IT8772F: Clean up it8772f includes and add a LED API
- Remove it8772f c includes - Add a new LED API, it8772f_gpio_led - Stumpy: using it8772f_gpio_led BUG=chrome-os-partner:28232 BRANCH=Guado TEST=emerge-guado coreboot chromeos-bootimage Change-Id: I08de52515d3c1e7e85d1761c09a0cebffda7dda3 Signed-off-by: David Wu <David_Wu@quantatw.com> Reviewed-on: https://chromium-review.googlesource.com/241813 Tested-by: David Wu <david_wu@quantatw.com> Reviewed-by: Shawn N <shawnn@chromium.org> Commit-Queue: David Wu <david_wu@quantatw.com> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/12797 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
This commit is contained in:
parent
0fa4f6f23d
commit
80ef7b778e
|
@ -155,7 +155,10 @@ static void setup_sio_gpios(void)
|
|||
/*
|
||||
* GPIO45 as LED_POWER#
|
||||
*/
|
||||
it8772f_gpio_setup(DUMMY_DEV, 4, 0x20, 0x20, 0x20, 0x20, 0x20);
|
||||
it8772f_gpio_led(DUMMY_DEV, 4 /* set */, (0x1<<5) /* select */,
|
||||
0x00 /* polarity: non-inverting */, 0x00 /* 0=pulldown */,
|
||||
(0x1<<5) /* output */, (0x1<<5) /* 1=Simple IO function */,
|
||||
SIO_GPIO_BLINK_GPIO45, IT8772F_GPIO_BLINK_FREQUENCY_1_HZ);
|
||||
|
||||
/*
|
||||
* GPIO51 as USBPWRON8#
|
||||
|
|
|
@ -22,44 +22,32 @@
|
|||
#include <northbridge/intel/sandybridge/sandybridge.h>
|
||||
#include <cpu/intel/model_206ax/model_206ax.h>
|
||||
|
||||
/* FIXME: Include romstage serial for SIO helper functions */
|
||||
#include <superio/ite/it8772f/early_init.c>
|
||||
//#include <superio/ite/it8772f/it8772f.h>
|
||||
/* Include for SIO helper functions */
|
||||
#include <superio/ite/it8772f/it8772f.h>
|
||||
#define DUMMY_DEV PNP_DEV(0x2e, 0)
|
||||
|
||||
/*
|
||||
* Change LED_POWER# (SIO GPIO 45) state based on sleep type.
|
||||
* The IO address is hardcoded as we don't have device path in SMM.
|
||||
*/
|
||||
#define SIO_GPIO_BASE_SET4 (0x730 + 3)
|
||||
#define SIO_GPIO_BLINK_GPIO45 0x25
|
||||
*/
|
||||
void mainboard_smi_sleep(u8 slp_typ)
|
||||
{
|
||||
u8 reg8;
|
||||
|
||||
printk(BIOS_DEBUG, "SMI: sleep S%d\n", slp_typ);
|
||||
switch (slp_typ) {
|
||||
case 3:
|
||||
case 4:
|
||||
/* Blink LED */
|
||||
it8772f_enter_conf(DUMMY_DEV);
|
||||
it8772f_sio_write(DUMMY_DEV, IT8772F_CONFIG_REG_LDN, IT8772F_GPIO);
|
||||
/* Enable blink pin map */
|
||||
it8772f_sio_write(DUMMY_DEV, IT8772F_GPIO_LED_BLINK1_PINMAP,
|
||||
SIO_GPIO_BLINK_GPIO45);
|
||||
/* Enable 4HZ blink */
|
||||
it8772f_sio_write(DUMMY_DEV, IT8772F_GPIO_LED_BLINK1_CONTROL, 0x02);
|
||||
/* Set GPIO to alternate function */
|
||||
reg8 = it8772f_sio_read(DUMMY_DEV, GPIO_REG_ENABLE(3));
|
||||
reg8 &= ~(1 << 5);
|
||||
it8772f_sio_write(DUMMY_DEV, GPIO_REG_ENABLE(3), reg8);
|
||||
it8772f_exit_conf(DUMMY_DEV);
|
||||
it8772f_gpio_led(DUMMY_DEV, 4 /* set */, (0x1<<5) /* select */,
|
||||
(0x1<<5) /* polarity */, (0x1<<5) /* 1=pullup */,
|
||||
(0x1<<5) /* output */, 0x00, /* 0=Alternate function */
|
||||
SIO_GPIO_BLINK_GPIO45, IT8772F_GPIO_BLINK_FREQUENCY_1_HZ);
|
||||
break;
|
||||
|
||||
case 5:
|
||||
/* Turn off LED */
|
||||
reg8 = inb(SIO_GPIO_BASE_SET4);
|
||||
reg8 |= (1 << 5);
|
||||
