southbridge/amd/sb700: Add Suspend to RAM (S3) support

Change-Id: Ic643e31b721f11a90d8fb5f8c8f8a3b7892c0d73
Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
Reviewed-on: http://review.coreboot.org/11949
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

src/southbridge/amd/sb700/Makefile.inc

@@ -12,6 +12,7 @@ ramstage-y += pci.c
 ramstage-$(CONFIG_HAVE_ACPI_TABLES) += fadt.c
 romstage-y += reset.c
 ramstage-y += reset.c
+ramstage-y += spi.c
 romstage-$(CONFIG_USBDEBUG_IN_ROMSTAGE) += enable_usbdebug.c
 ramstage-$(CONFIG_USBDEBUG) += enable_usbdebug.c
 

src/southbridge/amd/sb700/early_setup.c

@@ -474,8 +474,10 @@ static void sb700_devices_por_init(void)
 	/* LPC Device, BDF:0-20-3 */
 	printk(BIOS_INFO, "sb700_devices_por_init(): LPC Device, BDF:0-20-3\n");
 	dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
-	/* DMA enable */
+	if (!IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_SB700_DISABLE_ISA_DMA)) {
-	pci_write_config8(dev, 0x40, 0x04);
+		/* DMA enable */
+		pci_write_config8(dev, 0x40, 0x04);
+	}
 
 	/* IO Port Decode Enable */
 	pci_write_config8(dev, 0x44, 0xFF);
@@ -618,6 +620,17 @@ static void sb700_pmio_por_init(void)
 	byte = pmio_read(0xB2);
 	byte |= 1 << 0;
 	pmio_write(0xB2, byte);
+
+	// FIXME: Enabling this causes boot to hang while initializing processors.
+// 	/* Enable automatic C1e state switch */
+// 	byte = pmio_read(0xc9);
+// 	byte |= 0x11;
+// 	pmio_write(0xc9, byte);
+
+	/* Enable precision HPET clock and automatic C state switch */
+	byte = pmio_read(0xbb);
+	byte |= 0xc0;
+	pmio_write(0xbb, byte);
 }
 
 /*
@@ -653,10 +666,12 @@ static void sb700_pci_cfg(void)
 	 * mentioned in RPR. But I keep them. The registers and the
 	 * comments are compatible. */
 	dev = pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
-	/* Enabling LPC DMA function. */
+	if (!IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_SB700_DISABLE_ISA_DMA)) {
-	byte = pci_read_config8(dev, 0x40);
+		/* Enabling LPC DMA function. */
-	byte |= (1 << 2);
+		byte = pci_read_config8(dev, 0x40);
-	pci_write_config8(dev, 0x40, byte);
+		byte |= (1 << 2);
+		pci_write_config8(dev, 0x40, byte);
+	}
 	/* Disabling LPC TimeOut. 0x48[7] clear. */
 	byte = pci_read_config8(dev, 0x48);
 	byte &= 0x7f;
@@ -746,6 +761,18 @@ int acpi_get_sleep_type(void)
 	return ((tmp & (7 << 10)) >> 10);
 }
 
+void set_lpc_sticky_ctl(bool enable)
+{
+	uint8_t byte;
+
+	byte = pmio_read(0xbb);
+	if (enable)
+		byte |= 0x20;
+	else
+		byte &= ~0x20;
+	pmio_write(0xbb, byte);
+}
+
 #if IS_ENABLED(CONFIG_LATE_CBMEM_INIT)
 unsigned long get_top_of_ram(void)
 {

src/southbridge/amd/sb700/lpc.c

@@ -61,10 +61,12 @@ static void lpc_init(device_t dev)
 	isa_dma_init();
 #endif
 
-	/* Enable DMA transaction on the LPC bus */
+	if (!IS_ENABLED(CONFIG_SOUTHBRIDGE_AMD_SB700_DISABLE_ISA_DMA)) {
-	byte = pci_read_config8(dev, 0x40);
+		/* Enable DMA transaction on the LPC bus */
-	byte |= (1 << 2);
+		byte = pci_read_config8(dev, 0x40);
-	pci_write_config8(dev, 0x40, byte);
+		byte |= (1 << 2);
+		pci_write_config8(dev, 0x40, byte);
+	}
 
 	/* Disable the timeout mechanism on LPC */
 	byte = pci_read_config8(dev, 0x48);
@@ -85,11 +87,13 @@ static void lpc_init(device_t dev)
 	cmos_check_update_date();
 }
 
+#if (!IS_ENABLED(CONFIG_EARLY_CBMEM_INIT))
 int acpi_get_sleep_type(void)
 {
 	u16 tmp = inw(ACPI_PM1_CNT_BLK);
 	return ((tmp & (7 << 10)) >> 10);
 }
+#endif
 
