GNUBoot
/
coreboot-kgpe-d16
2
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

This patch fixes the superio of the khepri 2100e as detected: 

> superiotool r2922
> Found Winbond W83627HF/F/HG/G (id=0x52, rev=0x0d) at 0x2e

Don't use the non-working trident driver for the blade3d (onboard vga 
in the rom emulator has not been tested either)

It also adds some preliminary CAR support to the board, so it has a chance to
build again.

This board was broken since a couple of months, and the changes are minimal, so
I consider this a trivial change -- It doesn't change anything that was used,
obviously

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2926 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Stefan Reinauer 2007-11-02 09:48:14 +00:00 committed by Stefan Reinauer
parent 9c84a46007
commit 7d8cd7602f
4 changed files with 409 additions and 48 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

156
src/mainboard/newisys/khepri/Config.lb
View File

@ -47,8 +47,27 @@ if HAVE_MP_TABLE object mptable.o end
if HAVE_PIRQ_TABLE object irq_tables.o end
#object reset.o
dir /drivers/trident/blade3d
if USE_DCACHE_RAM
if CONFIG_USE_INIT
makerule ./auto.o
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -o auto.o"
end
else
makerule ./auto.inc
depends "$(MAINBOARD)/cache_as_ram_auto.c option_table.h"
action "$(CC) -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/cache_as_ram_auto.c -Os -nostdinc -nostdlib -fno-builtin -Wall -c -S -o $@"
action "perl -e 's/.rodata/.rom.data/g' -pi $@"
action "perl -e 's/.text/.section .rom.text/g' -pi $@"
end
end
else
##
## Romcc output
##
@ -71,13 +90,27 @@ makerule ./auto.inc
action "./romcc -mcpu=k8 -O2 -I$(TOP)/src -I. $(CPPFLAGS) $(MAINBOARD)/auto.c -o $@"
end
end
##
## Build our 16 bit and 32 bit linuxBIOS entry code
##
mainboardinit cpu/x86/16bit/entry16.inc
if USE_FALLBACK_IMAGE
mainboardinit cpu/x86/16bit/entry16.inc
ldscript /cpu/x86/16bit/entry16.lds
end
mainboardinit cpu/x86/32bit/entry32.inc
ldscript /cpu/x86/16bit/entry16.lds
ldscript /cpu/x86/32bit/entry32.lds
if USE_DCACHE_RAM
if CONFIG_USE_INIT
ldscript /cpu/x86/32bit/entry32.lds
end
if CONFIG_USE_INIT
ldscript /cpu/amd/car/cache_as_ram.lds
end
end
##
## Build our reset vector (This is where linuxBIOS is entered)
@ -91,23 +124,36 @@ else
end
### Should this be in the northbridge code?
if USE_DCACHE_RAM
else
mainboardinit arch/i386/lib/cpu_reset.inc
end
##
## Include an id string (For safe flashing)
##
mainboardinit arch/i386/lib/id.inc
ldscript /arch/i386/lib/id.lds
if USE_DCACHE_RAM
##
## Setup Cache-As-Ram
##
mainboardinit cpu/amd/car/cache_as_ram.inc
end