outb(reg8, SIO_GPIO_BASE_SET4);
|
||||
it8772f_gpio_led(DUMMY_DEV, 4 /* set */, (0x1<<5) /* select */,
|
||||
0x00 /* polarity: non-inverting */, 0x00 /* 0=pulldown */,
|
||||
(0x1<<5) /* output */, (0x1<<5) /* 1=Simple IO function */,
|
||||
SIO_GPIO_BLINK_GPIO45, IT8772F_GPIO_BLINK_FREQUENCY_1_HZ);
|
||||
break;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
|
|
@ -16,3 +16,4 @@
|
|||
|
||||
romstage-$(CONFIG_SUPERIO_ITE_IT8772F) += early_init.c
|
||||
ramstage-$(CONFIG_SUPERIO_ITE_IT8772F) += superio.c
|
||||
smm-$(CONFIG_SUPERIO_ITE_IT8772F) += early_init.c
|
||||
|
|
|
@ -81,3 +81,22 @@ void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity,
|
|||
it8772f_sio_write(dev, GPIO_REG_PULLUP(set), pullup);
|
||||
it8772f_exit_conf(dev);
|
||||
}
|
||||
|
||||
/* Configure LED GPIOs */
|
||||
void it8772f_gpio_led(pnp_devfn_t dev,int set, u8 select, u8 polarity, u8 pullup,
|
||||
u8 output, u8 enable, u8 led_pin_map, u8 led_freq)
|
||||
{
|
||||
set--; /* Set 1 is offset 0 */
|
||||
it8772f_enter_conf(dev);
|
||||
it8772f_sio_write(dev, IT8772F_CONFIG_REG_LDN, IT8772F_GPIO);
|
||||
if (set < 5) {
|
||||
it8772f_sio_write(dev, IT8772F_GPIO_LED_BLINK1_PINMAP, led_pin_map);
|
||||
it8772f_sio_write(dev, IT8772F_GPIO_LED_BLINK1_CONTROL, led_freq);
|
||||
it8772f_sio_write(dev, GPIO_REG_SELECT(set), select);
|
||||
it8772f_sio_write(dev, GPIO_REG_ENABLE(set), enable);
|
||||
it8772f_sio_write(dev, GPIO_REG_POLARITY(set), polarity);
|
||||
}
|
||||
it8772f_sio_write(dev, GPIO_REG_OUTPUT(set), output);
|
||||
it8772f_sio_write(dev, GPIO_REG_PULLUP(set), pullup);
|
||||
it8772f_exit_conf(dev);
|
||||
}
|
||||
|
|
|
@ -92,12 +92,29 @@
|
|||
|
||||
/* GPIO interface */
|
||||
#define IT8772F_GPIO_LED_BLINK1_PINMAP 0xf8
|
||||
|
||||
#define SIO_GPIO_BLINK_GPIO10 0x08
|
||||
#define SIO_GPIO_BLINK_GPIO45 0x25
|
||||
|
||||
#define IT8772F_GPIO_LED_BLINK1_CONTROL 0xf9
|
||||
|
||||
#define IT8772F_GPIO_BLINK_FREQUENCY_4_HZ (0<<1)
|
||||
#define IT8772F_GPIO_BLINK_FREQUENCY_1_HZ (1<<1)
|
||||
#define IT8772F_GPIO_BLINK_FREQUENCY_1_4_HZ (2<<1)
|
||||
#define IT8772F_GPIO_BLINK_FREQUENCY_1_8_HZ (3<<1)
|
||||
|
||||
#define GPIO_REG_SELECT(x) (0x25 + (x))
|
||||
|
||||
/* GPIO Polarity Select: 1: Inverting, 0: Non-inverting */
|
||||
#define GPIO_REG_POLARITY(x) (0xb0 + (x))
|
||||
|
||||
/* GPIO Inernal Pull-up: 1: Enable, 0: Disable */
|
||||
#define GPIO_REG_PULLUP(x) (0xb8 + (x))
|
||||
|
||||
/* GPIO Fucntion Select: 1: Simple I/O, 0: Alternate function */
|
||||
#define GPIO_REG_ENABLE(x) (0xc0 + (x))
|
||||
|
||||
/* GPIO Mode: 0: input mode, 1: output mode */
|
||||
#define GPIO_REG_OUTPUT(x) (0xc8 + (x))
|
||||
|
||||
#include <arch/io.h>
|
||||
|
@ -116,5 +133,8 @@ void it8772f_gpio_setup(pnp_devfn_t dev, int set, u8 select, u8 polarity,
|
|||
|
||||
void it8772f_enter_conf(pnp_devfn_t dev);
|
||||
void it8772f_exit_conf(pnp_devfn_t dev);
|
||||
void it8772f_gpio_led(pnp_devfn_t dev, int set, u8 select, u8 polarity, u8 pullup,
|
||||
u8 output, u8 enable, u8 led_pin_map, u8 led_freq);
|
||||
|
||||
|
||||
#endif /* SUPERIO_ITE_IT8772F_H */
|
||||
|
|
Loading…
Reference in New Issue