GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

from Mark Wilkinson, some fixes. 

git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1713 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Ronald G. Minnich 2004-10-25 14:57:24 +00:00
parent 8e2847c28e
commit 7ae74b40bf
5 changed files with 36 additions and 434 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

137
src/mainboard/via/epia/Config.lb
View File

@ -1,86 +1,3 @@
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses USE_FALLBACK_IMAGE
uses HAVE_FALLBACK_BOOT
uses HAVE_HARD_RESET
uses HAVE_OPTION_TABLE
uses USE_OPTION_TABLE
uses CONFIG_ROM_STREAM
uses IRQ_SLOT_COUNT
uses MAINBOARD
uses ARCH
uses FALLBACK_SIZE
uses STACK_SIZE
uses HEAP_SIZE
uses ROM_SIZE
uses ROM_SECTION_SIZE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_SIZE
uses ROM_SECTION_OFFSET
uses CONFIG_ROM_STREAM_START
uses PAYLOAD_SIZE
uses _ROMBASE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses HAVE_MP_TABLE
## ROM_SIZE is the size of boot ROM that this board will use.
default ROM_SIZE = 256*1024
###
### Build options
###
##
## Build code for the fallback boot
##
default HAVE_FALLBACK_BOOT=1
##
## no MP table
##
default HAVE_MP_TABLE=0
##
## Build code to reset the motherboard from linuxBIOS
##
default HAVE_HARD_RESET=1
##
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=5
object irq_tables.o
##
## Build code to export a CMOS option table
##
default HAVE_OPTION_TABLE=1
###
### LinuxBIOS layout values
###
## ROM_IMAGE_SIZE is the amount of space to allow linuxBIOS to occupy.
default ROM_IMAGE_SIZE = 65536
##
## Use a small 8K stack
##
default STACK_SIZE=0x2000
##
## Use a small 16K heap
##
default HEAP_SIZE=0x4000
##
## Only use the option table in a normal image
##
#default USE_OPTION_TABLE = !USE_FALLBACK_IMAGE
default USE_OPTION_TABLE = 0
## ##
## Compute the location and size of where this firmware image ## Compute the location and size of where this firmware image
## (linuxBIOS plus bootloader) will live in the boot rom chip. ## (linuxBIOS plus bootloader) will live in the boot rom chip.
@ -155,20 +72,20 @@ end
## ##
## Build our 16 bit and 32 bit linuxBIOS entry code ## Build our 16 bit and 32 bit linuxBIOS entry code
## ##
mainboardinit cpu/i386/entry16.inc mainboardinit cpu/x86/16bit/entry16.inc
mainboardinit cpu/i386/entry32.inc mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/i386/entry16.lds ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/i386/entry32.lds ldscript /cpu/x86/32bit/entry32.lds
