
||||||
|
if BOARD_INTEL_DCP847SKE
|
||||||
|
|
||||||
|
config BOARD_SPECIFIC_OPTIONS # dummy
|
||||||
|
def_bool y
|
||||||
|
select BOARD_ROMSIZE_KB_8192
|
||||||
|
select CPU_INTEL_SOCKET_RPGA989
|
||||||
|
select SUPERIO_NUVOTON_NCT6776
|
||||||
|
select HAVE_ACPI_RESUME
|
||||||
|
select HAVE_ACPI_TABLES
|
||||||
|
select NORTHBRIDGE_INTEL_SANDYBRIDGE
|
||||||
|
select SOUTHBRIDGE_INTEL_C216
|
||||||
|
select SERIRQ_CONTINUOUS_MODE
|
||||||
|
select INTEL_INT15
|
||||||
|
select MAINBOARD_HAS_LIBGFXINIT
|
||||||
|
|
||||||
|
menu "Debugging"
|
||||||
|
|
||||||
|
config DISABLE_UART_ON_TESTPADS
|
||||||
|
bool "Disable UART on testpads"
|
||||||
|
default y
|
||||||
|
select NO_UART_ON_SUPERIO
|
||||||
|
help
|
||||||
|
Serial output requires soldering to the testpad next to
|
||||||
|
NCT5577D pin 18 (txd) and gnd.
|
||||||
|
|
||||||
|
endmenu
|
||||||
|
|
||||||
|
config HAVE_IFD_BIN
|
||||||
|
bool
|
||||||
|
default n
|
||||||
|
|
||||||
|
config HAVE_ME_BIN
|
||||||
|
bool
|
||||||
|
default n
|
||||||
|
|
||||||
|
config MAINBOARD_DIR
|
||||||
|
string
|
||||||
|
default intel/dcp847ske
|
||||||
|
|
||||||
|
config MAINBOARD_PART_NUMBER
|
||||||
|
string
|
||||||
|
default "Intel NUC DCP847SKE"
|
||||||
|
|
||||||
|
config VGA_BIOS_FILE
|
||||||
|
string
|
||||||
|
default "pci8086,0106.rom"
|
||||||
|
|
||||||
|
config VGA_BIOS_ID
|
||||||
|
string
|
||||||
|
default "8086,0106"
|
||||||
|
|
||||||
|
config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
|
||||||
|
hex
|
||||||
|
default 0x2044
|
||||||
|
|
||||||
|
config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
|
||||||
|
hex
|
||||||
|
default 0x8086
|
||||||
|
|
||||||
|
config MAX_CPUS
|
||||||
|
int
|
||||||
|
default 2
|
||||||
|
|
||||||
|
config USBDEBUG_HCD_INDEX
|
||||||
|
int
|
||||||
|
default 2
|
||||||
|
|
||||||
|
config IFD_GBE_SECTION
|
||||||
|
string
|
||||||
|
default "0x00001000:0x00002fff"
|
||||||
|
|
||||||
|
config IFD_ME_SECTION
|
||||||
|
string
|
||||||
|
default "0x00003000:0x001bffff"
|
||||||
|
|
||||||
|
config IFD_BIOS_SECTION
|
||||||
|
string
|
||||||
|
default "0x001c0000:0x007fffff"
|
||||||
|
|
||||||
|
config CBFS_SIZE
|
||||||
|
hex
|
||||||
|
default 0x00640000
|
||||||
|
|
||||||
|
config MAINBOARD_SMBIOS_MANUFACTURER
|
||||||
|
string
|
||||||
|
default "Intel Corporation"
|
||||||
|
|
||||||
|
config MAINBOARD_SMBIOS_PRODUCT_NAME
|
||||||
|
string
|
||||||
|
default "DCP847SKE"
|
||||||
|
|
||||||
|
endif # BOARD_INTEL_DCP847SKE
|
||||||
|
|
@ -0,0 +1,2 @@
|
||||||
|
config BOARD_INTEL_DCP847SKE
|
||||||
|
bool "Intel NUC DCP847SKE"
|
||||||
|
|
@ -0,0 +1,4 @@
|
||||||
|
romstage-y += early_southbridge.c
|
||||||
|
romstage-y += gpio.c
|
||||||
|
ramstage-$(CONFIG_MAINBOARD_USE_LIBGFXINIT) += gma-mainboard.ads
|
||||||
|
smm-y += smihandler.c
|
||||||
|
|
@ -0,0 +1 @@
|
||||||
|
/* Dummy file required by pch.asl - No license necessary. */
|
||||||
|
|
@ -0,0 +1,29 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011-2012 The Chromium OS Authors. All rights reserved.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The _PTS method (Prepare To Sleep) is called before the OS is
|
||||||
|
* entering a sleep state. The sleep state number is passed in Arg0
|
||||||
|
*/
|
||||||
|
Method(_WAK,1)
|
||||||
|
{
|
||||||
|
Return(Package(){0,0})
|
||||||
|
}
|
||||||
|
|
||||||
|
/* The _WAK method is called on system wakeup */
|
||||||
|
Method(_PTS,1)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1 @@
|
||||||
|
/* Dummy file required by pch.asl - No license necessary. */
|
||||||
|
|
@ -0,0 +1,36 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008-2009 coresystems GmbH
|
||||||
|
* Copyright (C) 2014 Vladimir Serbinenko
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <southbridge/intel/bd82x6x/nvs.h>
|
||||||
|
#include "thermal.h"
|
||||||
|
|
||||||
|
void acpi_create_gnvs(global_nvs_t *gnvs)
|
||||||
|
{
|
||||||
|
/* Enable USB ports in S3 by default */
|
||||||
|
gnvs->s3u0 = 1;
|
||||||
|
gnvs->s3u1 = 1;
|
||||||
|
|
||||||
|
/* Enable USB ports in S5 by default */
|
||||||
|
gnvs->s5u0 = 1;
|
||||||
|
gnvs->s5u1 = 1;
|
||||||
|
|
||||||
|
// No LID: open by default.
