soc/qualcomm/common: Add sdhci_msm_init function

Porting from depthcharge changes for supporting eMMC driver
functionality with standard SDHC controller on Qualcomm chipsets.
sdhci_msm_init() needs to be run before the standard
sdhci_mem_controller initiailzation.

BUG=b:254092907
BRANCH=None
TEST=emerge-herobrine coreboot

Change-Id: I6f4fd1360af1082b335f9cc3046871ce9963b5d0
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72634
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

src/soc/qualcomm/common/include/soc/sdhci_msm.h

@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef __SDHCI_MSM_H__
+#define __SDHCI_MSM_H__
+
+#include "soc/sdhci.h"
+
+/* SDHC specific defines */
+#define SDCC_HC_VENDOR_SPECIFIC_FUNC3	0x250
+#define VENDOR_SPEC_FUN3_POR_VAL	0x02226040
+#define SDCC_HC_VENDOR_SPECIFIC_CAPABILITIES0	0x21C
+
+struct sd_mmc_ctrlr *new_sdhci_msm_host(void *ioaddr);
+
+#endif /* __SDHCI_MSM_H__ */

src/soc/qualcomm/common/storage/sdhci_msm.c

@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <commonlib/sd_mmc_ctrlr.h>
+#include <commonlib/sdhci.h>
+#include <commonlib/storage/sdhci.h>
+#include <delay.h>
+#include <soc/sdhci_msm.h>
+
+/*
+ * msm specific SDHC initialization.  This is ported from depthcharge's
+ * sdhci_msm_init().
+ */
+static int sdhci_msm_init(struct sdhci_ctrlr *host)
+{
+	uint32_t vendor_caps = 0;
+
+	printk(BIOS_INFO, "Initializing SDHCI MSM host controller!\n");
+
+	/* Read host controller capabilities */
+	vendor_caps = sdhci_readl(host, SDHCI_CAPABILITIES);
+
+	/*
+	 * Explicitly enable the capabilities which are not advertised
+	 * by default
+	 */
+	vendor_caps |= SDHCI_CAN_VDD_180 | SDHCI_CAN_DO_8BIT;
+
+	/*
+	 * Update internal capabilities register so that these updated values
+	 * will get reflected in SDHCI_CAPABILITEIS register.
+	 */
+	sdhci_writel(host, vendor_caps, SDCC_HC_VENDOR_SPECIFIC_CAPABILITIES0);
+
+	/*
+	 * Reset the vendor spec register to power on reset state.
+	 * This is to ensure that this register is set to right value
+	 * incase if this register get updated by bootrom when using SDHCI boot.
+	 */
+	sdhci_writel(host, VENDOR_SPEC_FUN3_POR_VAL,
+		     SDCC_HC_VENDOR_SPECIFIC_FUNC3);
+
+	/*
+	 * Set SD power off, otherwise reset will result in pwr irq.
+	 * And without setting bus off status, reset would fail.
+	 */
+	sdhci_writeb(host, 0x0, SDHCI_POWER_CONTROL);
+	udelay(10);
+
+	return 0;
+}
+
+
+/*
+ * This function is a wrapper around new_mem_sdhci_controller().  It initializes
+ * the pre_init callback function to sdhci_msm_init(), which takes care of any
+ * msm initialization before the actual sdhci initialization is executed.
+ */
+struct sd_mmc_ctrlr *new_sdhci_msm_host(void *ioaddr)
+{
+	struct sd_mmc_ctrlr *host;
+
+	host = new_mem_sdhci_controller(ioaddr, sdhci_msm_init);
+	if (host == NULL)
+		printk(BIOS_ERR, "Error initializing SDHCI MSM host controller!\n");
+
+	return host;
+}