mb/supermicro/x11-lga1151-series: add x11ssm-f board
This adds another x11 series board, the X11SSM-F, which is similiar to X11SSH-TF but differs in PCIe interfaces/devices, GPIO settings and Ethernet interfaces. Change-Id: I24e6f0f41a844652f88b562285b26beef311a2c9 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Michael Niewöhner
This commit is contained in:
Michael Niewöhner
Patrick Georgi
parent
d2aa4730e3
commit
7f2aaacd9e
|
|
@ -7,6 +7,7 @@ Controller etc.
|
||||||
## Supported boards
|
## Supported boards
|
||||||
|
|
||||||
- [X11SSH-TF](x11ssh-tf/x11ssh-tf.md)
|
- [X11SSH-TF](x11ssh-tf/x11ssh-tf.md)
|
||||||
|
- [X11SSM-F](x11ssh-tf/x11ssm-f.md)
|
||||||
|
|
||||||
## Required proprietary blobs
|
## Required proprietary blobs
|
||||||
|
|
||||||
|
|
@ -30,6 +31,7 @@ Look at the [flashing tutorial] and the board-specific section.
|
||||||
These issues apply to all boards. Have a look at the board-specific issues, too.
|
These issues apply to all boards. Have a look at the board-specific issues, too.
|
||||||
|
|
||||||
- TianoCore doesn't work with Aspeed NGI, as it's text mode only (Fix is WIP CB:35726)
|
- TianoCore doesn't work with Aspeed NGI, as it's text mode only (Fix is WIP CB:35726)
|
||||||
|
- MRC caching does not work with cold boot
|
||||||
|
|
||||||
## ToDo
|
## ToDo
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,93 @@
|
||||||
|
# Supermicro X11SSM-F
|
||||||
|
|
||||||
|
This section details how to run coreboot on the [Supermicro X11SSM-F].
|
||||||
|
|
||||||
|
## Flashing coreboot
|
||||||
|
|
||||||
|
The board can be flashed externally. FTDI FT2232H and FT232H based programmers worked.
|
||||||
|
|
||||||
|
The flash IC [MX25L12873F] can be found near PCH PCIe Slot 4. It is socketed on retail boards.
|
||||||
|
|
||||||
|
For doing ISP (In-System-Programming) one needs to add a diode between VCC and the flash chip.
|
||||||
|
|
||||||
|
## BMC (IPMI)
|
||||||
|
|
||||||
|
This board has an ASPEED [AST2400], which has BMC/[IPMI] functionality. The BMC firmware resides in a
|
||||||
|
32 MiB SOIC-16 chip in the corner of the mainboard near the PCH PCIe Slot 4. This chip is a
|
||||||
|
[MX25L25635F].
|
||||||
|
|
||||||
|
## Tested and working
|
||||||
|
|
||||||
|
- GRUB2 payload with Debian testing and kernel 5.2
|
||||||
|
- ECC ram (Linux' ie31200 driver works)
|
||||||
|
- USB ports
|
||||||
|
- Ethernet
|
||||||
|
- SATA ports
|
||||||
|
- RS232 external
|
||||||
|
- PCIe slots
|
||||||
|
- BMC (IPMI)
|
||||||
|
- VGA on Aspeed
|
||||||
|
- TPM on TPM expansion header
|
||||||
|
|
||||||
|
## Known issues
|
||||||
|
|
||||||
|
- See general issue section
|
||||||
|
- "only partially covers this bridge" info from Linux kernel (what does that mean?)
