VX900: Add DDR3 initialization

The VX900 can be connected to either DDR2 or DDR3. On my board, it is
DDR3, hence why there is no and will be no DDR2 code from my side.

This is the raminit for DDR3 dimms for the VX900. I like the term
"raminit" better than "memory training". This is a device, not a dog.

What works and what doesn't is documented in the code. It does not
make sense to hide that information in a commit message.

Change-Id: Ib2ebc10e6d4d22d0a937fe9e895c17ce79153c88
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-on: http://review.coreboot.org/3417
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>

src/northbridge/via/vx900/Makefile.inc

@@ -21,7 +21,7 @@ romstage-y += pci_util.c
 romstage-y += early_smbus.c
 romstage-y += early_vx900.c
 romstage-y += early_host_bus_ctl.c
-#romstage-y += raminit_ddr3.c
+romstage-y += raminit_ddr3.c
 romstage-y += ./../../../device/dram/ddr3.c
 romstage-y += ./../../../southbridge/via/common/early_smbus_delay.c
 romstage-y += ./../../../southbridge/via/common/early_smbus_is_busy.c

src/northbridge/via/vx900/raminit.h

@@ -0,0 +1,100 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2011  Alexandru Gagniuc <mr.nuke.me@gmail.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef RAMINIT_VX900_H
+#define RAMINIT_VX900_H
+
+#include <device/dram/ddr3.h>
+#include "vx900.h"
+
+#define SPD_END_LIST 0xff
+
+typedef struct dimm_layout_st
+{
+	/* The address of the DIMM on the SMBUS *
+	 * 0xFF to terminate the array*/
+	u8 spd_addr[VX900_MAX_DIMM_SLOTS + 1];
+} dimm_layout;
+
+typedef struct dimm_info_st
+{
+	dimm_attr dimm[VX900_MAX_DIMM_SLOTS];
+} dimm_info;
+
+typedef struct mem_rank_st {
+	u16 start_addr;
+	u16 end_addr;
+} mem_rank;
+
+typedef struct rank_layout_st {
+	u32 phys_rank_size_mb[VX900_MAX_MEM_RANKS];
+	mem_rank virt[VX900_MAX_MEM_RANKS];
+	dimm_flags_t flags[VX900_MAX_MEM_RANKS];
+} rank_layout;
+
+typedef struct pci_reg8_st {
+	u8 addr;
+	u8 val;
+} pci_reg8;
+
+typedef u8 timing_dly[8];
+
+typedef struct delay_range_st {
+	timing_dly low;
+	timing_dly avg;
+	timing_dly high;
+} delay_range;
+
+typedef struct vx900_delay_calib_st {
+	delay_range rx_dq_cr;
+	delay_range rx_dqs;
+	/* Transmit delays are calibrated for each dimm */
+	delay_range tx_dq[VX900_MAX_DIMM_SLOTS];
+	delay_range tx_dqs[VX900_MAX_DIMM_SLOTS];
+} vx900_delay_calib;
+
+typedef struct ramctr_timing_st {
+	enum spd_memory_type dram_type;
+	u16 cas_supported;
+	/* tLatencies are in units of ns, scaled by x256 */
+	u32 tCK;
+	u32 tAA;
+	u32 tWR;
+	u32 tRCD;
+	u32 tRRD;
+	u32 tRP;
+	u32 tRAS;
+	u32 tRC;
+	u32 tRFC;
+	u32 tWTR;
+	u32 tRTP;
+	u32 tFAW;
+	/* Latencies in terms of clock cycles
+	 * They are saved separately as they are needed for DRAM MRS commands*/
+	u8 CAS; /* CAS read latency */
+	u8 CWL; /* CAS write latency */
+	u8 WR;  /* write recovery time */
+	/* Number of dimms currently connected */
+	u8 n_dimms;
+
+} ramctr_timing;
+
+void vx900_init_dram_ddr3(const dimm_layout *dimms);
+
+#endif /* RAMINIT_VX900_H */

src/northbridge/via/vx900/vx900.h

@@ -33,8 +33,8 @@
 #define VX900_MAX_DIMM_SLOTS 2
 #define VX900_MAX_MEM_RANKS 4
 
-#define min(a,b) a<b?a:b
-#define max(a,b) a>b?a:b
+#define min(a,b) (a<b?a:b)
+#define max(a,b) (a>b?a:b)
 
 #include <arch/io.h>
 #include <device/pci.h>