mb/google/sarien: Enable WWAN detection
WWAN start-up control requires RESET# assert after FULL_CARD_POWER_OFF# set to high more than 10 ms, so force RESET#(GPP_D21) to low at bootblock stage to match the sequence. BUG=N/A TEST=Boot up Sarien/Arcada board, check WWAN get detected as USB devices through lsusb. Change-Id: I36eb841a2e8f2b36771d20577314a7451fbee133 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/29430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
This commit is contained in:
parent
6c36d151a8
commit
7ca21c1024
2 changed files with 4 additions and 0 deletions
|
@ -234,6 +234,8 @@ static const struct pad_config early_gpio_table[] = {
|
|||
/* I2C4_SCL */ PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1), /* I2C_SCL_H1 */
|
||||
/* DMIC_DATA1 */ PAD_CFG_GPI_APIC(GPP_D18, NONE, DEEP,
|
||||
EDGE_SINGLE, INVERT), /* H1_PCH_INT_ODL */
|
||||
/* RESET# need to stay low before FULL_CARD_POWER_OFF assert */
|
||||
/* SPI1_IO2 */ PAD_CFG_GPO(GPP_D21, 0, DEEP), /* WWAN_BB_RST# */
|
||||
/* CPU_GP0 */ PAD_CFG_GPI(GPP_E3, NONE, DEEP), /* MEM_INTERLEAVED */
|
||||
/* SATALED# */ PAD_CFG_GPI(GPP_E8, NONE, DEEP), /* RECOVERY# */
|
||||
/* DDPD_HPD2 */ PAD_CFG_GPI(GPP_E15, NONE, DEEP), /* PCH_WP */
|
||||
|
|
|
@ -234,6 +234,8 @@ static const struct pad_config early_gpio_table[] = {
|
|||
/* I2C4_SCL */ PAD_CFG_NF(GPP_H9, NONE, DEEP, NF1), /* I2C_SCL_H1 */
|
||||
/* DMIC_DATA1 */ PAD_CFG_GPI_APIC(GPP_D18, NONE, DEEP,
|
||||
EDGE_SINGLE, INVERT), /* H1_PCH_INT_ODL */
|
||||
/* RESET# need to stay low before FULL_CARD_POWER_OFF assert */
|
||||
/* SPI1_IO2 */ PAD_CFG_GPO(GPP_D21, 0, DEEP), /* WWAN_BB_RST# */
|
||||
/* CPU_GP0 */ PAD_CFG_GPI(GPP_E3, NONE, DEEP), /* MEM_INTERLEAVED */
|
||||
/* SATALED# */ PAD_CFG_GPI(GPP_E8, NONE, DEEP), /* RECOVERY */
|
||||
/* DDPD_HPD2 */ PAD_CFG_GPI(GPP_E15, NONE, DEEP), /* H1_FLASH_WP */
|
||||
|
|
Loading…
Reference in a new issue