|
||||||
|
- LNXTHERM missing
|
||||||
|
- S3 resume not working
|
||||||
|
|
||||||
|
## ToDo
|
||||||
|
|
||||||
|
- Fix TODOs mentioned in code
|
||||||
|
|
||||||
|
## Technology
|
||||||
|
|
||||||
|
```eval_rst
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| CPU | Intel Kaby Lake |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| PCH | Intel C236 |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Coprocessor | Intel SPS (server version of the ME) |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Super I/O | ASPEED AST2400 |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Ethernet | 2x Intel I210-AT 1 GbE |
|
||||||
|
| | 1x dedicated BMC |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| PCIe slots | 1x 3.0 x8 |
|
||||||
|
| | 1x 3.0 x8 (in x16) |
|
||||||
|
| | 2x 3.0 x4 (in x8) |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| USB slots | 2x USB 2.0 (ext) |
|
||||||
|
| | 2x USB 3.0 (ext) |
|
||||||
|
| | 1x USB 3.0 (int) |
|
||||||
|
| | 1x dual USB 3.0 header |
|
||||||
|
| | 2x dual USB 2.0 header |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| SATA slots | 8x S-ATA III |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
| Other slots | 1x RS232 (ext) |
|
||||||
|
| | 1x RS232 header |
|
||||||
|
| | 1x TPM header |
|
||||||
|
| | 1x Power SMB header |
|
||||||
|
| | 5x PWM Fan connector |
|
||||||
|
| | 2x I-SGPIO |
|
||||||
|
| | 2x S-ATA DOM Power connector |
|
||||||
|
| | 1x XDP Port |
|
||||||
|
| | 1x External BMC I2C Header (for IPMI card) |
|
||||||
|
| | 1x Chassis Intrusion Header |
|
||||||
|
+------------------+--------------------------------------------------+
|
||||||
|
```
|
||||||
|
|
||||||
|
## Extra links
|
||||||
|
|
||||||
|
- [Supermicro X11SSM-F]
|
||||||
|
- [Board manual]
|
||||||
|
|
||||||
|
[Supermicro X11SSM-F]: https://www.supermicro.com/en/products/motherboard/X11SSM-F
|
||||||
|
[Board manual]: https://www.supermicro.com/manuals/motherboard/C236/MNL-1785.pdf
|
||||||
|
[AST2400]: https://www.aspeedtech.com/products.php?fPath=20&rId=376
|
||||||
|
[IPMI]: ../../../../drivers/ipmi_kcs.md
|
||||||
|
[MX25L25635F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L25635F.pdf
|
||||||
|
[MX25L12873F]: https://media.digikey.com/pdf/Data%20Sheets/Macronix/MX25L12873F.pdf
|
||||||
|
|
@ -22,6 +22,7 @@ config MAINBOARD_FAMILY
|
||||||
config MAINBOARD_PART_NUMBER
|
config MAINBOARD_PART_NUMBER
|
||||||
string
|
string
|
||||||
default "X11SSH-TF" if BOARD_SUPERMICRO_X11SSH_TF
|
default "X11SSH-TF" if BOARD_SUPERMICRO_X11SSH_TF
|
||||||
|
default "X11SSM-F" if BOARD_SUPERMICRO_X11SSM_F
|
||||||
|
|
||||||
config MAINBOARD_DIR
|
config MAINBOARD_DIR
|
||||||
string
|
string
|
||||||
|
|
@ -30,6 +31,7 @@ config MAINBOARD_DIR
|
||||||
config VARIANT_DIR
|
config VARIANT_DIR
|
||||||
string
|
string
|
||||||
default "x11ssh-tf" if BOARD_SUPERMICRO_X11SSH_TF
|
default "x11ssh-tf" if BOARD_SUPERMICRO_X11SSH_TF
|
||||||
|
default "x11ssm-f" if BOARD_SUPERMICRO_X11SSM_F
|
||||||
|
|
||||||
config OVERRIDE_DEVICETREE
|
config OVERRIDE_DEVICETREE
|
||||||
string
|
string
|
||||||
|
|
|
||||||
|
|
@ -1,3 +1,7 @@
|
||||||
config BOARD_SUPERMICRO_X11SSH_TF
|
config BOARD_SUPERMICRO_X11SSH_TF
|
||||||
bool "X11SSH-TF"
|
bool "X11SSH-TF"
|
||||||
select BOARD_SUPERMICRO_BASEBOARD_X11_LGA1151_SERIES
|
select BOARD_SUPERMICRO_BASEBOARD_X11_LGA1151_SERIES
|
||||||
|
|
||||||
|
config BOARD_SUPERMICRO_X11SSM_F
|
||||||
|
bool "X11SSM-F"
|
||||||
|
select BOARD_SUPERMICRO_BASEBOARD_X11_LGA1151_SERIES
|
||||||
|
|
|
||||||
|
|
@ -18,5 +18,7 @@ bootblock-y += bootblock.c
|
||||||
|
|
||||||
ramstage-y += ramstage.c
|
ramstage-y += ramstage.c
|
||||||
|
|
||||||
|
CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/include
|
||||||
|
|
||||||
subdirs-y += variants/$(VARIANT_DIR)
|
subdirs-y += variants/$(VARIANT_DIR)
|
||||||
CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include
|
CPPFLAGS_common += -I$(src)/mainboard/$(MAINBOARDDIR)/variants/$(VARIANT_DIR)/include
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,21 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _BASEBOARD_X11_LGA1151_SERIES_H
|
||||||
|
#define _BASEBOARD_X11_LGA1151_SERIES_H
|
||||||
|
|
||||||
|
#include <device/device.h>
|
||||||
|
|
||||||
|
void variant_mainboard_init(struct device *dev);
|
||||||
|
|
||||||
|
#endif /* _BASEBOARD_X11_LGA1151_SERIES_H */
|
||||||
|
|
@ -0,0 +1,41 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2007-2009 coresystems GmbH
|
||||||
|
* Copyright (C) 2013 Google Inc.
