a few tweaks etc.

Still probably wrong.


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1156 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
This commit is contained in:
Ronald G. Minnich 2003-09-27 04:18:31 +00:00
parent 6e5fe1d6fe
commit 864a3d3474
1 changed files with 7 additions and 6 deletions

View File

@ -371,6 +371,8 @@ static void sdram_set_registers(const struct mem_controller *ctrl) {
0x0000, 0x8088, 0xe0ee,
0xffff // end mark
};
static cont uint8_t ramregs[] = {0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
0x56, 0x57};
device_t north = 0;
uint8_t c, r;
@ -514,7 +516,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl) {
* Find the first bank with DIMM equipped. */
/* Maximum possible memory in bank 0, none in other banks.
* Starting from bank 0, we's fill 0 in these registers
* Starting from bank 0, we fill 0 in these registers
* until memory is found. */
pci_write_config8(north,0x5A, 0xff);
pci_write_config8(north,0x5B, 0xff);
@ -526,8 +528,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl) {
pci_write_config8(north,0x57, 0xff);
dumpnorth(north);
print_err("MA\r\n");
/* this code is broken ... ignores 56, 57 */
for(c = 0x5a; c < 0x60; c++) {
for(c = 0; c < 8; c++) {
/* Write different values to 0 and 8, then read from 0.
* If values of address 0 match, we have something there. */
print_err("write to 0\r\n");
@ -542,11 +543,11 @@ static void sdram_set_registers(const struct mem_controller *ctrl) {
if (*(volatile unsigned long *) 0 != 0x12345678) {
print_err("no memory in this bank\r\n");
/* No memory in this bank. Tell it to the bridge. */
pci_write_config8(north,c, 0);
pci_write_config8(north,ramregs[c], 0);
} else {
uint8_t best = 0;
/* Detect MA mapping type of the first bank. */
/* Detect MA mapping type of the bank. */
for(r = 0; r < 3; r++) {
volatile unsigned long esi = 0;
@ -571,7 +572,7 @@ static void sdram_set_registers(const struct mem_controller *ctrl) {
eax >>= 1;
}
print_err(" done read to eax\r\n");
eax = 0;
eax = * (unsigned long *)0;
/* oh boy ... what is this.
movl 0, %eax
cmpl %eax, %esi