sb/intel/common: Fix GPE0 related register conflict

When ACPI GPE0 block was extended to 64 events or 8 bytes,
ACPI PM register space was slightly modified. After
adjustment, PM2_CNT register moved to 0x50 where register
SS_CNT was previously defined to be.

For platforms that have a valid use for PM2_CNT==0x50 in
their FADT, remove overlapping definition of SS_CNT.

On i82801dx/gx ACPI GPE0 supports 32 events, reset_gpe0_status()
incorrectly addressed also GPE0_EN register. For a bit cleaner
implementation, define GPE0_HAS_64_EVENTS.

Change-Id: Iec83e9010146ebd487a61f542ac5c6f4c6a60833
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69669
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
This commit is contained in:
Kyösti Mälkki 2022-11-14 17:46:30 +02:00
parent 95932ba9b7
commit 806b2cd42b
6 changed files with 29 additions and 26 deletions

View File

@ -428,7 +428,6 @@ void early_usb_init(const struct southbridge_usb_port *portmap);
#define LV2 0x14
#define LV3 0x15
#define LV4 0x16
#define PM2_CNT 0x50 // mobile only
#define GPE0_STS 0x20
#define PME_B0_STS (1 << 13)
#define PME_STS (1 << 11)
@ -462,8 +461,9 @@ void early_usb_init(const struct southbridge_usb_port *portmap);
#define ALT_GP_SMI_STS 0x3a
#define GPE_CNTL 0x42
#define DEVACT_STS 0x44
#define SS_CNT 0x50
#define PM2_CNT 0x50 // mobile only
#define C3_RES 0x54
#define TCO1_STS 0x64
#define TCO1_TIMEOUT (1 << 3)
#define DMISCI_STS (1 << 9)

View File

@ -73,6 +73,7 @@ void dump_smi_status(u32 smi_sts)
{
printk(BIOS_DEBUG, "SMI_STS: ");
if (smi_sts & (1 << 26)) printk(BIOS_DEBUG, "SPI ");
if (smi_sts & (1 << 25)) printk(BIOS_DEBUG, "EL_SMI ");
if (smi_sts & (1 << 21)) printk(BIOS_DEBUG, "MONITOR ");
if (smi_sts & (1 << 20)) printk(BIOS_DEBUG, "PCI_EXP_SMI ");
if (smi_sts & (1 << 18)) printk(BIOS_DEBUG, "INTEL_USB2 ");
@ -100,12 +101,14 @@ void dump_smi_status(u32 smi_sts)
*/
u64 reset_gpe0_status(void)
{
u32 reg_h, reg_l;
u32 reg_h = 0, reg_l;
reg_l = read_pmbase32(GPE0_STS);
if (GPE0_HAS_64_EVENTS)
reg_h = read_pmbase32(GPE0_STS + 4);
/* set status bits are cleared by writing 1 to them */
write_pmbase32(GPE0_STS, reg_l);
if (GPE0_HAS_64_EVENTS)
write_pmbase32(GPE0_STS + 4, reg_h);
return (((u64)reg_h) << 32) | reg_l;
@ -128,7 +131,7 @@ void dump_gpe0_status(u64 gpe0_sts)
if (gpe0_sts & (1 << 8)) printk(BIOS_DEBUG, "RI ");
if (gpe0_sts & (1 << 7)) printk(BIOS_DEBUG, "SMB_WAK ");
if (gpe0_sts & (1 << 6)) printk(BIOS_DEBUG, "TCO_SCI ");
if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "USB5 ");
if (gpe0_sts & (1 << 5)) printk(BIOS_DEBUG, "AC97/USB5 ");
if (gpe0_sts & (1 << 4)) printk(BIOS_DEBUG, "USB2 ");
if (gpe0_sts & (1 << 3)) printk(BIOS_DEBUG, "USB1 ");
if (gpe0_sts & (1 << 2)) printk(BIOS_DEBUG, "SWGPE ");