|
||||||
|
* Copyright (C) 2016 Intel Corporation.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <mainboard.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
|
||||||
|
__weak void variant_mainboard_init(struct device *dev)
|
||||||
|
{
|
||||||
|
}
|
||||||
|
|
||||||
|
static void mainboard_init(struct device *dev)
|
||||||
|
{
|
||||||
|
/* do common init */
|
||||||
|
// placeholder for common mainboard initialization
|
||||||
|
|
||||||
|
/* do variant init */
|
||||||
|
variant_mainboard_init(dev);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void mainboard_enable(struct device *dev)
|
||||||
|
{
|
||||||
|
dev->ops->init = mainboard_init;
|
||||||
|
}
|
||||||
|
|
||||||
|
struct chip_operations mainboard_ops = {
|
||||||
|
.enable_dev = mainboard_enable,
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1 @@
|
||||||
|
ramstage-y += mainboard.c
|
||||||
|
|
@ -0,0 +1,7 @@
|
||||||
|
Category: server
|
||||||
|
Vendor name: Supermicro
|
||||||
|
Board name: X11SSM-F
|
||||||
|
Board URL: https://www.supermicro.com/en/products/motherboard/X11SSM-F
|
||||||
|
ROM protocol: SPI
|
||||||
|
ROM socketed: y
|
||||||
|
Flashrom support: y
|
||||||
|
|
@ -0,0 +1,269 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* Copyright (C) 2018 Intel Corporation.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _GPIO_X11SSM_F_H
|
||||||
|
#define _GPIO_X11SSM_F_H
|
||||||
|
|
||||||
|
#include <soc/gpe.h>
|
||||||
|
#include <soc/gpio.h>
|
||||||
|
|
||||||
|
static const struct pad_config gpio_table[] = {
|
||||||
|
/* GPIO Group GPP_A */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A0, 0x44000700, 0x00000010), /* RCIN# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A1, 0x44000700, 0x00000010), /* LAD0 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A2, 0x44000700, 0x00000010), /* LAD1 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A3, 0x44000700, 0x00000010), /* LAD2 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A4, 0x44000700, 0x00000010), /* LAD3 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A5, 0x44000700, 0x00000010), /* LFRAME# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A6, 0x44000700, 0x00000010), /* SERIRQ */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A7, 0x44000700, 0x00000010), /* PIRQA# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A8, 0x44000700, 0x00000010), /* CLKRUN# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A9, 0x44000700, 0x00000010), /* CLKOUT_LPC0 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A10, 0x44000700, 0x00000010), /* CLKOUT_LPC1 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A11, 0x44000700, 0x00000010), /* PME# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A12, 0x84000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A13, 0x44000700, 0x00000010), /* SUSWARN#/SUSPWRDNACK */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A14, 0x44000700, 0x00000010), /* SUS_STAT# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A15, 0x44000700, 0x00000010), /* SUS_ACK# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A16, 0x44000700, 0x00000010), /* CLKOUT_48 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A17, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A18, 0x84000100, 0x00000010), /* GPIO */
|
||||||
|
/* reserved */
|
||||||
|
//_PAD_CFG_STRUCT(GPP_A19, 0xffffffff, 0xffffffff), /* ISH_GP1 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A20, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A21, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A22, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A23, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
|
||||||
|
/* GPIO Group GPP_B */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B0, 0x44000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B1, 0x44000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B2, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B3, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B4, 0x44000301, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B5, 0x44000301, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B6, 0x84000301, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B7, 0x44000301, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B8, 0x44000301, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B9, 0x44000301, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B10, 0x44000301, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B11, 0x44000200, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B12, 0x44000700, 0x00000010), /* SLP_S0# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B13, 0x44000700, 0x00000010), /* PLTRST# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B14, 0x84000700, 0x00000010), /* SPKR */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B15, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B16, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B17, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B18, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B19, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B20, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B21, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B22, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_B23, 0x40000b00, 0x00000010), /* PCHHOT# */
|
||||||
|
|
||||||
|
/* GPIO Group GPP_C */
|
||||||
|
/* reserved */
|
||||||
|
//_PAD_CFG_STRUCT(GPP_C0, 0x44000700, 0x00000010), /* SMBCLK */
|
||||||
|
//_PAD_CFG_STRUCT(GPP_C1, 0x44000700, 0x00000010), /* SMBDATA */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C2, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
/* reserved */
|
||||||
|
//_PAD_CFG_STRUCT(GPP_C3, 0x44000700, 0x00000010), /* SML0CLK */
|
||||||
|
//_PAD_CFG_STRUCT(GPP_C4, 0x44000700, 0x00000010), /* SML0DATA */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C5, 0x44000201, 0x00000010), /* GPIO */
|
||||||
|
/* reserved */
|
||||||
|
//_PAD_CFG_STRUCT(GPP_C6, 0x44000700, 0x00000010), /* SML1CLK */
|
||||||
|