|
||||||
|
gnvs->lids = 1;
|
||||||
|
|
||||||
|
gnvs->tcrt = CRITICAL_TEMPERATURE;
|
||||||
|
gnvs->tpsv = PASSIVE_TEMPERATURE;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,6 @@
|
||||||
|
Category: desktop
|
||||||
|
ROM package: SOIC-8
|
||||||
|
ROM protocol: SPI
|
||||||
|
ROM socketed: n
|
||||||
|
Flashrom support: y
|
||||||
|
Release year: 2013
|
||||||
|
|
@ -0,0 +1,108 @@
|
||||||
|
chip northbridge/intel/sandybridge
|
||||||
|
# IGD Displays
|
||||||
|
register "gfx.ndid" = "3"
|
||||||
|
register "gfx.did" = "{ 0x80000100, 0x80000240, 0x80000410, 0x80000410, 0x00000005 }"
|
||||||
|
|
||||||
|
# Enable DisplayPort 1 Hotplug with 6ms pulse
|
||||||
|
register "gpu_dp_d_hotplug" = "0x06"
|
||||||
|
|
||||||
|
# Enable DisplayPort 0 Hotplug with 6ms pulse
|
||||||
|
register "gpu_dp_c_hotplug" = "0x06"
|
||||||
|
|
||||||
|
# Enable DVI Hotplug with 6ms pulse
|
||||||
|
register "gpu_dp_b_hotplug" = "0x06"
|
||||||
|
|
||||||
|
device cpu_cluster 0x0 on
|
||||||
|
chip cpu/intel/socket_rPGA989
|
||||||
|
device lapic 0x0 on end
|
||||||
|
end
|
||||||
|
chip cpu/intel/model_206ax
|
||||||
|
# Magic APIC ID to locate this chip
|
||||||
|
device lapic 0xACAC off end
|
||||||
|
|
||||||
|
register "c1_battery" = "1"
|
||||||
|
register "c2_battery" = "3"
|
||||||
|
register "c3_battery" = "5"
|
||||||
|
|
||||||
|
register "c1_acpower" = "1"
|
||||||
|
register "c2_acpower" = "3"
|
||||||
|
register "c3_acpower" = "5"
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device domain 0x0 on
|
||||||
|
device pci 00.0 on end # Host bridge Host bridge
|
||||||
|
device pci 01.0 off end # PCIe Bridge for discrete graphics
|
||||||
|
device pci 02.0 on end # Internal graphics VGA controller
|
||||||
|
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
|
||||||
|
register "c2_latency" = "0x0065"
|
||||||
|
register "sata_port_map" = "0x1"
|
||||||
|
register "spi_lvscc" = "0x2005"
|
||||||
|
register "spi_uvscc" = "0x2005"
|
||||||
|
|
||||||
|
register "gen1_dec" = "0x00fc0a01" # SuperIO @0xa00-0xaff
|
||||||
|
|
||||||
|
device pci 16.0 on end # Management Engine Interface 1
|
||||||
|
device pci 16.1 off end # Management Engine Interface 2
|
||||||
|
device pci 16.2 off end # Management Engine IDE-R
|
||||||
|
device pci 16.3 off end # Management Engine KT
|
||||||
|
device pci 19.0 on end # Intel Gigabit Ethernet
|
||||||
|
device pci 1a.0 off end # USB2 EHCI #2
|
||||||
|
device pci 1b.0 on end # High Definition Audio Audio controller
|
||||||
|
device pci 1c.0 on end # PCIe Port #1 (unused)
|
||||||
|
device pci 1c.1 on end # PCIe Port #2 (full-length mPCIe/mSATA)
|
||||||
|
device pci 1c.2 on end # PCIe Port #3 (half-length mPCIe)
|
||||||
|
device pci 1c.3 off end # PCIe Port #4
|
||||||
|
device pci 1c.4 off end # PCIe Port #5
|
||||||
|
device pci 1c.5 off end # PCIe Port #6
|
||||||
|
device pci 1c.6 off end # PCIe Port #7
|
||||||
|
device pci 1c.7 off end # PCIe Port #8
|
||||||
|
device pci 1d.0 on end # USB2 EHCI #1
|
||||||
|
device pci 1e.0 off end # PCI bridge
|
||||||
|
device pci 1f.0 on # LPC bridge PCI-LPC bridge
|
||||||
|
chip superio/nuvoton/nct6776
|
||||||
|
device pnp 4e.0 off end # Floppy
|
||||||
|
device pnp 4e.1 off end # Parallel port
|
||||||
|
device pnp 4e.2 on # COM1
|
||||||
|
io 0x60 = 0x3f8
|
||||||
|
irq 0x70 = 4
|
||||||
|
end
|
||||||
|
device pnp 4e.3 off end # COM2, IR
|
||||||
|
device pnp 4e.5 off end # Keyboard
|
||||||
|
device pnp 4e.6 off end # CIR
|
||||||
|
device pnp 4e.7 on end # GPIO6
|
||||||
|
device pnp 4e.107 on end # GPIO7
|
||||||
|
device pnp 4e.207 off end # GPIO8
|
||||||
|
device pnp 4e.307 off end # GPIO9
|
||||||
|
device pnp 4e.8 off end # WDT
|
||||||
|
device pnp 4e.108 on end # GPIO0
|
||||||
|
device pnp 4e.208 off end # GPIOA
|
||||||
|
device pnp 4e.308 on # GPIOBASE
|
||||||
|
io 0x60 = 0xa80
|
||||||
|
end
|
||||||
|
device pnp 4e.109 off end # GPIO1
|
||||||
|
device pnp 4e.209 on end # GPIO2
|
||||||
|
device pnp 4e.309 off end # GPIO3
|
||||||
|
device pnp 4e.409 off end # GPIO4
|
||||||
|
device pnp 4e.509 off end # GPIO5
|
||||||
|
device pnp 4e.609 off end # GPIO6
|
||||||
|
