Remove #ifdef checks on Kconfig symbols

In coreboot, bool, hex, and int type symbols are ALWAYS defined.

Change-Id: I58a36b37075988bb5ff67ac692c7d93c145b0dbc
Signed-off-by: Martin Roth <martinroth@google.com>
Reviewed-on: https://review.coreboot.org/12560
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

src/arch/x86/acpi.c

@@ -38,11 +38,6 @@
 #include <timestamp.h>
 #include <romstage_handoff.h>
 
-/* FIXME: Kconfig doesn't support overridable defaults :-( */
-#ifndef CONFIG_HPET_MIN_TICKS
-#define CONFIG_HPET_MIN_TICKS 0x1000
-#endif
-
 u8 acpi_checksum(u8 *table, u32 length)
 {
 	u8 ret = 0;

src/arch/x86/include/arch/pirq_routing.h

@@ -43,10 +43,6 @@ struct irq_info {
 	u8 rfu;
 } __attribute__((packed));
 
-#ifndef CONFIG_IRQ_SLOT_COUNT
-#warning "IRQ_SLOT_COUNT is not defined in Kconfig. PIRQ won't work correctly."
-#endif
-
 struct irq_routing_table {
 	u32 signature;		/* PIRQ_SIGNATURE should be here */
 	u16 version;		/* PIRQ_VERSION */

src/cpu/intel/fsp_model_406dx/bootblock.c

@@ -45,10 +45,6 @@ static void check_for_warm_reset(void)
 
 static void set_var_mtrr(int reg, uint32_t base, uint32_t size, int type)
 {
-#ifndef CONFIG_CPU_ADDR_BITS
-#error "CONFIG_CPU_ADDR_BITS must be set."
-#endif
-
 	/* Bit Bit 32-35 of MTRRphysMask should be set to 1 */
 	msr_t basem, maskm;
 	basem.lo = base | type;

src/drivers/intel/fsp1_0/cache_as_ram.inc

@@ -20,10 +20,6 @@
 #include <cpu/x86/post_code.h>
 #include <cbmem.h>
 
-#ifndef CONFIG_FSP_LOC
-# error "CONFIG_FSP_LOC must be set."
-#endif
-
 	cmp   $0, %eax
 	je    cache_as_ram
 	mov   $0xa0, %eax

src/drivers/intel/fsp1_0/fastboot_cache.c

@@ -27,10 +27,6 @@
 #include <lib.h> // hexdump
 #include "fsp_util.h"
 
-#ifndef CONFIG_VIRTUAL_ROM_SIZE
-#error "CONFIG_VIRTUAL_ROM_SIZE must be set."
-#endif
-
 /* convert a pointer to flash area into the offset inside the flash */
 static inline u32 to_flash_offset(void *p) {
 	return ((u32)p + CONFIG_VIRTUAL_ROM_SIZE);

src/drivers/intel/fsp1_0/fsp_util.c

@@ -115,10 +115,6 @@ volatile u8 * find_fsp ()
 	volatile u8 *fsp_ptr;
 #endif 	/* __PRE_RAM__ */
 
-#ifndef CONFIG_FSP_LOC
-#error "CONFIG_FSP_LOC must be set."
-#endif
-
 	/* The FSP is stored in CBFS */
 	fsp_ptr = (u8 *) CONFIG_FSP_LOC;
 

src/drivers/pc80/mc146818rtc_early.c

@@ -5,9 +5,6 @@
 #include "option_table.h"
 #endif
 
-#ifndef CONFIG_MAX_REBOOT_CNT
-#error "CONFIG_MAX_REBOOT_CNT not defined"
-#endif
 #if  CONFIG_MAX_REBOOT_CNT > 15
 #error "CONFIG_MAX_REBOOT_CNT too high"
 #endif

src/drivers/pc80/tpm/tpm.c

@@ -49,11 +49,6 @@
 
 /* coreboot wrapper for TPM driver (end) */
 
-#ifndef CONFIG_TPM_TIS_BASE_ADDRESS
-/* Base TPM address standard for x86 systems */
-#define CONFIG_TPM_TIS_BASE_ADDRESS        0xfed40000
-#endif
-
 /* the macro accepts the locality value, but only locality 0 is operational */
 #define TIS_REG(LOCALITY, REG) \
     (void *)(CONFIG_TPM_TIS_BASE_ADDRESS + (LOCALITY << 12) + REG)

src/northbridge/amd/amdk8/coherent_ht.c

@@ -93,10 +93,6 @@
 	#define TRY_HIGH_FIRST 0
 #endif
 
-#ifndef CONFIG_K8_HT_FREQ_1G_SUPPORT
-	#define CONFIG_K8_HT_FREQ_1G_SUPPORT 0
-#endif
-
 #ifndef K8_HT_CHECK_PENDING_LINK
 	#if CONFIG_MAX_PHYSICAL_CPUS >= 4
 		#define K8_HT_CHECK_PENDING_LINK 1
@@ -109,11 +105,6 @@
 	#define CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED 0
 #endif
 