//_PAD_CFG_STRUCT(GPP_C7, 0x44000700, 0x00000010), /* SML1DATA */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C8, 0x84000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C9, 0x84000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C10, 0x84000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C11, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C12, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C13, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C14, 0x84000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C15, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C16, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C17, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C18, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C19, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C20, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C21, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C22, 0x42040100, 0x00003010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_C23, 0x84000300, 0x00000010), /* GPIO */
|
||||||
|
|
||||||
|
/* GPIO Group GPP_D */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D0, 0x84000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D1, 0x44000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D2, 0x42020100, 0x00003000), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D3, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D4, 0x84000200, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D5, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D6, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D7, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D8, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D9, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D10, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D11, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D12, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D13, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D14, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D15, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D16, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D17, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D18, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D19, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D20, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D21, 0x44000200, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D22, 0x04000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_D23, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
|
||||||
|
/* GPIO Group GPP_E */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E0, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E1, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E2, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E3, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E4, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E5, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E6, 0x82020100, 0x00003000), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E7, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E8, 0x44000700, 0x00000010), /* SATA_LED# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E9, 0x44000700, 0x00000010), /* USB_OC0# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E10, 0x44000700, 0x00000010), /* USB_OC1# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E11, 0x44000700, 0x00000010), /* USB_OC2# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_E12, 0x44000700, 0x00000010), /* USB_OC3# */
|
||||||
|
|
||||||
|
/* GPIO Group GPP_F */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F0, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F1, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F2, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F3, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F4, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F5, 0x80100100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F6, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F7, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F8, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F9, 0x84000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F10, 0x44000700, 0x00000010), /* SATA_SCLOCK */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F11, 0x44000700, 0x00000010), /* SATA_SLOAD */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F12, 0x44000700, 0x00000010), /* SATA_SDATAOUT1 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F13, 0x44000700, 0x00000010), /* SATA_SDATAOUT2 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F14, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F15, 0x44000700, 0x00000010), /* USB_OC4# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F16, 0x44000700, 0x00000010), /* USB_OC5# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F17, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F18, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F19, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F20, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F21, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F22, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_F23, 0x04000200, 0x00000010), /* GPIO */
|
||||||
|
|
||||||
|
/* GPIO Group GPP_G */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G0, 0x44000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G1, 0x44000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G2, 0x44000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G3, 0x44000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G4, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G5, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G6, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G7, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G8, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G9, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G10, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G11, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G12, 0x84000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G13, 0x84000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G14, 0x84000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G15, 0x84000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G16, 0x84000100, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G17, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G18, 0x44000700, 0x00000010), /* NMI# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G19, 0x44000700, 0x00000010), /* SMI# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G20, 0x44000300, 0x00000000), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G21, 0x44000300, 0x00000000), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G22, 0x44000300, 0x00000000), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_G23, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