## ##
## Build our reset vector (This is where linuxBIOS is entered) ## Build our reset vector (This is where linuxBIOS is entered)
## ##
if USE_FALLBACK_IMAGE if USE_FALLBACK_IMAGE
mainboardinit cpu/i386/reset16.inc mainboardinit cpu/x86/16bit/reset16.inc
ldscript /cpu/i386/reset16.lds ldscript /cpu/x86/16bit/reset16.lds
else else
mainboardinit cpu/i386/reset32.inc mainboardinit cpu/x86/32bit/reset32.inc
ldscript /cpu/i386/reset32.lds ldscript /cpu/x86/32bit/reset32.lds
end end
### Should this be in the northbridge code? ### Should this be in the northbridge code?
@ -210,10 +127,10 @@ mainboardinit ./auto.inc
dir /pc80 dir /pc80
config chip.h config chip.h
northbridge via/vt8601 "vt8601" chip northbridge/via/vt8601
# pci 0:0.0 # pci 0:0.0
# pci 0:1.0 # pci 0:1.0
southbridge via/vt8231 "vt8231" chip southbridge/via/vt8231
# pci 0:11.0 # pci 0:11.0
# pci 0:11.1 # pci 0:11.1
# pci 0:11.2 # pci 0:11.2
@ -227,32 +144,38 @@ northbridge via/vt8601 "vt8601"
register "enable_com_ports" = "1" register "enable_com_ports" = "1"
register "enable_keyboard" = "0" register "enable_keyboard" = "0"
register "enable_nvram" = "1" register "enable_nvram" = "1"
superio winbond/w83627hf link 1 chip superio/winbond/w83627hf
pnp 2e.0 on # Floppy device pnp 2e.0 on # Floppy
io 0x60 = 0x3f0 io 0x60 = 0x3f0
irq 0x70 = 6 irq 0x70 = 6
drq 0x74 = 2 drq 0x74 = 2
pnp 2e.1 off # Parallel Port end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378 io 0x60 = 0x378
irq 0x70 = 7 irq 0x70 = 7
pnp 2e.2 on # Com1 end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8 io 0x60 = 0x3f8
irq 0x70 = 4 irq 0x70 = 4
pnp 2e.3 off # Com2 end
device pnp 2e.3 off # Com2
io 0x60 = 0x2f8 io 0x60 = 0x2f8
irq 0x70 = 3 irq 0x70 = 3
pnp 2e.5 on # Keyboard end
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60 io 0x60 = 0x60
io 0x62 = 0x64 io 0x62 = 0x64
irq 0x70 = 1 irq 0x70 = 1
irq 0x72 = 12 irq 0x72 = 12
pnp 2e.6 off # CIR end
pnp 2e.7 off # GAME_MIDI_GIPO1 device pnp 2e.6 off end # CIR
pnp 2e.8 off # GPIO2 device pnp 2e.7 off end # GAME_MIDI_GIPO1
pnp 2e.9 off # GPIO3 device pnp 2e.8 off end # GPIO2
pnp 2e.a off # ACPI device pnp 2e.9 off end # GPIO3
pnp 2e.b on # HW Monitor device pnp 2e.a off end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290 io 0x60 = 0x290
end
register "com1" = "{1}" register "com1" = "{1}"
# register "com1" = "{1, 0, 0x3f8, 4}" # register "com1" = "{1, 0, 0x3f8, 4}"
# register "lpt" = "{1}" # register "lpt" = "{1}"
@ -260,10 +183,6 @@ northbridge via/vt8601 "vt8601"
end end
end end
cpu p6 "cpu0"
end
## ##
## Include the old serial code for those few places that still need it. ## Include the old serial code for those few places that still need it.
## ##

