diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig
index bc1a80575d..dcf1b1a0af 100644
--- a/src/soc/intel/apollolake/Kconfig
+++ b/src/soc/intel/apollolake/Kconfig
@@ -93,6 +93,7 @@ config CPU_SPECIFIC_OPTIONS
 	select SOC_INTEL_COMMON_BLOCK_SA
 	select SOC_INTEL_COMMON_BLOCK_SCS
 	select SOC_INTEL_COMMON_BLOCK_TIMER
+	select SOC_INTEL_COMMON_BLOCK_TCO
 	select SOC_INTEL_COMMON_BLOCK_UART
 	select SOC_INTEL_COMMON_BLOCK_XDCI
 	select SOC_INTEL_COMMON_BLOCK_XHCI
diff --git a/src/soc/intel/apollolake/bootblock/bootblock.c b/src/soc/intel/apollolake/bootblock/bootblock.c
index ce89f133ee..cf3e8395de 100644
--- a/src/soc/intel/apollolake/bootblock/bootblock.c
+++ b/src/soc/intel/apollolake/bootblock/bootblock.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2016 Intel Corp.
+ * Copyright (C) 2016-2018 Intel Corp.
  * (Written by Andrey Petrov <andrey.petrov@intel.com> for Intel Corp.)
  *
  * This program is free software; you can redistribute it and/or modify
@@ -25,6 +25,7 @@
 #include <intelblocks/rtc.h>
 #include <intelblocks/systemagent.h>
 #include <intelblocks/pmclib.h>
+#include <intelblocks/tco.h>
 #include <intelblocks/uart.h>
 #include <soc/iomap.h>
 #include <soc/cpu.h>
@@ -87,8 +88,6 @@ static void enable_pmcbar(void)
 
 void bootblock_soc_early_init(void)
 {
-	uint32_t reg;
-
 	enable_pmcbar();
 
 	/* Clear global reset promotion bit */
@@ -110,10 +109,8 @@ void bootblock_soc_early_init(void)
 	/* Initialize GPE for use as interrupt status */
 	pmc_gpe_init();
 
-	/* Stop TCO timer */
-	reg = inl(ACPI_BASE_ADDRESS + TCO1_CNT);
-	reg |= TCO_TMR_HLT;
-	outl(reg, ACPI_BASE_ADDRESS + TCO1_CNT);
+	/* Program TCO Timer Halt */
+	tco_configure();
 
 	/* Use Nx and paging to prevent the frontend from writing back dirty
 	 * cache-as-ram lines to backing store that doesn't exist when the L1I
diff --git a/src/soc/intel/apollolake/elog.c b/src/soc/intel/apollolake/elog.c
index 361b041f5c..b03d5e65c2 100644
--- a/src/soc/intel/apollolake/elog.c
+++ b/src/soc/intel/apollolake/elog.c
@@ -21,6 +21,7 @@
 #include <intelblocks/pmclib.h>
 #include <soc/pm.h>
 #include <soc/pci_devs.h>
+#include <soc/smbus.h>
 #include <stdint.h>
 
 static void pch_log_gpio_gpe(u32 gpe0_sts, u32 gpe0_en, int start)
@@ -80,7 +81,7 @@ static void pch_log_power_and_resets(struct chipset_power_state *ps)
 
 	/* TCO Timeout */
 	if (ps->prev_sleep_state != ACPI_S3 &&
-	    ps->tco_sts & TCO_TIMEOUT)
+	    ps->tco1_sts & TCO_TIMEOUT)
 		elog_add_event(ELOG_TYPE_TCO_RESET);
 
 	/* Power Button Override */
diff --git a/src/soc/intel/apollolake/include/soc/iomap.h b/src/soc/intel/apollolake/include/soc/iomap.h
index b1cf3da88a..8e2986d8b7 100644
--- a/src/soc/intel/apollolake/include/soc/iomap.h
+++ b/src/soc/intel/apollolake/include/soc/iomap.h
@@ -29,6 +29,9 @@
 #define ACPI_BASE_SIZE			0x100
 #define R_ACPI_PM1_TMR			0x8
 
+#define TCO_BASE_ADDRESS	(ACPI_BASE_ADDRESS + 0x60)
+#define TCO_BASE_SIZE		0x20
+
 /* CST Range (R/W) IO port block size */
 #define PMG_IO_BASE_CST_RNG_BLK_SIZE	0x5
 /* ACPI PMIO Offset to C-state register*/
diff --git a/src/soc/intel/apollolake/include/soc/pcr_ids.h b/src/soc/intel/apollolake/include/soc/pcr_ids.h
index 4af8f2c23e..264704c755 100644
--- a/src/soc/intel/apollolake/include/soc/pcr_ids.h
+++ b/src/soc/intel/apollolake/include/soc/pcr_ids.h
@@ -40,5 +40,6 @@
 #define PID_TUNIT	0x52
 
 #define PID_PSF3	0xC6
+#define PID_DMI	0x00 /* Reserved */
 
 #endif	/* SOC_INTEL_APL_PCR_H */
diff --git a/src/soc/intel/apollolake/include/soc/pm.h b/src/soc/intel/apollolake/include/soc/pm.h
index c4f1d1b39c..61c97cebb5 100644
--- a/src/soc/intel/apollolake/include/soc/pm.h
+++ b/src/soc/intel/apollolake/include/soc/pm.h
@@ -131,10 +131,6 @@
 
 #define GPE_CNTL		0x50
 #define DEVACT_STS		0x4c
-#define TCO_STS			0x64
-#define   TCO_TIMEOUT		(1 << 3)
-#define TCO1_CNT		0x68
-#define   TCO_TMR_HLT		(1 << 11)
 