device pnp 4e.709 off end # GPIO7
|
||||||
|
device pnp 4e.a on end # ACPI
|
||||||
|
device pnp 4e.b on # HWM, front pannel LED
|
||||||
|
io 0x60 = 0xa30
|
||||||
|
io 0x62 = 0 # unused
|
||||||
|
end
|
||||||
|
device pnp 4e.d off end # VID
|
||||||
|
device pnp 4e.e off end # CIR WAKE-UP
|
||||||
|
device pnp 4e.f off end # GPIO
|
||||||
|
device pnp 4e.14 off end # SVID
|
||||||
|
device pnp 4e.16 off end # Deep sleep
|
||||||
|
device pnp 4e.17 off end # GPIOA
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device pci 1f.2 on end # SATA Controller 1
|
||||||
|
device pci 1f.3 on end # SMBus
|
||||||
|
device pci 1f.5 off end # SATA Controller 2
|
||||||
|
device pci 1f.6 off end # Thermal
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
|
@ -0,0 +1,43 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
DefinitionBlock(
|
||||||
|
"dsdt.aml",
|
||||||
|
"DSDT",
|
||||||
|
0x03, // DSDT revision: ACPI v3.0
|
||||||
|
"COREv4", // OEM id
|
||||||
|
"COREBOOT", // OEM table id
|
||||||
|
0x20141018 // OEM revision
|
||||||
|
)
|
||||||
|
{
|
||||||
|
// Some generic macros
|
||||||
|
#include "acpi/platform.asl"
|
||||||
|
#include <cpu/intel/model_206ax/acpi/cpu.asl>
|
||||||
|
#include <southbridge/intel/bd82x6x/acpi/platform.asl>
|
||||||
|
/* global NVS and variables. */
|
||||||
|
#include <southbridge/intel/bd82x6x/acpi/globalnvs.asl>
|
||||||
|
#include <southbridge/intel/bd82x6x/acpi/sleepstates.asl>
|
||||||
|
|
||||||
|
Scope (\_SB) {
|
||||||
|
Device (PCI0)
|
||||||
|
{
|
||||||
|
#include <northbridge/intel/sandybridge/acpi/sandybridge.asl>
|
||||||
|
#include <drivers/intel/gma/acpi/default_brightness_levels.asl>
|
||||||
|
#include <southbridge/intel/bd82x6x/acpi/pch.asl>
|
||||||
|
#include <southbridge/intel/bd82x6x/acpi/default_irq_route.asl>
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,197 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008-2009 coresystems GmbH
|
||||||
|
* Copyright (C) 2014 Vladimir Serbinenko
|
||||||
|
* Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <halt.h>
|
||||||
|
#include <arch/io.h>
|
||||||
|
#include <device/pci_def.h>
|
||||||
|
#include <arch/acpi.h>
|
||||||
|
#include <console/console.h>
|
||||||
|
#include "northbridge/intel/sandybridge/raminit_native.h"
|
||||||
|
|
||||||
|
#include "superio.h"
|
||||||
|
#include "thermal.h"
|
||||||
|
|
||||||
|
#if IS_ENABLED(CONFIG_DISABLE_UART_ON_TESTPADS)
|
||||||
|
#define DEBUG_UART_EN 0
|
||||||
|
#else
|
||||||
|
#define DEBUG_UART_EN COMA_LPC_EN
|
||||||
|
#endif
|
||||||
|
|
||||||
|
void pch_enable_lpc(void)
|
||||||
|
{
|
||||||
|
pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN,
|
||||||
|
CNF2_LPC_EN | DEBUG_UART_EN);
|
||||||
|
/* Decode SuperIO 0x0a00 */
|
||||||
|
pci_write_config32(PCI_DEV(0, 0x1f, 0), LPC_GEN1_DEC, 0x00fc0a01);
|
||||||
|
}
|
||||||
|
|
||||||
|
void rcba_config(void)
|
||||||
|
{
|
||||||
|
/* Disable devices */
|
||||||
|
RCBA32(FD) |= PCH_DISABLE_ALWAYS | PCH_DISABLE_P2P | PCH_DISABLE_XHCI;
|
||||||
|
|
||||||
|
#if IS_ENABLED(CONFIG_USE_NATIVE_RAMINIT)
|
||||||
|
/* Enable Gigabit Ethernet */
|
||||||
|
if (RCBA32(BUC) & PCH_DISABLE_GBE) {
|
||||||
|
RCBA32(BUC) &= ~PCH_DISABLE_GBE;
|
||||||
|
/* Datasheet says clearing the bit requires a reset after */
|
||||||
|
printk(BIOS_DEBUG, "Enabled gigabit ethernet, reset once.\n");
|
||||||
|
outb(0xe, 0xcf9);
|
||||||
|
halt();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Set "mobile" bit in MCH (which makes sense layout-wise). */
|
||||||
|
/* Note sure if this has any effect at all though. */
|
||||||
|
MCHBAR32(0x0004) |= 0x00001000;
|
||||||
|
MCHBAR32(0x0104) |= 0x00001000;
|
||||||
|
}
|
||||||
|
|
||||||
|
void mainboard_early_init(int s3resume)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
static const u16 hwm_initvals[] = {
|
||||||
|
HWM_BANK(0),
|
||||||
|
HWM_INITVAL(0xae, 0x01), /* Enable PECI Agent0 */
|
||||||
|
|
||||||
|
HWM_BANK(7), /* PECI */
|
||||||
|
HWM_INITVAL(0x01, 0x95), /* Enable PECI */
|
||||||
|
HWM_INITVAL(0x03, 0x10), /* Enable Agent 0 */
|
||||||
|
/*
|
||||||
|
* PECI temperatures are negative, going up to 0.