 #if IS_ENABLED(CONFIG_LATE_CBMEM_INIT)
 void backup_top_of_ram(uint64_t ramtop)

src/southbridge/amd/sb700/sb700.h

@@ -2,6 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -75,6 +76,8 @@ void sb7xx_51xx_setup_sata_phys(struct device *dev);
 
 #endif
 
+void set_lpc_sticky_ctl(bool enable);
+
 int s3_save_nvram_early(u32 dword, int size, int  nvram_pos);
 int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos);
 

src/southbridge/amd/sb700/spi.c

@@ -0,0 +1,148 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ * Copyright (C) 2012 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <stdint.h>
+#include <stdlib.h>
+#include <string.h>
+#include <arch/io.h>
+#include <console/console.h>
+#include <spi-generic.h>
+#include <spi_flash.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+
+#define AMD_SB_SPI_TX_LEN 8
+
+static uint32_t get_spi_bar(void)
+{
+	device_t dev;
+
+	dev = dev_find_slot(0, PCI_DEVFN(0x14, 3));
+	return pci_read_config32(dev, 0xa0) & ~0x1f;
+}
+
+void spi_init(void)
+{
+	/* Not needed */
+}
+
+unsigned int spi_crop_chunk(unsigned int cmd_len, unsigned int buf_len)
+{
+	return min(AMD_SB_SPI_TX_LEN - cmd_len, buf_len);
+}
+
+static void reset_internal_fifo_pointer(void)
+{
+	uint32_t spibar = get_spi_bar();
+
+	do {
+		write8((void *)(spibar + 2),
+		read8((void *)(spibar + 2)) | 0x10);
+	} while (read8((void *)(spibar + 0xd)) & 0x7);
+}
+
+static void execute_command(void)
+{
+	uint32_t spibar = get_spi_bar();
+
+	write8((void *)(spibar + 2), read8((void *)(spibar + 2)) | 1);
+
+	while ((read8((void *)(spibar + 2)) & 1) &&
+		(read8((void *)(spibar+3)) & 0x80));
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	/* Handled internally by the SB700 */
+	return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+	/* Handled internally by the SB700 */
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs)
+{
+	struct spi_slave *slave = malloc(sizeof(*slave));
+
+	if (!slave) {
+		return NULL;
+	}
+
+	memset(slave, 0, sizeof(*slave));
+
+	return slave;
+}
+
+int spi_xfer(struct spi_slave *slave, const void *dout,
+		unsigned int bytesout, void *din, unsigned int bytesin)
+{
+	/* First byte is cmd which cannot be sent through the FIFO. */
+	u8 cmd = *(u8 *)dout++;
+	u8 readoffby1;
+	u8 readwrite;
+	u8 count;
+
+	uint32_t spibar = get_spi_bar();
+
+	bytesout--;
+
+	/*
+	 * Check if this is a write command attempting to transfer more bytes
+	 * than the controller can handle. Iterations for writes are not
+	 * supported here because each SPI write command needs to be preceded
+	 * and followed by other SPI commands, and this sequence is controlled
+	 * by the SPI chip driver.
+	 */
+	if (bytesout > AMD_SB_SPI_TX_LEN) {
+		printk(BIOS_DEBUG, "FCH SPI: Too much to write. Does your SPI chip driver use"
+		     " spi_crop_chunk()?\n");
+		return -1;
+	}
+
+	readoffby1 = bytesout ? 0 : 1;
+
+	readwrite = (bytesin + readoffby1) << 4 | bytesout;
+	write8((void *)(spibar + 1), readwrite);
+	write8((void *)(spibar + 0), cmd);
+
+	reset_internal_fifo_pointer();
+	for (count = 0; count < bytesout; count++, dout++) {
+		write8((void *)(spibar + 0x0C), *(u8 *)dout);
+	}
+
+	reset_internal_fifo_pointer();
+	execute_command();
+
+	reset_internal_fifo_pointer();
+	/* Skip the bytes we sent. */
+	for (count = 0; count < bytesout; count++) {
+		cmd = read8((void *)(spibar + 0x0C));
+	}
+
+	reset_internal_fifo_pointer();
+	for (count = 0; count < bytesin; count++, din++) {
+		*(u8 *)din = read8((void *)(spibar + 0x0C));
+	}
+
+	return 0;
+}

src/southbridge/amd/sb700/spi.h

@@ -0,0 +1,21 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+int spi_claim_bus(struct spi_slave *slave);
+void spi_release_bus(struct spi_slave *slave);