###
### This is the early phase of linuxBIOS startup
### Things are delicate and we test to see if we should
### failover to another image.
###
if USE_FALLBACK_IMAGE
ldscript /arch/i386/lib/failover.lds
if USE_DCACHE_RAM
ldscript /arch/i386/lib/failover.lds
else
ldscript /arch/i386/lib/failover.lds
mainboardinit ./failover.inc
end
end
###
### O.k. We aren't just an intermediary anymore!
@ -116,6 +162,20 @@ end
##
## Setup RAM
##
if USE_DCACHE_RAM
if CONFIG_USE_INIT
initobject auto.o
else
mainboardinit ./auto.inc
end
else
##
## Setup RAM
##
mainboardinit cpu/x86/fpu/enable_fpu.inc
mainboardinit cpu/x86/mmx/enable_mmx.inc
mainboardinit cpu/x86/sse/enable_sse.inc
@ -123,13 +183,22 @@ mainboardinit ./auto.inc
mainboardinit cpu/x86/sse/disable_sse.inc
mainboardinit cpu/x86/mmx/disable_mmx.inc
##
## Include the secondary Configuration files
##
dir /pc80
end
config chip.h
# FIXME: ROM for onboard VGA
chip northbridge/amd/amdk8/root_complex
device apic_cluster 0 on
chip cpu/amd/socket_940
device apic 0 on end
end
chip cpu/amd/socket_940
device apic 1 on end
end
end
device pci_domain 0 on
chip northbridge/amd/amdk8
device pci 18.0 on end # LDT 0
@ -148,36 +217,45 @@ chip northbridge/amd/amdk8/root_complex
device pci 1.0 on end
end
device pci 1.0 on
chip superio/nsc/pc87360
device pnp 2e.0 off # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
chip superio/winbond/w83627hf
device pnp 2e.0 on # Floppy
io 0x60 = 0x3f0
irq 0x70 = 6
drq 0x74 = 2
end
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
device pnp 2e.1 off # Parallel Port
io 0x60 = 0x378
irq 0x70 = 7
end
device pnp 2e.2 off # Com 2
io 0x60 = 0x2f8
irq 0x70 = 3
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 on # Com 1
io 0x60 = 0x3f8
irq 0x70 = 4
device pnp 2e.3 on # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.4 off end # SWC
device pnp 2e.5 off end # Mouse
device pnp 2e.6 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
device pnp 2e.5 on # Keyboard
io 0x60 = 0x60
io 0x62 = 0x64
irq 0x70 = 1
irq 0x72 = 12
end
device pnp 2e.7 off end # GPIO
device pnp 2e.8 off end # ACB
device pnp 2e.9 off end # FSCM
device pnp 2e.a off end # WDT
device pnp 2e.6 off # CIR
io 0x60 = 0x100
end
device pnp 2e.7 off # GAME_MIDI_GIPO1
io 0x60 = 0x220
io 0x62 = 0x300
irq 0x70 = 9
end
device pnp 2e.8 off end # GPIO2
device pnp 2e.9 off end # GPIO3
device pnp 2e.a off end # ACPI
device pnp 2e.b on # HW Monitor
io 0x60 = 0x290
irq 0x70 = 5
end
end
end
device pci 1.1 on end
@ -201,13 +279,5 @@ chip northbridge/amd/amdk8/root_complex
device pci 19.3 on end
end
end
device apic_cluster 0 on
chip cpu/amd/socket_940
device apic 0 on end
end
chip cpu/amd/socket_940
device apic 1 on end
end
end
end