|
||||||
|
* 0 represents the maximum allowable junction temperature, Tjmax.
|
||||||
|
* There is also Tcontrol, which is the temperature at which the
|
||||||
|
* system cooling should run at full speed.
|
||||||
|
* Since the NCT5577D fan control only supports positive values,
|
||||||
|
* Tbase0 is used as an offset.
|
||||||
|
*/
|
||||||
|
HWM_INITVAL(0x09, CRITICAL_TEMPERATURE), /* Tbase0 */
|
||||||
|
|
||||||
|
HWM_BANK(2), /* CPUFAN control */
|
||||||
|
HWM_INITVAL(0x00, 0x0c), /* PECI Agent 0 as CPUFAN monitoring source */
|
||||||
|
HWM_INITVAL(0x01, 50), /* Target temperature */
|
||||||
|
HWM_INITVAL(0x02, 0x40), /* Enable Smart Fan IV mode */
|
||||||
|
HWM_INITVAL(0x03, 0x01), /* Step-up time */
|
||||||
|
HWM_INITVAL(0x04, 0x01), /* Step-down time */
|
||||||
|
HWM_INITVAL(0x05, 0x10), /* Stop PWM value */
|
||||||
|
HWM_INITVAL(0x06, 0x20), /* Start PWM value */
|
||||||
|
HWM_INITVAL(0x21, 45), /* Smart Fan IV Temp1 */
|
||||||
|
HWM_INITVAL(0x22, 46), /* Smart Fan IV Temp2 */
|
||||||
|
HWM_INITVAL(0x23, 47), /* Smart Fan IV Temp3 */
|
||||||
|
HWM_INITVAL(0x24, PASSIVE_TEMPERATURE), /* Smart Fan IV Temp4 */
|
||||||
|
HWM_INITVAL(0x27, 0x01), /* Smart Fan IV PWM1 */
|
||||||
|
HWM_INITVAL(0x28, 0x02), /* Smart Fan IV PWM2 */
|
||||||
|
HWM_INITVAL(0x29, 0x03), /* Smart Fan IV PWM3 */
|
||||||
|
HWM_INITVAL(0x2a, 0xff), /* Smart Fan IV PWM4 */
|
||||||
|
/* Smart Fan IV Critical temp */
|
||||||
|
HWM_INITVAL(0x35, CRITICAL_TEMPERATURE),
|
||||||
|
HWM_INITVAL(0x38, 3), /* Smart Fan IV Critical temp tolerance */
|
||||||
|
HWM_INITVAL(0x39, 0x81), /* Enable SYSTIN weight value */
|
||||||
|
HWM_INITVAL(0x3a, 1), /* SYSTIN temperature step */
|
||||||
|
HWM_INITVAL(0x3b, 2), /* SYSTIN step tolerance */
|
||||||
|
HWM_INITVAL(0x3c, 1), /* SYSTIN weight step */
|
||||||
|
HWM_INITVAL(0x3d, 40), /* SYSTIN temperature base */
|
||||||
|
HWM_INITVAL(0x3e, 0x00), /* SYSTIN fan duty base */
|
||||||
|
|
||||||
|
HWM_BANK(0),
|
||||||
|
};
|
||||||
|
|
||||||
|
static void hwm_init(void)
|
||||||
|
{
|
||||||
|
/* Set up fan control */
|
||||||
|
for (int i = 0; i < ARRAY_SIZE(hwm_initvals); i++)
|
||||||
|
HWM_WRITE_INITVAL(hwm_initvals[i]);
|
||||||
|
}
|
||||||
|
|
||||||
|
static const u16 superio_initvals[] = {
|
||||||
|
/* Global config registers */
|
||||||
|
SUPERIO_INITVAL(0x1a, 0x02),
|
||||||
|
SUPERIO_INITVAL(0x1b, 0x6a),
|
||||||
|
SUPERIO_INITVAL(0x27, 0x80),
|
||||||
|
#if IS_ENABLED(CONFIG_DISABLE_UART_ON_TESTPADS)
|
||||||
|
SUPERIO_INITVAL(0x2a, 0x80),
|
||||||
|
#else
|
||||||
|
SUPERIO_INITVAL(0x2a, 0x00),
|
||||||
|
#endif
|
||||||
|
SUPERIO_INITVAL(0x2c, 0x00),
|
||||||
|
|
||||||
|
SUPERIO_BANK(2), /* UART A */
|
||||||
|
SUPERIO_INITVAL(0x30, 0x01),
|
||||||
|
SUPERIO_INITVAL(0x60, 0x03),
|
||||||
|
SUPERIO_INITVAL(0x61, 0xf8),
|
||||||
|
SUPERIO_INITVAL(0x70, 0x04),
|
||||||
|
|
||||||
|
SUPERIO_BANK(7), /* GPIO config */
|
||||||
|
SUPERIO_INITVAL(0x30, 0x01),
|
||||||
|
SUPERIO_INITVAL(0xe0, 0xcf),
|
||||||
|
SUPERIO_INITVAL(0xe1, 0x0f),
|
||||||
|
SUPERIO_INITVAL(0xe4, 0xed),
|
||||||
|
SUPERIO_INITVAL(0xe5, 0x4d),
|
||||||
|
SUPERIO_INITVAL(0xec, 0x30),
|
||||||
|
SUPERIO_INITVAL(0xee, 0xff),
|
||||||
|
|
||||||
|
SUPERIO_BANK(8),
|
||||||
|
SUPERIO_INITVAL(0x30, 0x0a),
|
||||||
|
SUPERIO_INITVAL(0x60, GPIO_PORT >> 8),
|
||||||
|
SUPERIO_INITVAL(0x61, GPIO_PORT & 0xff),
|
||||||
|
|
||||||
|
SUPERIO_BANK(9),
|
||||||
|
SUPERIO_INITVAL(0x30, 0x8c),
|
||||||
|
SUPERIO_INITVAL(0xe1, 0x90),
|
||||||
|
|
||||||
|
SUPERIO_BANK(0xa),
|
||||||
|
SUPERIO_INITVAL(0xe4, 0x20),
|
||||||
|
SUPERIO_INITVAL(0xe6, 0x4c),
|
||||||
|
|
||||||
|
SUPERIO_BANK(0xb), /* HWM & LED */
|
||||||
|
SUPERIO_INITVAL(0x30, 0x01),
|
||||||
|
SUPERIO_INITVAL(0x60, HWM_PORT >> 8),
|
||||||
|
SUPERIO_INITVAL(0x61, HWM_PORT & 0xff),
|
||||||
|
SUPERIO_INITVAL(0xf7, 0x67),
|
||||||
|
SUPERIO_INITVAL(0xf8, 0x60),
|
||||||
|
|
||||||
|
SUPERIO_BANK(0x16),
|
||||||
|
SUPERIO_INITVAL(0x30, 0x00),
|
||||||
|
};
|
||||||
|
|
||||||
|
static void superio_init(void)
|
||||||
|
{
|
||||||
|
SUPERIO_UNLOCK;
|
||||||
|
for (int i = 0; i < ARRAY_SIZE(superio_initvals); i++)
|
||||||
|
SUPERIO_WRITE_INITVAL(superio_initvals[i]);
|
||||||
|
SUPERIO_LOCK;
|
||||||
|
}
|
||||||
|
|
||||||
|
