mb/google/dedede/var/corori: Configure I2C times for Touchpad

Configure I2C high / low time in the device tree to ensure Touchpad
I2C CLK runs accurately between 380 kHz and 400 kHz.

Measured I2C frequency just as below after tuning:
Touch Pad CLK: 389.2 KHz

BUG=b:202787528
TEST=Build and check after tuning I2C clock is between 380 kHz and 400 kHz

Change-Id: I0f9d062fc611de0062a39849aee1174268391682
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58238
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>

src/mainboard/google/dedede/variants/corori/overridetree.cb

@@ -39,6 +39,8 @@ chip soc/intel/jasperlake
 	register "common_soc_config" = "{
 		.i2c[0] = {
 			.speed = I2C_SPEED_FAST,
+			.rise_time_ns = 255,
+			.fall_time_ns = 14,
 		},
 		.i2c[4] = {
 			.speed = I2C_SPEED_FAST,