 #define GPE0_REG_MAX		4
 #define GPE0_REG_SIZE		32
@@ -240,7 +236,8 @@ struct chipset_power_state {
 	uint32_t pm1_cnt;
 	uint32_t gpe0_sts[GPE0_REG_MAX];
 	uint32_t gpe0_en[GPE0_REG_MAX];
-	uint32_t tco_sts;
+	uint16_t tco1_sts;
+	uint16_t tco2_sts;
 	uint32_t prsts;
 	uint32_t gen_pmcon1;
 	uint32_t gen_pmcon2;
diff --git a/src/soc/intel/apollolake/include/soc/smbus.h b/src/soc/intel/apollolake/include/soc/smbus.h
new file mode 100644
index 0000000000..4b252d61a9
--- /dev/null
+++ b/src/soc/intel/apollolake/include/soc/smbus.h
@@ -0,0 +1,28 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SOC_APOLLOLAKE_SMBUS_H_
+#define _SOC_APOLLOLAKE_SMBUS_H_
+
+/* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */
+#define TCO1_STS			0x04
+#define  TCO_TIMEOUT			(1 << 3)
+#define TCO2_STS			0x06
+#define  TCO_STS_SECOND_TO		(1 << 1)
+#define TCO1_CNT			0x08
+#define  TCO_LOCK			(1 << 12)
+#define  TCO_TMR_HLT			(1 << 11)
+
+#endif
diff --git a/src/soc/intel/apollolake/pmutil.c b/src/soc/intel/apollolake/pmutil.c
index c36d84d8de..812a16a23a 100644
--- a/src/soc/intel/apollolake/pmutil.c
+++ b/src/soc/intel/apollolake/pmutil.c
@@ -28,11 +28,13 @@
 #include <intelblocks/msr.h>
 #include <intelblocks/pmclib.h>
 #include <intelblocks/rtc.h>
+#include <intelblocks/tco.h>
 #include <rules.h>
 #include <soc/iomap.h>
 #include <soc/cpu.h>
 #include <soc/pci_devs.h>
 #include <soc/pm.h>
+#include <soc/smbus.h>
 #include <timer.h>
 #include <security/vboot/vbnv.h>
 #include "chip.h"
@@ -133,15 +135,6 @@ const char *const *soc_std_gpe_sts_array(size_t *a)
 	return gpe_sts_bits;
 }
 
-uint32_t soc_reset_tco_status(void)
-{
-	uint32_t tco_sts = inl(ACPI_BASE_ADDRESS + TCO_STS);
-	uint32_t tco_en = inl(ACPI_BASE_ADDRESS + TCO1_CNT);
-
-	outl(tco_sts, ACPI_BASE_ADDRESS + TCO_STS);
-	return tco_sts & tco_en;
-}
-
 void soc_clear_pm_registers(uintptr_t pmc_bar)
 {
 	uint32_t gen_pmcon1;
@@ -173,14 +166,18 @@ void soc_fill_power_state(struct chipset_power_state *ps)
 {
 	uintptr_t pmc_bar0 = read_pmc_mmio_bar();
 
-	ps->tco_sts = inl(ACPI_BASE_ADDRESS + TCO_STS);
+	ps->tco1_sts = tco_read_reg(TCO1_STS);
+	ps->tco2_sts = tco_read_reg(TCO2_STS);
+
 	ps->prsts = read32((void *)(pmc_bar0 + PRSTS));
 	ps->gen_pmcon1 = read32((void *)(pmc_bar0 + GEN_PMCON1));
 	ps->gen_pmcon2 = read32((void *)(pmc_bar0 + GEN_PMCON2));
 	ps->gen_pmcon3 = read32((void *)(pmc_bar0 + GEN_PMCON3));
 
-	printk(BIOS_DEBUG, "prsts: %08x tco_sts: %08x\n",
-	       ps->prsts, ps->tco_sts);
+	printk(BIOS_DEBUG, "prsts: %08x\n",
+	       ps->prsts);
+	printk(BIOS_DEBUG, "tco_sts:   %04x %04x\n",
+	       ps->tco1_sts, ps->tco2_sts);
 	printk(BIOS_DEBUG,
 	       "gen_pmcon1: %08x gen_pmcon2: %08x gen_pmcon3: %08x\n",
 	       ps->gen_pmcon1, ps->gen_pmcon2, ps->gen_pmcon3);
diff --git a/src/soc/intel/cannonlake/bootblock/pch.c b/src/soc/intel/cannonlake/bootblock/pch.c
index 73e159ab09..f45e177c0a 100644
--- a/src/soc/intel/cannonlake/bootblock/pch.c
+++ b/src/soc/intel/cannonlake/bootblock/pch.c
@@ -2,7 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2014 Google Inc.
- * Copyright (C) 2017 Intel Corporation.
+ * Copyright (C) 2017-2018 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -24,6 +24,7 @@
 #include <intelblocks/pmclib.h>
 #include <intelblocks/rtc.h>
 #include <intelblocks/smbus.h>
+#include <intelblocks/tco.h>
 #include <soc/bootblock.h>
 #include <soc/iomap.h>
 #include <soc/lpc.h>
@@ -52,8 +53,6 @@
 #define PCR_DMI_ACPIBDID	0x27B8
 #define PCR_DMI_PMBASEA		0x27AC
 #define PCR_DMI_PMBASEC		0x27B0
-#define PCR_DMI_TCOBASE		0x2778
-#define  TCOEN			(1 << 1)	/* Enable TCO I/O range decode. */
 
 #define PCR_DMI_LPCIOD		0x2770
 #define PCR_DMI_LPCIOE		0x2774
@@ -141,35 +140,6 @@ static void soc_config_acpibase(void)
 	}
 }
 