81
targets/via/epia/Config.512kflash.lb
View File

@ -1,93 +1,17 @@
# Sample config file for EPIA # Sample config file for EPIA
# This will make a target directory of ./epia.512kflash # This will make a target directory of ./epia.512kflash
loadoptions
target epia.512kflash target epia.512kflash
mainboard via/epia
uses ARCH
uses CONFIG_COMPRESS
uses CONFIG_IOAPIC
uses CONFIG_ROM_STREAM
uses CONFIG_ROM_STREAM_START
uses CONFIG_UDELAY_TSC
uses CPU_FIXUP
uses FALLBACK_SIZE
uses HAVE_FALLBACK_BOOT
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses HAVE_HARD_RESET
uses i586
uses i686
uses INTEL_PPRO_MTRR
uses HEAP_SIZE
uses IRQ_SLOT_COUNT
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses CONFIG_SMP
uses CONFIG_MAX_CPUS
uses MEMORY_HOLE
uses PAYLOAD_SIZE
uses _RAMBASE
uses _ROMBASE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_OFFSET
uses ROM_SECTION_SIZE
uses ROM_SIZE
uses STACK_SIZE
uses USE_FALLBACK_IMAGE
uses USE_OPTION_TABLE
uses HAVE_OPTION_TABLE
uses MAXIMUM_CONSOLE_LOGLEVEL
uses DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses MAINBOARD
uses CONFIG_CHIP_CONFIGURE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses LINUXBIOS_EXTRA_VERSION
option CONFIG_CHIP_CONFIGURE=1
option MAXIMUM_CONSOLE_LOGLEVEL=8
option DEFAULT_CONSOLE_LOGLEVEL=8
option CONFIG_CONSOLE_SERIAL8250=1
option CPU_FIXUP=1
option CONFIG_UDELAY_TSC=0
option i686=1
option i586=1
option INTEL_PPRO_MTRR=1
option ROM_SIZE=524288 option ROM_SIZE=524288
option HAVE_OPTION_TABLE=1
option CONFIG_ROM_STREAM=1
option HAVE_FALLBACK_BOOT=1
###
### Compute the location and size of where this firmware image
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
option FALLBACK_SIZE=131072
## LinuxBIOS C code runs at this location in RAM
option _RAMBASE=0x00004000
# #
### # Via Epia
### Compute the start location and size size of
### The linuxBIOS bootloader.
###
#
# Arima hdama
romimage "normal" romimage "normal"
option USE_FALLBACK_IMAGE=0 option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x10000 option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Normal" option LINUXBIOS_EXTRA_VERSION=".0Normal"
mainboard via/epia
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf
payload ../../../../../lnxieepro100.ebi payload ../../../../../lnxieepro100.ebi
@ -97,7 +21,6 @@ romimage "fallback"
option USE_FALLBACK_IMAGE=1 option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x10000 option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Fallback" option LINUXBIOS_EXTRA_VERSION=".0Fallback"
mainboard via/epia
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf
payload ../../../../../lnxieepro100.ebi payload ../../../../../lnxieepro100.ebi

81
targets/via/epia/Config.filo.lb
View File

@ -1,91 +1,15 @@
# Sample config file for EPIA # Sample config file for EPIA
# This will make a target directory of ./epia # This will make a target directory of ./epia
loadoptions
target epia target epia
mainboard via/epia
uses ARCH
uses CONFIG_COMPRESS
uses CONFIG_IOAPIC
uses CONFIG_ROM_STREAM
uses CONFIG_ROM_STREAM_START
uses CONFIG_UDELAY_TSC
uses CPU_FIXUP
uses FALLBACK_SIZE
uses HAVE_FALLBACK_BOOT
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses HAVE_HARD_RESET
uses i586
uses i686
uses INTEL_PPRO_MTRR
uses HEAP_SIZE
uses IRQ_SLOT_COUNT
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses CONFIG_SMP
uses CONFIG_MAX_CPUS
uses MEMORY_HOLE
uses PAYLOAD_SIZE
uses _RAMBASE
uses _ROMBASE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_OFFSET
uses ROM_SECTION_SIZE
uses ROM_SIZE
uses STACK_SIZE
uses USE_FALLBACK_IMAGE
uses USE_OPTION_TABLE
uses HAVE_OPTION_TABLE
uses MAXIMUM_CONSOLE_LOGLEVEL
uses DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses MAINBOARD
uses CONFIG_CHIP_CONFIGURE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses LINUXBIOS_EXTRA_VERSION
option CONFIG_CHIP_CONFIGURE=1
option MAXIMUM_CONSOLE_LOGLEVEL=8
option DEFAULT_CONSOLE_LOGLEVEL=8
option CONFIG_CONSOLE_SERIAL8250=1
option CPU_FIXUP=1
option CONFIG_UDELAY_TSC=0
option i686=1
option i586=1
option INTEL_PPRO_MTRR=1
option ROM_SIZE=256*1024
option HAVE_OPTION_TABLE=1
option CONFIG_ROM_STREAM=1
option HAVE_FALLBACK_BOOT=1
###
### Compute the location and size of where this firmware image
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
option FALLBACK_SIZE=131072
## LinuxBIOS C code runs at this location in RAM
option _RAMBASE=0x00004000
# #
### # Via Epia
### Compute the start location and size size of
### The linuxBIOS bootloader.
###
#
# Arima hdama
romimage "normal" romimage "normal"
option USE_FALLBACK_IMAGE=0 option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x10000 option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Normal" option LINUXBIOS_EXTRA_VERSION=".0Normal"
mainboard via/epia
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf
# payload ../../../../../lnxieepro100.ebi # payload ../../../../../lnxieepro100.ebi
@ -96,7 +20,6 @@ romimage "fallback"
option USE_FALLBACK_IMAGE=1 option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x10000 option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Fallback" option LINUXBIOS_EXTRA_VERSION=".0Fallback"
mainboard via/epia
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf
# payload ../../../../../lnxieepro100.ebi # payload ../../../../../lnxieepro100.ebi

