mb/google/dedede: Support variant specific power limits

With newer dedede design, it's required to config corresponding
psyspmax, psyspl1, psyspl2, pl1 and pl2 by different kinds of
adapter.

BUG=b:281479111
TEST=emerge-dedede coreboot and check correct value on dibbi

Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Change-Id: I583c930379233322c41027805369f81d02000ee7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75680
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>

src/mainboard/google/dedede/variants/baseboard/Makefile.inc

@@ -4,5 +4,6 @@ romstage-y += gpio.c
 romstage-y += memory.c
 
 ramstage-y += gpio.c
+ramstage-y += ramstage.c
 
 smm-y += gpio.c

src/mainboard/google/dedede/variants/baseboard/include/baseboard/variants.h

@@ -48,6 +48,30 @@ void variant_smi_sleep(u8 slp_typ);
 /* Modify devictree settings during ramstage. */
 void variant_devtree_update(void);
 
+struct psys_config {
+	/*
+	 * The efficiency of type-c chargers
+	 * For example, 'efficiency = 97' means setting 97% of max power to account for
+	 * cable loss and FET Rdson loss in the path from the source.
+	 */
+	unsigned int efficiency;
+
+	/* The maximum current maps to the Psys signal */
+	unsigned int psys_imax_ma;
+
+	/* The voltage of barrel jack */
+	unsigned int bj_volts_mv;
+
+	/* The barrel jack power */
+	unsigned int bj_power_w;
+};
+
+/*
+ * Modify Power Limit and PsysPL devictree settings during ramstage.
+ * Note, this function must be called in front of calling variant_update_power_limits.
+ */
+void variant_update_psys_power_limits(const struct psys_config *config);
+
 /* Modify LTE devictree settings during ramstage. */
 void update_lte_device(struct acpi_gpio *lte_reset_gpio, struct acpi_gpio *lte_enable_gpio);
 

src/mainboard/google/dedede/variants/baseboard/ramstage.c

@@ -0,0 +1,83 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <acpi/acpi_device.h>
+#include <baseboard/variants.h>
+#include <console/console.h>
+#include <drivers/usb/acpi/chip.h>
+#include <fw_config.h>
+#include <gpio.h>
+#include <soc/pci_devs.h>
+#include <ec/google/chromeec/ec.h>
+#include <device/pci_ops.h>
+#include <intelblocks/power_limit.h>
+#include <chip.h>
+#include <drivers/intel/dptf/chip.h>
+#include <soc/pci_devs.h>
+
+#define SET_PSYSPL2(e, w) ((e) * (w) / 100)
+#define MICROWATTS_TO_WATTS 1000000
+
+static bool get_sku_index(size_t *intel_idx)
+{
+	uint16_t mch_id = pci_s_read_config16(PCI_DEV(0, 0, 0), PCI_DEVICE_ID);
+	uint8_t tdp = get_cpu_tdp();
+	size_t i = 0;
+
+	if (mch_id != 0xFFFF) {
+		for (i = 0; i < ARRAY_SIZE(cpuid_to_jsl); i++) {
+			if (mch_id == cpuid_to_jsl[i].pci_did &&
+					tdp == cpuid_to_jsl[i].cpu_tdp) {
+				*intel_idx = cpuid_to_jsl[i].limits;
+				break;
+			}
+		}
+	}
+
+	if (i == ARRAY_SIZE(cpuid_to_jsl) || mch_id == 0xFFFF) {
+		printk(BIOS_ERR, "Cannot find correct intel sku index.\n");
+		return false;
+	}
+
+	return true;
+}
+
+void variant_update_psys_power_limits(const struct psys_config *config_psys)
+{
+	struct soc_power_limits_config *soc_config;
+	size_t intel_idx = 0;
+	u16 volts_mv, current_ma;
+	enum usb_chg_type type;
+	u32 psys_pl2;
+	config_t *conf;
+	u32 watts;
+	int rv;
+
+	if (!get_sku_index(&intel_idx))
+		return;
+
+	conf = config_of_soc();
+	soc_config = &conf->power_limits_config[intel_idx];
+
+	rv = google_chromeec_get_usb_pd_power_info(&type, &current_ma, &volts_mv);
+
+	if (rv == 0 && type == USB_CHG_TYPE_PD) {
+		/* Detected USB-PD. Base on max value of adapter */
+		watts = ((u32)current_ma * volts_mv) / MICROWATTS_TO_WATTS;
+	} else {
+		/* Input type is barrel jack */
+		volts_mv = config_psys->bj_volts_mv;
+		watts = config_psys->bj_power_w;
+	}
+	/* Set psyspl2 to 97% of adapter rating */
+	psys_pl2 = SET_PSYSPL2(config_psys->efficiency, watts);
+
+	/* voltage unit is milliVolts and current is in milliAmps */
+	soc_config->psys_pmax = (u16)(((u32)config_psys->psys_imax_ma * volts_mv) / MICROWATTS_TO_WATTS);
+	conf->PsysPmax = soc_config->psys_pmax;
+
+	soc_config->tdp_psyspl2 = psys_pl2;
+
+	printk(BIOS_INFO, "Overriding PsysPL2 (%uW) Psys_Pmax (%uW)\n",
+			soc_config->tdp_psyspl2,
+			soc_config->psys_pmax);
+}