|
||||||
|
/* GPIO Group GPP_H */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H0, 0x44000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H1, 0x84000101, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H2, 0x44000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H3, 0x44000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H4, 0x84000101, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H5, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H6, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H7, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H8, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H9, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H10, 0x44000700, 0x00000010), /* SML2CLK */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H11, 0x44000700, 0x00000010), /* SML2DATA */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H12, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H13, 0x44000700, 0x00000010), /* SML3CLK */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H14, 0x44000700, 0x00000010), /* SML3DATA */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H15, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H16, 0x44000700, 0x00000010), /* SML4CLK */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H17, 0x44000700, 0x00000010), /* SML4DATA */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H18, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H19, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H20, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H21, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H22, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_H23, 0x84000201, 0x00000010), /* GPIO */
|
||||||
|
|
||||||
|
/* GPIO Group GPP_I */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I0, 0x44000700, 0x00000010), /* DDPB_HPD0 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I1, 0x44000700, 0x00000010), /* DDPC_HPD1 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I2, 0x44000700, 0x00000010), /* DDPD_HPD2 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I3, 0x84000700, 0x00000010), /* DDPE_HPD3 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I4, 0x44000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I5, 0x44000700, 0x00000010), /* DDPB_CTRLCLK */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I6, 0x44000700, 0x00000010), /* DDPB_CTRLDATA */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I7, 0x44000700, 0x00000010), /* DDPC_CTRLCLK */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I8, 0x44000700, 0x00000010), /* DDPC_CTRLDATA */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I9, 0x44000700, 0x00000010), /* DDPD_CTRLCLK */
|
||||||
|
_PAD_CFG_STRUCT(GPP_I10, 0x44000700, 0x00000010), /* DDPD_CTRLDATA */
|
||||||
|
|
||||||
|
/* GPIO Group GPD */
|
||||||
|
_PAD_CFG_STRUCT(GPD0, 0x04000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPD1, 0x04000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPD2, 0x04000700, 0x00000010), /* LAN_WAKE# */
|
||||||
|
_PAD_CFG_STRUCT(GPD3, 0x04000700, 0x00000010), /* PWRBTN# */
|
||||||
|
_PAD_CFG_STRUCT(GPD4, 0x04000700, 0x00000010), /* SLP_S3# */
|
||||||
|
_PAD_CFG_STRUCT(GPD5, 0x04000700, 0x00000010), /* SLP_S4# */
|
||||||
|
_PAD_CFG_STRUCT(GPD6, 0x04000700, 0x00000010), /* SLP_A# */
|
||||||
|
_PAD_CFG_STRUCT(GPD7, 0x04000301, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPD8, 0x04000700, 0x00000010), /* SUSCLK */
|
||||||
|
_PAD_CFG_STRUCT(GPD9, 0x04000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPD10, 0x04000300, 0x00000010), /* GPIO */
|
||||||
|
_PAD_CFG_STRUCT(GPD11, 0x04000300, 0x00000010), /* GPIO */
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Early pad configuration in romstage. */
|
||||||
|
static const struct pad_config early_gpio_table[] = {
|
||||||
|
/* GPIO Group GPP_A */
|
||||||
|
/* LPC */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A1, 0x44000700, 0x00000010), /* LAD0 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A2, 0x44000700, 0x00000010), /* LAD1 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A3, 0x44000700, 0x00000010), /* LAD2 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A4, 0x44000700, 0x00000010), /* LAD3 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A5, 0x44000700, 0x00000010), /* LFRAME# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A8, 0x44000700, 0x00000010), /* CLKRUN# */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A9, 0x44000700, 0x00000010), /* CLKOUT_LPC0 */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A10, 0x44000700, 0x00000010), /* CLKOUT_LPC1 */
|
||||||
|
|
||||||
|
/* Serial interrupt */
|
||||||
|
_PAD_CFG_STRUCT(GPP_A6, 0x44000700, 0x00000010), /* SERIRQ */
|
||||||
|
};
|
||||||
|
|
||||||
|
#endif /* _GPIO_X11SSM_F_H */
|
||||||
|
|
@ -0,0 +1,34 @@
|
||||||
|
/*
|
||||||
|
* This file is part of the coreboot project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation; version 2 of the License.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <mainboard.h>
|
||||||
|
#include <device/device.h>
|
||||||
|
#include <intelblocks/itss.h>
|
||||||
|
#include <intelblocks/pcr.h>
|
||||||
|
#include <soc/itss.h>
|
||||||
|
#include <soc/pcr_ids.h>
|
||||||
|
|
||||||
|
void variant_mainboard_init(struct device *dev)
|
||||||
|
{
|
||||||
|
/* TODO:
|
||||||
|
* Find out why the polarities from gpio.h gets overwritten by FSP.
