From 7f2c29b6d6c3d89bc92ad76517821848ed8c23d2 Mon Sep 17 00:00:00 2001 From: Marc Jones Date: Wed, 26 Apr 2017 21:55:03 -0600 Subject: [PATCH] amd/pi/hudson: Add config option for ACPI base Add a configuration option to assign the binaryPI base address for the ACPI registers. The binaryPI's assignment is determine at build time and no run-time configuration is allowed. Change-Id: Ida17022abfa6faceb0653c2cb87aacce4facef09 Signed-off-by: Marc Jones Reviewed-on: https://review.coreboot.org/19485 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin --- src/southbridge/amd/pi/hudson/Kconfig | 9 +++++++++ src/southbridge/amd/pi/hudson/hudson.h | 2 +- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/src/southbridge/amd/pi/hudson/Kconfig b/src/southbridge/amd/pi/hudson/Kconfig index 233260f026..25dbdb85cd 100644 --- a/src/southbridge/amd/pi/hudson/Kconfig +++ b/src/southbridge/amd/pi/hudson/Kconfig @@ -219,6 +219,15 @@ config SERIRQ_CONTINUOUS_MODE help Set this option to y for serial IRQ in continuous mode. Otherwise it is in quiet mode. + +config HUDSON_ACPI_IO_BASE + hex + default 0x400 if CPU_AMD_PI_00670F00_FP4 || CPU_AMD_PI_00670F00_FT4 + default 0x800 + help + Base address for the ACPI registers. + This value must match the hardcoded value of AGESA. + endif config HUDSON_UART diff --git a/src/southbridge/amd/pi/hudson/hudson.h b/src/southbridge/amd/pi/hudson/hudson.h index e20238f2c3..2ccd485b68 100644 --- a/src/southbridge/amd/pi/hudson/hudson.h +++ b/src/southbridge/amd/pi/hudson/hudson.h @@ -51,7 +51,7 @@ #define PM_YANG_SD_FLASH_CTRL 0xE8 #define PM_PCIB_CFG 0xEA -#define HUDSON_ACPI_IO_BASE 0x800 +#define HUDSON_ACPI_IO_BASE CONFIG_HUDSON_ACPI_IO_BASE #define ACPI_PM_EVT_BLK (HUDSON_ACPI_IO_BASE + 0x00) /* 4 bytes */ #define ACPI_PM1_CNT_BLK (HUDSON_ACPI_IO_BASE + 0x04) /* 2 bytes */ #define ACPI_PM_TMR_BLK (HUDSON_ACPI_IO_BASE + 0x18) /* 4 bytes */