46
src/mainboard/newisys/khepri/Options.lb
View File

@ -7,6 +7,7 @@ uses IRQ_SLOT_COUNT
uses HAVE_OPTION_TABLE
uses CONFIG_MAX_CPUS
uses CONFIG_MAX_PHYSICAL_CPUS
uses CONFIG_LOGICAL_CPUS
uses CONFIG_IOAPIC
uses CONFIG_SMP
uses FALLBACK_SIZE
@ -18,6 +19,7 @@ uses ROM_SECTION_OFFSET
uses CONFIG_ROM_PAYLOAD
uses CONFIG_ROM_PAYLOAD_START
uses CONFIG_COMPRESSED_PAYLOAD_LZMA
uses CONFIG_PRECOMPRESSED_PAYLOAD
uses PAYLOAD_SIZE
uses _ROMBASE
uses XIP_ROM_SIZE
@ -31,6 +33,8 @@ uses LB_CKS_LOC
uses MAINBOARD_PART_NUMBER
uses MAINBOARD_VENDOR
uses MAINBOARD
uses MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
uses MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
uses LINUXBIOS_EXTRA_VERSION
uses _RAMBASE
uses TTYS0_BAUD
@ -40,11 +44,20 @@ uses DEFAULT_CONSOLE_LOGLEVEL
uses MAXIMUM_CONSOLE_LOGLEVEL
uses MAINBOARD_POWER_ON_AFTER_POWER_FAIL
uses CONFIG_CONSOLE_SERIAL8250
uses HAVE_INIT_TIMER
uses CONFIG_GDB_STUB
uses CROSS_COMPILE
uses CC
uses HOSTCC
uses OBJCOPY
uses CONFIG_CHIP_NAME
uses CONFIG_CONSOLE_VGA
uses CONFIG_PCI_ROM_RUN
uses HW_MEM_HOLE_SIZEK
uses USE_DCACHE_RAM
uses DCACHE_RAM_BASE
uses DCACHE_RAM_SIZE
uses CONFIG_USE_INIT
###
@ -59,6 +72,8 @@ default ROM_SIZE=524288
##
## FALLBACK_SIZE is the amount of the ROM the complete fallback image will use
##
#default FALLBACK_SIZE=131072
#256K
default FALLBACK_SIZE=0x40000
##
@ -75,7 +90,7 @@ default HAVE_HARD_RESET=1
## Build code to export a programmable irq routing table
##
default HAVE_PIRQ_TABLE=1
default IRQ_SLOT_COUNT=9
default IRQ_SLOT_COUNT=15
##
## Build code to export an x86 MP table
@ -100,8 +115,28 @@ default LB_CKS_LOC=123
## Only worry about 2 micro processors
##
default CONFIG_SMP=1
default CONFIG_MAX_CPUS=2
default CONFIG_MAX_CPUS=4
default CONFIG_MAX_PHYSICAL_CPUS=2
default CONFIG_LOGICAL_CPUS=1
#CHIP_NAME ?
default CONFIG_CHIP_NAME=1
#1G memory hole
default HW_MEM_HOLE_SIZEK=0x100000
#VGA Console
default CONFIG_CONSOLE_VGA=1
default CONFIG_PCI_ROM_RUN=1
##
## enable CACHE_AS_RAM specifics
##
default USE_DCACHE_RAM=1
default DCACHE_RAM_BASE=0xcf000
default DCACHE_RAM_SIZE=0x1000
default CONFIG_USE_INIT=0
##
## Build code to setup a generic IOAPIC
@ -113,6 +148,8 @@ default CONFIG_IOAPIC=1
##
default MAINBOARD_PART_NUMBER="Khepri"
default MAINBOARD_VENDOR="Newisys"
default MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID=0x17c2
default MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID=0x0010
###
### LinuxBIOS layout values
@ -156,6 +193,11 @@ default CONFIG_ROM_PAYLOAD = 1
default CC="$(CROSS_COMPILE)gcc -m32"
default HOSTCC="gcc"
##
## Disable the gdb stub by default
##
default CONFIG_GDB_STUB=0
##
## The Serial Console
##

6
src/mainboard/newisys/khepri/auto.c
View File

@ -19,11 +19,11 @@
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include <cpu/amd/model_fxx_rev.h>
#include "superio/nsc/pc87360/pc87360_early_serial.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
#define SERIAL_DEV PNP_DEV(0x2e, PC87360_SP1)
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
static void hard_reset(void)
{
@ -115,7 +115,7 @@ static void main(unsigned long bist)
k8_init_and_stop_secondaries();
}
/* Setup the console */
pc87360_enable_serial(SERIAL_DEV, TTYS0_BASE);
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();