-#ifndef CONFIG_ENABLE_APIC_EXT_ID
-	#define CONFIG_ENABLE_APIC_EXT_ID 0
-#endif
-
-
 static inline void print_linkn (const char *strval, uint8_t byteval)
 {
 	printk(BIOS_DEBUG, "%s%02x\n", strval, byteval);

src/northbridge/intel/fsp_sandybridge/fsp/chipset_fsp_util.c

@@ -24,10 +24,6 @@
 #include "../chip.h"
 #include <reset.h>
 
-#ifndef CONFIG_ENABLE_FSP_FAST_BOOT
-# error "CONFIG_ENABLE_FSP_FAST_BOOT must be set."
-#endif
-
 #ifdef __PRE_RAM__
 
 #if IS_ENABLED(CONFIG_SOUTHBRIDGE_INTEL_FSP_I89XX)

src/soc/intel/fsp_baytrail/baytrail/smm.h

@@ -22,10 +22,6 @@
  * clobbered by the arch/x86/Kconfig if they have the same name. */
 static inline int smm_region_size(void)
 {
-#ifndef CONFIG_SMM_TSEG_SIZE
-#error CONFIG_SMM_TSEG_SIZE must be set.
-#endif
-
 	/* Make it 8MiB by default. */
 	if (CONFIG_SMM_TSEG_SIZE == 0)
 		return (8 << 20);

src/soc/intel/fsp_baytrail/cpu.c

@@ -147,9 +147,6 @@ static void adjust_apic_id_map(struct smm_loader_params *smm_params)
 
 static void asmlinkage cpu_smm_do_relocation(void *arg)
 {
-#ifndef CONFIG_MAX_CPUS
-#error CONFIG_MAX_CPUS must be set.
-#endif
 	msr_t smrr;
 	em64t100_smm_state_save_area_t *smm_state;
         const struct smm_module_params *p;
@@ -204,9 +201,6 @@ static int install_relocation_handler(int num_cpus)
 
 static int install_permanent_handler(int num_cpus)
 {
-#ifndef CONFIG_SMM_RESERVED_SIZE
-#error CONFIG_SMM_RESERVED_SIZE must be set.
-#endif
 	/* There are num_cpus concurrent stacks and num_cpus concurrent save
 	 * state areas. Lastly, set the stack size to the save state size. */
 	int save_state_size = sizeof(em64t100_smm_state_save_area_t);

src/soc/intel/fsp_baytrail/iosf.c

@@ -18,9 +18,6 @@
 #include <baytrail/iosf.h>
 
 #if !defined(__PRE_RAM__)
-#ifndef CONFIG_MMCONF_BASE_ADDRESS
-#error CONFIG_MMCONF_BASE_ADDRESS must be set.
-#endif
 #define IOSF_PCI_BASE (CONFIG_MMCONF_BASE_ADDRESS + (IOSF_PCI_DEV << 12))
 
 static inline void write_iosf_reg(int reg, uint32_t value)

src/soc/intel/fsp_baytrail/nvm.c

@@ -46,9 +46,6 @@ static int nvm_init(void)
 /* Convert memory mapped pointer to flash offset. */
 static inline uint32_t to_flash_offset(void *p)
 {
-#ifndef CONFIG_ROM_SIZE
-#error CONFIG_ROM_SIZE must be set.
-#endif
 	return CONFIG_ROM_SIZE + (uintptr_t)p;
 }
 

src/soc/intel/fsp_baytrail/smihandler.c

@@ -177,9 +177,6 @@ static void southbridge_smi_sleep(void)
  */
 static em64t100_smm_state_save_area_t *smi_apmc_find_state_save(uint8_t cmd)
 {
-#ifndef CONFIG_MAX_CPUS
-#error CONFIG_MAX_CPUS must be set.
-#endif
 	em64t100_smm_state_save_area_t *state;
 	int node;
 

src/soc/intel/fsp_baytrail/southcluster.c

@@ -57,9 +57,6 @@ add_mmio_resource(device_t dev, int i, unsigned long addr, unsigned long size)
 
 static void sc_add_mmio_resources(device_t dev)
 {
-#ifndef CONFIG_VIRTUAL_ROM_SIZE
-#error CONFIG_VIRTUAL_ROM_SIZE must be set.
-#endif
 	add_mmio_resource(dev, 0xfeb, ABORT_BASE_ADDRESS, ABORT_BASE_SIZE);
 	add_mmio_resource(dev, PBASE, PMC_BASE_ADDRESS, PMC_BASE_SIZE);
 	add_mmio_resource(dev, IOBASE, IO_BASE_ADDRESS, IO_BASE_SIZE);