void mainboard_config_superio(void)
|
||||||
|
{
|
||||||
|
superio_init();
|
||||||
|
hwm_init();
|
||||||
|
}
|
||||||
|
|
||||||
|
void mainboard_get_spd(spd_raw_data *spd, bool id_only)
|
||||||
|
{
|
||||||
|
read_spd(&spd[0], 0x50, id_only);
|
||||||
|
read_spd(&spd[2], 0x51, id_only);
|
||||||
|
}
|
||||||
|
|
||||||
|
const struct southbridge_usb_port mainboard_usb_ports[] = {
|
||||||
|
#define USB_CONFIG(enabled, current, ocpin) { enabled, current, ocpin }
|
||||||
|
#include "usb.h"
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,28 @@
|
||||||
|
-- This file is part of the coreboot project.
|
||||||
|
--
|
||||||
|
-- Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
|
||||||
|
--
|
||||||
|
-- This program is free software; you can redistribute it and/or
|
||||||
|
-- modify it under the terms of the GNU General Public License as
|
||||||
|
-- published by the Free Software Foundation; version 2 of
|
||||||
|
-- the License.
|
||||||
|
--
|
||||||
|
-- This program is distributed in the hope that it will be useful,
|
||||||
|
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
-- GNU General Public License for more details.
|
||||||
|
|
||||||
|
with HW.GFX.GMA;
|
||||||
|
with HW.GFX.GMA.Display_Probing;
|
||||||
|
|
||||||
|
use HW.GFX.GMA;
|
||||||
|
use HW.GFX.GMA.Display_Probing;
|
||||||
|
|
||||||
|
private package GMA.Mainboard is
|
||||||
|
|
||||||
|
ports : constant Port_List :=
|
||||||
|
(HDMI1,
|
||||||
|
HDMI3,
|
||||||
|
others => Disabled);
|
||||||
|
|
||||||
|
end GMA.Mainboard;
|
||||||
|
|
@ -0,0 +1,209 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008-2009 coresystems GmbH
|
||||||
|
* Copyright (C) 2014 Vladimir Serbinenko
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <southbridge/intel/common/gpio.h>
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_mode = {
|
||||||
|
.gpio0 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio1 = GPIO_MODE_GPIO,
|
||||||
|
.gpio2 = GPIO_MODE_GPIO,
|
||||||
|
.gpio3 = GPIO_MODE_GPIO,
|
||||||
|
.gpio4 = GPIO_MODE_GPIO,
|
||||||
|
.gpio5 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio6 = GPIO_MODE_GPIO,
|
||||||
|
.gpio7 = GPIO_MODE_GPIO,
|
||||||
|
.gpio8 = GPIO_MODE_GPIO,
|
||||||
|
.gpio9 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio10 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio11 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio12 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio13 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio14 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio15 = GPIO_MODE_GPIO,
|
||||||
|
.gpio16 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio17 = GPIO_MODE_GPIO,
|
||||||
|
.gpio18 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio19 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio20 = GPIO_MODE_GPIO,
|
||||||
|
.gpio21 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio22 = GPIO_MODE_GPIO,
|
||||||
|
.gpio23 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio24 = GPIO_MODE_GPIO,
|
||||||
|
.gpio25 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio26 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio27 = GPIO_MODE_GPIO,
|
||||||
|
.gpio28 = GPIO_MODE_GPIO,
|
||||||
|
.gpio29 = GPIO_MODE_GPIO,
|
||||||
|
.gpio30 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio31 = GPIO_MODE_NATIVE,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_direction = {
|
||||||
|
.gpio1 = GPIO_DIR_INPUT,
|
||||||
|
.gpio2 = GPIO_DIR_INPUT,
|
||||||
|
.gpio3 = GPIO_DIR_INPUT,
|
||||||
|
.gpio4 = GPIO_DIR_INPUT,
|
||||||
|
.gpio6 = GPIO_DIR_INPUT,
|
||||||
|
.gpio7 = GPIO_DIR_INPUT,
|
||||||
|
.gpio8 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio15 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio17 = GPIO_DIR_INPUT,
|
||||||
|
.gpio20 = GPIO_DIR_INPUT,
|
||||||
|
.gpio22 = GPIO_DIR_INPUT, /* BIOS jumper: 1 = normal, 0 = setup */
|
||||||
|
.gpio24 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio27 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio28 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio29 = GPIO_DIR_OUTPUT,
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* GPIO8: RAM voltage: LOW: 1.5V, HIGH: 1.35V
|
||||||
|
* GPIO27: Set to HIGH on S3/S4/S5 by original fw dsdt.