249
src/mainboard/newisys/khepri/cache_as_ram_auto.c Normal file
View File

@ -0,0 +1,249 @@
/*
* This code is derived from the Tyan s2882 cache_as_ram_auto.c
* Adapted by Stefan Reinauer <stepan@coresystems.de>
* Additional (C) 2007 coresystems GmbH
*/
#define ASSEMBLY 1
#define __ROMCC__
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#if 0
static void post_code(uint8_t value) {
#if 1
int i;
for(i=0;i<0x80000;i++) {
outb(value, 0x80);
}
#endif
}
#endif
#include <cpu/amd/model_fxx_rev.h>
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
#if CONFIG_USE_INIT == 0
#include "lib/memcpy.c"
#endif
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
#include "northbridge/amd/amdk8/setup_resource_map.c"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
#include "southbridge/amd/amd8111/amd8111_early_ctrl.c"
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
/* Set the memreset low */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
/* Ensure the BIOS has control of the memory lines */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 29);
}
else {
/* Ensure the CPU has controll of the memory lines */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 29);
}
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
/* Set memreset_high */
outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
udelay(90);
}
}
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
/* nothing to do */
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#define QRANK_DIMM_SUPPORT 1
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
/* newisys khepri does not want the default */
#include "resourcemap.c"
#if CONFIG_LOGICAL_CPUS==1
#define SET_NB_CFG_54 1
#endif
#include "cpu/amd/dualcore/dualcore.c"
#include "cpu/amd/car/copy_and_run.c"
#include "cpu/amd/car/post_cache_as_ram.c"
#include "cpu/amd/model_fxx/init_cpus.c"
#if USE_FALLBACK_IMAGE == 1
#include "southbridge/amd/amd8111/amd8111_enable_rom.c"
#include "northbridge/amd/amdk8/early_ht.c"
void failover_process(unsigned long bist, unsigned long cpu_init_detectedx)
{
unsigned last_boot_normal_x = last_boot_normal();
/* Is this a cpu only reset? or Is this a secondary cpu? */
if ((cpu_init_detectedx) || (!boot_cpu())) {
if (last_boot_normal_x) {
goto normal_image;
} else {
goto fallback_image;
}
}
/* Nothing special needs to be done to find bus 0 */
/* Allow the HT devices to be found */
enumerate_ht_chain();
/* Setup the ck804 */
amd8111_enable_rom();
/* Is this a deliberate reset by the bios */
// post_code(0x22);
if (bios_reset_detected() && last_boot_normal_x) {
goto normal_image;
}
/* This is the primary cpu how should I boot? */
else if (do_normal_boot()) {
goto normal_image;
}
else {
goto fallback_image;
}
normal_image:
// post_code(0x23);
__asm__ volatile ("jmp __normal_image"
: /* outputs */
: "a" (bist), "b" (cpu_init_detectedx) /* inputs */
);
fallback_image:
// post_code(0x25);
;
}
#endif
void real_main(unsigned long bist, unsigned long cpu_init_detectedx);
void cache_as_ram_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
#if USE_FALLBACK_IMAGE == 1
failover_process(bist, cpu_init_detectedx);
#endif
real_main(bist, cpu_init_detectedx);
}
void real_main(unsigned long bist, unsigned long cpu_init_detectedx)
{
static const uint16_t spd_addr [] = {
(0xa<<3)|0, (0xa<<3)|2, 0, 0,
(0xa<<3)|1, (0xa<<3)|3, 0, 0,
#if CONFIG_MAX_PHYSICAL_CPUS > 1
(0xa<<3)|4, (0xa<<3)|6, 0, 0,
(0xa<<3)|5, (0xa<<3)|7, 0, 0,
#endif
};
int needs_reset;
unsigned bsp_apicid = 0;
struct mem_controller ctrl[8];
unsigned nodes;
if (bist == 0) {
bsp_apicid = init_cpus(cpu_init_detectedx);
}
// post_code(0x32);
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
// dump_mem(DCACHE_RAM_BASE+DCACHE_RAM_SIZE-0x200, DCACHE_RAM_BASE+DCACHE_RAM_SIZE);
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
setup_khepri_resource_map();
#if 0
dump_pci_device(PCI_DEV(0, 0x18, 0));
dump_pci_device(PCI_DEV(0, 0x19, 0));
#endif
needs_reset = setup_coherent_ht_domain();
wait_all_core0_started();
#if CONFIG_LOGICAL_CPUS==1
// It is said that we should start core1 after all core0 launched
start_other_cores();
wait_all_other_cores_started(bsp_apicid);
#endif
needs_reset |= ht_setup_chains_x();
if (needs_reset) {
print_info("ht reset -\r\n");
soft_reset();
}
allow_all_aps_stop(bsp_apicid);
nodes = get_nodes();
//It's the time to set ctrl now;
fill_mem_ctrl(nodes, ctrl, spd_addr);
enable_smbus();
memreset_setup();
sdram_initialize(nodes, ctrl);
#if 0
dump_pci_devices();
#endif
post_cache_as_ram();
}