86
targets/via/epia/Config.ituner.filo.lb
View File

@ -1,96 +1,15 @@
# Sample config file for EPIA # Sample config file for EPIA
# This will make a target directory of ./epia # This will make a target directory of ./epia
loadoptions
target epia-ituner-filo target epia-ituner-filo
mainboard via/epia
uses ARCH
uses CONFIG_COMPRESS
uses CONFIG_IOAPIC
uses CONFIG_ROM_STREAM
uses CONFIG_ROM_STREAM_START
uses CONFIG_UDELAY_TSC
uses CPU_FIXUP
uses FALLBACK_SIZE
uses HAVE_FALLBACK_BOOT
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses HAVE_HARD_RESET
uses i586
uses i686
uses INTEL_PPRO_MTRR
uses HEAP_SIZE
uses IRQ_SLOT_COUNT
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses CONFIG_SMP
uses CONFIG_MAX_CPUS
uses MEMORY_HOLE
uses PAYLOAD_SIZE
uses _RAMBASE
uses _ROMBASE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_OFFSET
uses ROM_SECTION_SIZE
uses ROM_SIZE
uses STACK_SIZE
uses USE_FALLBACK_IMAGE
uses USE_OPTION_TABLE
uses HAVE_OPTION_TABLE
uses MAXIMUM_CONSOLE_LOGLEVEL
uses DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses MAINBOARD
uses CONFIG_CHIP_CONFIGURE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses LINUXBIOS_EXTRA_VERSION
uses TTYS0_BAUD
option CONFIG_CHIP_CONFIGURE=1
option MAXIMUM_CONSOLE_LOGLEVEL=8
option DEFAULT_CONSOLE_LOGLEVEL=3
option CONFIG_CONSOLE_SERIAL8250=1
option CPU_FIXUP=1
option CONFIG_UDELAY_TSC=0
option i686=1
option i586=1
option INTEL_PPRO_MTRR=1
option ROM_SIZE=256*1024
option HAVE_OPTION_TABLE=1
option CONFIG_ROM_STREAM=1
option HAVE_FALLBACK_BOOT=1
# Ituner m100 needs 19200
option TTYS0_BAUD=19200
###
### Compute the location and size of where this firmware image
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
option FALLBACK_SIZE=131072
## LinuxBIOS C code runs at this location in RAM
option _RAMBASE=0x00004000
# #
### # Via Epia
### Compute the start location and size size of
### The linuxBIOS bootloader.
###
#
# Arima hdama
romimage "normal" romimage "normal"
option USE_FALLBACK_IMAGE=0 option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x10000 option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Normal" option LINUXBIOS_EXTRA_VERSION=".0Normal"
mainboard via/epia
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf
# payload ../../../../../lnxieepro100.ebi # payload ../../../../../lnxieepro100.ebi
@ -101,7 +20,6 @@ romimage "fallback"
option USE_FALLBACK_IMAGE=1 option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x10000 option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Fallback" option LINUXBIOS_EXTRA_VERSION=".0Fallback"
mainboard via/epia
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf
# payload ../../../../../lnxieepro100.ebi # payload ../../../../../lnxieepro100.ebi