|
||||||
|
* This sets irq polarity to the same values as vendor
|
||||||
|
* but I do not know if this is really needed....
|
||||||
|
*/
|
||||||
|
itss_set_irq_polarity(33, 0);
|
||||||
|
itss_set_irq_polarity(34, 0);
|
||||||
|
|
||||||
|
// TODO: NMI; is this needed? vendor sets it
|
||||||
|
pcr_write32(0xae, 0x01e4, 0x00000004);
|
||||||
|
pcr_write32(0xae, 0x01e8, 0x00000040);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,124 @@
|
||||||
|
chip soc/intel/skylake
|
||||||
|
|
||||||
|
# GPE configuration
|
||||||
|
# Note that GPE events called out in ASL code rely on this
|
||||||
|
# route. i.e. If this route changes then the affected GPE
|
||||||
|
# offset bits also need to be changed.
|
||||||
|
register "gpe0_dw0" = "GPP_G"
|
||||||
|
register "gpe0_dw1" = "GPP_D"
|
||||||
|
register "gpe0_dw2" = "GPP_E"
|
||||||
|
|
||||||
|
register "gen1_dec" = "0x007c0a01" # Super IO SWC
|
||||||
|
register "gen2_dec" = "0x000c0ca1" # IPMI KCS
|
||||||
|
register "gen3_dec" = "0x000c03e1" # UART3
|
||||||
|
register "gen4_dec" = "0x000c02e1" # UART4
|
||||||
|
|
||||||
|
# PCIe configuration
|
||||||
|
register "PcieRpEnable[0]" = "1" # Enable PCH PCIe Port 1 / PCH SLOT4
|
||||||
|
register "PcieRpEnable[4]" = "1" # Enable PCH PCIe Port 5 / PCH SLOT5
|
||||||
|
register "PcieRpEnable[8]" = "1" # Enable PCH PCIe Port 9 / GbE 1
|
||||||
|
register "PcieRpEnable[9]" = "1" # Enable PCH PCIe Port 10 / GbE 2
|
||||||
|
register "PcieRpEnable[10]" = "1" # Enable PCH PCIe Port 11 / Aspeed 2400 VGA
|
||||||
|
|
||||||
|
# USB configuration
|
||||||
|
# USB0/1
|
||||||
|
register "usb2_ports[5]" = "USB2_PORT_MID(OC2)"
|
||||||
|
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)"
|
||||||
|
|
||||||
|
# USB2/3
|
||||||
|
register "usb2_ports[3]" = "USB2_PORT_MID(OC1)"
|
||||||
|
register "usb2_ports[2]" = "USB2_PORT_MID(OC1)"
|
||||||
|
|
||||||
|
# USB4/5
|
||||||
|
register "usb2_ports[7]" = "USB2_PORT_MID(OC0)"
|
||||||
|
register "usb2_ports[6]" = "USB2_PORT_MID(OC0)"
|
||||||
|
|
||||||
|
# USB6/7 (USB3.0)
|
||||||
|
register "usb2_ports[11]" = "USB2_PORT_MID(OC4)"
|
||||||
|
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC4)"
|
||||||
|
register "usb2_ports[10]" = "USB2_PORT_MID(OC4)"
|
||||||
|
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC4)"
|
||||||
|
|
||||||
|
# USB8/9 (USB3.0)
|
||||||
|
register "usb2_ports[1]" = "USB2_PORT_MID(OC3)"
|
||||||
|
register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC3)"
|
||||||
|
register "usb2_ports[0]" = "USB2_PORT_MID(OC3)"
|
||||||
|
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)"
|
||||||
|
|
||||||
|
# USB10 (USB3.0)
|
||||||
|
register "usb2_ports[9]" = "USB2_PORT_MID(OC5)"
|
||||||
|
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC5)"