|
||||||
|
* GPIO29: Actually NATIVE? Can't clear, stays 1.
|
||||||
|
* SLP_LAN# is affected by soft-strap according to docs.
|
||||||
|
* Others: No visible effect when toggling.
|
||||||
|
*/
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_level = {
|
||||||
|
.gpio8 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio15 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio24 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio27 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio28 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio29 = GPIO_LEVEL_HIGH,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_reset = {
|
||||||
|
.gpio30 = GPIO_RESET_RSMRST,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_invert = {
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set1 pch_gpio_set1_blink = {
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_mode = {
|
||||||
|
.gpio32 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio33 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio34 = GPIO_MODE_GPIO,
|
||||||
|
.gpio35 = GPIO_MODE_GPIO,
|
||||||
|
.gpio36 = GPIO_MODE_GPIO,
|
||||||
|
.gpio37 = GPIO_MODE_GPIO,
|
||||||
|
.gpio38 = GPIO_MODE_GPIO,
|
||||||
|
.gpio39 = GPIO_MODE_GPIO,
|
||||||
|
.gpio40 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio41 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio42 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio43 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio44 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio45 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio46 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio47 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio48 = GPIO_MODE_GPIO,
|
||||||
|
.gpio49 = GPIO_MODE_GPIO,
|
||||||
|
.gpio50 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio51 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio52 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio53 = GPIO_MODE_GPIO,
|
||||||
|
.gpio54 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio55 = GPIO_MODE_GPIO,
|
||||||
|
.gpio56 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio57 = GPIO_MODE_GPIO,
|
||||||
|
.gpio58 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio59 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio60 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio61 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio62 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio63 = GPIO_MODE_NATIVE,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_direction = {
|
||||||
|
.gpio34 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio35 = GPIO_DIR_INPUT, /* mSATA presence detect */
|
||||||
|
.gpio36 = GPIO_DIR_INPUT,
|
||||||
|
.gpio37 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio38 = GPIO_DIR_INPUT,
|
||||||
|
.gpio39 = GPIO_DIR_INPUT,
|
||||||
|
.gpio48 = GPIO_DIR_INPUT,
|
||||||
|
.gpio49 = GPIO_DIR_INPUT,
|
||||||
|
.gpio53 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio55 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio57 = GPIO_DIR_INPUT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_level = {
|
||||||
|
.gpio34 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio37 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio53 = GPIO_LEVEL_HIGH,
|
||||||
|
.gpio55 = GPIO_LEVEL_LOW,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set2 pch_gpio_set2_reset = {
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_mode = {
|
||||||
|
.gpio64 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio65 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio66 = GPIO_MODE_GPIO,
|
||||||
|
.gpio67 = GPIO_MODE_GPIO,
|
||||||
|
.gpio68 = GPIO_MODE_GPIO,
|
||||||
|
.gpio69 = GPIO_MODE_GPIO,
|
||||||
|
.gpio70 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio71 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio72 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio73 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio74 = GPIO_MODE_NATIVE,
|
||||||
|
.gpio75 = GPIO_MODE_NATIVE,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_direction = {
|
||||||
|
.gpio66 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio67 = GPIO_DIR_INPUT,
|
||||||
|
.gpio68 = GPIO_DIR_OUTPUT,
|
||||||
|
.gpio69 = GPIO_DIR_INPUT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_level = {
|