View File

@ -5,6 +5,9 @@
#include <cpu/x86/smm.h>
#define GPE0_HAS_64_EVENTS \
(!(CONFIG(SOUTHBRIDGE_INTEL_I82801DX) || CONFIG(SOUTHBRIDGE_INTEL_I82801GX)))
#define D31F0_PMBASE 0x40
#define D31F0_GEN_PMCON_1 0xa0
#define SMI_LOCK (1 << 4)
@ -54,13 +57,18 @@
#define LV2 0x14
#define LV3 0x15
#define LV4 0x16
#if CONFIG(SOUTHBRIDGE_INTEL_I82801GX)
#if GPE0_HAS_64_EVENTS
#define GPE0_STS 0x20
#define GPE0_EN 0x28 // GPE0_STS + 8
#define PM2_CNT 0x50 // mobile only
#else
#define PM2_CNT 0x20 // mobile only
#define GPE0_STS 0x28
#else
#define PM2_CNT 0x50 // mobile only
#define GPE0_STS 0x20
#endif /* CONFIG(SOUTHBRIDGE_INTEL_I82801GX) */
#define GPE0_EN 0x2c // GPE0_STS + 4
#endif
/* def GPE0_STS */
#define USB4_STS (1 << 14) /* i82801gx only */
#define PME_B0_STS (1 << 13)
#define PME_STS (1 << 11)
@ -71,11 +79,8 @@
#define TCOSCI_STS (1 << 6)
#define SWGPE_STS (1 << 2)
#define HOT_PLUG_STS (1 << 1)
#if CONFIG(SOUTHBRIDGE_INTEL_I82801GX)
#define GPE0_EN 0x2c
#else
#define GPE0_EN 0x28
#endif /* CONFIG(SOUTHBRIDGE_INTEL_I82801GX) */
/* def GPE0_EN */
#define PME_B0_EN (1 << 13)
#define PME_EN (1 << 11)
#define TCOSCI_EN (1 << 6)
@ -98,8 +103,7 @@
#define ALT_GP_SMI_STS 0x3a
#define GPE_CNTL 0x42
#define DEVACT_STS 0x44
#define SS_CNT 0x50
#define C3_RES 0x54
#define TCO1_STS 0x64
#define DMISCI_STS (1 << 9)
#define BOOT_STS (1 << 18)

View File

@ -113,9 +113,6 @@ void i82801dx_early_init(void);
#define PM1_TMR 0x08
#define PROC_CNT 0x10
#define LV2 0x14
#define LV3 0x15
#define LV4 0x16
#define PM2_CNT 0x20 // mobile only
#define GPE0_STS 0x28
#define PME_B0_STS (1 << 13)
#define USB3_STS (1 << 12)
@ -155,7 +152,6 @@ void i82801dx_early_init(void);
#define GPE_CNTL 0x42
#define DEVACT_STS 0x44
#define SS_CNT 0x50
#define C3_RES 0x54
#define TCOBASE 0x60 /* TCO Base Address Register */
#define TCO1_CNT 0x08 /* TCO1 Control Register */

View File

@ -409,7 +409,6 @@ void pch_enable(struct device *dev);
#define LV2 0x14
#define LV3 0x15
#define LV4 0x16
#define PM2_CNT 0x50 // mobile only
#define GPE0_STS 0x20
#define PME_B0_STS (1 << 13)
#define PME_STS (1 << 11)
@ -443,8 +442,9 @@ void pch_enable(struct device *dev);
#define ALT_GP_SMI_STS 0x3a
#define GPE_CNTL 0x42
#define DEVACT_STS 0x44
#define SS_CNT 0x50
#define PM2_CNT 0x50 // mobile only
#define C3_RES 0x54
#define TCO1_STS 0x64
#define DMISCI_STS (1 << 9)
#define TCO2_STS 0x66

View File

@ -581,7 +581,6 @@ void mainboard_config_rcba(void);
#define LV2 0x14
#define LV3 0x15
#define LV4 0x16
#define PM2_CNT 0x50 // mobile only
#define GPE0_STS 0x20
#define PME_B0_STS (1 << 13)
#define PME_STS (1 << 11)
@ -617,8 +616,9 @@ void mainboard_config_rcba(void);
#define ALT_GP_SMI_STS 0x3a
#define GPE_CNTL 0x42
#define DEVACT_STS 0x44
#define SS_CNT 0x50
#define PM2_CNT 0x50 // mobile only
#define C3_RES 0x54
#define TCO1_STS 0x64
#define DMISCI_STS (1 << 9)
#define TCO2_STS 0x66