-static void soc_config_tco(void)
-{
-	uint32_t reg32;
-	uint16_t tcobase;
-	uint16_t tcocnt;
-
-	/* Disable TCO in SMBUS Device first before changing Base Address */
-	reg32 = pci_read_config32(PCH_DEV_SMBUS, TCOCTL);
-	reg32 &= ~TCO_BASE_EN;
-	pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32);
-
-	/* Program TCO Base */
-	tcobase = TCO_BASE_ADDRESS;
-	pci_write_config32(PCH_DEV_SMBUS, TCOBASE, tcobase);
-
-	/* Enable TCO in SMBUS */
-	pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32 | TCO_BASE_EN);
-
-	/*
-	 * Program "TCO Base Address" PCR[DMI] + 2778h[15:5, 1]
-	 */
-	pcr_write32(PID_DMI, PCR_DMI_TCOBASE, tcobase | TCOEN);
-
-	/* Program TCO timer halt */
-	tcocnt = inw(tcobase + TCO1_CNT);
-	tcocnt |= TCO_TMR_HLT;
-	outw(tcocnt, tcobase + TCO1_CNT);
-}
-
 static int pch_check_decode_enable(void)
 {
 	uint32_t dmi_control;
@@ -216,7 +186,7 @@ void pch_early_init(void)
 	soc_config_acpibase();
 
 	/* Programming TCO_BASE_ADDRESS and TCO Timer Halt */
-	soc_config_tco();
+	tco_configure();
 
 	/* Program SMBUS_BASE_ADDRESS and Enable it */
 	smbus_common_init();
diff --git a/src/soc/intel/cannonlake/finalize.c b/src/soc/intel/cannonlake/finalize.c
index b3c07b1154..03ff616a60 100644
--- a/src/soc/intel/cannonlake/finalize.c
+++ b/src/soc/intel/cannonlake/finalize.c
@@ -23,6 +23,7 @@
 #include <device/pci.h>
 #include <intelblocks/lpc_lib.h>
 #include <intelblocks/pcr.h>
+#include <intelblocks/tco.h>
 #include <reg_script.h>
 #include <spi-generic.h>
 #include <soc/p2sb.h>
@@ -55,17 +56,11 @@ static void pch_finalize(void)
 {
 	struct device *dev;
 	uint32_t reg32;
-	uint16_t tcobase, tcocnt;
 	uint8_t *pmcbase;
 	config_t *config;
 	uint8_t reg8;
 
-	/* TCO Lock down */
-	tcobase = smbus_tco_regs();
-	tcocnt = inw(tcobase + TCO1_CNT);
-	tcocnt |= TCO_LOCK;
-	outw(tcocnt, tcobase + TCO1_CNT);
-
+	tco_lockdown();
 	/*
 	 * Disable ACPI PM timer based on dt policy
 	 *
diff --git a/src/soc/intel/cannonlake/include/soc/smbus.h b/src/soc/intel/cannonlake/include/soc/smbus.h
index 9f1cf34862..e3d93a2a54 100644
--- a/src/soc/intel/cannonlake/include/soc/smbus.h
+++ b/src/soc/intel/cannonlake/include/soc/smbus.h
@@ -4,7 +4,7 @@
  * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
  * Copyright (C) 2009 coresystems GmbH
  * Copyright (C) 2014 Google Inc.
- * Copyright (C) 2017 Intel Corporation.
+ * Copyright (C) 2017-2018 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,11 +19,6 @@
 #ifndef _SOC_CANNONLAKE_SMBUS_H_
 #define _SOC_CANNONLAKE_SMBUS_H_
 
-/* PCI registers */
-#define TCOBASE				0x50		/* TCO base address. */
-#define TCOCTL				0x54
-#define  TCO_BASE_EN			(1 << 8)	/* TCO base enable. */
-
 /* IO and MMIO registers under primary BAR */
 /* Set address for PCH as SMBus slave role */
 #define SMB_RCV_SLVA			0x09
@@ -32,10 +27,10 @@
 #define TCO1_STS			0x04
 #define  TCO_TIMEOUT			(1 << 3)
 #define TCO2_STS			0x06
-#define  TCO2_STS_SECOND_TO		(1 << 1)
+#define  TCO_STS_SECOND_TO		(1 << 1)
 #define TCO1_CNT			0x08
-#define TCO_LOCK			(1 << 12)
-#define TCO_TMR_HLT			(1 << 11)
+#define  TCO_LOCK			(1 << 12)
+#define  TCO_TMR_HLT			(1 << 11)
 
 /*
  * Default slave address value for PCH. This value is set to match default
diff --git a/src/soc/intel/cannonlake/pmutil.c b/src/soc/intel/cannonlake/pmutil.c
index 951d8863ac..b57102df42 100644
--- a/src/soc/intel/cannonlake/pmutil.c
+++ b/src/soc/intel/cannonlake/pmutil.c
@@ -29,6 +29,7 @@
 #include <console/console.h>
 #include <intelblocks/pmclib.h>
 #include <intelblocks/rtc.h>
+#include <intelblocks/tco.h>
 #include <halt.h>
 #include <rules.h>
 #include <stdlib.h>
@@ -154,38 +155,6 @@ uint8_t *pmc_mmio_regs(void)
 	return (void *)(uintptr_t)PCH_PWRM_BASE_ADDRESS;
 }
 
-uint16_t smbus_tco_regs(void)
-{
-	uint16_t reg16;
-
-	reg16 = pci_read_config16(PCH_DEV_SMBUS, TCOBASE);
-
-	return ALIGN_DOWN(reg16, 0x20);
-}
-
-uint32_t soc_reset_tco_status(void)
-{
-	u16 tco1_sts;
-	u16 tco2_sts;
-	u16 tcobase;
-
-	tcobase = smbus_tco_regs();
-
-	/* TCO Status 2 register */
-	tco2_sts = inw(tcobase + TCO2_STS);
-	tco2_sts |= TCO2_STS_SECOND_TO;
-	outw(tco2_sts, tcobase + TCO2_STS);
-
-	/* TCO Status 1 register */
-	tco1_sts = inw(tcobase + TCO1_STS);
-
-	/* Clear SECOND_TO_STS bit */
-	if (tco2_sts & TCO2_STS_SECOND_TO)
-		outw(tco2_sts & ~TCO2_STS_SECOND_TO, tcobase + TCO2_STS);
-
-	return (tco2_sts << 16) | tco1_sts;
-}
-
 uintptr_t soc_read_pmc_base(void)
 {
 	return (uintptr_t)pmc_mmio_regs();
diff --git a/src/soc/intel/cannonlake/romstage/power_state.c b/src/soc/intel/cannonlake/romstage/power_state.c
index 72361ff83a..99a93accbe 100644
--- a/src/soc/intel/cannonlake/romstage/power_state.c
+++ b/src/soc/intel/cannonlake/romstage/power_state.c
@@ -19,6 +19,7 @@
 #include <console/console.h>
 #include <device/device.h>
 #include <intelblocks/pmclib.h>
+#include <intelblocks/tco.h>
 #include <string.h>
 #include <soc/pci_devs.h>
 #include <soc/pm.h>
@@ -66,13 +67,10 @@ int soc_prev_sleep_state(const struct chipset_power_state *ps,
 