||||||
|
.gpio66 = GPIO_LEVEL_LOW,
|
||||||
|
.gpio68 = GPIO_LEVEL_HIGH,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct pch_gpio_set3 pch_gpio_set3_reset = {
|
||||||
|
};
|
||||||
|
|
||||||
|
const struct pch_gpio_map mainboard_gpio_map = {
|
||||||
|
.set1 = {
|
||||||
|
.mode = &pch_gpio_set1_mode,
|
||||||
|
.direction = &pch_gpio_set1_direction,
|
||||||
|
.level = &pch_gpio_set1_level,
|
||||||
|
.blink = &pch_gpio_set1_blink,
|
||||||
|
.invert = &pch_gpio_set1_invert,
|
||||||
|
.reset = &pch_gpio_set1_reset,
|
||||||
|
},
|
||||||
|
.set2 = {
|
||||||
|
.mode = &pch_gpio_set2_mode,
|
||||||
|
.direction = &pch_gpio_set2_direction,
|
||||||
|
.level = &pch_gpio_set2_level,
|
||||||
|
.reset = &pch_gpio_set2_reset,
|
||||||
|
},
|
||||||
|
.set3 = {
|
||||||
|
.mode = &pch_gpio_set3_mode,
|
||||||
|
.direction = &pch_gpio_set3_direction,
|
||||||
|
.level = &pch_gpio_set3_level,
|
||||||
|
.reset = &pch_gpio_set3_reset,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,40 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2008-2009 coresystems GmbH
|
||||||
|
* Copyright (C) 2014 Vladimir Serbinenko
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <device/azalia_device.h>
|
||||||
|
|
||||||
|
const u32 cim_verb_data[] = {
|
||||||
|
0x80862806, /* Codec Vendor / Device ID: Intel */
|
||||||
|
0x80860101, /* Subsystem ID */
|
||||||
|
|
||||||
|
0x00000004, /* Number of 4 dword sets */
|
||||||
|
/* NID 0x01: Subsystem ID. */
|
||||||
|
AZALIA_SUBVENDOR(0x3, 0x80860101),
|
||||||
|
|
||||||
|
/* NID 0x05. */
|
||||||
|
AZALIA_PIN_CFG(0x3, 0x05, 0x18560010),
|
||||||
|
|
||||||
|
/* NID 0x06. */
|
||||||
|
AZALIA_PIN_CFG(0x3, 0x06, 0x58560020),
|
||||||
|
|
||||||
|
/* NID 0x07. */
|
||||||
|
AZALIA_PIN_CFG(0x3, 0x07, 0x18560030),
|
||||||
|
};
|
||||||
|
|
||||||
|
const u32 pc_beep_verbs[0] = {};
|
||||||
|
|
||||||
|
AZALIA_ARRAY_SIZES;
|
||||||
|
|
@ -0,0 +1,38 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <console/console.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <drivers/intel/gma/int15.h>
|
||||||
|
#include <southbridge/intel/common/gpio.h>
|
||||||
|
|
||||||
|
static void mainboard_enable(device_t dev)
|
||||||
|
{
|
||||||
|
printk(BIOS_DEBUG, "Memory voltage: %s\n",
|
||||||
|
get_gpio(8) ? "1.35V" : "1.5V");
|
||||||
|
printk(BIOS_DEBUG, "BIOS_CFG jumper: %s\n",
|
||||||
|
get_gpio(22) ? "normal (1-2)" : "setup (2-3)");
|
||||||
|
printk(BIOS_DEBUG, "mSATA: %s\n",
|
||||||
|
get_gpio(35) ? "present" : "absent");
|
||||||
|
|
||||||
|
install_intel_vga_int15_handler(
|
||||||
|
GMA_INT15_ACTIVE_LFP_NONE, GMA_INT15_PANEL_FIT_DEFAULT,
|
||||||
|
GMA_INT15_BOOT_DISPLAY_DEFAULT, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
struct chip_operations mainboard_ops = {
|
||||||
|
.enable_dev = mainboard_enable,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,69 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007-2010 coresystems GmbH
|
||||||
|
* Copyright (C) 2011 The ChromiumOS Authors. All rights reserved.
|
||||||
|
* Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <stdint.h>
|
||||||
|
#include <northbridge/intel/sandybridge/sandybridge.h>
|
||||||
|
#if IS_ENABLED(CONFIG_USE_NATIVE_RAMINIT)
|
||||||
|
#include <northbridge/intel/sandybridge/raminit_native.h>
|
||||||
|
#else
|
||||||
|
#include <northbridge/intel/sandybridge/raminit.h>
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if !IS_ENABLED(CONFIG_USE_NATIVE_RAMINIT)
|
||||||
|
void mainboard_fill_pei_data(struct pei_data *pei_data)
|
||||||
|
{
|
||||||
|
struct pei_data pei_data_template = {
|
||||||
|
.pei_version = PEI_VERSION,
|
||||||
|
.mchbar = (uintptr_t)DEFAULT_MCHBAR,
|
||||||
|
.dmibar = (uintptr_t)DEFAULT_DMIBAR,
|
||||||
|
.epbar = DEFAULT_EPBAR,
|
||||||
|
.pciexbar = CONFIG_MMCONF_BASE_ADDRESS,
|
||||||
|
.smbusbar = SMBUS_IO_BASE,
|
||||||
|
.wdbbar = 0x4000000,
|
||||||
|
.wdbsize = 0x1000,
|
||||||
|
.hpet_address = CONFIG_HPET_ADDRESS,
|
||||||
|
.rcba = (uintptr_t)DEFAULT_RCBABASE,
|
||||||
|
.pmbase = DEFAULT_PMBASE,
|
||||||
|
.gpiobase = DEFAULT_GPIOBASE,
|
||||||
|
.thermalbase = 0xfed08000,
|
||||||
|
.system_type = 0, // 0 Mobile, 1 Desktop/Server
|
||||||
|
.tseg_size = CONFIG_SMM_TSEG_SIZE,
|
||||||
|
.spd_addresses = { 0xa0, 0x00, 0xa2, 0x00 },
|
||||||
|
.ts_addresses = { 0x00, 0x00, 0x00, 0x00 },
|
||||||
|
.ec_present = 0,