85
targets/via/epia/Config.lb
View File

@ -1,94 +1,14 @@
# Sample config file for EPIA # Sample config file for EPIA
# This will make a target directory of ./epia # This will make a target directory of ./epia
loadoptions
target epia target epia
mainboard via/epia
uses ARCH
uses CONFIG_COMPRESS
uses CONFIG_IOAPIC
uses CONFIG_ROM_STREAM
uses CONFIG_ROM_STREAM_START
uses CONFIG_UDELAY_TSC
uses CPU_FIXUP
uses FALLBACK_SIZE
uses HAVE_FALLBACK_BOOT
uses HAVE_MP_TABLE
uses HAVE_PIRQ_TABLE
uses HAVE_HARD_RESET
uses i586
uses i686
uses INTEL_PPRO_MTRR
uses HEAP_SIZE
uses IRQ_SLOT_COUNT
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses CONFIG_SMP
uses CONFIG_MAX_CPUS
uses MEMORY_HOLE
uses PAYLOAD_SIZE
uses _RAMBASE
uses _ROMBASE
uses ROM_IMAGE_SIZE
uses ROM_SECTION_OFFSET
uses ROM_SECTION_SIZE
uses ROM_SIZE
uses STACK_SIZE
uses USE_FALLBACK_IMAGE
uses USE_OPTION_TABLE
uses HAVE_OPTION_TABLE
uses MAXIMUM_CONSOLE_LOGLEVEL
uses DEFAULT_CONSOLE_LOGLEVEL
uses CONFIG_CONSOLE_SERIAL8250
uses MAINBOARD
uses CONFIG_CHIP_CONFIGURE
uses XIP_ROM_SIZE
uses XIP_ROM_BASE
uses LINUXBIOS_EXTRA_VERSION
uses TTYS0_BAUD
option TTYS0_BAUD=19200
option CONFIG_CHIP_CONFIGURE=1
option MAXIMUM_CONSOLE_LOGLEVEL=7
option DEFAULT_CONSOLE_LOGLEVEL=7
option CONFIG_CONSOLE_SERIAL8250=1
option CPU_FIXUP=1
option CONFIG_UDELAY_TSC=0
option i686=1
option i586=1
option INTEL_PPRO_MTRR=1
option ROM_SIZE=256*1024
option HAVE_OPTION_TABLE=1
option CONFIG_ROM_STREAM=1
option HAVE_FALLBACK_BOOT=1
###
### Compute the location and size of where this firmware image
### (linuxBIOS plus bootloader) will live in the boot rom chip.
###
option FALLBACK_SIZE=131072
## LinuxBIOS C code runs at this location in RAM
option _RAMBASE=0x00004000
# #
### # Via Epia
### Compute the start location and size size of
### The linuxBIOS bootloader.
###
#
# Arima hdama
romimage "normal" romimage "normal"
option USE_FALLBACK_IMAGE=0 option USE_FALLBACK_IMAGE=0
option ROM_IMAGE_SIZE=0x10000 option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Normal" option LINUXBIOS_EXTRA_VERSION=".0Normal"
mainboard via/epia
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf
payload ../../../../../lnxieepro100.ebi payload ../../../../../lnxieepro100.ebi
@ -98,7 +18,6 @@ romimage "fallback"
option USE_FALLBACK_IMAGE=1 option USE_FALLBACK_IMAGE=1
option ROM_IMAGE_SIZE=0x10000 option ROM_IMAGE_SIZE=0x10000
option LINUXBIOS_EXTRA_VERSION=".0Fallback" option LINUXBIOS_EXTRA_VERSION=".0Fallback"
mainboard via/epia
# payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf # payload /usr/share/etherboot/5.1.9pre2-lnxi-lb/tg3--ide_disk.zelf
# payload ../../../../tg3--ide_disk.zelf # payload ../../../../tg3--ide_disk.zelf
payload ../../../../../lnxieepro100.ebi payload ../../../../../lnxieepro100.ebi