 void soc_fill_power_state(struct chipset_power_state *ps)
 {
-	uint16_t tcobase;
 	uint8_t *pmc;
 
-	tcobase = smbus_tco_regs();
-
-	ps->tco1_sts = inw(tcobase + TCO1_STS);
-	ps->tco2_sts = inw(tcobase + TCO2_STS);
+	ps->tco1_sts = tco_read_reg(TCO1_STS);
+	ps->tco2_sts = tco_read_reg(TCO2_STS);
 
 	printk(BIOS_DEBUG, "TCO_STS:   %04x %04x\n",
 	ps->tco1_sts, ps->tco2_sts);
diff --git a/src/soc/intel/common/block/include/intelblocks/pmclib.h b/src/soc/intel/common/block/include/intelblocks/pmclib.h
index e1c29be1ad..82eb2ae4c4 100644
--- a/src/soc/intel/common/block/include/intelblocks/pmclib.h
+++ b/src/soc/intel/common/block/include/intelblocks/pmclib.h
@@ -93,13 +93,6 @@ uint32_t pmc_clear_tco_status(void);
  */
 const char *const *soc_tco_sts_array(size_t *a);
 
-/*
- * Resets the tco status registers. This function clears the tco_sts register
- * and returns the sts and enable bits set.
- */
-uint32_t soc_reset_tco_status(void);
-
-
 /* GPE */
 
 /*
diff --git a/src/soc/intel/common/block/include/intelblocks/tco.h b/src/soc/intel/common/block/include/intelblocks/tco.h
new file mode 100644
index 0000000000..86fa33b61a
--- /dev/null
+++ b/src/soc/intel/common/block/include/intelblocks/tco.h
@@ -0,0 +1,36 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2017-2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef SOC_INTEL_COMMON_BLOCK_TCO_H
+#define SOC_INTEL_COMMON_BLOCK_TCO_H
+
+#include <stdint.h>
+
+/*
+ * Enable TCO BAR using SMBUS TCO base to access TCO related register
+ * also disable the timer.
+ */
+void tco_configure(void);
+/* Lockdown TCO registers before booting to OS */
+void tco_lockdown(void);
+/*
+ * Resets the tco status registers. This function clears the tco_sts register
+ * and returns the status bits set.
+ */
+uint32_t tco_reset_status(void);
+uint16_t tco_read_reg(uint16_t tco_reg);
+void tco_write_reg(uint16_t tco_reg, uint16_t value);
+
+#endif /* SOC_INTEL_COMMON_BLOCK_TCO_H */
diff --git a/src/soc/intel/common/block/pmc/pmclib.c b/src/soc/intel/common/block/pmc/pmclib.c
index 4a1da9ecb9..a4696805a1 100644
--- a/src/soc/intel/common/block/pmc/pmclib.c
+++ b/src/soc/intel/common/block/pmc/pmclib.c
@@ -20,6 +20,7 @@
 #include <halt.h>
 #include <intelblocks/pmclib.h>
 #include <intelblocks/gpio.h>
+#include <intelblocks/tco.h>
 #include <soc/pm.h>
 #include <string.h>
 #include <timer.h>
@@ -260,7 +261,7 @@ static uint32_t print_tco_status(uint32_t tco_sts)
 
 uint32_t pmc_clear_tco_status(void)
 {
-	return print_tco_status(soc_reset_tco_status());
+	return print_tco_status(tco_reset_status());
 }
 
 /* GPE */
diff --git a/src/soc/intel/common/block/smbus/Kconfig b/src/soc/intel/common/block/smbus/Kconfig
index 4514383364..fe940ccab0 100644
--- a/src/soc/intel/common/block/smbus/Kconfig
+++ b/src/soc/intel/common/block/smbus/Kconfig
@@ -2,3 +2,14 @@ config SOC_INTEL_COMMON_BLOCK_SMBUS
 	bool
 	help
 	  Intel Processor common SMBus support
+
+config SOC_INTEL_COMMON_BLOCK_TCO
+	bool
+	help
+	  Intel Processor common TCO support
+
+config SOC_INTEL_COMMON_BLOCK_TCO_ENABLE_THROUGH_SMBUS
+	bool
+	depends on SOC_INTEL_COMMON_BLOCK_TCO
+	help
+	  Select this config to enable TCO BAR through SMBUS
diff --git a/src/soc/intel/common/block/smbus/Makefile.inc b/src/soc/intel/common/block/smbus/Makefile.inc
index 1a10fd9735..309ad9a3d8 100644
--- a/src/soc/intel/common/block/smbus/Makefile.inc
+++ b/src/soc/intel/common/block/smbus/Makefile.inc
@@ -1,8 +1,15 @@
 bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_SMBUS) += smbuslib.c
 bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_SMBUS) += smbus_early.c
+bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_TCO) += tco.c
 
 romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_SMBUS) += smbuslib.c
 romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_SMBUS) += smbus_early.c
+romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_TCO) += tco.c
 
 ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_SMBUS) += smbuslib.c
 ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_SMBUS) += smbus.c
+ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_TCO) += tco.c
+
+postcar-$(CONFIG_SOC_INTEL_COMMON_BLOCK_TCO) += tco.c
+smm-$(CONFIG_SOC_INTEL_COMMON_BLOCK_TCO) += tco.c
+verstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_TCO) += tco.c
diff --git a/src/soc/intel/common/block/smbus/tco.c b/src/soc/intel/common/block/smbus/tco.c
new file mode 100644
index 0000000000..14589450d2
--- /dev/null
+++ b/src/soc/intel/common/block/smbus/tco.c
@@ -0,0 +1,139 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2018 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <arch/io.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_def.h>
+#include <intelblocks/pcr.h>
+#include <intelblocks/tco.h>
+#include <soc/iomap.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+#include <soc/pm.h>
+#include <soc/smbus.h>
+
+#define PCR_DMI_TCOBASE 0x2778
+/* Enable TCO I/O range decode. */
+#define TCOEN (1 << 1)
+
+/* SMBUS TCO base address. */
+#define TCOBASE		0x50
+#define TCOCTL		0x54
+#define  TCO_BASE_EN		(1 << 8)
+
+/* Get base address of TCO I/O registers. */
+static uint16_t tco_get_bar(void)
+{
+	return TCO_BASE_ADDRESS;
+}
+
+uint16_t tco_read_reg(uint16_t tco_reg)
+{
+	uint16_t tcobase;
+
+	tcobase = tco_get_bar();
+
+	return inw(tcobase + tco_reg);
+}
+
+void tco_write_reg(uint16_t tco_reg, uint16_t value)
+{
+	uint16_t tcobase;
+
+	tcobase = tco_get_bar();
+
+	outw(value, tcobase + tco_reg);
+}
+
+void tco_lockdown(void)
+{
+	uint16_t tcocnt;
+
+	/* TCO Lock down */
+	tcocnt = tco_read_reg(TCO1_CNT);
+	tcocnt |= TCO_LOCK;
+	tco_write_reg(TCO1_CNT, tcocnt);
+}
+
+uint32_t tco_reset_status(void)
+{
+	uint16_t tco1_sts;
+	uint16_t tco2_sts;
+
+	/* TCO Status 2 register */
+	tco2_sts = tco_read_reg(TCO2_STS);
+	tco2_sts |= TCO_STS_SECOND_TO;
+	tco_write_reg(TCO2_STS, tco2_sts);
+
+	/* TCO Status 1 register */
+	tco1_sts = tco_read_reg(TCO1_STS);
+
+	return (tco2_sts << 16) | tco1_sts;
+}
+
+/* Stop TCO timer */
+static void tco_timer_disable(void)
+{
+	uint16_t tcocnt;
+
+	/* Program TCO timer halt */
+	tcocnt = tco_read_reg(TCO1_CNT);
+	tcocnt |= TCO_TMR_HLT;
+	tco_write_reg(TCO1_CNT, tcocnt);
+}
+
+/* Enable TCO BAR using SMBUS TCO base to access TCO related register */
+static void tco_enable_bar(void)
+{
+	uint32_t reg32;
+	uint16_t tcobase;
+#if defined(__SIMPLE_DEVICE__)
+	int devfn = PCH_DEVFN_SMBUS;
+	pci_devfn_t dev = PCI_DEV(0, PCI_SLOT(devfn), PCI_FUNC(devfn));
+#else
+	struct device *dev;
+	dev = PCH_DEV_SMBUS;
+#endif
+
+	/* Disable TCO in SMBUS Device first before changing Base Address */
+	reg32 = pci_read_config32(dev, TCOCTL);
+	reg32 &= ~TCO_BASE_EN;
+	pci_write_config32(dev, TCOCTL, reg32);
+
+	/* Program TCO Base */
+	tcobase = tco_get_bar();
+	pci_write_config32(dev, TCOBASE, tcobase);
+
+	/* Enable TCO in SMBUS */
+	pci_write_config32(dev, TCOCTL, reg32 | TCO_BASE_EN);
+
+	/*
+	* Program "TCO Base Address" PCR[DMI] + 2778h[15:5, 1]
+	*/
+	pcr_write32(PID_DMI, PCR_DMI_TCOBASE, tcobase | TCOEN);
+}
+
+/*
+ * Enable TCO BAR using SMBUS TCO base to access TCO related register
+ * also disable the timer.
+ */
+void tco_configure(void)
+{
+	if (IS_ENABLED(CONFIG_SOC_INTEL_COMMON_BLOCK_TCO_ENABLE_THROUGH_SMBUS))
+		tco_enable_bar();
+
+	tco_timer_disable();
+}
diff --git a/src/soc/intel/common/block/smm/smihandler.c b/src/soc/intel/common/block/smm/smihandler.c
index 538028d76a..16f31b6756 100644
--- a/src/soc/intel/common/block/smm/smihandler.c
+++ b/src/soc/intel/common/block/smm/smihandler.c
@@ -31,6 +31,7 @@
 #include <soc/pm.h>
 #include <soc/gpio.h>
 #include <soc/iomap.h>
+#include <soc/smbus.h>
 #include <spi-generic.h>
 #include <stdint.h>
 #include <stdlib.h>
diff --git a/src/soc/intel/common/pch/Kconfig b/src/soc/intel/common/pch/Kconfig
index f4f3ad004f..a832742f5e 100644
--- a/src/soc/intel/common/pch/Kconfig
+++ b/src/soc/intel/common/pch/Kconfig
@@ -37,6 +37,8 @@ config PCH_SPECIFIC_OPTIONS
 	select SOC_INTEL_COMMON_BLOCK_SCS
 	select SOC_INTEL_COMMON_BLOCK_SMBUS
 	select SOC_INTEL_COMMON_BLOCK_SPI
+	select SOC_INTEL_COMMON_BLOCK_TCO
+	select SOC_INTEL_COMMON_BLOCK_TCO_ENABLE_THROUGH_SMBUS
 	select SOC_INTEL_COMMON_BLOCK_TIMER
 	select SOC_INTEL_COMMON_BLOCK_UART
 	select SOC_INTEL_COMMON_BLOCK_XDCI
diff --git a/src/soc/intel/icelake/bootblock/pch.c b/src/soc/intel/icelake/bootblock/pch.c
index 28d669aa2c..2afb358726 100644
--- a/src/soc/intel/icelake/bootblock/pch.c
+++ b/src/soc/intel/icelake/bootblock/pch.c
@@ -23,6 +23,7 @@
 #include <intelblocks/pmclib.h>
 #include <intelblocks/rtc.h>
 #include <intelblocks/smbus.h>
+#include <intelblocks/tco.h>
 #include <soc/bootblock.h>
 #include <soc/iomap.h>
 #include <soc/lpc.h>
@@ -49,9 +50,6 @@
 #define PCR_DMI_ACPIBDID	0x27B8
 #define PCR_DMI_PMBASEA		0x27AC
 #define PCR_DMI_PMBASEC		0x27B0
-#define PCR_DMI_TCOBASE		0x2778
-/* Enable TCO I/O range decode. */
-#define  TCOEN			(1 << 1)
 