|
||||||
|
.gbe_enable = 1,
|
||||||
|
// 0 = leave channel enabled
|
||||||
|
// 1 = disable dimm 0 on channel
|
||||||
|
// 2 = disable dimm 1 on channel
|
||||||
|
// 3 = disable dimm 0+1 on channel
|
||||||
|
.dimm_channel0_disabled = 2,
|
||||||
|
.dimm_channel1_disabled = 2,
|
||||||
|
.max_ddr3_freq = 1333,
|
||||||
|
.usb_port_config = {
|
||||||
|
#define USB_CONFIG(enabled, current, ocpin) { enabled, ocpin, 0x040 * current }
|
||||||
|
#include "usb.h"
|
||||||
|
},
|
||||||
|
};
|
||||||
|
*pei_data = pei_data_template;
|
||||||
|
}
|
||||||
|
|
||||||
|
int mainboard_should_reset_usb(int s3resume)
|
||||||
|
{
|
||||||
|
return !s3resume;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,29 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <types.h>
|
||||||
|
#include <cpu/x86/smm.h>
|
||||||
|
#include "superio.h"
|
||||||
|
|
||||||
|
void mainboard_smi_sleep(u8 slp_typ)
|
||||||
|
{
|
||||||
|
if (slp_typ > 0 && slp_typ < 4) {
|
||||||
|
/* Enable GRN_LED [Power LED] fading */
|
||||||
|
SUPERIO_UNLOCK;
|
||||||
|
SUPERIO_WRITE(0xf7, 0x68);
|
||||||
|
SUPERIO_LOCK;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,54 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef DCP847SKE_SUPERIO_H
|
||||||
|
#define DCP847SKE_SUPERIO_H
|
||||||
|
|
||||||
|
#include <arch/io.h>
|
||||||
|
|
||||||
|
#define NUVOTON_PORT 0x4e
|
||||||
|
#define HWM_PORT 0x0a30
|
||||||
|
#define GPIO_PORT 0x0a80
|
||||||
|
|
||||||
|
#define SUPERIO_BANK(x) (0x0700 | x)
|
||||||
|
#define SUPERIO_INITVAL(reg, data) ((reg << 8) | (data))
|
||||||
|
#define HWM_BANK(x) (0x4e00 | x)
|
||||||
|
#define HWM_INITVAL SUPERIO_INITVAL
|
||||||
|
|
||||||
|
#define SUPERIO_UNLOCK do { \
|
||||||
|
outb(0x87, NUVOTON_PORT); \
|
||||||
|
outb(0x87, NUVOTON_PORT); \
|
||||||
|
} while (0)
|
||||||
|
|
||||||
|
#define SUPERIO_LOCK do { \
|
||||||
|
outb(0xaa, NUVOTON_PORT); \
|
||||||
|
} while (0)
|
||||||
|
|
||||||
|
#define SUPERIO_WRITE(reg, data) do { \
|
||||||
|
outb((reg), NUVOTON_PORT); \
|
||||||
|
outb((data), NUVOTON_PORT + 1); \
|
||||||
|
} while (0)
|
||||||
|
|
||||||
|
#define SUPERIO_WRITE_INITVAL(val) SUPERIO_WRITE((val) >> 8, (val) & 0xff)
|
||||||
|
|
||||||
|
#define HWM_WRITE(reg, data) do { \
|
||||||
|
outb((reg), HWM_PORT + 5); \
|
||||||
|
outb((data), HWM_PORT + 6); \
|
||||||
|
} while (0)
|
||||||
|
|
||||||
|
#define HWM_WRITE_INITVAL(val) HWM_WRITE((val) >> 8, (val) & 0xff)
|
||||||
|
|
||||||
|
#endif /* DCP847SKE_SUPERIO_H */
|
||||||
|
|
@ -0,0 +1,30 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011 The Chromium OS Authors. All rights reserved.
|
||||||
|
* Copyright (C) 2014 Vladimir Serbinenko
|
||||||
|
* Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef DCP847SKE_THERMAL_H
|
||||||
|
#define DPC847SKE_THERMAL_H
|
||||||
|
|
||||||
|
/* TODO: These should be generated at runtime from
|
||||||
|
* MSR_TEMPERATURE_TARGET (0x1a2) */
|
||||||
|
|
||||||
|
/* Temperature which OS will shutdown at (Tjmax) */
|
||||||
|
#define CRITICAL_TEMPERATURE 100
|
||||||
|
|
||||||
|
/* Temperature which OS will throttle CPU (Tcontrol) */
|
||||||
|
#define PASSIVE_TEMPERATURE 86
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,35 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2017 Tobias Diedrich <ranma+coreboot@tdiedrich.de>
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; version 2 of
|
||||||
|
* the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef DCP847SKE_USB_H
|
||||||
|
#define DPC847SKE_USB_H
|
||||||
|
|
||||||
|
USB_CONFIG(1, 1, 0), /* back, towards HDMI plugs */
|
||||||
|
USB_CONFIG(1, 1, 0), /* back, towards power plug */
|
||||||
|
USB_CONFIG(1, 1, 1), /* half-width miniPCIe */
|
||||||
|
USB_CONFIG(1, 1, 1), /* full-width miniPCIe */
|
||||||
|
USB_CONFIG(1, 1, 2), /* front-panel header */
|
||||||
|
USB_CONFIG(1, 1, 2), /* front-panel header */
|
||||||
|
USB_CONFIG(1, 1, 3), /* front connector */
|
||||||
|
USB_CONFIG(0, 1, 3), /* not available */
|
||||||
|
USB_CONFIG(0, 1, 4), /* not available */
|
||||||
|
USB_CONFIG(0, 1, 4), /* not available */
|
||||||
|
USB_CONFIG(0, 1, 5), /* not available */
|
||||||
|
USB_CONFIG(0, 1, 5), /* not available */
|
||||||
|
USB_CONFIG(0, 1, 6), /* not available */
|
||||||
|
USB_CONFIG(0, 1, 6), /* not available */
|
||||||
|
|
||||||
|
#endif
|
||||||
Loading…
Reference in New Issue