|
||||||
|
|
||||||
|
# IPMI USB HUB
|
||||||
|
register "usb2_ports[8]" = "USB2_PORT_MID(OC_SKIP)"
|
||||||
|
|
||||||
|
device domain 0 on
|
||||||
|
device pci 01.0 on # CPU PCIe Port (x16) / PCIe Slot 6 (JPCIE6)
|
||||||
|
smbios_slot_desc "SlotTypePciExpressGen3X16" "SlotLengthLong" "CPU SLOT6 PCI-E 3.0 X8(IN X16)" "SlotDataBusWidth8X"
|
||||||
|
end
|
||||||
|
device pci 01.1 on # CPU PCIe Port (x8) / PCIe Slot 7 (JPCIE7)
|
||||||
|
smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthShort" "CPU SLOT7 PCI-E 3.0 X8" "SlotDataBusWidth8X"
|
||||||
|
end
|
||||||
|
device pci 1c.0 on # PCH PCIe Port 1 / PCIe Slot 4 (JPCIE4)
|
||||||
|
smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthShort" "PCH SLOT4 PCI-E 3.0 X4(IN X8)" "SlotDataBusWidth4X"
|
||||||
|
end
|
||||||
|
device pci 1c.4 on # PCH PCIe Port 5 / PCIe Slot 5 (JPCIE5)
|
||||||
|
smbios_slot_desc "SlotTypePciExpressGen3X8" "SlotLengthShort" "PCH SLOT5 PCI-E 3.0 X4(IN X8)" "SlotDataBusWidth4X"
|
||||||
|
end
|
||||||
|
device pci 1d.0 on # PCH PCIe Port 9
|
||||||
|
device pci 00.0 on end # GbE 1
|
||||||
|
end
|
||||||
|
device pci 1d.1 on # PCH PCIe Port 10
|
||||||
|
device pci 00.1 on end # GbE 2
|
||||||
|
end
|
||||||
|
device pci 1d.2 on # PCH PCIe Port 11
|
||||||
|
device pci 00.0 on # Aspeed PCI Bridge
|
||||||
|
device pci 00.0 on end # Aspeed 2400 VGA
|
||||||
|
end
|
||||||
|
end
|
||||||
|
device pci 1f.0 on # LPC Interface
|
||||||
|
chip drivers/ipmi
|
||||||
|
# On cold boot it takes a while for the BMC to start the IPMI service
|
||||||
|
register "wait_for_bmc" = "1"
|
||||||
|
register "bmc_boot_timeout" = "60"
|
||||||
|
device pnp ca2.0 on end # IPMI KCS
|
||||||
|
end
|
||||||
|
chip superio/common
|
||||||
|
device pnp 2e.0 on
|
||||||
|
chip superio/aspeed/ast2400
|
||||||
|
device pnp 2e.2 on # SUART1 / COM1 (ext)
|
||||||
|
io 0x60 = 0x3f8
|
||||||
|
irq 0x70 = 4
|
||||||
|
end
|
||||||
|
device pnp 2e.3 on # SUART2 / COM2 (int)
|
||||||
|
io 0x60 = 0x2f8
|
||||||
|
irq 0x70 = 3
|
||||||
|
end
|
||||||
|
device pnp 2e.4 on # SWC
|
||||||
|
io 0x60 = 0xa00
|
||||||
|
io 0x62 = 0xa10
|
||||||
|
io 0x64 = 0xa20
|
||||||
|
io 0x66 = 0xa30
|
||||||
|
irq 0x70 = 0xb
|
||||||
|
end
|
||||||
|
device pnp 2e.5 off end # KBC
|
||||||
|
device pnp 2e.7 on end # GPIO
|
||||||
|
device pnp 2e.b on # SUART3
|
||||||
|
io 0x60 = 0x3e8
|
||||||
|
irq 0x70 = 4
|
||||||
|
end
|
||||||
|
device pnp 2e.c on # SUART4
|
||||||
|
io 0x60 = 0x2e8
|
||||||
|
irq 0x70 = 3
|
||||||
|
end
|
||||||
|
device pnp 2e.d on end # iLPC2AHB
|
||||||
|
device pnp 2e.e on # Mailbox
|
||||||
|
io 0x60 = 0xa40
|
||||||
|
irq 0x70 = 0x00
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
|
end
|
||||||
Loading…
Reference in New Issue