 #define PCR_DMI_LPCIOD		0x2770
 #define PCR_DMI_LPCIOE		0x2774
@@ -119,35 +117,6 @@ static void soc_config_acpibase(void)
 	}
 }
 
-static void soc_config_tco(void)
-{
-	uint32_t reg32;
-	uint16_t tcobase;
-	uint16_t tcocnt;
-
-	/* Disable TCO in SMBUS Device first before changing Base Address */
-	reg32 = pci_read_config32(PCH_DEV_SMBUS, TCOCTL);
-	reg32 &= ~TCO_BASE_EN;
-	pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32);
-
-	/* Program TCO Base */
-	tcobase = TCO_BASE_ADDRESS;
-	pci_write_config32(PCH_DEV_SMBUS, TCOBASE, tcobase);
-
-	/* Enable TCO in SMBUS */
-	pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32 | TCO_BASE_EN);
-
-	/*
-	 * Program "TCO Base Address" PCR[DMI] + 2778h[15:5, 1]
-	 */
-	pcr_write32(PID_DMI, PCR_DMI_TCOBASE, tcobase | TCOEN);
-
-	/* Program TCO timer halt */
-	tcocnt = inw(tcobase + TCO1_CNT);
-	tcocnt |= TCO_TMR_HLT;
-	outw(tcocnt, tcobase + TCO1_CNT);
-}
-
 static int pch_check_decode_enable(void)
 {
 	uint32_t dmi_control;
@@ -194,7 +163,7 @@ void pch_early_init(void)
 	soc_config_acpibase();
 
 	/* Programming TCO_BASE_ADDRESS and TCO Timer Halt */
-	soc_config_tco();
+	tco_configure();
 
 	/* Program SMBUS_BASE_ADDRESS and Enable it */
 	smbus_common_init();
diff --git a/src/soc/intel/icelake/finalize.c b/src/soc/intel/icelake/finalize.c
index fb78350709..a9c9ea12c3 100644
--- a/src/soc/intel/icelake/finalize.c
+++ b/src/soc/intel/icelake/finalize.c
@@ -22,6 +22,7 @@
 #include <device/pci.h>
 #include <intelblocks/lpc_lib.h>
 #include <intelblocks/pcr.h>
+#include <intelblocks/tco.h>
 #include <reg_script.h>
 #include <spi-generic.h>
 #include <soc/p2sb.h>
@@ -54,16 +55,12 @@ static void pch_finalize(void)
 {
 	struct device *dev;
 	uint32_t reg32;
-	uint16_t tcobase, tcocnt;
 	uint8_t *pmcbase;
 	config_t *config;
 	uint8_t reg8;
 
 	/* TCO Lock down */
-	tcobase = smbus_tco_regs();
-	tcocnt = inw(tcobase + TCO1_CNT);
-	tcocnt |= TCO_LOCK;
-	outw(tcocnt, tcobase + TCO1_CNT);
+	tco_lockdown();
 
 	/*
 	 * Disable ACPI PM timer based on dt policy
diff --git a/src/soc/intel/icelake/include/soc/smbus.h b/src/soc/intel/icelake/include/soc/smbus.h
index 64c3eb3f3a..f4f5b11288 100644
--- a/src/soc/intel/icelake/include/soc/smbus.h
+++ b/src/soc/intel/icelake/include/soc/smbus.h
@@ -16,11 +16,6 @@
 #ifndef _SOC_ICELAKE_SMBUS_H_
 #define _SOC_ICELAKE_SMBUS_H_
 
-/* PCI registers */
-#define TCOBASE				0x50		/* TCO base address. */
-#define TCOCTL				0x54
-#define  TCO_BASE_EN			(1 << 8)	/* TCO base enable. */
-
 /* IO and MMIO registers under primary BAR */
 /* Set address for PCH as SMBus slave role */
 #define SMB_RCV_SLVA			0x09
@@ -29,10 +24,10 @@
 #define TCO1_STS			0x04
 #define  TCO_TIMEOUT			(1 << 3)
 #define TCO2_STS			0x06
-#define  TCO2_STS_SECOND_TO		(1 << 1)
+#define  TCO_STS_SECOND_TO		(1 << 1)
 #define TCO1_CNT			0x08
-#define TCO_LOCK			(1 << 12)
-#define TCO_TMR_HLT			(1 << 11)
+#define  TCO_LOCK			(1 << 12)
+#define  TCO_TMR_HLT			(1 << 11)
 
 /*
  * Default slave address value for PCH. This value is set to match default
diff --git a/src/soc/intel/icelake/pmutil.c b/src/soc/intel/icelake/pmutil.c
index c020bf61d6..abd52c4ff0 100644
--- a/src/soc/intel/icelake/pmutil.c
+++ b/src/soc/intel/icelake/pmutil.c
@@ -28,6 +28,7 @@
 #include <console/console.h>
 #include <intelblocks/pmclib.h>
 #include <intelblocks/rtc.h>
+#include <intelblocks/tco.h>
 #include <halt.h>
 #include <rules.h>
 #include <stdlib.h>
@@ -153,38 +154,6 @@ uint8_t *pmc_mmio_regs(void)
 	return (void *)(uintptr_t)PCH_PWRM_BASE_ADDRESS;
 }
 
-uint16_t smbus_tco_regs(void)
-{
-	uint16_t reg16;
-
-	reg16 = pci_read_config16(PCH_DEV_SMBUS, TCOBASE);
-
-	return ALIGN_DOWN(reg16, 0x20);
-}
-
-uint32_t soc_reset_tco_status(void)
-{
-	u16 tco1_sts;
-	u16 tco2_sts;
-	u16 tcobase;
-
-	tcobase = smbus_tco_regs();
-
-	/* TCO Status 2 register */
-	tco2_sts = inw(tcobase + TCO2_STS);
-	tco2_sts |= TCO2_STS_SECOND_TO;
-	outw(tco2_sts, tcobase + TCO2_STS);
-
-	/* TCO Status 1 register */
-	tco1_sts = inw(tcobase + TCO1_STS);
-
-	/* Clear SECOND_TO_STS bit */
-	if (tco2_sts & TCO2_STS_SECOND_TO)
-		outw(tco2_sts & ~TCO2_STS_SECOND_TO, tcobase + TCO2_STS);
-
-	return (tco2_sts << 16) | tco1_sts;
-}
-
 uintptr_t soc_read_pmc_base(void)
 {
 	return (uintptr_t)pmc_mmio_regs();
diff --git a/src/soc/intel/icelake/romstage/power_state.c b/src/soc/intel/icelake/romstage/power_state.c
index 17ed36a9d9..3f1a211c6c 100644
--- a/src/soc/intel/icelake/romstage/power_state.c
+++ b/src/soc/intel/icelake/romstage/power_state.c
@@ -18,6 +18,7 @@
 #include <console/console.h>
 #include <device/device.h>
 #include <intelblocks/pmclib.h>
+#include <intelblocks/tco.h>
 #include <string.h>
 #include <soc/pci_devs.h>
 #include <soc/pm.h>
@@ -65,13 +66,10 @@ int soc_prev_sleep_state(const struct chipset_power_state *ps,
 
 void soc_fill_power_state(struct chipset_power_state *ps)
 {
-	uint16_t tcobase;
 	uint8_t *pmc;
 
-	tcobase = smbus_tco_regs();
-
-	ps->tco1_sts = inw(tcobase + TCO1_STS);
-	ps->tco2_sts = inw(tcobase + TCO2_STS);
+	ps->tco1_sts = tco_read_reg(TCO1_STS);
+	ps->tco2_sts = tco_read_reg(TCO2_STS);
 
 	printk(BIOS_DEBUG, "TCO_STS:   %04x %04x\n",
 	ps->tco1_sts, ps->tco2_sts);
diff --git a/src/soc/intel/skylake/bootblock/pch.c b/src/soc/intel/skylake/bootblock/pch.c
index 26ea56a93a..6403ed3ee7 100644
--- a/src/soc/intel/skylake/bootblock/pch.c
+++ b/src/soc/intel/skylake/bootblock/pch.c
@@ -2,8 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2014 Google Inc.
- * Copyright (C) 2015 Intel Corporation.
- * Copyright (C) 2016 Intel Corporation.
+ * Copyright (C) 2015-2018 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -27,6 +26,7 @@
 #include <intelblocks/pmclib.h>
 #include <intelblocks/rtc.h>
 #include <intelblocks/smbus.h>
+#include <intelblocks/tco.h>
 #include <soc/bootblock.h>
 #include <soc/iomap.h>
 #include <soc/p2sb.h>
@@ -43,7 +43,6 @@
 #define PCR_DMI_ACPIBDID	0x27B8
 #define PCR_DMI_PMBASEA		0x27AC
 #define PCR_DMI_PMBASEC		0x27B0
-#define PCR_DMI_TCOBASE		0x2778
 
 void bootblock_pch_early_init(void)
 {
@@ -112,37 +111,6 @@ static void soc_config_pwrmbase(void)
 		pcr_write32(PID_DMI, PCR_DMI_PMBASEC, 0x800023a0);
 }
 
-static void soc_config_tco(void)
-{
-	uint32_t reg32 = 0;
-	uint16_t tcobase;
-	uint16_t tcocnt;
-
-	/* Disable TCO in SMBUS Device first before changing Base Address */
-	reg32 = pci_read_config32(PCH_DEV_SMBUS, TCOCTL);
-	reg32 &= ~TCO_EN;
-	pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32);
-
-	/* Program TCO Base */
-	pci_write_config32(PCH_DEV_SMBUS, TCOBASE, TCO_BASE_ADDRESS);
-
-	/* Enable TCO in SMBUS */
-	pci_write_config32(PCH_DEV_SMBUS, TCOCTL, reg32 | TCO_EN);
-
-	/*
-	 * Program "TCO Base Address" PCR[DMI] + 2778h[15:5, 1]
-	 * to [SMBUS PCI offset 50h[15:5], 1].
-	 */
-	pcr_write32(PID_DMI, PCR_DMI_TCOBASE, TCO_BASE_ADDRESS | (1 << 1));
-
-	/* Program TCO timer halt */
-	tcobase = pci_read_config16(PCH_DEV_SMBUS, TCOBASE);
-	tcobase &= ~0x1f;
-	tcocnt = inw(tcobase + TCO1_CNT);
-	tcocnt |= TCO_TMR_HLT;
-	outw(tcocnt, tcobase + TCO1_CNT);
-}
-
 static int pch_check_decode_enable(void)
 {
 	uint32_t dmi_control;
@@ -196,7 +164,7 @@ void pch_early_init(void)
 	soc_config_pwrmbase();
 
 	/* Programming TCO_BASE_ADDRESS and TCO Timer Halt */
-	soc_config_tco();
+	tco_configure();
 
 	/* Program SMBUS_BASE_ADDRESS and Enable it */
 	smbus_common_init();
diff --git a/src/soc/intel/skylake/elog.c b/src/soc/intel/skylake/elog.c
index 1fab92e2b0..de790fa461 100644
--- a/src/soc/intel/skylake/elog.c
+++ b/src/soc/intel/skylake/elog.c
@@ -373,7 +373,7 @@ static void pch_log_power_and_resets(struct chipset_power_state *ps)
 
 	/* TCO Timeout */
 	if (ps->prev_sleep_state != ACPI_S3 &&
-	    ps->tco2_sts & TCO2_STS_SECOND_TO)
+	    ps->tco2_sts & TCO_STS_SECOND_TO)
 		elog_add_event(ELOG_TYPE_TCO_RESET);
 
 	/* Power Button Override */
diff --git a/src/soc/intel/skylake/include/soc/pm.h b/src/soc/intel/skylake/include/soc/pm.h
index 47e3941531..f622edbde9 100644
--- a/src/soc/intel/skylake/include/soc/pm.h
+++ b/src/soc/intel/skylake/include/soc/pm.h
@@ -183,9 +183,6 @@ int acpi_sci_irq(void);
 /* Get base address PMC memory mapped registers. */
 uint8_t *pmc_mmio_regs(void);
 
-/* Get base address of TCO I/O registers. */
-uint16_t smbus_tco_regs(void);
-
 /* Set the DISB after DRAM init */
 void pmc_set_disb(void);
 
diff --git a/src/soc/intel/skylake/include/soc/smbus.h b/src/soc/intel/skylake/include/soc/smbus.h
index aeaf1d9ea2..aad57aabb6 100644
--- a/src/soc/intel/skylake/include/soc/smbus.h
+++ b/src/soc/intel/skylake/include/soc/smbus.h
@@ -4,7 +4,7 @@
  * Copyright (C) 2005 Yinghai Lu <yinghailu@gmail.com>
  * Copyright (C) 2009 coresystems GmbH
  * Copyright (C) 2014 Google Inc.
- * Copyright (C) 2015-2017 Intel Corporation.
+ * Copyright (C) 2015-2018 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -22,20 +22,14 @@
 /* PCI Configuration Space (D31:F3): SMBus */
 #define SMB_RCV_SLVA		0x09
 
-/* SMBUS TCO base address. */
-#define TCOBASE		0x50
-#define TCOCTL		0x54
-#define TCO_EN		(1 << 8)
-
 /* TCO registers and fields live behind TCOBASE I/O bar in SMBus device. */
 #define TCO1_STS			0x04
 #define  TCO_TIMEOUT			(1 << 3)
 #define TCO2_STS			0x06
-#define TCO2_STS_SECOND_TO		0x02
-#define TCO2_STS_BOOT			0x04
+#define  TCO_STS_SECOND_TO		0x02
 #define TCO1_CNT			0x08
-#define TCO_LOCK			(1 << 12)
-#define TCO_TMR_HLT			(1 << 11)
+#define  TCO_LOCK			(1 << 12)
+#define  TCO_TMR_HLT			(1 << 11)
 
 /* SMBus I/O bits. */
 #define SMBUS_SLAVE_ADDR	0x24
diff --git a/src/soc/intel/skylake/pmutil.c b/src/soc/intel/skylake/pmutil.c
index 2e1d1713e1..335df53ddc 100644
--- a/src/soc/intel/skylake/pmutil.c
+++ b/src/soc/intel/skylake/pmutil.c
@@ -28,6 +28,7 @@
 #include <intelblocks/pmclib.h>
 #include <halt.h>
 #include <intelblocks/lpc_lib.h>
+#include <intelblocks/tco.h>
 #include <rules.h>
 #include <stdlib.h>
 #include <soc/gpe.h>
@@ -168,40 +169,6 @@ uint8_t *pmc_mmio_regs(void)
 	return (void *)(uintptr_t) reg32;
 }
 
-uint16_t smbus_tco_regs(void)
-{
-	uint16_t reg16;
-
-	reg16 = pci_read_config16(PCH_DEV_SMBUS, TCOBASE);
-
-	reg16 &= ~0x1f;
-
-	return reg16;
-}
-
-uint32_t soc_reset_tco_status(void)
-{
-	u16 tco1_sts;
-	u16 tco2_sts;
-	u16 tcobase;
-
-	tcobase = smbus_tco_regs();
-
-	/* TCO Status 2 register */
-	tco2_sts = inw(tcobase + TCO2_STS);
-	tco2_sts |= (TCO2_STS_SECOND_TO | TCO2_STS_BOOT);
-	outw(tco2_sts, tcobase + TCO2_STS);
-
-	/* TCO Status 1 register */
-	tco1_sts = inw(tcobase + TCO1_STS);
-
-	/* Clear SECOND_TO_STS bit */
-	if (tco2_sts & TCO2_STS_SECOND_TO)
-		outw(tco2_sts & ~TCO2_STS_SECOND_TO, tcobase + TCO2_STS);
-
-	return (tco2_sts << 16) | tco1_sts;
-}
-
 uintptr_t soc_read_pmc_base(void)
 {
 	return (uintptr_t) (pmc_mmio_regs());
@@ -285,13 +252,10 @@ int soc_prev_sleep_state(const struct chipset_power_state *ps,
 
 void soc_fill_power_state(struct chipset_power_state *ps)
 {
-	uint16_t tcobase;
 	uint8_t *pmc;
 
-	tcobase = smbus_tco_regs();
-
-	ps->tco1_sts = inw(tcobase + TCO1_STS);
-	ps->tco2_sts = inw(tcobase + TCO2_STS);
+	ps->tco1_sts = tco_read_reg(TCO1_STS);
+	ps->tco2_sts = tco_read_reg(TCO2_STS);
 
 	printk(BIOS_DEBUG, "TCO_STS:   %04x %04x\n",
 	       ps->tco1_sts, ps->tco2_sts);